NIEOI-01/AD/26-27/01

Hire and labour charges for Supplying and Installation of Hanger structure Dormitory shed for Govt official / N.G.O / Press & Publicity etc with fire retardant roof and doors at front facade along with wooden flooring, carpeting, Water Proof and fire retardant with necessary accessories using approved Materials, Gauge Wall Thickness including fitting, fixing and cost of all materials, labours, carriages and handling all complete at different places of Sagar Island as per direction. for ensuing G. S. Mela- 2027 under Alipore Division P.H.E. Dte. The specification of Hanger as follows: 1) The hanger must be able to withstand a 100km/h wind without any damage and remain securely attached to the ground. The hanger must provide good protection against dust, wind, rain, insects and small crawling fauna. It should be fire protection system. The hanger must be fire retardant to a level that allows users to evacuate form inside. With wooden flooring, carpeting, 2) The hanger to be completely leak proof. Hanger structure materials using high class PVC coated fire retardant fabric. Frame structure to be formed by Column and Beam to ensure the longitudinal stability arrange by column bracing, roof bracing and runners. The loading pass to foundation through column and beam connected to one another with bracket, gussets, cleats, hinges as per design with necessary bolts and nuts, metals arc welding. The column should be fixes on sufficient foundation. Hanger are used for protection from the weather and direct sunlight. They are a very efficient use of space, allowing for access to the full width of the hanger. Hanger should be weatherproof and can withstand more extreme weather such as rain and high winds. Hanger cladding should protects from outside elements. Hanger insulation should be allows to control the atmosphere within hanger. 3) The stitches can be waterproofed with tape on the inner side where required. The seams must be oriented to facilitate the unimpeded runoff of rain: avoid creating water lines or water pockets. The ropes with a minimum tensile strength of 3000 N. All ropes are tensioned by sliding on the hanger side, or the shade-fly side. The grain of the wooden runners must run lengthwise in the runner. The holes must be adapted to the good running and blocking of the ropes. 4) The hanger should be equipped with sufficient outer height, Sufficient height of side wall, Sufficient inner height not less than 10ft, Number of windows as directed, Number of door as directed, Mosquito nets in windows 5) Size of Hanger 96ft x 20ft of minimum celing height 10ft.

Hire and labour charges for Supplying and Installation of Hanger structure Dormitory shed for Govt official / N.G.O / Press & Publicity etc with fire retardant roof and doors at front facade along with wooden flooring, carpeting, Water Proof and fire retardant with necessary accessories using approved Materials, Gauge Wall Thickness including fitting, fixing and cost of all materials, labours, carriages and handling all complete at different places of Lot-8, Namkhana, Kolkata etc as per direction. for ensuing G. S. Mela- 2027 under Alipore Division P.H.E. Dte. The specification of Hanger as follows: 1) The hanger must be able to withstand a 100km/h wind without any damage and remain securely attached to the ground. The hanger must provide good protection against dust, wind, rain, insects and small crawling fauna. It should be fire protection system. The hanger must be fire retardant to a level that allows users to evacuate form inside. With wooden flooring, carpeting, 2) The hanger to be completely leak proof. Hanger structure materials using high class PVC coated fire retardant fabric. Frame structure to be formed by Column and Beam to ensure the longitudinal stability arrange by column bracing, roof bracing and runners. The loading pass to foundation through column and beam connected to one another with bracket, gussets, cleats, hinges as per design with necessary bolts and nuts, metals arc welding. The column should be fixes on sufficient foundation. Hanger are used for protection from the weather and direct sunlight. They are a very efficient use of space, allowing for access to the full width of the hanger. Hanger should be weatherproof and can withstand more extreme weather such as rain and high winds. Hanger cladding should protects from outside elements. Hanger insulation should be allows to control the atmosphere within hanger. 3) The stitches can be waterproofed with tape on the inner side where required. The seams must be oriented to facilitate the unimpeded runoff of rain: avoid creating water lines or water pockets. The ropes with a minimum tensile strength of 3000 N. All ropes are tensioned by sliding on the hanger side, or the shade-fly side. The grain of the wooden runners must run lengthwise in the runner. The holes must be adapted to the good running and blocking of the ropes. 4) The hanger should be equipped with sufficient outer height, Sufficient height of side wall, Sufficient inner height not less than 10ft, Number of windows as directed, Number of door as directed, Mosquito nets in windows 5) Size of Hanger 96ft x 20ft of minimum celing height 10ft.

Hire and labour charges for Supplying and Installation of Hanger structure Dormitory shed for Govt official / N.G.O / Press & Publicity etc with fire retardant roof and doors at front facade along with wooden flooring, carpeting, Water Proof and fire retardant with necessary accessories using approved Materials, Gauge Wall Thickness including fitting, fixing and cost of all materials, labours, carriages and handling all complete at different places of Sagar Island as per direction. for ensuing G. S. Mela- 2027 under Alipore Division P.H.E. Dte. The specification of Hanger as follows: 1) The hanger must be able to withstand a 100km/h wind without any damage and remain securely attached to the ground. The hanger must provide good protection against dust, wind, rain, insects and small crawling fauna. It should be fire protection system. The hanger must be fire retardant to a level that allows users to evacuate form inside. With wooden flooring, carpeting, 2) The hanger to be completely leak proof. Hanger structure materials using high class PVC coated fire retardant fabric. Frame structure to be formed by Column and Beam to ensure the longitudinal stability arrange by column bracing, roof bracing and runners. The loading pass to foundation through column and beam connected to one another with bracket, gussets, cleats, hinges as per design with necessary bolts and nuts, metals arc welding. The column should be fixes on sufficient foundation. Hanger are used for protection from the weather and direct sunlight. They are a very efficient use of space, allowing for access to the full width of the hanger. Hanger should be weatherproof and can withstand more extreme weather such as rain and high winds. Hanger cladding should protects from outside elements. Hanger insulation should be allows to control the atmosphere within hanger. 3) The stitches can be waterproofed with tape on the inner side where required. The seams must be oriented to facilitate the unimpeded runoff of rain: avoid creating water lines or water pockets. The ropes with a minimum tensile strength of 3000 N. All ropes are tensioned by sliding on the hanger side, or the shade-fly side. The grain of the wooden runners must run lengthwise in the runner. The holes must be adapted to the good running and blocking of the ropes. 4) The hanger should be equipped with sufficient outer height, Sufficient height of side wall, Sufficient inner height not less than 10ft, Number of windows as directed, Number of door as directed, Mosquito nets in windows 5) Size of Hanger 72ft x 20ft of minimum celing height 10ft.

Hire and labour charges for Supplying and Installation of Hanger structure Dormitory shed for Govt official / N.G.O / Press & Publicity etc with fire retardant roof and doors at front facade along with wooden flooring, carpeting, Water Proof and fire retardant with necessary accessories using approved Materials, Gauge Wall Thickness including fitting, fixing and cost of all materials, labours, carriages and handling all complete at different places of Lot-8, Namkhana, Kolkata etc as per direction. for ensuing G. S. Mela- 2027 under Alipore Division P.H.E. Dte. The specification of Hanger as follows: 1) The hanger must be able to withstand a 100km/h wind without any damage and remain securely attached to the ground. The hanger must provide good protection against dust, wind, rain, insects and small crawling fauna. It should be fire protection system. The hanger must be fire retardant to a level that allows users to evacuate form inside. With wooden flooring, carpeting, 2) The hanger to be completely leak proof. Hanger structure materials using high class PVC coated fire retardant fabric. Frame structure to be formed by Column and Beam to ensure the longitudinal stability arrange by column bracing, roof bracing and runners. The loading pass to foundation through column and beam connected to one another with bracket, gussets, cleats, hinges as per design with necessary bolts and nuts, metals arc welding. The column should be fixes on sufficient foundation. Hanger are used for protection from the weather and direct sunlight. They are a very efficient use of space, allowing for access to the full width of the hanger. Hanger should be weatherproof and can withstand more extreme weather such as rain and high winds. Hanger cladding should protects from outside elements. Hanger insulation should be allows to control the atmosphere within hanger. 3) The stitches can be waterproofed with tape on the inner side where required. The seams must be oriented to facilitate the unimpeded runoff of rain: avoid creating water lines or water pockets. The ropes with a minimum tensile strength of 3000 N. All ropes are tensioned by sliding on the hanger side, or the shade-fly side. The grain of the wooden runners must run lengthwise in the runner. The holes must be adapted to the good running and blocking of the ropes. 4) The hanger should be equipped with sufficient outer height, Sufficient height of side wall, Sufficient inner height not less than 10ft, Number of windows as directed, Number of door as directed, Mosquito nets in windows 5) Size of Hanger 72ft x 20ft of minimum celing height 10ft.

Hire and labour charges for Supplying and Installation of Hanger structure Dormitory shed for Govt official / N.G.O / Press & Publicity etc with fire retardant roof and doors at front facade along with wooden flooring, carpeting, Water Proof and fire retardant with necessary accessories using approved Materials, Gauge Wall Thickness including fitting, fixing and cost of all materials, labours, carriages and handling all complete at different places of Sagar Island as per direction. for ensuing G. S. Mela- 2027 under Alipore Division P.H.E. Dte. The specification of Hanger as follows: 1) The hanger must be able to withstand a 100km/h wind without any damage and remain securely attached to the ground. The hanger must provide good protection against dust, wind, rain, insects and small crawling fauna. It should be fire protection system. The hanger must be fire retardant to a level that allows users to evacuate form inside. With wooden flooring, carpeting, 2) The hanger to be completely leak proof. Hanger structure materials using high class PVC coated fire retardant fabric. Frame structure to be formed by Column and Beam to ensure the longitudinal stability arrange by column bracing, roof bracing and runners. The loading pass to foundation through column and beam connected to one another with bracket, gussets, cleats, hinges as per design with necessary bolts and nuts, metals arc welding. The column should be fixes on sufficient foundation. Hanger are used for protection from the weather and direct sunlight. They are a very efficient use of space, allowing for access to the full width of the hanger. Hanger should be weatherproof and can withstand more extreme weather such as rain and high winds. Hanger cladding should protects from outside elements. Hanger insulation should be allows to control the atmosphere within hanger. 3) The stitches can be waterproofed with tape on the inner side where required. The seams must be oriented to facilitate the unimpeded runoff of rain: avoid creating water lines or water pockets. The ropes with a minimum tensile strength of 3000 N. All ropes are tensioned by sliding on the hanger side, or the shade-fly side. The grain of the wooden runners must run lengthwise in the runner. The holes must be adapted to the good running and blocking of the ropes. 4) The hanger should be equipped with sufficient outer height, Sufficient height of side wall, Sufficient inner height not less than 10ft, Number of windows as directed, Number of door as directed, Mosquito nets in windows 5) Size of Hanger 48ft x 20ft of minimum celing height 10ft.

Hire and labour charges for Supplying and Installation of Hanger structure Dormitory shed for Govt official / N.G.O / Press & Publicity etc with fire retardant roof and doors at front facade along with wooden flooring, carpeting, Water Proof and fire retardant with necessary accessories using approved Materials, Gauge Wall Thickness including fitting, fixing and cost of all materials, labours, carriages and handling all complete at different places of Lot-8, Namkhana, Kolkata etc as per direction. for ensuing G. S. Mela- 2027 under Alipore Division P.H.E. Dte. The specification of Hanger as follows: 1) The hanger must be able to withstand a 100km/h wind without any damage and remain securely attached to the ground. The hanger must provide good protection against dust, wind, rain, insects and small crawling fauna. It should be fire protection system. The hanger must be fire retardant to a level that allows users to evacuate form inside. With wooden flooring, carpeting, 2) The hanger to be completely leak proof. Hanger structure materials using high class PVC coated fire retardant fabric. Frame structure to be formed by Column and Beam to ensure the longitudinal stability arrange by column bracing, roof bracing and runners. The loading pass to foundation through column and beam connected to one another with bracket, gussets, cleats, hinges as per design with necessary bolts and nuts, metals arc welding. The column should be fixes on sufficient foundation. Hanger are used for protection from the weather and direct sunlight. They are a very efficient use of space, allowing for access to the full width of the hanger. Hanger should be weatherproof and can withstand more extreme weather such as rain and high winds. Hanger cladding should protects from outside elements. Hanger insulation should be allows to control the atmosphere within hanger. 3) The stitches can be waterproofed with tape on the inner side where required. The seams must be oriented to facilitate the unimpeded runoff of rain: avoid creating water lines or water pockets. The ropes with a minimum tensile strength of 3000 N. All ropes are tensioned by sliding on the hanger side, or the shade-fly side. The grain of the wooden runners must run lengthwise in the runner. The holes must be adapted to the good running and blocking of the ropes. 4) The hanger should be equipped with sufficient outer height, Sufficient height of side wall, Sufficient inner height not less than 10ft, Number of windows as directed, Number of door as directed, Mosquito nets in windows 5) Size of Hanger 48ft x 20ft of minimum celing height 10ft.

Hire and labour charges for Supplying and Installation of Hanger structure Dormitory shed for Govt official / N.G.O / Press & Publicity etc with fire retardant roof and doors at front facade along with wooden flooring, carpeting, Water Proof and fire retardant with necessary accessories using approved Materials, Gauge Wall Thickness including fitting, fixing and cost of all materials, labours, carriages and handling all complete at different places of Sagar Island as per direction. for ensuing G. S. Mela- 2027 under Alipore Division P.H.E. Dte. The specification of Hanger as follows: 1) The hanger must be able to withstand a 100km/h wind without any damage and remain securely attached to the ground. The hanger must provide good protection against dust, wind, rain, insects and small crawling fauna. It should be fire protection system. The hanger must be fire retardant to a level that allows users to evacuate form inside. With wooden flooring, carpeting, 2) The hanger to be completely leak proof. Hanger structure materials using high class PVC coated fire retardant fabric. Frame structure to be formed by Column and Beam to ensure the longitudinal stability arrange by column bracing, roof bracing and runners. The loading pass to foundation through column and beam connected to one another with bracket, gussets, cleats, hinges as per design with necessary bolts and nuts, metals arc welding. The column should be fixes on sufficient foundation. Hanger are used for protection from the weather and direct sunlight. They are a very efficient use of space, allowing for access to the full width of the hanger. Hanger should be weatherproof and can withstand more extreme weather such as rain and high winds. Hanger cladding should protects from outside elements. Hanger insulation should be allows to control the atmosphere within hanger. 3) The stitches can be waterproofed with tape on the inner side where required. The seams must be oriented to facilitate the unimpeded runoff of rain: avoid creating water lines or water pockets. The ropes with a minimum tensile strength of 3000 N. All ropes are tensioned by sliding on the hanger side, or the shade-fly side. The grain of the wooden runners must run lengthwise in the runner. The holes must be adapted to the good running and blocking of the ropes. 4) The hanger should be equipped with sufficient outer height, Sufficient height of side wall, Sufficient inner height not less than 10ft, Number of windows as directed, Number of door as directed, Mosquito nets in windows 5) Size of Hanger 24ft x 20ft of minimum celing height 10ft.

Hire and labour charges for Supplying and Installation of Hanger structure Dormitory shed for Govt official / N.G.O / Press & Publicity etc with fire retardant roof and doors at front facade along with wooden flooring, carpeting, Water Proof and fire retardant with necessary accessories using approved Materials, Gauge Wall Thickness including fitting, fixing and cost of all materials, labours, carriages and handling all complete at different places of Lot-8, Namkhana, Kolkata etc as per direction. for ensuing G. S. Mela- 2027 under Alipore Division P.H.E. Dte. The specification of Hanger as follows: 1) The hanger must be able to withstand a 100km/h wind without any damage and remain securely attached to the ground. The hanger must provide good protection against dust, wind, rain, insects and small crawling fauna. It should be fire protection system. The hanger must be fire retardant to a level that allows users to evacuate form inside. With wooden flooring, carpeting, 2) The hanger to be completely leak proof. Hanger structure materials using high class PVC coated fire retardant fabric. Frame structure to be formed by Column and Beam to ensure the longitudinal stability arrange by column bracing, roof bracing and runners. The loading pass to foundation through column and beam connected to one another with bracket, gussets, cleats, hinges as per design with necessary bolts and nuts, metals arc welding. The column should be fixes on sufficient foundation. Hanger are used for protection from the weather and direct sunlight. They are a very efficient use of space, allowing for access to the full width of the hanger. Hanger should be weatherproof and can withstand more extreme weather such as rain and high winds. Hanger cladding should protects from outside elements. Hanger insulation should be allows to control the atmosphere within hanger. 3) The stitches can be waterproofed with tape on the inner side where required. The seams must be oriented to facilitate the unimpeded runoff of rain: avoid creating water lines or water pockets. The ropes with a minimum tensile strength of 3000 N. All ropes are tensioned by sliding on the hanger side, or the shade-fly side. The grain of the wooden runners must run lengthwise in the runner. The holes must be adapted to the good running and blocking of the ropes. 4) The hanger should be equipped with sufficient outer height, Sufficient height of side wall, Sufficient inner height not less than 10ft, Number of windows as directed, Number of door as directed, Mosquito nets in windows 5) Size of Hanger 24ft x 20ft of minimum celing height 10ft.

Hire and labour charges for Supplying and Installation of Hanger structure Dormitory shed for Govt official / N.G.O / Press & Publicity etc with fire retardant roof and doors at front facade along with wooden flooring, carpeting, Water Proof and fire retardant with necessary accessories using approved Materials, Gauge Wall Thickness including fitting, fixing and cost of all materials, labours, carriages and handling all complete at different places of Sagar Island as per direction. for ensuing G. S. Mela- 2027 under Alipore Division P.H.E. Dte. The specification of Hanger as follows: 1) The hanger must be able to withstand a 100km/h wind without any damage and remain securely attached to the ground. The hanger must provide good protection against dust, wind, rain, insects and small crawling fauna. It should be fire protection system. The hanger must be fire retardant to a level that allows users to evacuate form inside. With wooden flooring, carpeting, 2) The hanger to be completely leak proof. Hanger structure materials using high class PVC coated fire retardant fabric. Frame structure to be formed by Column and Beam to ensure the longitudinal stability arrange by column bracing, roof bracing and runners. The loading pass to foundation through column and beam connected to one another with bracket, gussets, cleats, hinges as per design with necessary bolts and nuts, metals arc welding. The column should be fixes on sufficient foundation. Hanger are used for protection from the weather and direct sunlight. They are a very efficient use of space, allowing for access to the full width of the hanger. Hanger should be weatherproof and can withstand more extreme weather such as rain and high winds. Hanger cladding should protects from outside elements. Hanger insulation should be allows to control the atmosphere within hanger. 3) The stitches can be waterproofed with tape on the inner side where required. The seams must be oriented to facilitate the unimpeded runoff of rain: avoid creating water lines or water pockets. The ropes with a minimum tensile strength of 3000 N. All ropes are tensioned by sliding on the hanger side, or the shade-fly side. The grain of the wooden runners must run lengthwise in the runner. The holes must be adapted to the good running and blocking of the ropes. 4) The hanger should be equipped with sufficient outer height, Sufficient height of side wall, Sufficient inner height not less than 10ft, Number of windows as directed, Number of door as directed, Mosquito nets in windows 5) Size of Hanger 12ft x 20ft of minimum celing height 10ft.

Hire and labour charges for Supplying and Installation of Hanger structure Dormitory shed for Govt official / N.G.O / Press & Publicity etc with fire retardant roof and doors at front facade along with wooden flooring, carpeting, Water Proof and fire retardant with necessary accessories using approved Materials, Gauge Wall Thickness including fitting, fixing and cost of all materials, labours, carriages and handling all complete at different places of Lot-8, Namkhana, Kolkata etc as per direction. for ensuing G. S. Mela- 2027 under Alipore Division P.H.E. Dte. The specification of Hanger as follows: 1) The hanger must be able to withstand a 100km/h wind without any damage and remain securely attached to the ground. The hanger must provide good protection against dust, wind, rain, insects and small crawling fauna. It should be fire protection system. The hanger must be fire retardant to a level that allows users to evacuate form inside. With wooden flooring, carpeting, 2) The hanger to be completely leak proof. Hanger structure materials using high class PVC coated fire retardant fabric. Frame structure to be formed by Column and Beam to ensure the longitudinal stability arrange by column bracing, roof bracing and runners. The loading pass to foundation through column and beam connected to one another with bracket, gussets, cleats, hinges as per design with necessary bolts and nuts, metals arc welding. The column should be fixes on sufficient foundation. Hanger are used for protection from the weather and direct sunlight. They are a very efficient use of space, allowing for access to the full width of the hanger. Hanger should be weatherproof and can withstand more extreme weather such as rain and high winds. Hanger cladding should protects from outside elements. Hanger insulation should be allows to control the atmosphere within hanger. 3) The stitches can be waterproofed with tape on the inner side where required. The seams must be oriented to facilitate the unimpeded runoff of rain: avoid creating water lines or water pockets. The ropes with a minimum tensile strength of 3000 N. All ropes are tensioned by sliding on the hanger side, or the shade-fly side. The grain of the wooden runners must run lengthwise in the runner. The holes must be adapted to the good running and blocking of the ropes. 4) The hanger should be equipped with sufficient outer height, Sufficient height of side wall, Sufficient inner height not less than 10ft, Number of windows as directed, Number of door as directed, Mosquito nets in windows 5) Size of Hanger 12ft x 20ft of minimum celing height 10ft.