36/ EE/PMD/PHED OF 2022-2023/Sl3

Amount

PART A

Supply delivery of Gaseous chlorination system (1W+1S) capacity 4KG/HR complete accessories,MCC. Detail specification as per BOQ of NIET and as per approved GA drawing by EIC

Cable for gaseous Chlorination system (from PDB to MCC of chlorine pump.):- Supplying 1.1 KV grade 4 core 10 sq. mm XLPE insulated Al. Armoured cable specification as per IS7098

Installation testing and commissioning of above supplied Gaseous chlorination system, All pumping machinery,MCC making masonery/RCC pump motor/MCC based foundation as per departmental approved drawing, suction line, delivery line, common header, valves, including supply and delivery at site as required of all erection materials All size Cable trey,laying of cable through trey within pump house and with 8nos brick protechtion when lay through under ground trench(460mm average width x 760 average depth) with supplying ,cable compression gland,cable lugs socket, ,finishing cable end, MS short piece, Flanges, bends, specials, bolts & nuts, dismantling joint / mechanical joint gasket,rubber insertion,gland packing,grease,construction of masonery pipe support ,valve support,Insulating rubber mat, chequers plate as required,etc all electrical and earthing connection with motors ,pannel etc as required to make installation complete as per direction of EIC. (all materials required for installation is considered, cable trey, compressor glands, connection of earth busbar with equipments others required items to be supplied at the time of installation of above pumping machineries and Trial Operation, maintenance and guarding of the entire New installation for 90 days Painting of installation by anticorrosive primer ,paint complete after dismantling existing old system or installation new system and adjusting space with old system as per site situation and as per direction of EIC)

Supply delivery At WTP as per requirement and direction of EIC Automatic chlorine leak absorption and Scrubber system comprising of:- 1. FRP half hood for chlorine tonner, centrifugal fan, Evoqua make chlorine leak detection unit with two leak sensors, as per SOQ attaced of NIET and as per approved GA drawing by EIC, Perforated GI cable trey as required for installation – 1 lot , Armoured and flexible power and control cable as required for installation, MS & GI supports as required for installation as per direction of EIC.

Installation and commissioning of above supplied Automatic chlorine leak absorption system at WTP with laying all required control cable, power cable, pipe line ,all jointing items, minor electrical items masonery work . l. Positioning of equipment on foundation. 2. Civil construction of foundation. 3. Unloading of equipment at site store. 4. Shifting of equipment from site store to position of installation. 5. Safe custody of materials at site. 6. Construction of shed of leak absorption system with illumination arrangement. 7. Supply of power to MCC. 8. Supply of caustic for commissioning. 9. 90 Daily operation and maintenance after trial run and commissioning. 10. Supply of any materials for tonner manifold as per direction of EIC

Add GST @ 18%

Add CESS @ 1%

EASTERN INDIA SALES AND SERVICE

MAHADEV ENTERPRISE