PROVN OF GUARD ROOM WITH ATTACHED TOILET AND BATHROOM IN 620 EME BN, PROVN OF 01XSHED FOR WORKERS AMENITY AT 20 MTN DOU AND PROVN OF 33X GEYSERS AND 06X WATER COOLERS WITH FITTINGS AT BLDG NO P-1, P-2, P-7 AND P-56 OF 520 ASC BN UNDER GE (SOUTH) BINN

Amount

Schedule 'A'

M&L for Surface excavation n exc 30cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation or shafts, manhole, sewage line etc and getting out in soft /loose complete all as specified and as directed.

M&L 75 mm thick Bricks sub class B laid flat in floor , old size brick bedded and jointed in CM (1:6) pointed in CM (1:3) complete all as specified and as directed.

M & L for plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for RCC M25 (Design mix) in foundations, including rafts, footings and mass concrete complete all as specified and as directed.

M&L formwork to sides of concrete foundations, footings, bases of columns, raft and matt beams sides and soffits (if any) of foundation and plinth beams; and similar work , vertical or to batter, flat complete all as specified and directed.

M&L for providing reinforced cement concrete grade M25(Design mix) in pillars, posts, fencing posts, straining or terminal posts, struts etc for fencing, with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and directed

M&L formwork to sides of pillars post, struts, piers, columns and stanctions square vor rectangular in section and similar works for rough finished surfaces of concrete in flat complete all as specified and directed.

M/L for RCC M25 (Design mix) in beams, cantilevers, bressurnmers lintels over 1.5m span complete all as specified and directed.

M & L for formwork to sides and soffits of floor or roof beam, lintels,cantilevers,shelves including supports etc and similar work for fair finished surface of concrete in flat complete as specified and directed.

M & L for brick work with sub class 'B' bricks, straight or curved on plan to any radious in wall built in CM(1:6) complete all as specified and directed

M & L for brick work with sub class 'B' bricks, straight or curved on plan to any radious in half brick thick wall built in CM(1:4) complete all as specified and directed

M&L for reinforced Cement Concrete M 25 design mix in Chajjas and the like complete all as specified and directed

M&L for fair finished flat Form work to Chajjas, water troughs and similar items including edges complete all as specified and directed

M&L for TMT bars 10mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for Mild steel TMT bars 6 to 8mm dia, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9mm dia, or securing with clips complete all as specified and directed.

M&L rendering 15 mm thick in cm 1:6 on fair faces of brick work or concrete surfaces finishing surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L rendering 15 mm thick in cm 1:4 on fair faces of brick work or concrete surfaces finishing surfaces even and smooth without using extra cement complete all as specified and as directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.38 sqm (Ist quality ) conforming to IS-13755, as in floor set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M & L for glazed ceramic coloured tiles 450 x 300 x 7 mm thick (Ist quality) conforming to IS-13753, as in vertical surface such as skirting/dado set in neat cement slurry and pointed in coloured cement to match the surface, including 10mm thick rendering to receive tiles in CM (1:4) complete all as specified and as directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) in sub base of flooring. complete all as specified and directed.

M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of water thinable oil emulsion distemper white or tinted of approved shade over a coat of alkali resisting primer on wall surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of water thinable oil emulsion distemper white or tinted of approved shade over a coat of alkali resisting primer on wall surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of exterior acrylic emulsion white or tinted of approved shade over a coat of exterior acrylic primer on wall surfaces complete all as specified and directed.

S&F factory made Z section steel window with side hung shutter frame including box type hinge with steel handle and steel peg stay, etc. complete with glazing bars , dovetailed or welded including a shop coat priming complete all as specified and directed.

S&F factory made Z section steel window with side hung shutter frame including box type hinge with steel handle and steel peg stay, etc. complete without glazing bars , dovetailed or welded including a shop coat priming complete all as specified and directed.

S&F factory made steel ventilator with top hung shutter frame including box type hinge with steel handle and steel peg stay, etc. complete with glazing bars , dovetailed or welded including a shop coat priming complete all as specified and directed.

S&F factory made steel ventilator with top hung shutter frame including box type hinge with steel handle and steel peg stay, etc. complete without glazing bars , dovetailed or welded including a shop coat priming complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth including preparation of steel surfaces complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.

Returning filling in inluding spreeding, leveling, watering and well ramming in layers not exc 25 cm thick in soft /loose soil complete all as directed.

Removing excvated material (Soil) not exceeding 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M & L for Sand filling under floor or in foundation including watering ,ramming and cosolidation in layers complete all as specified and as directed.

M&L for 75mm thick plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection and footpath finished even and smooth without using extra cement, including making joints to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:2 by weight complete all as specified and as directed.

S&F 4mm thick non-Asbestos fibre cement building board( E-board) false ceiling with board of size 600x600mm with powder coated GI snap grid frame work including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0/Cement mortar 1:3 complete all as specified and directed including all necessary drilling and necessary arrangement to fix electrical items as under:- (a) 27x27x0.55mm thick GI angle powder coated duly plugged @ 600mm centre to centre along perimeter of wall. (b) 25x25x0.55mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders(n.exc 1.2mtr length) with adjustable clamps and dash true fastners plugging in RCC slab/A.I Runner of slopped roof placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick non-Asbestos fibre cement building board( E-board) false ceiling with board of size 600x600mm of approved texure and finished complete with two coats of water thinble oil emulsion distemper over a coat of Acrylic primer on ceiling. NOTE: The complete ceiling work shall be done as per manufactures instruction and as directed.

S&F factory made Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, supplying and fixing in opening with fittings as per specification & drawing complete.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement and supply & fixing in the frame at site as per specification and shown on drawing SSR Part-II (2004) all as specified..

S&F aluminium alloy, anodised, sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.

S&F aluminium anodised barrel Tower Bolts of extruded section 200 mm long fixed with screws.complete all as specified and directed.

S&F aluminium anodised handles of extruded section 150mm long fixed with screws.complete all as specified and directed.

S&F stainless steel butt hinges of size 100mm long for fixing of pvc door shutter etc complete all as specified and directed.

M&L for high tensile 550 MPA yield strength Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%)and silicon (1.5%) with total mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self capping screws with EDPM seal complete all as specified and directed.

All as per above item no. 45 ditto but plain sheet.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St-240 including painted one shop coat of zinc chromate prime paint including preparation of surfaces complete all as specified and as directed.

M&L for Rolled Mild steel plates(plain or chequered) ,Channels,square cut or notched(ordinary or counter sunked) forming holes,without attachment of grade E -410-W (Gde -E-250 ) quality A , complete all as specified and directed by Engineer-in-Charge.

S&F Vitreous china wash basin, white, flat back, size 550 x 400 mm, including pair of brackets and cutting for and pinning in ends of brackets, ,32mm dia 450 long Waste pipe, including cutting for and pinning in ends of brackets or erecting stand,include for fixing taps, plugs and chains and connecting up to supply pipes, wastes or traps; screws, plugs, cement mortar, red lead cement and other subsidiary materials required for fixing.Complete all as specified and as directed.

S&F vitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including 'P' or 'S' trap and including plastic water closet seat cover with flat bottom and cover with MS Chromium plated hinge divice ISI marked complete all as specified and directed .

S&F 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to trenches, floor complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to trenches, floor complete all as specified and directed.

S&F of PVC (SWR) bend any radius suitable for 75mm bore PVC pipe jointed with solvent complete all as specified and directed.

S&F of PVC (SWR) bend any radius suitable for 110mm bore PVC pipe jointed with solvent complete all as specified and directed.

M & L for PVC (SWR) plain Floor trap of 75 mm dia., outlet with grating including jointing with solvent cement complete all as specified and directed.

M&L reinforced Cement Concrete M 25design mix for slabs supported on walls, beams and columns, in floors, roofs, landings and in shelves and the like complete all as specified and directed.

M&L Fair finished flat Form work to edges of suspended slabs such as roof slabs, floor slabs and similar work not exceeding 200 mm wide complete all as specified and directed.

M& L for providing and injecting chemical emulsion for Anti termite treatment of top surface of filled earth and poring emulsion @ of 5.0 litre per sqm by rodding and return fill the channel to match with existing surface complete all as specified and directed

M& L for providing and injecting chemical emulsion for Anti termite treatment of the backfill in contact with foundatiopn and poring emulsion @ of 7.5 litre per sqm by rodding and return fill the channel to match with existing surface complete all as specified and directed

M& L for providing and injecting chemical emulsion for Anti termite treatment of the soil along the external perimeter of of building and poring emulsion @ of 2.25 litre per sqm by rodding and return fill the channel to match with existing surface complete all as specified and directed

M& L for providing and injecting chemical emulsion for Anti termite treatment of the bottom and sides of excavation and poring emulsion @ of 5.0 litre per sqm by rodding and return fill the channel to match with existing surface complete all as specified and directed

M& L for providing and injecting chemical emulsion for Anti termite treatment of the soil under plinth protection and poring emulsion @ of 5.0 litre per sqm by rodding and return fill the channel to match with existing surface complete all as specified and directed

M&L for mild steel, plain , black sheet in hearths, covering to door shutters, covering to door chowkats (frames), chullah hoods, water tank etc. cut to side edges beded if directed , holes punched, including round headed screw, clout nails or rivets and fixed to wood or steel member etc., with plain 40 mm lap joint or welded/riveted seams including bending , turning up, mitred angles, stopped ends, outlets etc. complete all as specified and as directed.

M&L framed work as in doors or gates of angle or other section with gusset plates, rails braces etc. complete drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rail and guides) and hanging also fastening and fixing complete aal as specified and as directed.

S&F 15 mm bore steel water tubes, medium grade, galvanised with all fitings and fixed to wall, complete all as specified and directed.

S& F 20 mm bore steel water tubes, medium grade, galvanised with all fitings and fixed to wall, complete all as specified and directed.

S& F 25 mm bore steel water tubes, medium grade, galvanised with all fitings and fixed to wall, complete all as specified and directed.

S&F rotational moulded,Threelayer HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI (IS 12701-1996) marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia brass ball valve with epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms ) including fixing of inlet, outlet & overflow pipe etc, including taking down,lowering and taking out existing tank out side of site of work complete all as specified and as directed.

S & F in Fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions including taking down the existing fitting complete all as specified and as directed.

M&L for bib taps, cast copper alloy, Chromium plated with butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for bib tap 15 mm dia fancy type all as specified and as directed.

S&F Stop Valve fancy type cast copper alloy, chromium plated for 15 mm bore pipe, screwed for iron pipes or for brass ferrule etc complete all as specified and dierected.

S & F Chromium plated shower rose with shower arm 125 mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and as directed.

S&F in repair PVC connections 15mm bore size 600mm long with CP brass nuts complete all as specified and directed.

S&F chromium plated towel rail 20mm dia, 600mm long between flanges, fancy type, superior quality , fixed with brass screws with plastic cleats complete all as specified and directed.

S&F pillar taps 15mm bore, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.

M&L for 100mm thick concrete bed to drain pipe (150mm bore) with PCC (1:4:8) type D2 using 40mm graded stone aggregate including packing under and haunching aginnst the sides of pipe after they are laid jointed and tested complete all as specified and as directed.

S&F 150 mm bore reinforced Concrete pipe Class NP2 laid and jointed complete with collars complete all as specified and as directed.

M & L for plain cement concrete (1:3:6) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for rendering 15mm thick( 10mm backing and 5mm floating coat) in CM 1:4 mixed with integral water proofing compound as per manufacturer instruction on floating coat as in other than fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed. NOTE: WPC shall be measured and paid separately under respctive Item of schedule.

Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed .

M & L precast reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in cover slab of manholes, septic tank etc, set in cement mortar (1:4) including necessary form, moulds etc and including taking out/removal of existing unserviceable cover slab from manholes /septic tank complete all as directed by Engr- in- Charge .(Note :- Reinforcement shall be measured and paid separately).

S & F for Mild steel round bars 10 to 12 mm dia as in Handles of Cover slabs complete all as specified and directed.

M&L for RCC 1:1.5:3 (Nominal mix) in foundations, including rafts, footings and mass concrete complete all as specified and as directed.

M&L for providing reinforced cement concrete grade 1:1.5:3 (Nominal mix)in pillars, posts, fencing posts, straining or terminal posts, struts etc for fencing, with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and directed

M&L for flat iron fencing including cutting tops to shape as directed, drilling holes, notching for wire etc iron fillets including all necessary drilling, bolting or revetting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

M&L for 100mm PCC 1:3:6 type C-1 using 20mm graded stone agg as in sub base/paving complete all as specified and as directed.

M&L 100mm thick PCC type B2 1:2:4(40mm graded stone aggregate as in hard standing, flooring and paving etc finishing the surface even and smooth with out using extra cement and finishing the surface with brooming etc including necessary form work complete all as specfied and directed.

M&L for machine pressed ,pre-polished and chemically treated, smooth finished ,exterior graded coloured cement concrete Chequered tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 complete all as specified and directed.

M&L point wiring complete with FRLS PVC insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits and fittings, including cutting chasingin brick wall n.exc 10cm width or girth(excluding ceiling surface), pressed steel concealed terminal switch boxes not less than 1.2mm thick of reqd size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick plastic laminated sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including making good disturbed surfaces with CM(1:4) with treating the surfaces as per existing finishes complete all as specified and directed. (a) One light point controlled by one way switch 5/6 amps.

(b)All as per above but for One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.

(c)All as per above but for One Socket out let 5/6 amps point on the independent board

(d)All as per above but for One socket out let 5/6 amps point on the same board

All as per item No 90 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed.

S&F switch piano flush type 5/6 amps single pole one way complete all as specified and directed.

S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed.

S&F of socket outlet 2 in 1, 5 Pin, 5/15 amp, multipurpose 230 volt flash type complete all as specified and directed by Engr-in-Charge.

S&F switch piano flush type 15/16 amps single pole one way complete all as specified and directed.

S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.

S & F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and directed.

S & F deluxe fan electronic regulator 120/180 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and directed.

S & F Wall monted LED Tube light fitting 20W, including 02 no plastic square box for fixing of tube light with extruded aluminium housing, with integrated LED driver complete all as specified and directed.

S&F of 45 watt LED Type light fittings complete with constant current electronc driver in a single pc. deep drawn pressure die cast aluminium housing, heat resistant toughened glass ,IP-66 protection including all accessories and provision of three core PVC cable of copper conductor of size 23/.0076 and making connection complete all as specified and directed.

Supply and Fixing MCB DB double door, powder coated sheet metal enclosure, 8 way 240 volts grade single pole and neutral with 200 amps rated bus bar, IP-43 protection, fixed to wall using nuts & bolts and washer of suitable dia and grouted to wall using suitable gutties complete all as specified and as directed.

S&F in repair MCB single pole & neutral 40 amp, 415 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.

S&F MCB single pole, 6 to 32 amps rating, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.

M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete all as specified and directed.

S&F street light bracket, made out of GI pipe medium grade) 32mm bore, 1.2 m long bend to shape and fixing/grouting with wall using 2 Nos 25 x 5 mm size MS FI clamps with bolts, nuts & washers complete including drilling as necessary and two coats of Aluminium paint over a coat of Red oxide primer all as specified & directed

Supply and fix Ceiling Fans heavy duty AC single phase 230/240V of size 1200mm sweep 5 star rated including connection with .75 sqmm 3 core flexible cable up to ceiling rose complete all as specified and directed.

Supply and fix Exhaust Fans heavy duty AC single phase 230/240V of size 300mm sweep with louver including connection with .75 sqmm 3 core flexible cable up to ceiling rose complete all as specified and directed.

M&L for sand cushioning in cable trenches over & under the cable, with river washed coarse sand, as per standard practice with proper compaction (Punned thickness 18 cm) complete all as specified and directed .

M&L for brick protection for protection of cable over sand cushioning cables inside the trench by using common brunt clay building bricks sub-class “B” laid dry and flat and width wise along the axis of the trench complete all as specified and directed.

Supply and laying, jointing and testing in trenchs or passing through pipe cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, LT electric power cables (heavy duty) 1100 Volts grade with multistranded aluminium conductor of size 10 sq mm 2 core with all fixing and connecting accessories cable lugs, nut bolts,washer etc all as specified and directed.

M&L for 25mm bore gun metal gate valve with iron wheel head screwed both side complete all as specified and as directed.

M&L for 20mm bore gun metal gate valve with iron wheel head screwed both side complete all as specified and as directed.

M&L for Construction of new brick masonary valve pits of 600x600x600mm (internal dimension) with brick work in cement mortar (1:4) 40mmx40mmx6mm angle iron frame, MS handle 300mm long bent to shape and riveted to MS including excavation and earth work, concrete work 3.15mm thick MS sheet cover with MS sheet cover with locking arrangement hinges and handle rendering work, painting to all steel surface with two coat red oxide primer complete and all as specified.

S & F GI tubing light grade 40mm dia for protection of cable passing through duct/ road crossing/ on pole/ on wall etc incl all fitting and fixing of clamps made out of 25mm x 3mm flat iron and nut bolts etc. complete all specified and as directed.

M&L for concealed sub main wiring with 3 run of 4.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core cable of working voltage 1100 volts grade with stranded copper conductor drawn in PVC rigid non- metallic conduit complete all as specified and as directed. NOTE : (i) Three run of submain wiring cable alongwith 20mm PVC conduit pipe shall be measured as one unit length.

Supply and Fixing MCB DB single door, powder coated sheet metal enclosure, 2 way 240 volts grade single pole and neutral with 20 amps rated bus bar, IP-43 protection, fixed to wall using nuts & bolts and washer of suitable dia and grouted to wall using suitable gutties complete all as specified and as directed.

Supply and installed, testing and commissioning of electirc Water Heater storage vertical type,BEE 5 star rated, 25 ltr capacity 230 volts AC, 50 HZ comprising of high wattage element for instant heating.Extra inner tank of superior 304 grade, rust & shock proof ABS outer body ,non ferrous pressure plate with & including provision of PRV & grouting bolts suitable flushed to wall or any other surface including electric connection with 3 core PVC insulated, sheathed, standered copper conductor cable flexible chord for fixing complete all as directed.

Supply and fix CI stop valve 15mm dia complete all as specified and as directed.

Supply and fixing Hot and cold water connection including connection pipe complete with all necessary items complete all as direceted and specified

Supply , installation , commissioning of water cooler fully stainless steel ,electric driven single phase having approx storage and nominal cooling capacity of 40/80 ltr,including necessary civil works for installation of Water coolers,all as specified and directed.

Supply and Fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor wall mounted type fully elecronic controlled & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5 % and of capacity 1.0 KVA complete al as specified and as directed.

L. B. SHARMA

S S SHARMA