Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.7 LAccepted-AOC SHREE NIVAS LIMDA LANE JAMNAGAR GUJARAT PIN 361001 | JAMNAGAR | GUJARAT | 361001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹26.9 L+₹17,898 (0.67%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹28.2 L+₹1.4 L (5.30%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹29.9 L+₹3.2 L (11.9%)Rejected-Finance | L4 | Rejected-Finance L4 |
Tender Value
₹27 L
EMD Value
₹54,000
Closing Date
14 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Aman Bhardwaj
Military Engineer Service Garrison Engineer (AF) No.1 Air Force Station No.1 Jamnagar 361 003
PROVN OF CERTAIN WORK SERVICES AT TECH AREA UNDER AF STN JAMNAGAR
2024_MES_641849_1
8271/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Jamnagar
Please Refer Tender Documents
6 documents required · 6 mandatory
₹500
GE (AF) Jamnagar No. 1
₹54,000
Yes
1 Apr 2024
10 Feb 2024
21 Mar 2024
10 Feb 2024
14 Mar 2024
24 Feb 2024
Amount
Excavating in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and not exc 10 Sqm on plan in soft/loose soil and getting out.
Excavating in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and not exc 10 Sqm on plan in soft/disintegrated rock soil and getting out.
Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft / loose / hard / dense soil complete all as specified and as directed.
Removing excavated materials (soil) n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point.
M&L for Pre-cast cement concrete block masonry with solid blocks of cement concrete (1:5:8) using 20 mm graded stone aggregate, exc. 10 cm in width and setting in cement sand mortar (1:6), complete
M&L for cement concrete type C2 (1:3:6) using 40 mm graded stone aggregate in foundations, filling and mass-concrete
M&L for cement concrete type B1 (1:2:4) using 20 mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
M&L for reinforced cement concrete, nominal mix, type B-1, 1:2:4 , using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span
Cutting channels, grooves or rebates n exc 15cm girth, and trimming concrete surfaces with or without reinforcement.
M&L for Filleting, n exc 25 sqcm cross section, in any position and to any shape in cement mortar 1:4 including all mitres, stops, etc
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished concrete surfaces.
M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat concrete surfaces.
M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing
M&L for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.
S&F 1.6mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required
S&F mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
S&F Mild steel CRS bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
S&F Mild steel CRS bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
S&F Mild steel bolts., exc 12 nexc 20mm dia neck, purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long
S&F Rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-290 W Gde E-165
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified
M&L for 100mm thick cement concrete type D-2, (1:4:8) using 40mm graded stone aggregate as in sub floor, sub bases and pavings etc.
M&L for 25mm thick cement concrete type B-0, (1:2:4) using 12.5mm graded stone aggregate as in sub floor, sub bases, floors and pavings etc.
S&F coloured Non Skid ceramic tiles 7 to 8mm thick (squares/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM(1:6)
M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick cement sand mortar 1:4 plaster finished even and smooth without using extra cement
M&L for Rendering 10mm thick in cement snad mortar 1:4, finished even and smooth without using extra cement, on fair faces of brick work or concrete surfaces
M&L for Rendering 15mm thick in cement snad mortar 1:6, finished even and smooth without using extra cement, on fair faces of brick work or concrete surfaces
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
M&L for Rendering 15mm thick in cement snad mortar 1:4, finished even and smooth without using extra cement, on fair faces of brick work or concrete surfaces
M&L for preparation of new plastered surfaces of wall inclu pilasters/cornices etc and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/Litre and UV resistance as per IS-15489:2004 : Alkali & fungal resistant, dirt resistant, exterior paint of required shade (company Depot Tinted) with silicon additives @1.43 Litres/10 Sqm over and including priming coat of exterior primer applied @0.90 Litre 10 Sqm in camouflage patterns.
M&L Preparing newly plastered surfaces of walls and applying three coats of white washing.
M&L for repairs to chajja / roof projections / roof spouts by taking down old plaster and loose concrete and repairing with cement sand mortar 1:3 mixed with and including water proofing compound and finishing surface to match with existing surrounding , complete all as directed.
M&L Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer, on plastered surfaces, prepara-tory to distempering complete all as specified and as directed by Engineer-in-Charge.
M&L for preparing new or previously untreated steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of systehtic enemal paint over red oxide primer.
S & F Vitreous China squatting pan 'Orissa' pattern, size 580 x 440mm white with integral foot rests including P or S trap of cast iron 100mm front or back inlet, including all connections and provision of lime concrete base, complete all as specified and as directed.
S&F aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges
S & F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified
S & F for Wash basins of size 550x400 mm , Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets including cast iron brackets and following :- (a) 15mm Pillar taps, cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. (b) waste pipe, 32mm dia, 1m long, Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches (c) 32mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed
S&F Soap dish, vitreous China white, approximate size 160x 160x90mm
Grating square 150 mm size of Stainless steel.
S&F cast iron floor trap 100 mm dia of outlet, with grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4)
S & F 110mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints, fixed to wall with and including clamps, fittings & fixtures, complete.
S & F 110mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors including fittings and fixtures, complete.
S & F 100mm bore PVC (SWR) bends any readius
S & F PVC (SWR) vent cowl 110mm dia
S & F PVC (SWR) vent cowl 75mm dia
Dismantling boarding, any description, fixed in any position with nails
S & F of 18 mm thick Rajshri Wood Plastic Composite sheet of Plain colour of Density 650 kg/cbm fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specification and as directed by the Engr-in- Charge.
S & F of 18 mm thick Rajshri Wood Plastic Composite sheet of one side Prelam/ Rigidlam and other side balancing laminate colour of of Density 650 kg/cbm to make kitchen cabinet shutter/ drawers Front shutters complete as specified and as directed by Engr-in-Charge
S & F of 12 mm thick Rajshri Wood Plastic Composite sheet of Plain colour of Density 650 kg/cbm fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinate back and pull out drawers sides completes as per specification and as directed by the Engr-in- Charge.
S & F of 6 mm thick Rajshri Wood Plastic Compositesheet of Plain colour of Density 650 kg/cbm fixed with screws, solvent cement/ adhesive to make kichen cabnite back covering and pull out dwer base completes as per specification and as directed by the Engr-in- Charge.
S & F for 20mm thick wide and 1 mm thick PVC EDGE BENDING of PVC pasted of edge with sutable adhesive complete all as specified and directed.
S & F of auto closing hinge openable at 0 degree for kitchen for kitchen cabnet shutter complete all as specified and directed.
S & F stain less steel 5 Ball bearing runners 45 mm Telescopic Channel (20 inch) full extension load capacity 50 kgs, complete all as specified and directed.
S & F of stain less steel handles 200 mm size for kitchen cabinet shutter, complete all as specified and directed.
S & F for chrome plated stainless steel wire basket (cup and saucer basket) pul out type size 530x500mm with necessary fixing clip etc complete in all respect as specified and directed by Engr-in Charge. Make : Godrej or Equivalent
S & F for chrome plated stainless steel wire basket (Jar basket) pul out type size 536x500mm with necessary fixing clip etc complete in all respect as specified and directed by Engr-in Charge. Make : Godrej or Equivalent
S & F for chrome plated stainless steel wire basket (Thali basket) pul out type size 380x500mm with necessary fixing clip etc complete in all respect as specified and directed by Engr-in Charge. Make : Godrej or Equivalent
S & F for chrome plated stainless steel wire basket (cutlery basket) pul out type size 380x500mm with necessary fixing clip etc complete in all respect as specified and directed by Engr-in Charge. Make : Godrej or Equivalent
S & F for chrome plated stainless steel wire basket (storage/ Plain basket) ) pul out type size 380x500mm with necessary fixing clip etc complete in all respect as specified and directed by Engr-in Charge. Make : Godrej or Equivalent
S & F for chrome plated stainless steel wire basket (Botal pull out ) pul out type size 150x200mm with necessary fixing clip etc complete in all respect as specified and directed by Engr-in Charge. Make : Godrej or Equivalent
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
Cutting openings, through brick walls / stone walls / PCC block walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m
Demolition of Brickwork or stone boulder / PCC block masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles
Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame)
Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
Taking down and refixing of shutters of any description, exc 2 sqm each, all as directed.
Supply fabricate & fix in position aluminium powder coated (minimum thickness of powder coating 50 micron approve cotour) three track window (two shutters g:azed & one shutter wire gauge) with frame, glazed with 4mm thick tinted glass and. wire gauge with stainless ;steel wire cloth 0.36mm nominal dia of wire and everage width of aperture 1.40mm including rubber bead, joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below and as directed by Engr-in-Charge
(a) Frame (top & side) section shall of size (section No 20831). (b) Frame (bottom) section shall of size 92.00x31.75x1.50mm (section No 20832). (c) Top & side Member of shutter section shall be size 18.00x40.00x1.55mm (section No. 20738) (d) Shutter interlock section shall be of size 18.00x40.00x1.45mm (section No. 20737) (e) Bottom Member of shutter section shall be of size 18.00x40.00x1.55mm(section No. 20736). Note :- Section No give above are of make Jindal.
S&F joint free, coloured Non Skid ceramic tiles 7 to 8mm thick (squares/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM(1:6)
S&F Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, dark shade, double charged / ultracharged, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM(1:6)
M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite
Providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete.
M&L for Providing precast cement concrete type B1 (1:2:4), using 20mm graded stone aggregates, as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match with plain faces
S&F Mild steel CRS bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4.
M&L complete removal of existing treatment on old ceiling surfaces and applying two coats of oil bound distemper over one coat of primer, on plastered surfaces, prepara-tory to distempering complete all as specified and as directed by Engineer-in-Charge.
Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store
M&L for PVC (SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement
S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm
S&F stainless steel plate rack of size 39" x 36" x 10", fabricated from 0.63mm sheet, fixed on walls, complete all as directed.
M&L for 40mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed
S&F 15mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors
S&F 32mm dia waste pipes, Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches
S&F 15mm dia chromium plated, fancy type, Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed
S & F 75mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints, fixed to wall with and including clamps, fittings & fixtures, complete.
S & F 75mm bore PVC (SWR) bends any readius
S & F 32mm bore of Tubes, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors
S & F 40mm bore of Tubes, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors or trenches.
S&F PVC insulated, 2 core, 1.5 sqmm, round sheathed copper conductors (flexible) industrial cable, fire retardent, all as specified and as directed.
Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm
M&L for providing dry river sand as in sand cushioning to under ground PVC cable including punning down of sand in layer all as specified and directed by Engg-in-Charge. (Note: for measurement & payment, punned thickness of sand will be considered.)
S & F Bell push, flush type, 5 amp
S&F Buzzer, Ding Dong AC. 230 volts, single pole
Supply and fixing in replacement of LED flood light 200 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. Make:- Wipro Cat part no.LF30-272-060-57-XX or equivalent of makes specified here in after
S & F 20mm dia PVC conduit, fixed to walls or on floors, including all fittings and fixtures complete.
S & F flood light swiveling bracket (180 degree rotation) made out of 32mm dia glavanised steel tube, medium grade, 0.6m long, welded with and including operating handle for swivelling / rotating and fixed with & including galvanised mild steel flat iron 32 x 3 mm clamps, suitable bolts & nuts, fixed to walls / ceiling all as per site requirement and as directed. ( Note - S&F necessary bearing & bush for rotation is deemed to be included in the quoted rates).
M&L point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light / fan / bell point in and including PVC rigid non metalic concealed conduit 19/20mm dia, medium duty, ISI marked, terminated in and including modular metal box, modular fittings, etc., including 1.5 sqmm PVC isulated and unsheathed FRLS swingle core multistranded copper earth continuity conductor controlled by one switch, complete, including cutting chases in existing wall for concealed wiring and finishing surfaces with cement sand mortar 1:3 and finishing as per existing surface.
All as per Sl item No 100 herein before but for one socket out let 5 Pins 5 Amp on indipendent board, complete.
All as per Sl item No 100 herein before but for one socket out let 5 Pins 5 Amp on same board with other switches, complete.
All as per Item No. 100 herein before but 2.5sqmm PVC insulated and unsheathed FRLS single core multistandard copper conductor including 2.5 Sqmm PVC insulated and unsheathed FRLS copper earth wire for switch socket combination 3 Pin 15 Amps on independent board.
M&L point wiring with 2.5 sqmm PVC insulated and unsheathed FRLS single core multistranded copper conductor for switch socket combination 15 Amp point on independent board in and including PVC rigid non metalic concealed conduit, medium duty, ISI marked, terminated in and including modular metal box, modular fittings, etc., including 2.5 sqmm PVC isulated and unsheathed FRLS single core multistranded copper earth continuity conductor controlled by one switch, complete, including cutting chases in existing wall for concealed wiring and finishing surfaces with cement sand mortar 1:3 and finishing as per existing surface.
M&L point wiring for one light or one fan point controlled by one switch with cables (Wiring with Copper conductor PVC sheathed FRLS cable) 1.5 Sqmm size in and including PVC casing & Caping and 3mm thick plastic laminated sheet cover for fixing switch / sockets/regulators etc complete.
Fire Alarm sounders / Sirens Electronic type horizontal single stage continous normal operation for atleast 50 Minutes with sound leel 65DB to 120 DB measured at 1.5Mtr with sound output viration of + 5 DB 1000 Mtr range.
S & F modular Socket, 6A - 2/3 pin combined 2 module,
S & F modular Socket 6A/16A - 2/3 pin combined 2 module,
S & F Modular switch 1 way 6A,1 module
S &F Modular switch 1 way 16A, 1 module
S&F switch piano, flush type single pole, one way 5 Amp including connection please.
S & F Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings
S & F Modular Fan step regulator, 120W - 2 module
S & F MCB TPN 415 volts, 63 Amps, 10 KA, type B curve.
S & F MCB SPN 240 volts, 32 Amps, 10 KA, type B curve.
S & F MCB SP 240 volts, 6 to 32 Amps, 10 KA, type B curve.
Supply & fixing Sheet metal enclosure MCB DB SPN 12 way, 240 volts with 200 Amps rated bus bar with double door with isolated neutral bar and shrouded bus bar, IP 43, having door earthing, fixed on flush to the wall Including making the hole in the wall and fixing the DB including cement work and plastering complete all as directed.
Supply & fixing Sheet metal enclosure MCB DB TPN 4 way, 415 volts with 200 Amps rated bus bar with double door with isolated neutral bar and shrouded bus bar, IP 43, having door earthing, fixed on flush to the wall Including making the hole in the wall and fixing the DB including cement work and plastering complete all as directed.
Supply & fixing sheet metal enclosures for fixing MCBs Single pole and neutral 8way, 240 volts with 200 Amps rated bus bar with double door fixed on flush to the wall including making the hole in the wall and fixing the DB including cement work and plastering complete all as directed.
M&L in sub main wiring with 2 single core PVC insulated unsheathed cable, 1100v grade with FRLS PVC 4sq mm copper cable multi stranded conductor drawn through and including ISI marked PVC conduit 25 mm dia, complete, fixed on walls/ceilings with PVC saddles as per IS including of 4 sqmm dia FRILS PVC Copper cable green colour as earth wire connected to earth all as specified and directed by En ineer-in-Charge.
M&L in sub main wiring with 2 single core PVC insulated unsheathed cable, 1100v grade with FRLS PVC 6sq mm copper cable multi stranded conductor drawn through and including ISI marked PVC conduit 25 mm dia, complete, fixed on walls/ceilings with PVC saddles as per IS including of 6 sqmm dia FRILS PVC Copper cable green colour as earth wire connected to earth all as specified and directed by En ineer-in-Charge.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)
S & F junction box of size 200mm x 150mm x 100mm made of FRP with double stud hinged door locking, including MCB 06 Amp - 02 Nos with dinrail for mounting MCB including suitable connector for looping and duly sealed with rubber plugs, fixed on pole with necessary clamps, nuts, bolts, etc., all as directed.
S&F Supply and fixing LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S&F Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m
Supply and fix exhaust fan, steel body AC single Phase,230V of size 450mm sweep with, blades, and frame and louvers all as specified and directed.
S&F LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessesed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders, & LED lamp suitable for roof ceiling including connecting up wih driver three core flexible copper conductor cases of suitable size, complete.
S&F wall mounted fan plastic body, AC, single phase, 230/240 volts of size 300mm sweep with louvers all as directed.
Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion
S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one MCB 20amp 240V all as specified and directed.
M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm, 4 core.
Supply & installation of Air Cooled Inverter based split AC unit with cooling functions and suitable to operate at ambient conditions of (-10 to 46 Deg C in cooling Mode). Air conditioner will have following conditions:(i) Refrigerent - R 41 Oa (ii) EER - min 3.0 w/w (5 star rating) (iii) Tonnage - 1.5 (iv)Indoor Noise Level - Not more than 48 Db (v) Filter - (a) Must have PM 2.5 u Filter (b) Electrostatic dust filter (c) Oxidizer dust filter (vi) Functions of remote : (a) Air directional control (b) Auto Timer (c) Economic sleep mode (d) Auto fan speed (e) Auto swing (f) Temp display (g) Turbo mode All specification will be as per IS-1391 (Part 2) 1992 Room Air Conditioners Make: Daikin/ Hitachi/ O General/voltas
Note:- Following will be inclusive in rate:- (a) Piping length upto 15 mtr will be inclusive in item (b) Installation will include fixing the outdoor unit on the platform as per direction of Engineer in Charge (c) Installation will also include civil work for making hole on the wall and putting the iron sleeve for passing the refrigerant pipe (d) Testing and commissioning of the Air conditioner to the entire satisfaction of Engineer in Charge (e) Contractor will provide warranty of 5 years for compressor from the date of installation (f) 5% of Air conditioner will be tested by the Garrison Engineer for Energy Efficiency and all the functions provision in the Air conditioner (g) Contractor provide complete free service in warrenty period by the company
Supply and installation of voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170V to 250V without voltage stablized at 230V with accuracy of (+,-) 2.5 % and capacity 5 KVA complete all as specified and directed.
High Tech Consruction
Honest builders
S t modi
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .