M/o Road (P/L DBM and BC Work on Internal Road in A and C Block Sector-33) Noida

Applying a tack coat of rubberised hot bitumen of 80/100 pernetration @1.00 kg/sqm on road surface including mixing of 10 % rubber by weight of bitumen sieved through 6mm sieve cleaning the road surface,fuel for heating the bitumen,all labour,T&P etc complete required for proper completion of work as per diredtion of engineer incharge

Providing and laying Dense Bituminous macadam with higher capacity Batch Type type MHP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification, clause No. 505 complete in all respects.

Providing and laying Bituminous concretewithe higher capacity Batch Type Hot Mix Plant using crushed stone aggregates of specified grading, premixed with bituminous binder @ 5.4per cent of mix and filler, transporting the hot mix to work site, laying with hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, clause No. 507 complete in all respects

Providing and laying seal coat sealing the voids in bituminous surfece laid to the specified levels, grade and cross fall using Type A seal coats .

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including retroreflective glass bead @ 250 gms per sqm area thickness of 2.5 mm is exclusive of surfece applied glass bead as per IRC 35. The finished surfece to be level. Enform and free from streaks and holes . Rates are inclusive of all taxes royalty etc. all T&P Machine material and labour required for proper completion of work .

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 2.75 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of ngineer-incharge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately).