CA NO GE(N)AMB-65/2023-24 REPAIR/MAINT POLISHING ALL TYPE OF WOODEN AND STEEL FURNITURE OF BSO (NORTH) UNDER GE (NORTH) AMBALA CANTT

Amount

Sofa set one/three seater (FD-85,258 & 281) Taking out unserviceable foam cushion seat & back from sofa set and supply & fix new foam cushion seat & back of size 530x560x100mm thick, 32 density duly covered with tapestry cloth of colour, quality and shade as approved by GE/Engr-in-Charge (rate not less than Rs. 300/- per mtr) matching with existing shape and size all as shown in drg complete all as specified and as directed by the Engr-in-Charge. Note: Cushion and cloth will be supplied/dumped in advance before commencement of work alongwith purchase voucher.

Taking out unserviceable head board from bed with plywood top (FD-246,247) and S&F new head board made of first class hard seasoned wood and plywood commercial 3.5mm thick one side teak face exterior grade BWR as per IS code 303 duly covered with 4 mm thick teak wood beading all around, matching with the existing shape & size, all as shown in drg complete all as specified and as directed by the Engr-in-Charge.

Description same all as per item No 02 above but foot board of bed of shape and size as shown in drg complete all as specified and as directed by the Engr-in-Charge.

Taking out unserviceable plywood & stiffener from bed with ply top (FD-246, 247) and S&F new stiffner made of first class hard seasoned wood along with new plywood commercial 12mm thick exterior grade BWR, ISI marked as per IS code 303, matching with the existing shape & size, all as shown in drg complete all as specified and as directed by the Engr-in-Charge. Note:plywood will be dumped in advance before commencement of work along with purchase voucher. Note : Payment will be processed after fulfilling following condition:- (i) Verification of purchase voucher of plywood. (ii) Certification of plywood supplied on ground that plywood supplied is complying CA all as per specifications by manufacturers. (iii) Submission of test certificate of plywood from manufacturers. (iv) Make of ply shall be Dura Ply, Archid Ply, Bhutan Board, Archid Board, Century, Durian, Mysore Chip Board Ltd.

Taking out unserviceable newar from Charpoy GI pipe (FD-220) , S&F new plywood 12mm thick of size 1990x910mm exterior grade BWR ISI Marked , IS code 303. Before fixing of plywood, all steel surfaces should be cleaned, loose part of charpoy to be framed and frame to be tightened including MS plate 3 mm thick in round shape shall be welded at the bottom of all legs. Making 03 Nos hole of equal size on both long rail and 02 Nos holes of equal size on both short rail by drill machine, S&F of 03 (Three) Nos MS flat stiffners of size 40 x 5 mm thick and 900 mm long duly hole both the end of stiffner by drill machine, hole should be matched with hole of long rail at equal distance on both the long rails and painting of all MS stiffner with two coat of synthetic enamelled black paint over a coat of red oxide. After that plywood in all four corners of the ply duly rounded in shape and smoothened by using sand paper etc. Plywood should be fixed with cap type nut & bolts as per sample held with BSO (North) Furniture Yard complete all as specified and directed by the Engr-in-Charge. Note:plywood will be dumped in advance before commencement of work along with purchase voucher. Note : Payment will be processed after fulfilling following condition:- (i) Verification of purchase voucher of plywood. (ii) Certification of plywood supplied on ground that plywood supplied is complying CA all as per specifications by manufacturers. (iii) Submission of test certificate of plywood from manufacturers. (iv) Make of ply shall be Dura Ply, Archid Ply, Bhutan Board, Archid Board, Century, Durian, Mysore Chip Board Ltd.

Table 3'x2' with or with out drawer steel (FD-223,310,283,1007, 1008) Taking out unserviceable table top from table 3'x2' and S&F new table top made of pre-laminated particle board 18 mm thick exterior grade both side teak face, ISI marked as per IS Code No-12823 duly covered with 4mm thick teak wood beading all around the top,matching with the existing shape and size, all as shown in drg complete all as specified and as directed by the Engr-in-Charge.

Preparation of old polished surfaces with sand paper, making smooth surface by , filling the cracks/cavities and again making the surface smooth with sand paper and applying french polishing with one or more coats to bed with plywood top (FD-246,247) complete all as specified and as directed by the Engr-in-Charge

Preparation of old polished surfaces with sand paper, making smooth surface by , filling the cracks/cavities and again making the surface smooth with sand paper and applying french polishing with one or more coats to table 3'x2' with or without drawer steel (FD-223,283,224 & 283) complete all as specified and as directed by the Engr-in-Charge.

Note:- Amount of credit of Rs. 35,400.00 for retrieved materials is mentioned in Schedule of Credit Page No. 24 of tender documents in pdf form which will be deducted offline while acceptance of tender.

M/s R.K.Jain

P.G.INFRASTRUCTURE