SITC of L.T. Cables, Feeder Pillars, Street/Parking Lights at various locations in lab campus and Providing Fixing of Manual Change over Switch and AMF Controller for Gen Set, Phase Sequencer to Air Conditioning systems of Green Houses

Amount

Wiring for circuit/ submain wiring alongwith earthwire with the following size of FRLS PVC insulated copper conductor single core cable in surface/ recessed ISI medium class PVC conduit as required. i) 2x2.5 sqmm + 1x2.5 sqmm earth wire

Wiring for circuit/ submain wiring alongwith earthwire with the following size of FRLS PVC insulated copper conductor single core cable in surface/ recessed ISI medium class PVC conduit as required. i) 4x16 sqmm + 2x6 sqmm earth wire

Supplying & fixing suitable size GI/ PVC box with modular plate in front on surface or in recess, including providing & fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. (Modular Accessories Make: Anchor Roma/ Havells Crabtree/ Wipro North West )

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreadders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. (Make: INDO ASIAN/ HAVELLS/ STANDARD/ Schneider). i) 100A, 16KA, TPMCB

Supplying and fixing following way, surface/ recess mounting, vertical type,415 V, TPN MCB Distribution Board, sheet steel, dust protected, powder painted, inclusive of 200 A, tinned copper bus bar, neutral bus bar, earth bar, din bar for mounting MCBs (But without MCBs and incomer) as required. (Make: INDO ASIAN/ HAVELLS/ STANDARD/ SCHNEIDER). i) 8 way (4 + 24), Double Door

Supplying and fixing 5 amps to 32 amp. rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make: INDO ASIAN/ HAVELLS/ STANDARD/ SCHNEIDER). i) Single pole

Supplying and fixing 5 amps to 32 amp. rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make: INDO ASIAN/ HAVELLS/ STANDARD/ Schneider ). i) Triple pole

Earthing with G.I earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25mmx5mm G.I strip in 40mm dia. G.I pipe from earth electrode including connection with G.I nut, bolt, spring, washer excavation and re-filling etc. as required.

Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on wall surface as required. i)Upto 35 sq.mm (Clamped with 1mm thick saddle)

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size in the existing RCC HUME/METAL/HDPE pipe as required. i) Upto 35 SQMM

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size in the existing RCC HUME/METAL/HDPE pipe as required. i) Above 95 sq.mm and Upto 185 SQMM

Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on wall surface as required. i) Above 95 sq.mm and Upto 185 SQMM (clamped with 25/40x3mm MS flat clamp)

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size in the existing masonary open duct as required. i) Upto 120 sq.mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductror cable of 1.1 KV Grade as required. i) 3.5x35 sq. mm (32mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductror cable of 1.1 KV Grade as required. i) 3.5 x 185 sq. mm (57mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductror cable of 1.1 KV Grade as required. i) 4x16 sq. mm (28mm)

Supplying & laying of following size DWC HDPE pipe ISI marked along with aa aacessories like socket, bend, couplers etc. confirming to IS 14930, Patr II complete with fitting and cutting, jointing etc. direct in ground (75cm below ground lavel) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required. a) 90 mm dia ( OD 90 mm & ID 76 mm nominal)

Supplying & laying of following size DWC HDPE pipe ISI marked along with aa aacessories like socket, bend, couplers etc. confirming to IS 14930, Patr II complete with fitting and cutting, jointing etc. direct in ground(75cm below ground lavel) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required. a) 160 mm dia ( OD 160 mm & ID 135 mm nominal)

Supplying, installation, testing and commissioning of Microwave technology based occupancy sensor having high performance, non regulating programmable type, suitable for connected load upto 10 Amp, for mountinf height up to 2.6 mtr and for 5m x 20m coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required. (Make: BAJAJ/ LEGRAND/ WIPRO/ PHILIPS)

Supplying & testing of Aluminium conductor, armoured, PVC insulated & PVC sheathed/ XLPE power cable of 1.1 KV grade of following sizes as required (Make: Polycab/ Havells/ KEI/ FINOLEX ) i) 3.5 core 35 sqmm

Supplying & testing of Aluminium conductor, armoured, PVC insulated & PVC sheathed/ XLPE power cable of 1.1 KV grade of following sizes as required (Make: Polycab/ Havells/ KEI/ FINOLEX ) i) 4 core 16 sqmm

Supplying & testing of Aluminium conductor, armoured, PVC insulated & PVC sheathed/ XLPE power cable of 1.1 KV grade of following sizes as required (Make: Polycab/ Havells/ KEI/ FINOLEX ) i) 3.5 core 185 sqmm

Supplying and fixing street light timeline distribution board 32A,3 pole/230v complete with astronomical time switch as require.(Make; Indo Asian/ Havell/ C&S)

SITC of factory made LT Feeder Pillar box ( Feeder Pillar Construction with IP 65 Protection) of cubicle type Construction, fabricated out of 3 mm thick CRCA sheet( powder coated) duly mounted on angle iron legs of suitable size frame including lifting arrangement and legs duly spray painted internally & externally, minimum size of legs 1200 mm. Panel shall be suitable to accommodate incoming and outgoing accessories as follows: i) Four Pole ,250 Amp, 25 ka breaking capacity fixed thermal magnetic MCCB = 01 No. ii) 250 Amp. Aluminium bus bar with PVC Sleeves supported on insulator = 01 Set( Set OF 04 BUS BAR) . Approx. size 600 mm(W) x 600 mm (H) x 450 mm (D) (MCCB Make : INDO ASIAN/ HAVELLS/ STANDARD/ Schneider).

SITC of factory made LT Feeder Pillar box ( Feeder Pillar Construction with IP 65 Protection)of cubicle type Construction, fabricated out of 3 mm thick CRCA sheet( powder coated) duly mounted on angle iron legs of suitable size frame including lifting arrangement and legs duly spray painted internally & externally, minimum size of legs 1200 mm. Panel shall be suitable to accommodate incoming and outgoing accessories as follows: i) Four Pole ,100 Amp, 16 ka breaking capacity fixed thermal magnetic MCCB = 01 No. ii) 200 Amp. Aluminium bus bar with PVC Sleeves supported on insulator = 01 Set( Set OF 04 BUS BAR) . Approx. size 550 mm(W) x 550 mm (H) x 450 mm (D) (MCCB Make : INDO ASIAN/ HAVELLS/ STANDARD/ Schneider) .

SITC of LT Panel indoor type, fabricated out of 2 mm thick CRCA sheet( powder coated) duly fixed with existing Panel. Panel shall be suitable to accommodate incoming and outgoing accessories including 3 Phase and neutral aluminium bus bar extended links of suitable size. Approx size will be 350 mm (W) x 1825 mm (H) x 400 mm (D). Incomer : i) 4 Pole, 415 volt, 250 amp. Manual Changeover = 01 No. ii) LED Indicator Lamp = 02 No. iii) Multifunction Metre (VAF + PF + KWH + Run Hours with CT) = 01 No. (Changeover switch Make : INDO ASIAN/ HAVELLS/ STANDARD/ SCHNEIDER. MFM Make: L&T/ Schneider/ Enersol).

SITC of LT Panel outoor type ( Feeder Pillar Construction with IP 65 Protection), fabricated out of 3 mm thick CRCA sheet( powder coated) duly mounted on angle iron of suitable size frame including lifting arrangement and legs duly spray painted internally & externally, minimum size of legs 1500 mm. Panel shall be suitable to accommodate incoming and outgoing accessories ( suitable for termination of 3.5 core 400 sq mm cable) including 3 Phase & neutral Aluminium bus bar of suitable size. Approx. size 600 mm(W) x 600 mm (H) x 550 mm (D) Incomer : i) 4 Pole, 415 volt, 630 amp. Manual Changeover = 01 No. (Changeover switch Make : INDO ASIAN/ HAVELLS/ STANDARD/ SCHNEIDER)

SITC of LT Panel indoor type, fabricated out of 2 mm thick CRCA sheet( powder coated) duly fixed on wall. Panel shall be suitable to accommodate incoming and outgoing aluminium bus bar of suitable size . Approx size will be 400 mm (W) x 750 mm (H) x 250 mm (D). Incomer : i) 4 Pole, 415 volt, 125 amp., 16 ka adjustable Thermal MCCB = 01 No. ii) LED Indicator Lamp = 02 No. iii) 110 A 3Phase CONTACTOR = 01 No. iv) Phase Sequence Relay = 01 No. v) 'C' Curve MCB 32 Amp., 3 Pole = 4 No. vi) Phase correction Relay = 01 no. vii) Delay Timer = 01 No. (MCCB Make : INDO ASIAN/ HAVELLS/ STANDARD/ SCHNEIDER, Contactor Make: L&T/ SChneider/ ABB, Phase Sequencer & Phase Corrector Relay Make: Minilec/ L&T).

Supplying & Fixing of Steel Tubular Pole (Swaged Type) overall length 5.8 Mtr. long , bottom length of 3.0 mtr, top length of 2.8 mtr, bottom dia 90 mm approx, top dia 75 mm approx, approximate weight of pole 40 to 45 Kg. with 10 mm (1'x1') thick MS plate welded at bottom including wiring the pole with 3x1.5 sqmm FRLS Copper wire., Painting one coat of red oxide and two coat of Aluminium paint as required. Item includes S/F suitable GI Bracket on top for mounting LED Street light on pole, LED 45W (IP 66 protection) Streetlight luminaire, Poly Carbonate, Weatherproof, Waterproof ( IP 55 Protection) street light terminal box with Bus Bar, one no. 6 amp. Single Pole MCB and neutral link including front lockable cover. ( LED Luminaire Make : Crompton/ Bajaj/ Wipro/ halonix, Street Light Terminal Box Make : Sintex or Eq.)

Supply and fixing of the air curtains with Free Magnetic Sensor for Door, Model: 4ft,size 1200*230*212 mm, installation height 2.5-3.0 Mtr, Power high up to 510,& low up to 480 watt, air speed high up to 20 m/s & low upto 16m/s, air flow high up to 3000 m3/h & low up to 2400 m3/h with noise level below 60 db (Make : AVRO/ EURONICS/ EUREKA) as required.

Supplying, fixing,Testing & commissioning of AMF Panel controller (Make: ComAp, Model Intelilite NT AMF 25) complete as required.

Supplying and fixing of LED Batten light 18/20 Watt (Make: Panasonic / bajaj/ Wipro/ Crompton).

RD ENGINEERS