AMRUT- WSS to Guruvayur Municipality in Thrissur District- Raw water pumping main from intake well at Illikkal to WTP at Kottapadi- Balance work including railway crossing at Paluvai by HDD method- General civil work.

Amount

PART I-Cost Of Materials

100.98.120:Supply of DI K9 Pipe Conforming to IS 8329/2000, 350mm Dia.

OD228211/2023-2024:DI specials(5% of total DI pipe amount)

PART II-Working Charges

OD228212/2023-2024:Creation of 600 mm dia reamer hole and pulling 500 mm dia MS pipe using HDD method including all labour charges, hire charges. etc. excluding cost of HDPE pipes after obtaining the permission of Railway/Local authorities and as per the direction of KWA official in charge.

OD228213/2023-2024:Bentonite arrangement for execution of HDD works at site after obtaining the permission of Railway/Local authorities and as per the direction of KWA official in charge.

OD228214/2023-2024:Disposal and removing of used (spent) bentonite slurry out flowing through the drilled hole<br>after piloting, reaming, pulling and punching out with in 5 KM by lorry.

OD228215/2023-2024:Sealing of holes in manholes after HDD laying etc. with suitable adhessive material and<br>making water tight at pipe entryand exit points in manhole including pressure grouting, etc. complete after obtaining the permission of Railway/Local authorities and as per the direction of KWA official in charge.

OD228216/2023-2024:Mobilization charges, Breakdown charges & utility shifting

100.8.2:Fencing 1.50m high with two rows of casuarina poles (girth 15cm to 24cm) tied with coir yarn on vertical casuarina pole (girth 15cm to 24cm) fixed at 1.5m intervals.

100.98.1008:Engaging Coolie.

19.16:Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12 mm dia steeel bar conforming to IS:1786, having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 ( 1cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) Complete as per design

100.37.20.1:In situ fabrication of M.S. pipes of size 500mm (I.D.) using 10mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

OD228217/2023-2024:Laying 500mm MS Pipe of suitable thickness across the railway line with clearance as specified by the railway authorities by push through technique including all hire charges of machinery,after obtaining the permission of Railway/Local authorities and as per the direction of KWA official in charge. labour,fuel,erection of machinery, transportation ,dismantling after completion of work,erecting well point de watering system for the entire working period ,carrying out earth work excavation as required for adopting HDD pipe laying including necessary shoring and jointing the pushed pipes by suitable welding as per IS etc complete and reforming ground after completion of work

18.30.7:Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:300 mm diameter pipe

13.50.3:Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works

13.59:Coal tarring two coats on new work using 0.16 litre and 0.12 litre coal tar per sqm in the first coat and second coat respectively.

OD228218/2023-2024:For Caution Board for executing HDD work after obtaining the permission of Railway/Local authorities and as per the direction of KWA official in charge.

100.37.20.2:Fabricating M.S. flanges of diameter 500mm using 16mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 10mm thick M.S. plates.

100.37.20.3:Cutting 500mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 10mm thick M.S. plates.

100.37.20.4:Welding 500mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 10mm thick M.S. plates.

100.37.20.5:Grinding cut and weld edges of 500mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 10mm thick M.S. plates.

100.15.6:Conveying and laying Double Flanged (Screwed / Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K-9 conforming to IS: 8329, excluding cost of pipe and specials: 350mm diameter Ductile Iron Double Flanged pipes.

18.70.6:Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:350 mm dia pipes

SAMEER ALI CT

Bidder Name

SAMEER ALI CT

Shabeeb