Tender for ARC of Erection of HT/LT line,T/C work & Maintenance & U/G Work under GWFCM and or other scheme for All SDN UNDER Ankleshwar (O&M) Division.

Item Code Item Unit FY 2024-25

HT TAPPING FROM THE EXISTING POLE

INCLUDING FIXING OF CROSS ARMS, CLAMPS

ANTI-CLIMBING DEVICES, DANGER BOARD,

INSULATORS ETC. COMPLETE AND PAINTING

1 9926000001 OF FABRICATED MATERIALS AND No.

NUMBERING COMPLETE WITH COST OF

PAINTS AS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OF GUY SET AND

ERECTION OF PSC POLES OF 8 *200 KG

INCLUDING EXCAVATION OF PIT AND

REFILLING OF EARTH, FIXING OFCROSS ARMS,

TOP FITTING CLAMPS ANTI-CLIMBING

DEVICES, INSULATORS ETC. COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED

ON THE POLES AND NUMBERING WITH COST

OF PAINT AS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OF GUY SET AND

ERECTION OF STEEL POLES OF 9 TO

METERS INCLUDING EXCAVATION OF PIT

AND REFILLING OF EARTH, FIXING OFCROSS

ARMS, TOP FITTING CLAMPS ANTI-CLIMBING

DEVICES, DANGER BOARD, INSULATORS ETC.

3 9926000003 COMPLETE AND PAINTING OF STEEL POLE, No.

FABRICATED MATERIALS USED ON THE

POLEAND NUMBERING WITH COST OF PAINT

AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND

ERECTION OF STEEL POLE OF 13 METERS FOR

RAILWAY CROSSING ON BG/MG/NG LINE FOR

0.400/11/22KV OVERHEAD LINES I.E

INCLUDING EXCAVATION OF PIT & REFILLING

OF EARTH, FIXING CROSS ARMS, TOP FITTING

CLAMPS,ANTI-CLIMBING DEVICES DANGER

BOARD, INSULATORS ETC. COMPLETE AND

PAINTING OF STEEL POLES, FABRICATED

MATERIALS USED ON THE POLES AND

NUMBERING WITH COSTOF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF

METERS 200 KG PSC POLES INCLUDING

EXCAVATION OF PITS & REFILLING OF

EARTHING, FIXING OF CHANNELS,

SUPPORTING ANGLES,CLAMPS, ANTI-

CLIMBING DEVICES DANGER

BOARDS,INSULATORS ETC.COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED

ON THE POLES AND NUMBERING WITH COST

OF PAINT AS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OF GUY SETS AND

EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE OF

TO 11 METERS.STEEL POLE INCLUDING

EXCAVATION OF PITS & REFILLING OFEARTH,

FIXING OF CHANNELS, SUPPORTING ANGLES,

CLAMPS,ANTI-CLIMBING DEVICES DANGER

BOARDS, INSULATORS ETC.COMPLETE &

PAINTING OF POLES,FABRICATED

MATERIALSUSED ON THE POLES AND

NUMBERING WITH COST OF PAINTSAS PER

STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND

EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE

WITH MOUNTING OF AB SWITCH, HG FUSES

OF 8 MTRS 200 KG PSC POLES INCLUDING

EXCAVATION OF PITS AND REFILLING OF

EARTH,FIXING OF CHANNELS SUPPORTING

ANGLES, CLAMPS, ANTI-CLIMBING DEVICES,

7 9926000007 DANGER BOARDS, INSULATORS,DOFUSES No.

ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLES

AND NUMBERING WITH COSTOF PAINT AS

PER STANDARD SPECIFICATION BUT

EXCLUDINGOF ERECTION OF GUY SET AND

EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE

WITH MOUNTING OF AB SWITCH,HG FUSES,

TO 11 METERS STEEL POLES INCLUDING

EXCAVATION OF PITS AND REFILLING OF

EARTH, FIXING OFCHANNEL, SUPPORTING

ANGLES, CLAMPS, ANTI-CLIMBING DEVICES

8 9926000008 DANGER BOARDS, INSULATORS, ETC. No.

COMPLETE AND PAINTING OF POLES

FABRICATED MATERIALS USED ON THE POLES

AND NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND

EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURES

WITH MOUNTING OFAB SWITCH, HG FUSES,

TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX. OF 8 METER,200KG

PSC POLE METERS POLES INCLUDING

EXCAVATION OF PITS AND REFILLING OF

EARTH, CARTING OF TRANSFORMERS

FROMSTORES TO SITE, FIXING OF CHANNELS,

9 9926000009 SUPPORTING ANGLES,BRACINGS CROSS No.

ARMS CLAMPS, ANTICLIMBING DEVICES

DANGER BOARDS, CONDUCTOR AND CABLE

WIRING ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USEDON THE POLES

AND NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND

ERECTION OF DOUBLE POLE STRUCTURE

WITH MOUNTING OF AB SWITCH,HG FUSES

TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX 9 TO 11 METERS STEEL

POLES INCLUDING EXCAVATION OF PITS &

REFILLING OF EARTH CARTING OF

TRANSFORMERS FROM STORE TO SITE,

FIXINGOF CHANNELS SUPPORTING ANGLES,

BRACING, CROSS ARMS,CLAMPS,

ANTICLIMBING DEVICES, DANGER

BOARDS,CONDUCTOR AND CABLE WIRING

ETC. COMPLETE AND PAINTING OF POLES

FABRICATED MATERIALS USED ON THE POLES

AND NUMBERING AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTIONS

OF GUY SETS AND EARTHING.

ERECTION OF GUY SET INCLUDING

EXCAVATION OF PITS & REFILLING OF EARTH

AS PER STANDARD SPECIFICATION WITH STAY

11 9926000011 CLAMPS, STAY WIRE, ANCHOR ROD, TURN No.

BUCKLE, EYEBOLT, GUY INSULATOR, CEMENT

CONCRETE BLOCK ETC. BUT EXCLUDING

CONCRETING OF POLES, GUYS, ETC.

INCLUDING COST OF CEMENT SAND METAL

12 9926000012 (1:2:4) AND WATER ETC. AS PER STANDARD CMT

SPECIFICATION.(cement Should be 53 grade)

used for Concreting.

ERECTION OF COIL TYPE EARTHING

INCLUDING COST OF COAL,SALT ETC. BUT

13 9926000013 WITHOUT COST OF GI WIRE AS PER No.

STANDARD SPECIFICATION(20kg solt+20kg

ERECTION OF GI PIPE/CI PLATE TYPE

EARTHING INCLUDINGCOST OF COAL SALT

14 9926000014 ETC. BUT WITHOUT COST OF PIPE/GIPLATE GI No.

WIRE AS PER STANDARD

SPECIFICATION.(20kg solt+20kg coal)

ERECTION OF STREET LIGHT FIXTURE

COMPLETE WITH CLAMPS, BRASS NIPPLE,

BRASS HOLDER TECK WOOD

BUSH,REFLECTORS FUSE, WIRING ETC. AS PER

STANDARD SPECIFICATION BUT EXCLUDING

COST OF MATERIALS.

OF(30mm2)ACSR/34MM@,55MM2 AAA

CONDUCTOR for ALL TYPE OF CONDUCTOR

16 9926000016 ONE COND PER KM

(EXCEPT DOG CONDUCTOR) FOR 11/22KV &

LT LINES INCLUDING FIXING OF INSULATORS,

BINDING JUMPERING ETC.

STRINGING OF GI WIRE 8 SWG INCLUDING

BINDING JUMPERING ETC.

PROVIDING SINGLE PHASE SERVICE

CONNECTION WITH PVC 2.5/4MM2 TWIN

CORE CABLE FROM TERMINAL POLE TO

18 9926000018 METERING POINT INCLUDING FIXING OF No.

METER WITH METER EARTHING COMPLETE

WORK AS PER STANDARD SPECIFICATION

BUT EXCLUDING COST OF MATERIALS.

PROVIDING THREE PHASE 4 WIRE SERVICE

CONNECTION WITH PVC 4MM2/10MM2

FOUR CORE CABLE FROM TERMINAL POLE TO

19 9926000019 METERING POINT INCLUDING FIXING OF No.

METER WITH METER EARTHING COMPLETE

WORK AS PER STANDARD SPECIFICATION BUT

EXCLUDING COST OF MATERIALS.

ADDITIONAL COST FOR EXCAVATION OF PIT

IN HARD ROCK AREA FOR ERECTION OF POLE/

GUY ETC. AS PER STANDARD SPECIFICATION

OVER & ABOVE NORMAL COST COVERED

AGAINST EXCAVATION OF PIT UNDER

NORMAL SOIL FOR ERECTION OF POLE,GUY,

DOUBLE POLE STRUCTURE EARTHING WITH

THE APPROVAL OF SUPDT.ENGINEER.

PROVIDING GUARDING TO HT LINE ON

ROAD/ RAIL CROSSING.

PROVIDING GUARDING OF LT LINES ON

ROAD/RAIL CROSSING.

23 9926000023 LT LINE TAPPING- SINGLE PHASE No.

24 9926000024 LT LINE TAPPING- THREE PHASE No.

Stringing/LAYING OF OVER HEAD LT CABLE

25 9926000025 FOR ROAD CROSSING,HT LINE CROSSING AND No.

TELEPHONE LINE CROSSING ETC.(PER SPAN)

ERECTION OF SINGLE POLE STRUCTURES

WITH , HG FUSES,TRANSFORMERS,

LIGHTENING ARRESTOR, DISTRIBUTION BOX.

ON 8 METERS 200 KGAND PSC POLE

INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROM STORES TO SITE,

FIXING OF CHANNELS, SUPPORTING

26 9926000026 ANGLES,BRACINGS CROSS ARMS CLAMPS, No.

ANTICLIMBING DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLE

AND NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OFGUY SETS AND

ERECTION OF SINGLE POLE STRUCTURES

WITH MOUNTING OFAB SWITCH , HG

FUSES,TRANSFORMERS,

LIGHTENINGARRESTOR, DISTRIBUTION BOX.

ON 9 to 11 METERS RSJ POLE INCLUDING

27 9926000027 EXCAVATION OF PITS AND REFILLING OF No.

EARTH, CARTING OF TRANSFORMERS FROM

STORES TO SITE, FIXING OF CHANNELS,

SUPPORTING ANGLES,BRACINGS CROSS

ARMS CLAMPS, ANTICLIMBING DEVICES

DANGER BOARDS, CONDUCTOR AND CABLE

WIRING ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLE

AND NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OFGUY SETS AND

ERECTION OF PSC POLES OF 10 *270 KG

INCLUDING EXCAVATION OF PIT AND

REFILLING OF EARTH, FIXING OF CROSS

ARMS, TOP FITTING CLAMPS ANTI-CLIMBING

DEVICES, INSULATORS ETC. COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED

ON THE POLES AND NUMBERING WITH COST

OF PAINT AS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OF GUY SET AND

ERECTION OF DOUBLE POLE STRUCTURE OF

10 METERS 270 KG PSC POLES INCLUDING

EXCAVATION OF PITS & REFILLING OF

EARTHING, FIXING OF CHANNELS,

SUPPORTING ANGLES,CLAMPS, ANTI-

CLIMBING DEVICES DANGER

BOARDS,INSULATORS ETC.COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED

ON THE POLES AND NUMBERING WITH COST

OF PAINT AS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OF GUY SETS AND

EARTHING.(WITHOUT AB SWITCH)

STRINGING OF 100MM2 ACSR/100MM2

AAAC CONDUCTOR FOR 11/22KV & LT LINES

30 9926000030 ONE COND PER KM

INCLUDING FIXING OFINSULATORS, BINDING

STRINGING OF DOG CONDUCTOR FOR

31 9926000031 11/22KV & HT LINES INCLUDING FIXING OF ONE COND PER KM

INSULATORS, BINDING JUMPERING ETC.

ERECTION OF DOUBLE POLE STRUCTURES

WITH MOUNTING OF AB SWITCH, HG FUSES,

TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX. OF 10 METERS

KGAND PSC POLES INCLUDING EXCAVATION

OF PITS AND REFILLING OF EARTH, CARTING

OF TRANSFORMERS FROMSTORES TO SITE,

FIXING OF CHANNELS, SUPPORTING

32 9926000032 ANGLES,BRACINGS CROSS ARMS CLAMPS, No.

ANTI-CLIMBING DEVICES,DANGER BOARDS,

CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLES

AND NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND

DISMENTALLING OF 8 MTR PSC POLE WITH

CREDITING OF FABRICATION AT STORE &

STACKING OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF 10 MTR PSC POLE WITH

CREDITING OF FABRICATION AT STORE &

STACKING OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE

(8 MTR PSC POLE) (WITH TRANSFORMER)

WITH CREDITING OF FABRICATION &

TRANSFORMER AT STORE & STACKING OF

POLE SAFELY ON ROAD SIDE OR CREDITING

TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE

(8 MTR PSC POLE) (WITHOUT TRANSFORMER)

36 9926000036 WITH CREDITING OF FABRICATION AT STORE No.

& STACKING OF POLE SAFELY ON ROAD SIDE

OR CREDITING TO DEPARTMENTAL STORE

STRINGING OF LT ABC OF 1*35 SQ MM +

1*25 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION

/ TENSION CLAMP, FIXING OF CROSS ARM, LT

SHACKLE INSULATOR ETC. FOR FIXING OF

MESSENGER WIRE AND TO PROVIDE SERVICE

CONNECTION ON AERIAL BUNCH CABLE BY

INSULATED PIERCEING CONNECTORS

THROUGH SERVICE CONNECTION BOX

COMPLETE AS REQUIRED & DIRECTED BY

ENGINEER IN CHARGE.

STRINGING OF LT ABC OF 3*50 SQ MM +1*25

SQ MM+1*35 SQ MM INCLUDING FITTING OF

ALL ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, LT SHACKLE INSULATOR ETC.

FOR FIXING OF MESSENGER WIRE AND TO

PROVIDE SERVICE CONNECTION ON AERIAL

BUNCH CABLE BY INSULATED PIERCEING

CONNECTORS THROUGH SERVICE

CONNECTION BOX COMPLETE AS REQUIRED

& DIRECTED BY ENGINEER IN CHARGE.

STRINGING OF 11KV ABC OF 3*95 SQ MM

+80 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION

39 9926000039 / TENSION CLAMP, FIXING OF CROSS ARM, KM

BINDING TO PIN INSULATOR,PREPARING

SHACKLE POINT,JUMPERS ETC. AS REQUIRED

& DIRECTED BY ENGINEER IN CHARGE

STRINGING OF 22 KV ABC OF 3*70 SQ MM

+95 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION

40 9926000040 / TENSION CLAMP, FIXING OF CROSS ARM, KM

BINDING TO PIN INSULATOR,PREPARING

SHACKLE POINT,JUMPERS ETC. AS REQUIRED

AND DIRECTED BY ENGINEER IN CHARGE

STRINGING OF LT ABC OF 2*50 SQ MM +1*25

SQ MM+ 35 SQ MM INCLUDING FITTING OF

ALL ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, LT SHACKLE INSULATOR ETC.

41 9926000041 FOR FIXING OF MESSENGER WIRE AND TO KM

PROVIDE SERVICE CONNECTION ON AERIAL

BUNCH CABLE BY INSULATED PIERCEING

CONNECTORS THROUGH SERVICE

CONNECTION BOX COMPLETE AS REQUIRED

& DIRECTED BY ENGINEER IN CHARGE.

DISMENTALING OF RSJ (9/11 METER) POLE

42 9926000042 AND CREDITING THE OLD MATERIAL TO No.

DISMENTALING OF TRANSFORMER CENTER

ON 10MTR,270KG PSC POLE(WITHOUT

TRANSFORMER) WITH CREDITING OF

FABRICATION AT STORE AND STACKING OF

POLE SAFELY ON ROAD SIDE OR CREDITING

TO DEPARTMENTAL STORE

DISMENTALING OF TRANSFORMER CENTER

ON 10MTR,270KG PSC POLE(WITH

TRANSFORMER) WITH CREDITING OF

FABRICATION AT STORE AND STACKING OF

POLE SAFELY ON ROAD SIDE OR CREDITING

TO DEPARTMENTAL STORE

DISMENTLING OF 11KV ABC OF 3*95 SQ MM

+80 SQ MM AND CREDITING FITTING OF ALL

ACESSARIES AND FABRICATION TO

DEPARTMENTAL STORE

DISMENTLING OF 22 KV ABC OF 3*70 SQ MM

+95 SQ MM AND CREDITING FITTING OF ALL

ACESSARIES AND FABRICATION TO

DEPARTMENTAL STORE

DISMENTALING OF LT ABC OF 1*35 SQ MM +

1*25 SQ MM AND CREDITING FITTING OF ALL

ACESSARIES TO DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 3*50 SQ MM

48 9926000048 +1*25 SQ MM+1*35 SQ MM AND CREDITING KM

FITTING OF ALL ACESSARIES TO

DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 2*50 SQ MM

49 9926000049 +1*25 SQ MM+ 35 SQ MM AND CREDITING KM

FITTING OF ALL ACESSARIES TO

DEPARTMENTAL STORE.

RESTRINGING OF ALL TYPE OF CONDUCTOR

(EXCEPT DOG CONDUCTOR) FOR 11/22KV &

50 9926000050 ONE COND PER KM

LT LINES INCLUDING FIXING OF INSULATORS,

BINDING JUMPERING ETC.

RESTRINGING OF DOG CONDUCTOR FOR

51 9926000051 11/22KV HT LINES INCLUDING , BINDING ONE COND PER KM

LABOUR CHARGE FOR THE INSTALLATION OF

52 9926000052 NEW DTR METER. (METER WILL BE PROVIDED No.

LABOUR CHARGE FOR THE REPLACEMENT OF

DTR METER AND OLD METER SHOULD BE

CREDITED TO SDN STORE. (METER WILL BE

PROVIDED BY DGVCL)

LABOUR CHARGE FOR PROVIDING CT COIL

54 9926000054 FOR DTR METER CONNECTION. (CT COIL PER CT

WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR REPLACEMENT OF CT

COIL FOR DTR METER CONNECTION AND OLD

CT SHOULD BE CREDITED TO SDN STORE. (CT

COIL WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR FIXING OF MMB FOR

56 9926000056 DTR METER (MMB WILL BE PROVIDED BY No.

LABOUR CHARGE FOR REPLACEMENT OF DTR

57 9926000057 METER BOX. (METER WILL BE PROVIDED BY No.

PROVIDING / REPLACEMENT OF 1.5 SQ MM

58 9926000058 10 CORE COPPER CABLE 3.5 METER (CABLE No.

TO BE PROVIDED BY AGENCY)

LABOUR CHARGE FOR

PROVIDING/RECONNECTION OF TERMINAL

59 9926000059 PER TERMINATION

CONNECTION WITH PROPER SIZE OF LUGS.

(LUGS COST IS BORNE BY AGENCY)

LABOUR CHARGE FOR THE SPOT READING OF

DTR METER WITH DETAIL SURVEY OF DEFECT

IF ANY. A DULY SIGN COPY BY SURVEYOR

PERSON OF AGENCY IN PRO-FORMA REPORT

60 9926000060 SHOULD BE SUBMITTED TO SDN OFFICE.(* PER DTR

ONLY IF ALL PARAMETER OF VOLTAGE,

CURRENT & LOAD AS SHOWN IN PER-FORMA

IS FILLED) AS PER THE INSTRUCTION OF

ENGINEER IN-CHARGE.

LABOUR CHARGE FOR THE SPOT READING OF

DTR METER WITH DETAIL SURVEY OF DEFECT

IF ANY. A DULY SIGN COPY BY SURVEYOR

PERSON OF AGENCY IN PRO-FORMA REPORT

SHOULD BE SUBMITTED TO SDN OFFICE.

(DULY FILL PER-FORMA IN FAULT CONDITION

IN WHICH READING PARAMETER IS NOT

SHOWN IN METER)

INSTALLATION OF DTR METER INCLUDING

METER BOX, PROVIDING & FIXING OF 1.5SQ

MM SINGLE STRAND 10 CORE ARMOURED

COPPER CABLE (3.5METER), TERMINATION IN

METER & COIL ETC.(METER, METER BOX,

C.T./P.T. COIL WILL BE PROVIDED BY DGVCL)

INSTALLATION OF DTR METER INCLUDING

METER BOX, TERMINATION IN METER & COIL

63 9926000063 ETC. (WITHOUT 10CORE COPPER CABLE) No.

(METER, METER BOX, C.T./P.T. COIL WILL BE

PROVIDED BY DGVCL)

Binding of messanger Conductorat with a

distance not more than 0.75 mtr with 6 turns

minimum on XLPE Cable with single strand

binding wire (including cost of binding wire)

Supply and Installation of 11/22 kV

Distribution Transformers HT Terminal

65 9926000086 protector (UV Resistance) with using PER SET

95/120/150 sq.mm long barrel aluminum lug.

(1Set = 3 Nos i.e. on R, Y, B)

Supply & Installation of HT EPR Tap on 11/22

kV Distribution Transformer with

replacement of bare conductor by HT ABC

66 9926000087 conductor (DO bottom side to transformer) PER SET

after removal of semi conductor by HT ABC (6

inch both side). HT ABC to be supplied by

DGVCL. (1Set = 3 Nos i.e. on R, Y, B)

Supply, Installation, Testing and

Commissioning of Maintenance Free, Ready

Capsule, Pipe-In-Cage (Pic) Type, Earth

67 9926000088 Electrodes for HT Feeder Pole Having 2000 NO

mm Electrode Length as per the Tender

Specifications and Drawing. (All Materials Will

Be Supplied By Agency)

Supply, Installation, Testing and

Commissioning of Maintenance Free, Ready

Capsule, Pipe-In-Cage (Pic) Type, Earth

68 9926000089 Electrodes for HT Feeder Pole Having 3000 NO

mm Electrode Length as per the Tender

Specifications And Drawing. (All Materials

Will Be Supplied By Agency)

Supply and Installation of 25 X 3 mm GI Strip

having hot dip- galvanized-zinc coating of 80-

100 microns without any joints or welding.

Both the end of the GI strip should be

connected with GI nut bolts and required

fabrication work for giving separate earthing

(1) Neutral of the transformer

(2) MS structures of the transformer center

(Approximately 25 meter GI strip per

transformer centre

- as per requirement and instruction of

Engineer in- charge) (All Materials will be

supplied by Agency)

Supply and Installation of uPVC standard

make Pipe of 1.25" diameter for covering GI

strip with UV protected Cable Ties of 550 X

7.6 mm size to bind with pole

face(Approximately 25 meter uPVC pipe for

GI strip covering per transformer centre -as

per requirement and instruction of Engineer

Supply & fixing of upto 33 kV Conducotr sleev

for Busbar to Drop out Fuse and Drop out

71 9926000093 fuse to Transformer H.T. including Busbar (12 Per TC

mm sleev) as per technical specification. (All

Materials will be supplied by Agency)

Supply & fixing of upto 33 kV Conductor

sleeve for Busbar to Drop out Fuse and Drop

71A 9926000100 out fuse to Transformer H.T. without Busbar Per TC

(12 mm sleeve) as per technical specification.

(All Materials will be supplied by Agency)

Supply & fixing of upto 33 kV Conducotr sleev

for Busbar to Drop out Fuse and Drop out

72 9926000094 fuse to Transformer H.T. including Busbar(15 Per TC

mm sleev) as per technical specification. (All

Materials will be supplied by Agency)

Supply & fixing of upto 33 kV Conductor

sleeve for Busbar to Drop out Fuse and Drop

out fuse to Transformer H.T. without

Busbar(15 mm sleeve) as per technical

specification. (All Materials will be supplied

Supply & fixing of Disc type Red Color

FRP(Non-flammable) material with Weather

resistant, Non-conductive bird guard OD=300

MM, ID=33 MM, Width =1.25 MM, one side

cut from ID to OD. (All Materials will be

supplied by Agency)

Providing and fixing of LT Terminal protectors

i.e. Re-useable boot (LT Side 1.1 kV) including

74 9926000096 LT (1.1 kV) insulating taps. All live part at LT No

side shall be covered with fixing of LT

insulating taps.

75 Nylon Net around Transformer Center

76 9926000097 Nylon Net (12 * 15 ft) Per Net

77 9926000098 Nylon Dori Per TC

Labour charge for fitting Nylon Net (All

78 9926000099 fabricated material for fitting nylon net shall Per TC

be provided by DGVCL)

Cutting of Tree branches surounding HT/LT

79 9924000001 Per Tree

Replacement of old jumpers & providing new

80 9924000002 double jumpers with 8" binding [D Type] & No.

capsuling with PVC pipe etc

81 9924000005 Support pole for Stay PSC/STP/RSJ No.

Pin binding of conductor 11/22kv Pin

Pin binding of conductor 11/22kv Pin

83 9924000007 insulator per pole in costle area with cleaning No.

84 9924000008 Pin binding of conductor LT shakel insulator No.

Replacement of one/both disc.insulator at

Replacement of LT shackle insulator at cut

87 9924000011 Refixing of V cross Arm No.

Replacement of V cross Arm (With

Transportation & Painting)

89 9924000013 Refixing of Top fitting in proper position No.

90 9924000014 Replacement of Top fitting No.

91 9924000015 Replacement of LT cross Arm No.

Providing DO fuse on DP with carting &

jumpuring(ONE DO FUSE)

Numburing of pole with paint by preparing

93 9924000017 back ground of one colour and have No.

lettering(height 3" * width 0.5") using stensil

94 9924000018 Fixing of MMB(1PH.) at consumer end No.

95 9924000019 Fixing of MMB(3PH.) at consumer end No.

96 9924000020 Replacement of (1ph.) meter for Urban area No.

97 9924000021 Replacement of (1ph.) meter for Rural area No.

painting consumer no. on MMB (Urban)

(with letter size height 40mm* width 8mm)

painting consumer no. on MMB (Rural) (with

letter size height 40mm* width 8mm)

Replacement of deteriorated Single phase

Fixing of new dist. Box with complete wiring

including clamps,nut bolts etc.

Reparing of guarding involving reshaping of

bearer wire cross lacing binding etc.

Painting of steel fabricated material of RSJ DO

DP structure with paint

Painting of steel fabricated material of RSJ

104 9924000028 pole mounted transformer double pole No.

structure with paint

Painting of steel fabricated material of RSJ

single pole with paint

painting of steel fabricated material of PSC

Single pole (HT line) with paint

painting of steel fabricated material of PSC

DO DP double pole with paint

painting of steel fabricated material of PSC

108 9924000032 double pole at pole mounted transformer No.

109 9924000033 Providing line seperater single phase No.

110 9924000034 Providing line seperater three phase No.

Replacement / Providing of stay insulator

along with adjustment of tension in stay wire

Replacement of deteriorated /providing LT

112 9924000036 dist. Box with new up to 100KVA capacity & No.

crediting it to store.

Replacement of deteriorated /providing LT

113 9924000037 dist. Box with new above 100KVA capacity & No.

crediting it to store.

114 9924000038 Adjustment of tension in stay wire No.

115 9924000039 Refitting of LA No.

Converting pin point to Shackle point

116 9924000040 location

including dismentaling & restringing etc.

replacement of 11KV Pin insulator with

providing new double pin binding

replacement of 22KV Pin insulator by new

118 9924000042 11kv pin insulator with spares & providing No.

new double pin binding

Providing 11kv double disc insulators with

binding & restringing

Replacement of existing 11kv conductor (all

size) with new double pin binding

Plumbing of PSC Pole with straightening at

Plumbing of PSC Pole with straightening at

Plumbing of tilted DP structure (PSC/RSJ/STP)

with refilling of stone Murrum etc.

Providing new 11kv AB /GO switch with

124 9924000049 fabrication and insulated colour code Set

jumper, binding, lugs etc

Replacement of old 11kv AB /GO switch with

125 9924000051 providing new insulated jumper, binding, lugs Set

Providing cage type loop guard in verticle LT

126 9924000052 per pole

line with using PVC reel insulators etc

Labour charges for replacement /providing of

127 9924000053 MMB & service with all accessories for three No.

phase connection

Labour charges for replacement /providing of

128 9924000054 MMB & service with all accessories for single No.

phase connection

Dismentalling of existing Dist.X'mer

center(RSJ /STP POLE) 25/63/100/200 KVA

with all fabrication & creditig the old material

130 9924000056 Disconnection from LT pole 1 phase No.

Reconnection from LT pole 1 phase

( payment after receipt of R/C charges)

132 9924000058 Disconnection from LT pole 3 phase No.

Reconnection from LT pole 3 phase

( payment after receipt of R/C charges)

Dismentaling & removing of service line from

pole & crediting to S/dn (1 ph.)

Dismentaling & removing of service line from

pole & crediting to S/dn (3 ph.)

Reconnection of service line complete with

PVC cable (1 Ph)

Reconnection of service line complete with

PVC cable (3 Ph)

Providing spiral type earthing by G.I. NO

8(weight 2kg -5mtr in length) with salt and

coal 10kg each, including pvc rigid pipe 20mm

dia( 1.5mtr length) to pass exposed part of

G.I. wire at consumer end with all materials,

earth resistance should be less than 2 ohms

Providing and fixing of signle core 1.5 sq mm

single strand copper insulated cable with

cable nail clip for spiral type earthing at

consumer end. The end of G.I. no 8 is to be

connected by connector with copper cable of

139 9924000070 which other end shall be connected to the per meter

earth terminal of meter box. This item shall

be used in location where there is more

distance between earth terminal and earthing

terminal of meter. (All materials supplied by

Stringing of LT ABC of 1*35 SQ MM + 1*25 SQ

MM including fitting of all acessaries i.e.

special design suspension / tension clamp,

fixing of cross arm, LT shackle insulator etc.

for fixing of messenger wire and inclusive of

140 9924000065 dismantling charge of existing bare conductor KM

and crediting in to store & dismentaling of

service line from LT bare conductor and to

provide service connection on Aerial Bunch

Cable by insulated pierceing connectors

through service connection box complete as

required & directed by Engineer in Charge.

Stringing of LT ABC of 3*50 SQ MM +1*25 SQ

MM+1*35 SQ MM including fitting of all

acessaries i.e. special design suspension /

tension clamp, fixing of cross arm, LT shackle

insulator etc. for fixing of messenger wire and

inclusive of dismantling charge of existing

bare conductor and crediting in to store &

dismentaling of service line from LT bare

conductor and to provide service connection

on Aerial Bunch Cable by insulated pierceing

connectors through service connection box

complete as required & directed by Engineer

Stringing of 11KV ABC of 3*95 SQ MM +80 SQ

MM including fitting of all acessaries i.e.

special design suspension / tension clamp,

fixing of cross arm, binding to pin

142 9924000067 insulator,preparing shackle point,jumpers etc. KM

and inclusive of dismantling charge of existing

bare conductor and crediting in to store

complete as required & directed by Engineer

Stringing of 22 KV ABC OF 3*70 SQ MM +95

SQ MM including fitting of all acessaries i.e.

special design suspension / tension clamp,

fixing of cross arm, binding to pin

143 9924000068 insulator,preparing shackle point,jumpers etc. KM

and inclusive of dismantling charge of existing

bare conductor and crediting in to store

complete as required & directed by Engineer

Stringing of LT ABC of 2*50 SQ MM +1*25 SQ

MM+ 35 SQ MM including fitting of all

acessaries i.e. special design suspension /

tension clamp, fixing of cross arm, LT shackle

insulator etc. for fixing of messenger wire and

inclusive of dismantling charge of existing

144 9924000069 bare conductor and crediting in to store & KM

dismentaling of service line from LT bare

conductor and to provide service connection

on Aerial Bunch Cable by insulated pierceing

connectors through service connection box

complete as required & directed by Engineer

Labour charge for excavation of cable trench

of 400mm width x 1200mm depth, in any

type of soil for laying of cable of size up to

240 mm2 (For additional cable 200 mm

additional width shall be considered i.e. half

trench length is to be considered)

Labour charge for excavation of cable trench

of 600mm width x 1200mm depth, in any

type of soil for laying of cable of size up to

240 mm2 (For additional cable 200 mm

additional width shall be considered i.e. half

trench length is to be considered)

Labour charge for excavation of cable trench

of 400mm width x 1500mm depth, in any

type of soil for laying of cable of size up to

240 mm2 (For additional cable 200 mm

additional width shall be considered i.e. half

trench length is to be considered)

Labour charge for laying of 11kV / 22 kV XLPE

Cable of size up to 240 mm2 & preparation of

sand layer 100mm thick, in the cable trench &

covering the cable with 150 mm dia (Inner),

thickness 25 mm, 1.0 meter long RCC half

round muffs and providing and fixing of 4inch

width yellow colour polyethylene tape with

printing "CAUTION ELECTRIC CABLE BELOW"

at 0.75 m depth from ground surface after

laying cable in trench. This will provide

indication that electric cable is passing

underground so as to protect cable from

mechnical injuries, refilling the same, as per

Instruction of Engineer in Charge (EIC).

Labour charge for horizontal drilling using

Auger machine without damage to surface

road at max 2.0 mtrs depth & putting of

kg/cm2 , class-4,Green color, 110mm O.D.

8.5mm thickness H.D.P.E. pipe confirms to IS

4984-1987(3rd revision) and BIS certification

and laying of 11KV/22KV XLPE cable of size up

to 240 mm2 in HDPE pipe, as per Site

Condition (excluding cost of pipe). The detail

map obtained from HDD machine and excell

sheet(hard and soft copy) indicating the

respective depth and distance from adjacent

landmark for each segment for HDD is must

required to be submitted. HDD to be carried

out at depth 1.5 mtrs to 2.0 mtrs as per site

conditions and as per instruction of EIC.

Labour charge for horizontal drilling

manually without damage to surface road at

max 2.0 mtrs depth & putting of 6.11 kg/cm2

, class-4,Green color, 110mm O.D. , 8.5mm

thickness H.D.P.E. pipe confirms to IS 4984-

1987(3rd revision) and BIS certification and

laying of 11KV/22KV XLPE cable of size up to

6 9925000006 240 mm2 size, as per Site Condition Meter

(excluding cost of pipe). The detail map and

excell sheet(hard and soft copy) indicating

the respective depth and distance from

adjacent landmark for each segment of cable

to be submitted. Drilling to be carried out at

depth Minimum 1.2 mtrs to 2.0 mtrs as per

site conditions as per instruction of EIC.

Supply of 6.11kg/cm2 , class-4,Green color,

110mm O.D. , 8.5 mm thickness H.D.P.E. pipe

7 9925000007 confirms to IS 4984 and BIS certification for Meter

laying of underground 11KV / 22KV XLPE

cable up to 240 mm2 size.

Labour work for RCC concreting on disputed

location and repairing of damage portion of

road crossing for the work carried out for

roads crossing as well as concreting &

muffing of ploes including all materials

Providing & fixing concrete stone route

marker of 300 mm width x 150 mm thick x

650 mm height embedded in earth at least

300 mm below & 350 mm above ground level

respectively at distance approx 50 meters

along the length of cable. The RCC concreting

(1:2:4)(all necessary maeterials will be in

bidder's scope) of route marker is to be

carried out 300 mm width x 150 mm thick x

300 mm below ground level as per

instruction of EIC. The route marker should

be with name of company with approved

yellow colour-DGVCL. The distance from

marker to cable and cable depth with feeder

name etc., marked with arrow sign is to be

painted on it.The route marker is to be fixed

at location near to any fixed permanent

location (not necessary to fix exact on top of

cable) as per instruction of EIC.

Erection of D.P. (double pole) structure using

9 / 11 Mtr. RSJ pole with cable connection

arrangement along with fitting of necessary

10 9925000010 fabrication for 11KV cable including No.

excavation of pit & refilling of earth as per

instruction of EIC. (Exclusive of concreting &

muffing of poles)

Erection of Single pole structure using 9 /

Mtr RSJ pole with cable connection

arrangement along with fitting ofnecessary

11 9925000011 fabrication for 11KV/22 KV cable including No.

excavation of pit & refilling of earth as per

instruction of EIC. (Exclusive of concreting &

muffing of poles)

Erection of D.P. (double pole) structure using

8.0 Mtr. PSC pole with cable connection

arrangement along with fitting of necessary

12 9925000012 fabrication for 11KV cable including No.

excavation of pit & refilling of earth as per

instruction of EIC. (Exclusive of concreting &

muffing of poles)

Erection of Single pole structure using

Mtr PSC pole with cable connection

arrangement along with fitting ofnecessary

13 9925000013 fabrication for 11KV/22 KV cable including No.

excavation of pit & refilling of earth as per

instruction of EIC. (Exclusive of concreting &

muffing of poles)

Labour charge for erecting of 11kV / 22 kV

XLPE cable of size up to 240 mm2 on DP

Structure with fixing of 02 Nos polymer

cleats on top and middle part.Polymer

cleats, nut bolts etc. fixing material to be

provided by contractor.

Providing & fixing of 6.11kg/cm2 , class-

4,Green color, 110mm O.D. , 8.5mm

thickness H.D.P.E. pipe confirms to IS

and BIS certification on the erected DP

structure for the mechanical protection of

cable by inserting the cable inside HDPE pipe.

The HDPE pipe shall be erected in such a way

that 300mm shall be below the ground level

and the rest 2700 mm shall be supported

on the DP Structure with 01 No Polymer

cleat.All materials including polymer cleat

and Nut bolt to be provided by contractor.

Providing and fixing of pipe type earthing

from 80 mm dia class-B GI pipe with pit to be

filled with salt & coke and construction of

chamber as per DGVCL Drg. No. dg /100 for

DP and cable. The earthing pit should be

joined with cable by G.I. strip of size 1” width

& 2 mm thick. All material GI pipe, Coke, Salt

etc will be supplied by bidder.

Supply & fixing of heat shrink type end

terminations (outdoor) for upto 11kV 3C x

185 mm2 size XLPE cable as per DGVCL

technical specification

Supply & fixing of heat & shrinkable end

terminations (outdoor) for upto 22 kV 3C x

185 mm2 size XLPE cable as per DGVCL

technical specification)

Supply & fixing of heat shrink type end

terminations (indoor) for upto 11kV 3C x

mm2 size XLPE cable as per DGVCL technical

Supply & fixing of heat & shrinkable end

terminations (indoor) for upto 22 kV 3C x

185 mm2 size XLPE cable as per DGVCL

technical specification

Supply & fixing of heat shrinkable straight

through joint for upto 11kV 3C x 185 mm2

size XLPE cableas per DGVCL technical

Supply & fixing of heat shrinkable straight

through joint type for upto 22kV 3C x

mm2 size XLPE cable as per DGVCL technical

Labour charge for excavation of 2100mm

long x 1200mm wide x 1200 mm deep joint

pits for installation of 11kV / 22kV Straight

through joints as per instruction of engineer-

in-charge & covering the cable with 150 mm

dia (Outer), thickness 25 mm, 1.0 meter long

RCC half round muffs & refilling same as per

instruction of EIC .

Providing and fixing of insulating bus bar,

made from 11KV/22KV XLPE cable after

removal of semi conducting layer and

24 9925000024 applying of PVC heat shrinkable anti-tracking No.

core insulating tubing (1.1KV), on both end

terminal using Aluminium long barrel heavy

duty up to 240 sq mm lugs, Aluminium bus

connector. Taping with PG- clamp for bus

conductor as per drawing and as per

instruction of EIC. The Alluminium lugs and

PG clamp shall be covered with 11KV/22KV

HT insulating tapes.(11KV/22KV XLPE cable

will be in scope of DGVCL while all other

materials will be in bidder's scope)

Testing of cable at various points and

commissioning the feeder as per instruction

of engineer-in-charge.Test result shall be

submitted by contractor with bill.

Preparation and submission of 6 (six) copies,

of complete layout drawings with GIS

26 9925000026 mapping as per actual cable routing showing Set

road crossing, HDPE pipe sleeving, jointing

locations, markers etc.

Providing and fixing of Sign Board at junction

point Made out of 2 mm aluminium sheet

size 750x300 mm (2.5 x 1ft) rectangle, as per

design, pre treated with phosphate process

and acid etching coated with one coat of

epoxy primer and two coats of best quality

paints, refloctrorised with Hi-Intensity retro –

reflective sheeting as per the latest and frame

27 9925000027 fabricated from suitable size iron angle. The No.

Sign Board is to be fixed on the base prepared

from channel and bracing angles which is

grouted by means of cement concreting of

1:2:4 for size of 300 mm dia x 800 mm height

(500 mm to be grouted in ground). The

details to be displayed on sign board will be

given by In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

Providing and fixing of Sign Board (Danger

Board) on Distribution Transformer Centers

Made out of 2mm aluminium sheet size

300x300mm (1x1ft) as per design, pre treated

with phosphate process and acid etching

coated with one coat of epoxy primer and

28 9925000028 two coats of best quality paints, refloctrorised No.

with Hi-Intensity retro-reflective sheeting as

per the latest and frame fabricated from

suitable size iron angle. The Sign Board

(Danger Board is to be fixed at the location as

per instruction of In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

Providing & fixing of aluminium tag of size

250 mm (L) x 75 mm (W) from 3 mm

aluminium sheet along with 1.0 mm dia

aluminium binding wire for fixing of

aluminium tag near end termination joint at

DP structure for identifyng the cable. The

details of feeder i.e. 11 / 22 KV with feeder

name shound be punched on the tag by letter

punch of size 16 mm as per instruction of In-

charge Engineer.

Supply & fixing of heat shrink type end

terminations (outdoor) for 11kV 3C x

mm2 size XLPE cable as per DGVCL technical

Supply & fixing of heat & shrinkable end

terminations (outdoor) for 22 kV 3C x

mm2 size XLPE cable as per DGVCL technical

Supply & fixing of heat shrink type end

terminations (indoor) for 11kV 3C x

mm2 size XLPE cable as per DGVCL technical

Supply & fixing of heat & shrinkable end

terminations (indoor) for 22 kV 3C x

mm2 size XLPE cable as per DGVCL technical

Supply & fixing of heat shrinkable straight

through joint for 11kV 3C x 240 mm2 size

XLPE cableas per DGVCL technical

Supply & fixing of heat shrinkable straight

through joint type for 22kV 3C x 240 mm2

size XLPE cable as per DGVCL technical

Installation, Testing and commissioning of

KV,630 A SCADA Compatible, RRL type-

Way RMU including Two numbers of

earthings as per Drawing (material is in

bidder's scope) and as per DGVCL Technical

Installation, Testing and commissioning of

KV,630 A SCADA Compatible, RRLL type-

Way RMU including Two numbers of

earthings as per Drawing (material is in

bidder's scope) and as per DGVCL Technical

Installation, Testing and commissioning of

22KV,630 A SCADA Compatible, RRL type-3

Way, RMU including Two numbers of

earthings as per Drawing (material is in

bidder's scope) and as per DGVCL Technical

Installation, Testing and commissioning of

22KV,630 A SCADA Compatible, RRLL type-4

Way, RMU including Two numbers of

earthings as per Drawing (material is in

bidder's scope) and as per DGVCL Technical

Construction of plinth for 11KV, RRL type-

Way (i.e Two numbers of Isolator & One

number of Breaker) Ring Main Unit as per

DGVCL's technical specification mentioned in

drawing no: Drg. 11kv-01. All required

material will be supplied by contractor.

Construction of plinth for 11KV, RRLL type-

Way (i.e Two numbers of Isolator & Two

number of Breaker)Ring Main Unit as per

DGVCL's technical specification mentioned in

drawing no:Drg. 11kv-02.All required material

will be supplied by contractor.

Construction of plinth for 22KV, RRL type-

Way (i.e Two numbers of Isolator & One

number of Breaker) Ring Main Unit as per

DGVCL's technical specification mentioned in

drawing no: Drg. 22kv-01. All required

material will be supplied by contractor.

Construction of plinth for 22KV, RRLL type-

Way (i.e Two numbers of Isolator & Two

number of Breaker)Ring Main Unit as per

DGVCL's technical specification mentioned in

drawing no:Drg. 22kv-02.All required material

will be supplied by contractor.

Modifications e.g.Providing and fixing of

Terminal protectors i.e. Re-use able boot (HT

Side 11/22KV, LT Side 1.1KV) including 11/22

KV insulating taps and L.T.(1.1 KV) insulating

taps ,Busbar, Tapping from Bus Bar (11/22

KV XLPE cable) through P.G. Clamp for H.T.

Jumper to D.O. Fuse to bushings of

44 9925000046 Transformer Center, providing & Fixing of No.

jumper and providing & fixing of Heat

Shrinkable Anti Tracking Core Insulating

Tubing (Insulation Level 11/22 KV) in H.T.

jumper , Clamping arrangement of cable

support frame on both side of existing Over

Head type Distribution Transformer to utilize

in Under Ground cable network as per

drawing & as per instruction of Engineer

incharge. All live parts i.e. PG-Clamp,

connections of D.O.fuses, HT bushings etc .

shall be covered with fixinng of 11/22 KV HT

insulating tapes. ( 11/22 KV XLPE cable will be

in scope of DGVCL while all other materials

will be in bidder's scope ) .

Laying of any size of 11/ 22 KV XLPE /PILC

45 9925000047 Per Cable Per Mtr

Cable in redaymade trench or in open space

Labour charges for Lying of O/H XLPE cable

Supply of 150 mm dia (Inner), thickness

mm, 1.0 meter long RCC half round pipe

CARTING OF PSC POLE AT SITE PER POLE

CARTING OF RSJ POLE AT SITE PER POLE

1.DGVCL will provide key material like M.S.

materials,ABC/Bare conductors,PSC/RSJ

Poles,Insulators,Fabricated materials etc.

to the contractor.2.All fabricated items shall

be fabricated as per DGVCL approved drawing

and by welding rods confirming to the

relevent ISI specification and as directed by

Engineer in charge.3.Necessary electricity

connection for fabrication items shall be

provided by DGVCL on payment of required

charge for connection & electricity bill of the

same shall be paid by the agency.4.All the

rates are inclusive of PF & Exclusive of GST

applicable time to time.5.All steel material are

to be painted as below:(a) Scrubbing of

rusted surface properly before applying the

paints on to the RSJ poles & steel fabricated

materials of RSJ/PSC poles is must

required.(b) Two coats of approved ISI mark

red oxide (primer) is to be properly painted

for the RSJ poles & steel fabricated materials

of RSJ/PSC poles. (c) Two coats of approved

ISI mark silver paint (i.e. triple mangoes or

equivalent quality silver paint) is to be

properly painted on to the RSJ poles & steel

fabricated materials of RSJ/PSC poles.

EXECUTIVE ENGINEERING (O&M)