PROVN OF STEEL GATE, SCOOTERCYCLE STAND E RICKSHAW SHED INTERLOCKING TILES AT SINGLE LIVING ACCN AND SWIMMING POOL AND RE FLOORING OF MAIN LOBBY AT EME BARODA

Amount

Demolition of brick work built in cement mortor in any description including all quoins, arches, pillars, etc. Complete.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for gates etc.

Excavation in trenches in soft/loose soil n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, pier holes etc n exc 10 sqm on plan and getting out complete.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil complete.

Removing excavated material exc. 50m but n exc 250m and depositing where directed at a level n.exc. 1.5 m above the starting point complete.

Surface excavation n. excc 30cm deep & avergeing 15cm deep and getting out in soft/loose soil complete

Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete.

M&L for sand filling under floors or in foundations, laid in layers n exc 15 cm thick, spread levelled including watering and consolidation complete.

M&L for hard core of broken stone or boulders of gauge not exc 63 mm deposited spread and leveled in layers not exceeding 15 cm thick watered and rammed to a true surface complete.

M&L for PCC 1:4:8 type D2 using 40mm agg as in fdn, filling and mass concrete complete.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded aggregate) as in coppings complete complete.

M&L for (RCC) reinforced cement concrete 1:2:4 using 20 mm graded aggregate in foundation, footing, foundation beams, plinth beams, bases for columns, pedestal, under reamed piles, mass concrete, etc complete.

M&L for (RCC) reinforced cement concrete 1:2:4 using 20mm grared aggregate as in columns, pillars, posts, struts etc complete.

M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete

M&L for Continuous brick edging; with burnt clay bricks of old size width equal to the width of the brick; laid dry on end vertically complete.

M&L for Form work to sides of rough finished surfaces of concrete foundations, footings, bases of columns, sides and sofits (if any) of foundations & plinths beams and similar wk flat etc complete.

M&L for Formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete.

M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cracking, bending, spirally for hopping for columns hookings ends and binding with and incl mild steel wire (annealed) not less the 0.9mm dia or securing with clips complete.

do- but 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders complete.

M&L for MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., drilled for fixing of steel sheeting or othercovering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.( Fe 410-W (Gde- E-250) quality- A) complete.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) complete.

M&L for 10mm thick Light coloured vitrified tiles of size exceeding 0.42 sqm but not exceeding 1.00 sqm in floors incl 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed in coloured cement to match with the floor complete.

M&L for coloured Glazed ceramic tiles in vertical surface 350 x 250 x 7mm / 450 X 350 X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match existing surface complete.

M&L for (PCC) Plain Cement Concrete 1:4:8 type D-2 (using 40mm graded aggregate)75mm thick as in floor complete.

M&L for (PCC) Plain Cement Concrete 1:3:6 Type C-2 (40 mm graded agg) 100 mm thick as in floor complete.

M&L for 100mm thick (PCC) plain cement concrete (1:4:8) type D-2, using 40mm graded stone aggregate as in sub base complete.

S&F 28mm wide glass dividing strips, 3 mm thick, inserted in position, conform to design complete.

M&L for Machine pressed, precast plain cement concrete Interlocking paver block, factoty made( with grey cement and no pigment) conforming to IS-15658-2006, 60 mm thickness laid over and including 25 mm average thick sand cushioning layer & joints filled with sand in hardstanding etc, fabricated with M-35 grade concrete, complete.

M&L 15mm thick cement plaster on fair faces of bricks work or concrete surfaces with cement mortar 1:6 finished even and smooth (without using extra cement) complete.

M&L two coats of cement base paint on newly prepared surfaces including preperation on wall etc complete.

M&L for applying two coats of synthrtic enamel paint over a coat of red oxide including preparation ofnew surface of any description, over 10cm in width or girth, not otherwise described complete.

M&L for Rock finish cladding tiles of any colour in vertical surface, area of each tile n exc 0.015 Sqm,18 to 25 mm thick all as per Manufacturer's instructions etc complete.

M&L for Point wiring with 1.5 sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated unsheathed (FRLS) cable enclosed in & including 25mm dia PVC conduit with accessories ISI marked fixed on surface of walls/ceilings by means of PVC Sleeves / dash fastness and cadmium screws all as per IS fittings mounted on terminal box with 3 mm thick phenolic laminated sheet top cover concealed in wall. The thickness of sunken box shall be 1.2 mm. The cover shall be fixed to terminal box with brass screws incl 1.5 sqmm single core cmultistranded PVC insulated but unsheathed cable as earth continuity conductor to common earth dolly drawn in same conduit for One light controlled by one switch 6 amp one way complete.

S&F 70 watt LED post top lamp Design inspired from the classical Victorian era using new generation technology in LED to rejuvenate your outdoor areas with functionality during night and aesthetics during the day, IP65 die cast Aluminium Post top lantern designed with long life LED engine & Electronic Driver, designed for glare free symmetrical light distribution etc. and similar to cat part No TYCOONPT70WLED730 PSYMTOPC of havells complete.

Supply, laying, fixing, passing through pipe, XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 16 sqmm 2 Core complete.

S&F Sheet Metal Enclosure with socket plug top and MCBs double pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 240V, 20 Amps complete.

M&L for earthing with galvanised steel earth plate electrode 60 cm X 60 cm X 6.0 mm burried directly in ground level with top edge of earth plate at a depth not less than 2.25 m below ground level connected to and including galvanised iron strip 32 X 6 mm as earthing lead by means of bolts, nuts, check nuts and washers etc made of GI and connected to earthing test point all as shown in electric plate No. 5 of SSR indicated and testing on completion including excavation and earth work in any type of soil/rock, PCC (1:3:6) type C-1 earthing chamber, cast iron cover with lifting handle, funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 40 mm bore light grade 7.5 m long test point etc complete.

M&L for concealed point wiring with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLS cable 1100 volts grade, conforming IS 694 & color code in conduit system of wiring, drawn in & including medium grade PVC conduit not less than 20 mm dia concealed, including cutting chases, sunk in pressed steel terminal boxes of required size not less than 1.6mm thick factory made and factory painted with top cover 3 mm thick plastic laminated sheet & fixed with brass screw and washer with all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit and making good disturbed surfaces of walls, floors, etc to match with existing by means of finising of slote with cement mortor & touching with the existing colour of wall with three coats complete for One light point controlled by one switch 6 Amp one way complete .

All as described as per item No 41 above but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed FRLS cable 1100 volt grade and 2.5 sqmm PVC insulated and unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board complete.

S&F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete..

S&F Distribution board SPN 04 way factory made IP 42 protction class metal Double door including fixing and connecting of mounting MCBs isolator, ELCBs etc, confirming to IS:13032 fabricated out of CRCA sheet and provided with lable marking indicating the incoming and outgoing circuits on all way complete.

S&F MCBs SPN 6 to 40 Amps 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 Sqmm terminal capacity, insulated sliding shutter, large two position dolly, to be fixed on DB complete.

S&F MCBs SP 6 to 40 Amps 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 Sqmm terminal capacity, insulated sliding shutter, large two position dolly, to be fixed on DB complete.

M&L switch piano flush type single pole, one way 6amp, 240V complete.

S&F ceiling rose 65x17mm three terminals 230/250V complete.

Supply, Fixing, Testing and commissioning of 4' LED not less than 1X18W LED Batten with LED tube not less than 18 watt and Similar to Batten cat Part No. REGAL BATTEN8 UPTO1X22W SSBSWH and LED tube light cat part No. CRYSTAL 1213T8DS TL18W LED865S GLASS of Make Havells complete

M/S Badri Electicals

Pratik Enterprise