Tiruchirappalli City Corporation Providing Bus Shelter at Pudukottai main road Near Sempattu pudu street in Ward No.65

Earth work narrow excavation for foundation in ordinary soil light black cottonM sandy loam and dry silt including shoring strutting, baling (or) pumping out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick and depositing the surplus earth at places as directed by the dept. officers with initial lead and lift etc.complete.

Supplying and filling with M sand in layers of 15cm thick including watering and ramming to consolidation etc., including cost and conveyance ofM sand and filling etc., complete. as per standard specification

Plain cement concrete 1:5:10 mix using 40mm ISS gauge HBBG metal for foundation and flooring including curing dewatering and all other labour charges etc., complete

Providing steel centering and shuttering without strutting arrangements for RCC /PCC works upto 3m height including cost and conveyance of all materials at site and all labour charges and other incidental charges etc. complete with std. specification.

For without centering

Supplying cutting, bending & tying in position of MS / RTS grills for RCC works including cost of steel & binding wire etc., complete.

Reinforcement cement concrete 1:2:4 mix using 20mm size ISS gauge HBBG metal including mixing, laying, consolidating, curing, cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification -( Foundation and Basement )

Flooring with Pre-polished Concrete Anti-Skid Step Tiles of 20mm thick laid in cement mortor 1:3 mix 20mm thick and pointing with the same color and finishing perfectly

Supplying and fixing inposition of SS Pipe and grill using Stainless steel 304 with using necessary flats including cost of cutting,welding,fixing and polishing etc complete.

Providing and Fixing of polyurethane foam for Sloped roofas thermal insulation panels or Sandwich insulated panels with external 0.50mm total coated thickness pre painted Galvalume sheet with trapezoidal roofing profile having crest height of 38mm at every 333mm span , whereas internal 0.50mm total coated thickness pre painted galvanized iron sheet with micro ribbed profile and the insulation material will be chlorofluoro carbon and hydro chlorofluoro carbon free , high performance rigid polyurethane foam (PUF) conforming to IS 12436 having density not less than 40±2Kg/M3, Thermal conductivity (K-Value) 0.024 W/m.K measured at 10 degree C mean temperature along with necessary flashings such as L flashing, C flashing etc& accessories such as screws ,fastners ,sealants etc for fixing the panel etc., complete complying with standard specification-30mm (+38mm) thick PUF roof panel

Providing Supplying fabricating and fixing in position of Alco panelling for exterior glading work using also panell sheet 4mmtk with required colour and internal frame using aluminium rectangular box section of size 63.50mmx 38.10mmx2mm at 1.054/m and necessary aluminium 'L' angle screws , rubber materials .The aluminium frames are properly fixed into the wall or R.C.C column making necessary screws at suitable intervals . The Alco panel sheet are fixed into the aluminium frame and pasting the rubber materials . The above rates are including cost of all kind of materials scafolding charges and labour charges etc; complete.

Supply and fixing of LED OUTDOOR FITTINGS (LIGHT EMITTING DIODE) HIGHER END - 48W LED Street Light Fitting with LED etc.,complete

Supply and run of 2 of 6 sq.mm (84/0.3) PVC insulated SC unsheathes Cu. Conductor of 1100 V on 7/20 GI bearer wire for service connection mains SD 66

Supply and run of 2 of 6 sq.mm (84/0.3) PVC insulated SC unsheathes Cu. Conductor of 1100 V on Both side 25mm dia GI bend pipe SD 71

SupplyandfixingofTNEBmeterboardsuitablefor32Asinglephaseserviceconnectionwith32Afuseunit(500V)32Aneutrallinkandearthlink(1"x1/8"copperflat)onTWplankofsize375mmx300mmx19mmwithsupportingTWreepersof1"thickaneithersidewithpaintingwithsuitableboltandnutsforfixingtheTWplankonwallwithearthconnectionandinterconnectionwith7/20PVCinsulatedcopperwirefromEBmetertofuseunitwith1No40Amp30MA Double Pole RCD / RCCB (Higher End) with suitable necessary connection SD -125

Supplying and Installing Metal False Ceiling using Fire Retardant Galvanized Steel Sheet Plain lay in tile size 600mm x 600mm, 0.5mm thick, powder coated on external surfaceand shall have flange on all four sides to rest on the exposed grids. The system to give 600mm x 600mm centre to centre T’. The ‘T’ shall be not be dipped GI Tee Section 3600mm long main Tee. 24mm wide and cross Tee panels are formed by running main runner of ‘T’ section of size 30mm x 24mm powder coated at bottom at intervals with powder coating at bottom. Necessary provision of inter locking of ‘T’ section are made at required intervals not exceeding 1200mm. The main runners are suspended from the ceiling by means of 4mm dia. GI rods fixed to the ceiling using anchor fasteners of 50mm x 8mm size with nylon inset and hooked to the main rubbers using clips. The last hangers at end of each rubber should not be greater than 600mm from the adjacent wall. The last panel shall be placed at the side wall using edge profile ‘L’ Angle of size 20mm x 20mm and fixed to the side wall the false ceiling should be fixed of same level and should present a neat look