REPAIRS TO JOINERY, ROLLING SHUTTERS, STEEL DOOR, STEEL GATES AND SERVICING AND GREASING IN DOMESTIC AREA AT AF STN PHALODI

Amount

Taking down existing steel rolling shutters area not excedding 20 sqm with all connecting items and repairs/ replace the lath of steel rolling shutters and locking arrangements, greasing, tightening of helical wire spring including welding wherever required, oiling, etc complete and make in servicable condition and applying two coat of synthetic enamel paint including preparation of old painted surfaces and refixing in the same opening complete all as specified and directed. Notes :- (i) Lath of steel rolling shutters, lock plate with locking arrangement and shall be measured and paid for separately. (ii) Spring will be included in the rate of item. (iii) supply only unserviceable items shall be measured and paid separately under respective items.

Taking down existing steel rolling shutters area not excedding 20 sqm complete all as specified and directed.

S&F 1.25mm thick Steel rolling shutters, without ball bearing, as specified incluiding top cover, anchring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; push pull or manual type complete all as specified and directed.

Supply only Ball bearings for rolling shutters complete all as specified and directed.

Supply only Saftey lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

Supply only laths for rolling shutters (thickness of lath 1.25 mm) complete all as specified and directed.

S&F pre fabricated lock plate length not less than 2.20mm and not more than 4.00 mm and width not less than 0.15 m and not more than 0.20m of riveted construction made out of mild steel sheet 3.15 mm thick ,rainforced with mild steel angle 3 x 35 x 5 mm size at bottom and locking arrangement with two 50 mm bow handles and flat iron 25 x 3 mm to fix the lath and lock plate complete all as specified & directed.

S&F of guide channel,made out of 2.00 mm thick MS sheet size 75 x 30 mm including taking down the existing guide channel from rollingshutter and fixing with wall / column etc and making good with (1:2:4) PCC and cement work (1:3) and two coat of synthetic enamel paint on over a coat of red oxide primer complete all as specified and directed.

M&L for 2 mm thick MS sheet hood cover of rolling shutter to accommodate the spring and lath when rolling shutter open including two coat of synthetic enamal paint over a coat of red oxide primer including taking down old existing cover complete all as specified and directed.

M&L for preparation of new untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down existing steel rolling shutters of size 3.20 x 4.00 m with all connecting items and repairs/ replace the lath of steel rolling shutters and locking arrangements, greasing, tightening of helical wire spring including welding wherever required, oiling, etc complete and make in serviceable condition and applying two coats of synthetic enamel paint including preparation of old painted surfaces and refixing in the same opening complete all as specified and directed. Notes :- (i) Lath of steel rolling shutters, lock plate with locking arrangement and shall be measured and paid for separately. (ii) Spring will be deemed to included in the unit quoted rate. (iii) Unserviceable items shall be measured and paid separately as supply only under respective items.

Supply only Structural steel, rolled section such as joist, beam, channel, angle, tee, in available lenghts complete all as specified and directed.

Supply only Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 sqm each complete all as specified and directed.

Taking down shutters exceeding 1.0 Sqm and not exceeding 2.0 Sqm each and refixing in same opening after resecuring or easing and adjusting complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frames) not exceeding 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frames) not exceeding 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified and directed

S&F Factory made PVC single door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as per specification and drawing of SSR Part-I and the door frame to be fixed to the wall using MS screw 75mm long with PVC fastener as per manufacturer's, instruction complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified and shown on SSR 2020 (Part-II) complete all as specified and directed.

S&F 100 mm Butt hinges stainless steel complete all as specified and directed.

S&F Pressed steel frame made out of MS Sheet 1.25mm thick for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. Note:- During fixing of chowkhat, surface shall be make good in plumb with existing finishies like cement plaster simlar wall tiles, floor tiles etc as per site requirement.

S&F Pressed steel frame made out of MS Sheet 1.25mm thick for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. Note:- During fixing of chowkhat, surface shall be make good in plumb with existing finishies like cement plaster simlar wall tiles, floor tiles etc as per site requirement.

M&L for PCC (1:3:6) type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame and hold fast block complete all as specified and directed.

S&F 2nd class Hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

M&L 25 mm thick block board grade 2 quality interior grade decorative face veneers on both face fixed with screw to frame work or as in kitchen cabinet and cupboards complete all as specified and directed.

S&F 100mm size hasp and staple, safety type of aluminiun anodised complete all as specified and directed.

S&F continous piano hinges mild steel bright finish or electrogalvanised of 30mm width complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood glazed & skelton shutters (factory made) open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded mitred and rabated sash bars any number, edges of framing plain chamfered or rounded fitted with cut mitred beads for securing glass etc; sizes of members of shutters as specified in SSR Part-I Section- 8 clause 8.24 (a) and fitted to frames/chowkats as in door shutters. (wood shall be kiln seasoned and chemically pressure treated) complete all as specified and directed.

S&F factory made 35mm thick, IInd class hard wood plain, framed, panelled shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

M&L Preparing new wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repair 150 mm long aluminium, anodised, barrel tower bolt (ISI marked) of extruded section fixed complete all as specified and directed.

S&F in repair 200 mm long aluminium, anodised, barrel tower bolt (ISI marked) of extruded section fixed complete all as specified and directed.

S&F 200 mm long aluminium, anodised, barrel tower bolt (ISI marked) of extruded section and fixed complete all as specified and directed.

S&F 150 mm size extruded aluminium alloy handle, (ISI marked) fabricated type anodised fixed complete all as specified and directed.

S&F in repair 150 mm size extruded aluminium alloy handle, (ISI marked) fabricated type anodised fixed complete all as specified and directed.

S&F 150 mm size double action spring hinges, mild steel with steel wire spring, stove enamelled, black fixed complete all as specified and directed.

S&F in repairs 150 mm size double action spring hinges, mild steel with steel wire spring, stove enamelled, black fixed complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt (ISI marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repairs 250 mm long aluminium alloy, anodised, sliding door bolt (ISI marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repair grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.

S&F in repair 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repair door closer hydraucally regulated,cast iron body designation No. 2 universal type, suitable for door shutters up to 701 to 850 mm in width and of weight not more than 36 to 60 kg and fixed complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repairs 18 mm to 20 mm dia curtain rod/rail, anodised aluminium alloy, chromium plated with & including fixing brackets, stops etc complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks, or stainless steel wire staples including etc complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks, or stainless steel wire staples including etc complete all as specified and directed.

S&F second class hard wood fillet, wrought, cross sectional area exceeding 3 sqcm but n.exc 6 sqcm fixed with nails complete all as specified and directed.

S&F in repairs second class hard wood fillet, wrought, cross sectional area exceeding 3 sqcm but n.exc 6 sqcm fixed with nails complete all as specified and directed.

Welding in repairs to any description of metal exc 2.5cm but n exc 5cm in length and thickness of welded not exc 6 mm complete all as specified and directed.

Hacking out old broken glass (any thickness) and size from metal frame glazed with putty and removal of debris to a distance n.exc 100 mtr and depositing where directed complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated (thickness of powder coating shall not be less than 50 micron) anodised aluminium window and ventilator shutters, side hung shutter type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, srew, anodised aluminium fitting such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 No) suitable handle (2 No) complete all as specified and directed.

S&F powder coated (thickness of powder coating shall not be less than 50 micron) anodised aluminium door shutters (fully glazed, comprising of shutters top rail 86.17x44.45x2.3 mm, bottom and lock rail 150x44.45x2.3mm and styles 53.7x 44.45x2.3mm and including jointing cleats, aluminium snap beading 20x15mm, rubber gasket, glazing clips and with aluminium hard ware fitting fixed with steel chromium plated screws such as 2 Nos D type handle, 2 Nos 100 mm long barrel tower bolts, one floor door stopper, one brass mortice 7 lever door lock etc complete complete all as specified and directed.

S&F framed work such as grills, grating, etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work or water tanks and similar work conforming to Fe 290 – Gde – 165 complete all as specified and directed.

Taking down shutters of any description not exceeding 1.00 Sqm complete all as specified and directed.

S&F in repair CP Health faucet of 15mm bore with stand fixed on wall in CP hose pipe 1 mtr length and stainless steel screw as approve complete all as specified and directed.

S&F in repair elegant mirror PVC cabinet with towel rail of size 475x600x150mm complete all as specified and directed.

S&F in replacement 18mm thick of integral PVC foam sheet manufactured by ISO:900, ISO:14001, ISO:18001 fixed with screw, solvent cement/adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per directed by the Engineer-in-Charge (Density - 525 GM/CC) Note :(i)The integral foam sheet should be procured from authorised dealar of manufacturing company. (ii) The contractor has submit test certificate in favour of integral foam sheet.

S&F in repair Kitchen basket stainless steel size 435mmX510mm made of 4mm dia stainless steel wire of 202 grade, including stainless steel guide channel complete all as specified and directed

KRISHNA CONSTRUCTION COMPANY

M/S VISHNOI ENTERPRISES