Loading…
Loading…
Tender Value
₹25.4 L
EMD Value
₹25,400
Closing Date
10 Jun 2026, 6:00 pm5d left
Executive Engineer, Unit-2, SoUADTGA, Ekta Nagar
Construction of a Crematorium (Smashan) at VagadiyaVillage, TA.-Garudeshwar, Dis.-Narmada
308494
04 of 2026-27
Open
Civil Works - Others
Narmada
12 documents required · 12 mandatory
₹1,770
CEO, SoUADTGA
₹25,400
26 May 2026
26 May 2026
27 May 2026
10 Jun 2026
27 May 2026
Name of Work :-Construction of a Crematorium (Smashan) at VagadiyaVillage, TA.-Garudeshwar, Dis.-Narmada
Qty. Unit Items without GST
78.00 Cumt Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful
materials and disposing off the excavated stuff upto 50 Meter lead. (D) Soft rock not
requiring Blasting
Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and
20.00 Cumt stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.
(D)Soft rock not requiring Blasting
Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 4-
graded stone aggregates 20 mm nominal size) and curing complete including cost of
formwork and reinforcement for reinforced concrete work in (A) Foundations, footings,
Base or columns and Mass concrete (P.C.C)
Provinding and laying controlled cement concrete M -250 and finishing smooth
with curing etc complete, including the cost of formwork but excluding the cost
of reinforcement for R.C.C. work in(A) Foundations,
footings, Base of Columns and Mass concrete.
Providing and laying controlled c.c. M.250 & curing complete including the cost of form
3.00 Cumt work but Excluding the cost of reinforcement for reinforced concrete work in Columns,
pillars, posts & struts upto floor two level for G.F
Provinding and laying controlled cement concrete M -250 and finishing smooth
6.00 Cumt with curing etc complete, including the cost of formwork but excluding the cost of
reinforcement for R.C.C. work in (A) plinth Beam
Filling available excavated earth (Excluding rock) in trenches plinth, sides of
0.77 Cumt foundation etc in layers not exceeding 20 cm in depth consolidating each deposited
layer by ramming and watering.
Filling in foundation and plinth with murrum or selected soil in layers of 20cm.
thickness Including watering, ramming and consolidating etc. complete.
Anti-Termite System:Providing and laying of permanent piping technology
anti-termite treatment before flooring work by installing LLDP (Low linear
density polyethylene) tube of 8 mm O.D. & 6.4 mm 1.D. with inbuilt pressure
compensation chip every 30 cm interval in the tube, having working pressure of
Kg/cm2 and release rate of 1.9 Itr/hour fixed by P-clips and nails. The LLDP
pipe shall be installed at the entire periphery of the building and at internal
network of building at a depth of 20 to 200 mm under floor at every 2 to 3 mtr. c/c
distance (adjusted as per building layout ) & Ends of loop pass through a PVC
81.00 Sqmt elbow of minimum 32 mm ID at junction box of wall and floor level, entering into a
steel reinforced grooved flexible pipe of minimum 22 mm ID leading into junction
box and the loops shall terminate in junction boxes & test every junction during
injecting chemicals for termite control treatment. The anti termite chemical
Imidacloprid 30.5% SC mix as per IS-6313 (part III) shall be injected by the
pressure pump diluted with water @ 10.5 ml/5 ltr of water at the rate of 2 Kg/sq.cm
@ 5 Ltr/SMT. The contractor shall submit approved line plan for piping
system and junction boxes dully approved by Engineer-in-Charge with bond of
5 year warranty.(i)Permanent pipe system with junction
Providing and laying damp proof course 25mm thick cement concrete 1:2:4 (1-Cement :
2 coarse sand : 4 stone aggregate 10 mm nominal size) and curing complete
Brick work using common burnt clay building bricks having crushing strength not
11.00 Cumt less than 35 kg./Sq.Cm. In foundation and plinth in Cement Mortar 1:6 (1-Cement : 6 -
fine sand) (B) Conventional
Half brick masonary in Common Burnt Clay building bricks having crushing strength
not less than 35 kg/sq.cm in super structure above plinth level upto floor two level in
cement mortar 1:4 GF ( 1 cement : 4 fine sand) (B)
Providing and laying controlled c.c. M.200 & curing complete including the cost of form
5.00 Cumt work but excluding the cost of reinforcement for reinforced concrete work in Collumns,
pillars, posts & struts upto floor two level for FF
Providing and laying controlled c.c. M.200 & curing complete including the cost of form
1.00 Cumt work but excluding the cost of reinforcement for reinforced concrete work in Collumns,
pillars, posts & struts upto floor two level for
Providing and laying controlled c.c.M.200 & curing complete including the cost of form
9.00 Cumt work but excluding the cost of reinforcement for reinforced concrete work in Beam upto
floor two level for G.F.
Providing and laying controlled c.c.M.200 & curing complete including the cost of form
2.00 Cumt work but excluding the cost of reinforcement for reinforced concrete work in Beam
upto floor two level for G.F.
Providing and laying controlled c.c.M.200 & curing complete including the cost of form
Cumt work but excluding the cost of reinforcement for reinforced concrete work in
Slabs,landing,cantilevers upto floor two level for G.F.
Providing and laying Controlled cement concrete M200 and curing etc. complete
14.00 including the cost of form work but excluding the cost of reinforcement. (C)
Slabs Landings shelves Balconies ,Lintel -chhaja ,beams
,girders and cantilever up floor to level (GF)
Brick work using common burnt clay building bricks having crushing strength not less
3.00 Cumt than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine
sand)(A) Modular….Extra for brick work in superstructure above floor two level Item
No. 1(6.12) (A) Modular
Providing and laying Controlled cement concrete M200 and curing etc. complete
3.00 Cumt including the cost of form work but excluding the cost of reinforcement. (C)
Slabs Landings shelves Balconies ,Lintel -chhaja ,beams ,girders and antilever up
floor to level (GF)
Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including
bending, binding and placing in position complete upto floor two level (GF)
Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base
of cement mortar 1:6 (1- cement : 6-coarse sand) or L.M. 1.1.5 laid over and
jointed with grey cement slurry including rubbing and
polishing etc. complete. (B) 30 mm thick
Providing and laying 18 mm thick machine cut, free edges, machine polished Black
4.00 Rmt Marble tread and risers in single piece with 1 cm nosing and necessary grooves and
round edge polish on treads etc. complete.
Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness
including watering, remming and consolidating etc. complete. (For Top Filling)
Providing 15mm thick cement plaster in single coat on brick/concrete walls for
170.00 Sqmt interior plastering upto floor two level and finished even and smooth in (i)Cement
mortar 1:4 (1-cement:4-sand)
20mm thick sand faced cement plaster on walls upto height 10 metres above ground
291.00 sqmt level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm
thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.
Applying two coats of Birla or Asian acrylic lappy (putty) and two coats of
primer of approved brand and manufacture on new wall surface to give an even
shade including thoroughly brushing the surface free from mortar dropping and other
foreign matter and sand papered smooth. For ceiling
Finishing wall with weather proof exterior emulsionpaint on wall surface (two coats) to
give an requiredshape even shade after thoroughly brushing the surfaceto
remove all dirt, and remains of loose
powderedmaterials.etc complete
Wall painting two coats with plastic emulsion paint of approved brand and
manufacture on wall surfaces to give an even shade including throughly brushing
the surface free from mortar droppings and other foreign matter and sand papered
smooth on ceiling.
Providing and fixing M. S. Grills of required pattern over wall with M.S. flats at required
spacings and frame alround square or round bars with round headed bolts and nuts or by
screws ( Ornamental Grill) including primer coat of approved quality and two coats (A)
Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of
14.00 Sqmt steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse
sand ) finishing with flush pointing in white cement
Steel work, welded in built up sections framed work including cutting, hoisting, fixing in
2439.00 kg position and applying a priming coat of red lead paint. (D) In trussses and trussed
purlins, upto 25 M. span and 15 M. ovarall height.
Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L
Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I. limpet
washer. filled with white lead complete excluding the cost of purlins, Rafters and
Trusses.(1) 0.80 mm thick sheet.
Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm
thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as
126.00 sqmt per approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for
levelling and filling the joint with sand in proper line and level as per guidlines of IRC :
SP 63-2018 etc. Complete.
Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block
30cm length,30cm height and 15cm thick of M250 grade concret as per approved design
and including excavation for fixing in proper line and level,filling the joint with C:M 1:3
(1cement:3fine sand) etc complete.
1000 Litre Providing erecting and fixing double coated ISI water tank of required capacity each with
all necessary fittings and connection etc. complete on terrace
5.00 No.s Providing and fixing screw down bib taps of following size.(A) Brass screw down bib
tap polished bright. (ii) 20mm dia
30.00 Rmt Providing and fixing screw down bib taps of following size.(A) Brass screw down bib
tap polished bright. (ii) 20mm dia
Pre cast Benches as per Design
Total in Rs (Without GST).
Deputy Executive Engineer,
SoUADTGA. SubDivision 2/1,
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
SBD FINA Samshan.pdf
specification.pdf
Schedule B (BOQ).pdf
samshan drawing.pdf
Ref Image.jpg
JPG
Download all tender documents and submit your bid