Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.2 LAccepted-AOC | L1 | Accepted-AOC Order No. ADFW/6036/2024 TGII(2) DATED 04-07-2024 | |
| 2 | Rejected-Technical | - | Rejected-Technical Invalid |
| Sl No | Description | Qty | Unit | VIJAYAN ENTERPRISES |
|---|---|---|---|---|
| 1.00Supply, installation, testing and commissioning of Submersible Close Coupled Pump Set with the specification listed below, suitable for handling silty water with small salt particles with RPM 960 (syn) or less. The material of construction of the casing, suction bell shall be CIFG 260 with 2% Nickel, Impeller SS316, Shaft and sleeve should be SS 316, The Suction (in the case of Tubular Column Casing Pumps) and delivery pipe length shall be (varies from 2 to 10 m length as per site conditions) of SS304 with 6mm minimum thickness and of suitable diameter to carry the flow properly. Discharge Pipe Outlet should be fitted with a Spring-Loaded Lid with opening and closure Arrangements. All the piping, Welds, Joints etc should be done properly with good craftsmanship. The prime mover for the pump should be 3 phase TEWC squirrel cage submersible induction motor suitable for 415V +/- 10%, 50 Hz +/- 5% connection with Class F insulation, cubicle type ATS / Fully Automatic Star-Delta starter panel board with all necessary protection units and instrumentation. starter of reputed make, including MCCB, RCCB, ELCB of suitable metering, LED indications, Selector Switch, Single phase and dry run protection wiring and earthing as per regulations and specifications of KSEB and Electrical Inspectorate. Suitable water proof, copper power cable minimum 20m length or as per site requirement should be provided. All the electrical Connections and laying out of cables and wires should be done using suitable external conduits neatly fixed on the wall. GI weld mesh made of 6 mm thick with metallic strainer of mesh size not more than 50mm x 50mm should be fitted at pump inlet and top of the Sump to prevent entry of unwanted material to the pump through inflow water. Any hanging portion of the pipe should be supported with suitable metallic supporting frames. The rate quoted should inclusive all the charges for supply, installation including petty civil works, trial run and commissioning, all type of transportation and conveyance, loading and unloading charges, factory testing etc. excluding GST | ||||
| 1.01 | 1. Duty point head (m): 3
2. Minimum discharge at duty point head (lps): 330
3. Working head range(m): 2 - 5
4. Working discharge range (lps): 340 - 290
5. Minimum Overall efficiency at duty point head (%): 70
6. Connected Load Available (Hp ): 25 | 1 | Nos | 12,20,000 ₹12,20,000 Lowest |
Tender Value
₹14 L
EMD Value
₹14,000
Closing Date
23 Mar 2024, 5:00 pmClosed
Executive Engineer Agri Alappuzha
O/o Executive Engineer Agri Alappuzha
Retender Supply, installation, testing, trial run and commissioning of 1 Number of 25 hp Submersible Dewatering pump for Manjanakulam padasekharam, Pathanamthitta District
2024_AGRI_647821_2
ADFW/EXE/ALP/10/2024-EE(2)
Open Tender
Equipments
Item Wise
90 days
Manjanakulam padasekharam, Pathanamthitta District
Please refer Tender documents.
6 documents required · 6 mandatory
₹2,800
Yes
₹14,000
Yes
O/o Executive Engineer Agri Alappuzha
17 Sept 2025
7 Mar 2024
25 Mar 2024
7 Mar 2024
23 Mar 2024
7 Mar 2024
13 Mar 2024
1. Duty point head (m): 3 2. Minimum discharge at duty point head (lps): 330 3. Working head range(m): 2 - 5 4. Working discharge range (lps): 340 - 290 5. Minimum Overall efficiency at duty point head (%): 70 6. Connected Load Available (Hp ): 25
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .