Loading
Loading…
Loading…
Tender Value
₹11.7 L
EMD Value
₹23,416
Closing Date
9 Oct 2026, 4:00 pm5d left
Executive Engineer (BM-PK)
Room No.1615, 16th Floor, Palika Kendra, New Delhi
Renovation of 3rd floors toilet blocks of Palika Kendra Building.
2026_NDMC_299305_1
NITNO.63/EE(BM-PK)/2026-27
Open Tender
Civil Works
Works
120 days
NDMC
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹23,416
1 Oct 2026
1 Oct 2026
9 Oct 2026
1 Oct 2026
9 Oct 2026
1 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) | 5 | Cubic Metre | 8,442.7 | ₹42,213.5 |
| 2 | Centering and shuttering for including proping etc. and removal of form bar shelves (cost in situ) | 20 | Square Metre | 938.55 | ₹18,771 |
| 3 | Steel bars reinceforcement for R.C.C work including straight cutting bending placing in position and binding all complete upto plinth level | 30 | kg | 109.15 | ₹3,274.5 |
| 4 | Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : With F.P.S.(non modular) bricks. | 2 | Cubic Metre | 9,413.45 | ₹18,826.9 |
| 5 | Half brick masonry with common clay F.P.S(non modular )brick of class designation 7.5 in superstructure above plinth level up to floor 5 level. Cement mortar 1:4 (1cement :4 coarse sand) | 9 | sqm | 1,137.5 | ₹10,237.5 |
| 6 | Providing edge moulding to 18mm thick marble stone counters, vanities etc. including Machine Polishing to edge to give high glass finish etc. complete as per design approved by engineer in charge Granite work. | 10 | mtr | 517.2 | ₹5,172 |
| 7 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Second class teak wood. | 0.3 | Cubic Metre | 1,44,695.4 | ₹43,408.62 |
| 8 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. | 17 | Square Metre | 2,421.85 | ₹41,171.45 |
| 9 | Extra for providing lipping with 2nd class teak wood batten 25mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured) | 17 | sqm | 468 | ₹7,956 |
| 10 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick. | 34 | sqm | 908.25 | ₹30,880.5 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.12 MB
BOQ_399437.xls
BOQ • 0.44 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .