Construction For Anganavadi Navjivan (Shashtrinagar) And Brahmaninagar-2 At-Himmatnagar Nagarpalika,Himmatnagar District :Sabarkantha

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or

Providing and laying cement concrete 1:4:8 (1 cement :

coarse sand : 8 B.T. machine crushed stone aggregates

mm nominal size) and curing etc. complete excluding cost of

form work in foundation and plinth.

Providing and laying ordinary cement concrete 1:1½:3 (M-

200) using B.T. stone aggregate and curing of concrete

3 complete, including the cost of form work but excluding the 6.50 5020.77 Cum

cost of reinforcement for R.C.C. work in (A) Foundations,

footings, base of columns and mass concrete.

Providing and laying ordinary cement concrete 1:1½:3 (M-

200) using B.T. stone aggregate and curing of concrete

4 complete, including the cost of form work but excluding the 2.10 8023.27 Cum

cost of reinforcement for R.C.C. work in Columns up to

Providing and laying ordinary cement concrete 1:1½:3 (M-

200) using B.T. stone aggregate & curing complete including

the cost of form work but excluding the cost of

reinforcement for R.C.C. work in Ground Beam.

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

6 exceeding 20 cm. in depth consolidating each deposited 5.30 136.92 Cum

layer by ramming and watering.

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine

sand)(B) Conventional

Filling in foundation and plinth with murrum or selected

soil in layers of 20cm. thickness including watering, ramming

and consolidating etc. complete.

Filling in plinth with sand under floors including watering

ramming, consolidating and dressing complete

Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite control

treatment including labour and material consistment with

I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC.

10 As Per 6131_paret-II Consentration Weight one percent is 92.00 86.82 Sqm

recommended i.e one litre 20 EC chemical emulsion with

liter give 1 % concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical / Sqm of

surface is recommended as per I.S

Providing and laying cement concrete 1:2:4 (1- Cement : 2-

Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

Providing and laying ordinary cement concrete 1:1½:3 (M-

200) using B.T. stone aggregate and curing of concrete

12 complete, including the cost of form work but excluding the 5.50 8023.27 Cum

cost of reinforcement for R.C.C. work in Columns for all floor

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg/Sq.Cm. in

13 superstructure above plinth level upto floor two level in 39.80 4526.75 Cum

Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B)

Conventional brick etc. complete

Providing and laying cement concrete 1:3:6 (1-Cement : 3-

coarse sand : 6- B.T. machine crushed stone aggregates

mm nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

Providing and laying ordinary cement concrete 1:1½:3 (M-

200) using B.T. stone aggregate and curing of concrete

15 complete, including the cost of form work but excluding the 9.90 8143.38 Cum

cost of reinforcement for R.C.C. work in Lintels for all floor

Providing and laying ordinary cement concrete 1:1½:3 (M-

200) using B.T. stone aggregate and curing of concrete

16 complete, including the cost of form work but excluding the 7.40 5774.64 Cum

cost of reinforcement for R.C.C. work in Beams for all floor

Providing and laying ordinary cement concrete 1:1½:3 (M-

200) using B.T. stone aggregate and curing of concrete

17 complete, including the cost of form work but excluding the 16.60 6282.08 Cum

cost of reinforcement for R.C.C. work in Slab for all floor

Providing TMT Bar FE 500D reinforcement for R.C.C. work

including bending, binding and placing in position complete

upto floor two level

Providing and fixing both sides polished machine cut kota

stone shelves / partition of single piece (maximum 150 cm)

25 mm thick embedded into wall with groove in cement

19 mortar 1:2 (1 cement : 2 fine sand), including racking and 16.70 617.60 Sqm

finishing smooth the surface, including joined with grey

cement, rubbing, cutting the stone as and where required

etc. completed.

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and

smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

including finishing with a floating coat of neat cement slurry

for Ground Floor

Providing 10 mm thick cement plaster in single coat on

brick / concrete on ceilings and sofits of stairs for interior

plastering upto floor two level and finished even and

smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

including finishing with a floating coat of neat cement slurry

Providing 20mm thick cement plaster in single coat on single

or half brick walls for interior plastering upto floor two level

22 and finished even and smooth in (i) Cement mortar 1:4 (1- 312.00 259.69 Sqm

cement:4-sand) including finishing with a floating coat of

neat cement slurry for Ground Floor

P & L 24" x 24" vitrified 8 mm thick tile flooring over

mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing flooring by

23 adhesive material including dismentaling of existing flooring 119.00 1311.18 Sqm

and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for light

Providing and laying Ceramic tiles 6mm thick in skrting

risers of steps and dedo on 10mm thick cement plaster 1:3

(1-cement : 3-coarse sand) and jointed with white cement

Providing and laying Ceramic tiles 6mm thick in flooring

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with

flush pointing in white cement.

Providing and fixing 18 mm thick mirror polished Granite

stone of machine cut & full round edge and polished of

approved quality in cladding on sill and around the Doors /

windows / ventilation with 20 mm thick cement plaster 1:3

and jointed with white / matching pigment cement slurry &

adhesive, including polishing & moulding of exposed edges

etc. complete for all floor level as directed by Engineer-in-

Constructing a Sandwich type cooking platform of 60 cm

width and 70 cm height resting with Granite polished stone

top and 100 mm height faces in exposed faces with 18 mm

thick of polished Granite stone of approved colour and

quality on 25 mm x 2 No polished Kota stone sandwich

supports, polished kota stone shelves and fixing stone using

cement mortar 1:2 (1 cement : 2 fine sand) for sandwich

and fitting at bottom & edges with water proof rigid

adhesives, including mocking necessary grooves in walls,

polishing and making edges etc. complete as directed by

Engineer-in-charge. (Only top clear area of platform shall be

measured and paid for)

Providing and fixing Stainless steel kitchen sink Glossy ASIS

304 grade and 1 mm thick with over all size 510 x 432 x

and bowl size 455 x 368 x 190 mm of approved brand as

directed by Engineer-in-charge with all fittings like C.I. or

M.S. brackets painted white / or fixing on stone base,

including cutting holes and making good the same, 32 mm

dia Brass waste and M.I. fisher union fitting, including all

necessary fittings etc. complete.

Providing and fixing standared extruded of alluminium

section of size 63mm x 38.10mm x 1.2mm @ Wt.

29 Kg/Rmt with colour anodized alluminium frame for 0.80 1175.56 Sqm

ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

Providing and fixing extruded colour anodized aluminium

three track sliding window having aluminium section having

outer frame for bottom member of size 92.00 x 31.75 x

mm size weight of 1.07 KG / Rmt and outer frame for top

and sides members size 92.00 x 31.75 x 1.50 mm size weight

of 1.06 KG / Rmt, for shutters using top and bottom size 40 x

18 x 1.29 mm size weight 0.456 KG / Rmt & interlock

member size 40 x 18 x 1.29 mm size weight 0.456 KG / Rmt

30 & handle member size 40 x 18 x 1.29 mm size weight 0.456 17.20 3171.70 Sqm

KG / Rmt with 5 mm thick transparent bronze colour tinted

float glass for shutter and fixing wire net shutter of Stainless

Steel wire of 304-grade of IS Gauge designation 85-G with

wire of 0-56 mm diameter as a third sliding shutter with

necessary fixtures and fastening like rubber gasket and

transparent silicon sealant glass fixing to frame etc.

complete as per drawing and instruction of Engineer-in-

Providing and fixing 35 mm thick shutter for door having

factory made solid core, melamine faced, three layered resin

flushed door of approved brand and manufacture, with

mm thick decorative laminated sheet on both side with

mm thick and 35 mm x 35 mm specially shaped moulded

teak wood beading fixed around the door with necessary

fixtures and fastenings like S.S. butt hinges, S.S. Aldrop, S.S.

Handle size 15 cm long, stopper, door closers arrow type

etc. complete as per detail colour & pattern approved by

Engineer-in-charge.

Providing and fixing M.S. plain Grills (Safety Grill) / Shutter

of required pattern to wooden frames of window / Door etc.

with M.S. flats at required spacing and frame all-round

square or round bars with round handed bolts and nuts or

by screws, including primer coat of approved quality and

two coats of oil painting etc. complete.

Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter

and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including thoroughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on ceiling and sloping

35 roofs to give an even shade including thoroughly brushing 76.00 88.47 Sqm

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint

on wall surface (two coats) to give an required shape even

shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials etc. complete

Providing and laying water proofing treatment on terrace

with broken China mosaic tiles flooring over average 40 mm

C.C. 1:2:4 bedding for maintaining slope for plain and curve

surface & 12 mm to 20 mm of broken piece of ceramic /

glazed tiles (one for more colour as directed) to be laid over

cement mortar bedding of C. M. 1:3 (1 cement : 3 sand)

37 contain one KG of water proofing materials per bag of OPC 100.00 1028.75 Sqm

at plain or / and slops and to be tempered to bring mortar

ceramic up to surface with using white cement and colour

pigment, including rounding of junctions and extending

them up to 15 cm along the wall and curing with bends any

patterns or design as per drawing and cleaning by using

oxalic acid etc. complete.

Providing and fixing water closet squatting pan (Indian type

W.C. pan) size 580 mm (Including 'P' or 'S' trap, foot rests

and excluding earthwork, bed concrete) Including providing

and fixing 100 mm size “P” or “S” trap for water closet

squatting pan including jointing the trap with the pan and

38 soil in cement mortar 1:1 (1 cement : 1 coarse sand) 2.00 1493.97 No

including P & F in cement mortar 1:3 (1 cement : 3 coarse

sand) A pair of white vitreous china 250 mm x 130 mm x

mm foot rest for long pattern squatting pan water closet,

including P & F G.I. inlet connection for flush pipe with W.C.

pan (A) Vitreous china - (i) Long pattern-white colour.

Providing and fixing Wash basin with single hole for pillar

tape with C.I. or M.S. brackets painted white including

cutting holes and making good the same but excluding

fittings. (A) vitreous china : (ii) Flat back wash basin 550 mm

39 x 400 mm size, (i) in white colour, including fixing 32 mm dia 2.00 2180.72 No

C.P. Brass waste pipe, 32 mm dia M. I. Fisher union, 15 mm

dia stop tap and 15 mm dia capstan head pillar tap, screw

down high pressure with screws shanks and back nuts &

inlet & outlet connections for wash basin etc. complete.

Providing erecting and fixing double coated ISI water tank

40 of required capacity each with all necessary fittings and 2000.00 3.95 Litre

connection etc. complete on terrace

Providing and fixing screw down bib taps of following

41 size.(B) Brass chromium plated screws down Bib Tap. (i) 6.00 186.83 No

Providing and fixing concealed Cock of premium make with

42 necessary other materials and piping connections etc. 2.00 808.00 No

complete as directed by Engineer-in-charge.

Providing and fixing Angle Cock of premium make with

43 necessary other materials and piping connections etc. 4.00 606.00 No

complete as directed by Engineer-in-charge.

Providing and fixing C.P. brass towel rail complete with C.P.

44 brass brackets fixed to wooden plugs with C.P. brass 2.00 616.42 No

screws.(B) 600mm x 20mm size.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

100 mm diameter with jali of the following nominal

45 diameter of self cleansing design with C.I scread down or 2.00 586.60 No

hinged grating including the cost of cutting and making good

Providing and fixing 600mm x 450mm bevelled edge mirror

of superior glass mounted on 6mm thick A.C. sheet or

plywood sheet and fixing to wooden plug with C.P. brass

screws and washers.

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions

total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed

concrete etc. complete.(ii) Inside dimensions 500mm x

mm and 450mm deep for pipe line with one or two inlets.

Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps.(B) 150mm x 100mm size P or R type

Providing and Fixing PVC Spigot and Socket Soil waste and

Ventilating Pipe of the following nominal size 75 mm dia.

Providing and Fixing P.V.C. Spigot and Socket Soil waste

50 and Ventilating Pipe of the following nominal size 110 mm 20.00 339.05 Rmt

Providing and fixing M.S. fan clamps type 1 of 16 mm. dia

M.S. bar bent to shape with hooked ends to R.C.C. slabs

during laying including painting the exposed portion of the

loops all as per standard design complete.

Providing laying and jointing in true line and level 15mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

52 wall with the help of clamp at every two metre C/C or shall 40.00 72.65 Rmt

be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

as approved by Engineer In Charge. Pipe shall be fixed on

53 the wall with the help of clamp at every two metre C/C or 30.00 91.84 Rmt

shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing Sock well of inside Dimension 3.00 mt. Deep &

2.00 mt. Dia. Incl. Excavation, honey comb masonary work

54 in C.M. 1:6 incl. Covering the top with slab and providing 2.00 43449.66 No

mainhole cover incl. Providing vatas and curing etc.

Constg Septic tank Including Excavation,B.B.C.C. 1:5:10,

with brick masonarry wall in C;M 1:6 finished with Cement

plaster in C;M; 1:3 incl. partition with half brick

masonary.Etc complete.

Bala concept drawings on walls as per the instruction of

Engineer in charge

Providing and fixing pre-cast Rubber Dye / steel Dye inter

locking concrete block 60mm thick with grade of concrete

M-300 pnumatic compressed / vibrated mechanically and as

57 per approved design Confirming to IS 15658 : 2006 including 24.54 699.84 Sqm

35 mm Sand layer for levelling and filling the joint with sand

in proper line and level as per guidlines of IRC : SP 63-2018

Supplying and fixing slide, seesaw and swing combo set as

per the instruction of Engineer in charge.

SUB ESTIMANT-2 (ELECTRIC WORK)

Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5

sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI

marked 1.1 kv grade FRLS PVC insulated multi strand

copper wires upto max length of 10 mt, in below type of

pipe erected with 6A Tissino Type ISI marked flush type

59. switch / bell push and accessories erected on Metal / 20.00 299.97 Point.

PVC/Wooden Box covered with 3 mm thick

PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary

Lamp holder/ceiling rose / H.D.Connector as directed.( c)

with oval conduit /PVC casing capping double lock type

erected flushed on wall/ceiling complete

Point wiring for independent PLUG with following size mains

earth wire of 1.5 sq.mm (green) both are of ISI marked

KV grade FRLS PVC insulated multi strand copper wires upto

10 mt length, in following below of pipe erected complete

with ISI marked 3 / 5 Pin socket and tissino type switch

erected with earth continuity connection erected on Metal

/ PVC/Wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic/Laminated sheet. ( h) with oval

conduit /PVC casing capping double lock type erected

concealed in wall/ceiling complete

providing and erecting Mains with ISI marked electrolyte

stranded copper conductor, Non PVC Zero Halogen free fire

retardant insulated copper conductor, insulated wire

(HRFR) conforms to IS-694, erected in existing pipe with

1.5sq. mm copper conductor of same specifications for

earth continuity of following size.. [i] 3 wire 1.5 sq.mm

Supplying & erecting earth pit of minimum bore dia.150mm

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having

80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge has

to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Providing & Erecting following Shockproof tissino type

accessories erected on 3 mm thick PC (Polycarbonate) sheet

in PVC/ Metal/Wooden Box. erected on wall/ ceiling. ((1)

One no Single pole 6 A Switch / Bell push

Providing & Erecting following Shockproof tissino type

accessories erected on 3 mm thick PC (Polycarbonate) sheet

in PVC/ Metal/Wooden Box. erected on wall/ ceiling. (3)

One no Single pole 16 A Switch

Providing & Erecting following Shockproof tissino type

accessories erected on 3 mm thick PC (Polycarbonate) sheet

65. in PVC/ Metal/Wooden Box. erected on wall/ ceiling. (14) 4.00 219.17 No's

Electronic Hum free EME Socket Type Steps Fan Regulator

Providing & erecting Switch board for Computer or electric

apparatus consisting of following items in single board

erected on PVC / Metal/Wooden board concealed/open

with 3 mm thick PC (Polycarbonate) / Acrylic sheet erected

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories

Providing & erecting 240 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity (B) 40 Amp. Cat.III

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (A) single phase

incoming and horizontal single phase outgoing (a) single

door (IP-30) (iii)8 way

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon

filter suitable buster DC pump capacity 80 psi, mention with

40 psi inline type post carbon filter auto low & high pressure

switches with following size of storage tank & LPH capacity

& erected as directed [B] 25 Ltr / Hr with 30 Ltr. Storage

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (v) 36-40 Watts, Surge-

2 KV, IP-20, conventional 4 feet Cat-lll

Supplying and erecting led lamps with following wattage

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp

(v) 21 to 30 watts Cat-III

Providing and erecting Approved make Ceiling fan with

double ball bearing ISI mark with condenser A.C. 23OV.50

72. c/s.1200 mm. sweep complete, canopy erected on existing 6.00 1,596.81 No's

hook or clamp with earthing. [Make shall be approved by

Engineer in charge]

providing and erecting Approved make RCCBs conforming to

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on

single phase 240 V,50Hz. having characteristic of quick

action & tripping with all advance feature & do not

incorporate any electronic component. for following Max.

rating erected as directed (ii) 40Amps. DP Cat. II

Providing & erecting open well type horizontal mono block

pump set with stainless steel body having following

specification (A) 0.5 H.P. single phase open well motor

pump set having discharge of 115 LPM @ 15 mtr. head

suitable for 32 mm dia. delivery pipe with control panel Cat.

Supplying & Erecting floor mounted/ table top single phase

50Hz water dispenser with SS 304 food grade cold tank

specification having three water tap of hot/cold/ambient

75. water function, LED display with storage capacity from 2.5 2.00 11,557.43 No's

Ltrs to 3.2 Ltrs, cooling capacity 2.5ltrs/hr, including

refrigerant with 20ltrs refrigerant storage capacity

compartment inclusive 1No.water topping bottle

LED (Light Emitting Diode)1 Star LED (Light Emitting Diode)

Ultra HD (3840 x 2160) TV, 1 pieces , Total number of in-

built speaker(s) 2, ative Resolution of Display (Pixels) Ultra

HD (3840 x 2160), Diagonal Display Size (in inches)

Between 40 and 45 (101.6 and 114.3 cm) (L.G , Sumsung

Etc. Brand) as per the instruction of Engineer in charge.

SUB ESTIMANT-3 (FURNITURE WORK)

Providing and Fixing SS 304 Foldable Checking bed having

size 1.50 X 0.60 X 0.75 mm including using of 25mm dia

77. pipe, SS 2mm thick, matter of 25.4 (1") of 40 density, cover 2.00 7,474.00 No

with regine cloth of approved quality etc completed as

directed by Engineer incharge.

Providing and Placing IT wood writing table having size

X 0.75 X 0.75 mt with one side drawer with using of 19mm

78. thick WP wood, top cover with 1 mm thick wood type 2.00 14,776.30 No

Formica including using of all necessary material & labour

etc completed as directed by Engineer incharge

Providing and fixing Fabric cloth Curtain having length

mtr for covering of checking area including using of

alluminum sliding channel etc complete as directed by

Engineer incharge.

Providing and Fixing of SS 304 Hanger for bag including

80. using all necessary materials like SS rail, screw etc 60.00 353.50 No

completed as directed by Engineer Incharge.

Providing and Fixing pin cushion display board having size

1.20 X 0.75 mt including using of alluminum section frame,

18mm thick WB plywood, nevy blue Cushion cloth pin etc

completed as directed by Engineer Incharge.

Providing and fixing PVC modular kitchen cabinet consisting

of base and wall units, made from high quality rigid PVC

boards (minimum 15–18 mm thick), including shutters,

shelves, drawers, SS hinges, telescopic channels, handles,

magnetic locks, necessary fittings, cutting, fixing, complete

as per design and direction of Engineer-in-charge.

Providing and fixing foldable MS ladder having 0.90mt wide

& 3.60mt long including rod hinge arrangment at middle

with ladder including one coat of red oxide & two coats of

oil paint etc completed as directed by Engineer incharge.

Providing and fixing of hook of 10mm or 12mm dia including

drilling hole, fixing of male- female thrade fastner sealing

the same with appoxy compound, finishing the same etc

complete as directed by Engineer incharge.

Providing and fixing medical device & equipment standio

meter height measuring scale 2.10mt long including fixing in

wall with using of all heavy SS screw, rail etc complete as

directed by Engineer incharge.

Providing and supplying standard PVC (Polyvinyl chloride)

86. Chair with handle of approved design and make as directed 4.00 1,262.50 No

by Engineer incharge.

Providing and supplying standard PVC (Polyvinyl chloride)

87. Stool having size 3.75 X 0.60 X 0.45mtr of approved make as 4.00 1,060.50 No

directed by Engineer incharge.

Providing & fixing ABC type fire extinguisher 4 kg ISI marked

SUB ESTIMANT-4 (COMPOUND WALL)

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or

Providing and laying cement concrete 1:4:8 (1 cement :

coarse sand : 8 B.T. machine crushed stone aggregates

mm nominal size) and curing etc. complete excluding cost of

form work in foundation and plinth.

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

91 exceeding 20 cm. in depth consolidating each deposited 9.20 136.92 Cum

layer by ramming and watering.

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine

sand)(B) Conventional

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg/Sq.Cm. in

93 superstructure above plinth level upto floor two level in 20.00 4526.75 Cum

Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B)

Conventional brick etc. complete

Providing and laying cement concrete 1:3:6 (1- Cement : 3-

Coarse sand : 6- crushed stone aggregates 20 mm nominal

size) and curing complete including cost of formwork in (A)

Wall Caps / Coping

Providing TMT Bar FE 500D reinforcement for R.C.C. work

95 including bending, binding and placing in position complete 211.20 77.29 Kg

upto floor two level

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and

smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

including finishing with a floating coat of neat cement slurry

for Ground Floor

Providing and fixing M.S. plain Grills (Safety Grill) / Shutter

of required pattern to wooden frames of window / Door etc.

with M.S. flats at required spacing and frame all-round

square or round bars with round handed bolts and nuts or

by screws, including primer coat of approved quality and

two coats of oil painting etc. complete.

Finishing wall with weather proof exterior emulsion paint

on wall surface (two coats) to give an required shape even

shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials etc. complete

Total Amount (A+B+C+D )

Total Amount (A+B+C+D )

Total Amount (A+B+C+D )

Total Amount (A+B+C+D )

Estimated amount Estimated amount

Put to tender Rs …3097221.00 Put to tender Rs…3097221.00

Deduct .............% below Rs………… Add............% above Rs……………

Total Rs………… Total Rs……………

(*Please strike out whichever is not applicable).

Note : 1 All work shall be carried out as per Public Works Department Handbook and other

specifications of Division or as

Note : 2 All the columns is Schedule should be filled in ink and the total of the entries in the last

column should be struck by the

Note : 3 Rates quoted include clearance of site (prior commencement of work and at its close)

in all respects and hold good for

Note : 4 To be continued on additional sheets, if found necessary.

The Chief Officer

Himatnagar Nagarpalika