Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.4 LAccepted-AOC | L1 | Accepted-AOC OK-L1 | |
| 2 | L2₹39.2 L+₹1.8 L (4.91%)Rejected-AOC W 2 FLAT NO 2105 LODHA AMAR KOLSHET ROAD KOLSHET THANE W 400607 | THANE | THANE | MAHARASHTRA | 400607 | L2 | Rejected-AOC Reject because L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical Work Completion Certificate Not Submitted as per NIT hence disqualifide |
Tender Value
₹38.0 L
EMD Value
₹38,000
Closing Date
9 May 2025, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE Mumbai, MIDC HQ
Superintending Engineer, MIDC HQ Andheri East 93
M and R to NRB at Wagle Estate Indl. Area .. Providing UPVC roof shed over Office Complex Building at Wagle Estate Thane.
2025_MIDC_1173062_1
MIDC_35806_UPVC Roof Shed
Open Tender
Supply, Erection and Commissioning
Item Rate
Thane Industrial Area
Please refer Tender documents.
2 documents required · 2 mandatory
₹10,030
₹38,000
14 Jun 2025
25 Apr 2025
15 May 2025
25 Apr 2025
9 May 2025
25 Apr 2025
25 Apr 2025 - 28 Apr 2025
Amount
Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.
Removing cement plaster of any finish from the wall, complete with racking out the joints to a depth of 20 mm.
Providing and applying 20 mm thick internal sand faced cement plaster at all heights and locations in cement mortar specified below in two coats for masonry (except stone masonry) and concrete surfaces including racking out joints, hacking of concrete surface, watering, finishing, curing, scaffolding etc complete as directed By Engineer In Charge In cement mortar 1:2
Providing and fixing G.I. anchor fastener in concrete surface for holding the concrete block. Item includes 12mm dia fastener stud with pinning etc. complete. Item will be executed as per instruction and directions of Engineer -In- charge.
Providing and applying one pack bonding coat between concrete members like RCC slabs, columns, beams, chajjas, pardis etc and cement mortar plaster using Hack Aid Plast of approved make & approved by Engineer in charge. Clean the concrete surface thoroughly to remove dust, dirt, grime, deshuttering oils and rub down to a clean surface. Apply Hack Aid Plast of approved make & approved by Engineer in charge by spray on the entire concrete surface. Provide a lean cement - sand dash coat over the same. Allow the dash coat to set for around 24 hours. Further plastering as per specifications can continue.
Providing and fixing anchor bolts in concrete Bolck for holding the base plate
Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
Providing and erecting structural steel for sakav with all bracing gusset plates etc. as per detailed design and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/welded connection and oil painting with 2 coats of approved quality and shade etc. complete. complete.
Providing and fixing hexagonal nut bolts of 4'' long for fixing the double top plate of post. Item will be executed as per instruction and directions of Engineer -In- charge.
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.
Providing and fixing UPVC Roof made up of 3 layers roofing material of thickness 2mm having width of 1130 mm and of required Length having Tensile strength not less than 330 Kilogram/cm2, including fastening with self drilling screw having washers made of stainless steel etc. complete.
Providing and fixing PVC coloured Ridge tiles over UPVC roofing where required having size 113cm x 41cm for ridge including fastening with self drilling screw having washers made of stainless steel etc. complete.
Galvanised iron sheet 1 mm (20 B.W.G.) eaves precoated gutter 200 mm to 230 mm wide and 100 mm to 125 mm deep moulded or half round girth upto 600mm including iron rods, on the edges (throughout the length) and galvanised iron sheet ferrules with fixtures, for outlets wherever required clamped using W.I. clamp 38 mm x 3 mm fixed 1.0 m C/C including making necessary connections with rain water pipes etc complete and as directed.
Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and Nos. ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.
Truck 5.5 cum per 10 MT
Soham Construction (BID ID -6641361)
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .