PROVISION OF BALANCE PORTION OF COMPOUND WALL AND GATE FOR 500 MTRS BAFFLE RANGE AT RAMGARH CANTT UNDER GE RAMGARH

Amount

M&L for Plain Cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundations,filling and mass complete all as specified and directed.

M&L for Brick work with Fly Ash Brick straight or curved on plan exceeeding 6 meter mean radius,built in cement mortar 1:4, complete all as specified and directed.

M&L for 10 mm thick rendering in CM 1:6 on concrete / fair face of brick work, with surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:6 on concrete / other than fair face of brick work, with surface finished even and smooth without using extra cement, complete all as specified and directed.

Use & waste of form work to sides and soffits of beams, lintel beams and roof beams and similar work for flat rough finished surface of concrete, complete all as specified and directed.

Use & waste of form work to sides of pillars, posts, columns and similar work for flat rough finished surface of concrete, complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel TMT bars 5 mm dia and upto 10mm , cut to length, bent to shape required, including cranking, bending spirally as in stirrups for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed..

M&L for Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exceeding 100 sq. cm but not exceeding 250 sqcm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed including necessary form work for fair faces of concrete, including inserting MS hook/lugs in position in concrerete while casting, placing in position, complete all as specified and directed.

M&L for Reinforced cement concrete M-25 (design mix) as in columns, pilars, piers, posts and struts etc complete all as specified and directed.

M&L for Reinforced cement concrete M-25 (design mix) as in beams, cantilevers, lintets over 1.5 m span etc complete all as specified and directed.

M&L for preparation of newly plastered / concrete surfaces of wall and apply two coats of cement base paint over a coat of primer complete all as specified and directed

M&L for preparation of newly or previously untreated surfaces of steel exceeding 10 cm width / girth and applysynthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, complete all as specified and directed.

M&L for Surface dressing not exceeding 15 cm deep in soft/loose soil complete all as specified and directed.

Excavation, in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out, complete all as specified and as directed.

Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed. complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed .

Material and Labour for plain cement concrete 1:4:8 type D-2 (40mm graded stone aggregate ) as in foundations, filling and mass concrete complete all as specified and directed

Use & waste of form work to sides of concrete foundations,footings,bases of columns,pillars, posts, columns , raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter complete all as specified and directed.

M&L for Reinforced cement concrete M-25 (20mm graded aggregates) (design mix) as in foundations,including rafts footing , foundation beams; plinth beams; bases for columns, etc, basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for Framed work as in hung gates,ornamental and itricate design,including pintle hinges, stops, hand made sliding bolt, etc with end of bars shouldered and /or riveted,or forged into spikes, framed guard bars,barred iron doors, ladders, framed balusters, walk ways,railings,framework of water tanks and similar work conforming to Fe-290-0Gde E-165 complete all as specified and directed.

M/s united construction co.

SHARDA CONSTRUCTIONS

M/S KAMLESHWAR SINGH

M/s Ray construction

simplex infra project