WD no.12 v 21 ke madhya me transformer se niranjan ke makan tak pitch roadka nirman

e\w excavion in foundation in ordanary soil distance all compt work.

Concrete with 4 cm guage approved stone ballast approved coarse sand and cement in the proportion of 8:4:1 including supply of all materials labour and tools and plants etc .required for proper completion for the work.

First Class brick work in 1:4Cement and coarse sand mortar in super structure including necessary cutting and moulding of bricks as required and also including supply of materials, labour, T&P etc. required for proper completion of the work thickness of wall not be less than one brick.

12 mm thick plaster with cement and coarse sand with all complete

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

Providing ,Laying ,spreading and compacting stone aggregates of 53-22.4 mm size to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber ,applying and brooming ,Stone screening to fill up the nterstices of coarse aggregate ,watering and compacting to the required density

Plain cement concrete 1:2:4 in substructure complete as per drawing and technical specification

Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means.

Providing and applying tack coat with bitumen using pressure distributor at the rate of 0.30 kg per sqm on the prepared non bituminous surface cleaned with hydraulic broom as per mechanical specification clause 503.

Providing, Laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 11.2 mm aggregates either using penetration grade bitumen or emuslion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 KN static roller capacity, finished to required level and grades to be followed by seal coat of Type 'C' as per Tehnical Specification Clause 508

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels , grade and cross fall using Type'C' as per Technical Specification Clause 510

Reinforced cement concerte 1:2:4 with cement c/sand and stone grit with all complete

MS Iron Rcc work

Supply and fixing of granite stone with letter writing of boards in completed work one job

Addd 18 GST

Please Enable Macros to View BoQ information