GE/863/EWS-T-41 OF 2021-22

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good to disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down unserviceable submain wiring alongwith batten /PVC conduits etc and making good to disturbed surfaces of walls/floors and match the existing surface complete all as specified and directed.

Taking down unserviceable DBs alongwith MCBs and connections etc and making good to the disturbed surfaces of wall / floors to match the existing surface complete all as specified and directed.

Taking down carefully old MCB s/Isolators any type by unscrewing from board complete all as specified and directed.

Supplying and fixing in repair 1100 volts grade heavy duty service cable 6 Sqmm with PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm dia suspension wire, one twin core cable flat or circular complete all as specified and directed.

All as per item No 5 here in before but of size of cable 10 Sqmm.

M & L for point wiring using approved colour coding as per IS by using FRLS PVC insulated 1.5 Sqmm multistranded,1100 volt grade copper conductor cable unsheathed type, alongwith 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for continous earthing in & incl PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of 2 mm thick sheet metal terminal box with 3 mm thick hylam laminated sheet on top for fixing switches sockets etc.for one light point/ fan point controlled by one switch complete all as specified and directed.

All as per Srl item No 7 here-in-before but for one 3 pin socket outlet 5 Amp on the independent board with other switches with cables 1.5 Sqmm .

All as per Srl item No 7 here-in-before but for one 3 pin socket outlet 5 Amp on the same board with other switches with cables 1.5 Sqmm.

All as per Srl item No 7 here-in-before but for one 3 pin socket outlet 15 Amp, independent board with other switches with cable 2.5 Sqmm.

All as per Srl item No 7 here-in-before but for one one bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables1.5 sq.mm.

S & F of switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as per specified and directed.

S & F of socket outlet 3 pin 5 Amp 230 Volt flush type complete all as per specified and directed.

S & F of switch piano type 15 Amp, 230 Volt, flush button single pole one way complete all as per specified and directed.

S & F of socket outlet 3 pin 15 Amp 230 Volt flush type complete all as per specified and directed.

S & F in repair switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as per specified and directed.

S & F in repair socket outlet 3 pin 5 Amp 230 Volt flush type complete all as per specified and directed.

S & F in repair switch piano type 15 Amp, 230 Volt, flush button single pole one way complete all as per specified and directed.

S & F in repair socket outlet 3 pin 15 Amp 230 Volt flush type complete all as per specified and directed.

S & F in repair surface and wall mounted LED batten with polycarbonate housing and robust construction 20 watt system lumen 6000 K with intehrated electronic driver and LED rod connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F in repair surface and wall mounted LED batten with polycarbonate housing and robust construction 10 watt system lumen 6000 K with intehrated electronic driver and LED rod connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S & F in repair LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F in repair round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

All as per item No 24 here in before but 12 Watts.

S & F Bell push flush type 5/6 Amps complete all as per specified and directed.

S & F electric Buzzer ding dong AC 230 volt single pole complete all as specified and directed.

M & L Ceiling rose, 3 terminal PVC, isolated body complete all as specified and directed.

M & L for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S & F in repair Bell push flush type 5/6 Amps complete all as per specified and directed.

S & F in repair electric Buzzer ding dong AC 230 volt single pole complete all as specified and directed.

S & F in repair Ceiling rose, 3 terminal PVC, isolated body complete all as specified and directed.

S & F in repair Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S & F sheet metal enclosure double door for DBs single pole and neutral for 8 way 240 volt with 200 amps rated bus bar complete with bus and neutral link complete all as specified and directed.

S & F of sheet metal enclosure double door for DBs single pole and neutral for 4 way 240 volt with 200 amps rated bus bar complete with bus and neutral link complete all as specified and directed.

Supply and fixing 6 to 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB), Single pole in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

All as per item No. 36 here-in-before but of SPN and capacity 32 Amps

All as per item No 36 here in before but of SPN and capacity 40 to 63 Amps

M & L Sheet metal enclosure , Single pole and neutral , with two pin and earth plug and socket complete including one double pole MCB 20 Amp , 10 KA complete all as specified and directed.

M & L for submain wiring with PVC FRLS insulated single core multistranded copper conductor cable 1100 Volts grade, 6 Sqmm 2 runs and one run of PVC FRLS insulated single core multistranded copper conductor cable 1100 Volts grade 4 sqmm as earth wire drawn through & incl concealed PVC medium grade conduit of suitable size complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode of size 600mm x 600mm x 6mm thick buried directly in to the ground ( earth pit not less than 2.25 m deep below the ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to the galvanised earth lead by means of bolts , nuts check nuts and washers of galvanised iron or steel using GI wire 4.0 mm dia as earthing lead as shown in electric plate No -3 of SSR- Part-1 connected to earth test point all as specified or indicated including testing on completion and necessary excavation and earth work in hard/dense soil, returning filling, disposal of surplus soil, earth pit in PCC 1 :2:4 type B-1 using 20 mm graded stone aggregate, pit funnel, 20 mm diia medium grade GI watering pipe, 15 mm dia GI light grade earth lead protection pipe, CI frame and cover , wire copper lugs etc including mesh, charcoal and common salt in alternate layer incuding dismentaling of old/ unserviciabe earthing complete all as specified and directed.

M & L for taking down of ceiling fan 1200 mm sweep and opening the fan motor of dismantling old burnt winding and then rewinding with super enamaled copper winding wire of existing gauge and turns or as directed incl varnishing and drying and then assembling complete with replacement of unsv bearings and making electric connections including transportation to workshop and back to site complete all as specified and directed. Note : Old recovered U/S winding wire will be the property of the contractor.

Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed. NOTE: Ceiling fan shall be supplied under Schedule 'B' free for fixing.

M & L for rewinding of fresh air fan/exhaust fan, 380 to 400 mm sweep, metal body, 230 V AC single phase by taking out old unsv winding wire and rewinding with super enamelled copper winding wire of existing gauge and turns or as directed complete alongwith making electic connections and replacement of suitable capacitor including transportation to workshop and back to site complete all as specified and directed. Note : Old recovered U/S winding wire will be the property of the contractor.

M & L for rewinding of fresh air fan/exhaust fan up to 300 mm sweep, metal body, 230 V AC single phase by taking out old unsv winding wire and rewinding with super enamelled copper winding wire of existing gauge and turns or as directed complete alongwith making electic connections and replacement of suitable capacitor including transportation to workshop and back to site complete all as specified and directed. Note : Old recovered U/S winding wire will be the property of the contractor.

Fixing only exhaust fan (M.D. supply) and connecting up including provision of cable from ceiling rose/connector to fan complete all as specified and directed. NOTE: Exhaust fan shall be supplied under Schedule 'B' free for fixing

S & F in repair LED Lamp 7 Watt system lumen with all accessories complete all as specified and directed.

S & F in repair LED Lamp 9 Watt system lumen with all accessories complete all as specified and directed.

S & F in repair LED Lamp 12 Watt system lumen with all accessories complete all as specified and directed.

S & F in replacement heating element, triangular type, 1500 watt suitable for 25 ltr capacity geyser complete all as specified and directed. NOTE: Sample shall be checked at site before procurement to match with the existing type/model.

S&F in replacement thermostat 7"/11" suitable for storage type 25/50 ltrs capacity geyser complete all as specified and directed. NOTE: Sample shall be checked at site before procurement to match with the existing type/model.

S&F in repair FRLS,PVC insulated, PVC sheathed 3 core, 4.00 sqmm copper conductor flexible sheathed cable suitable for gyser of any type and capacity complete all as specified and directed.

S & F in replacement of Indicating lamp red/ green colour suitable for gyser of any type and capacity, round/ rectangular shape complete all as specified and directed.

S&F in replacement PVC connection pipe, 15 mm , 450 mm long with CP nuts and washers suitable for hot water for geyser complete all as specified

S&F in replacement Air termination, single pointed, copper rod 12mm dia and 300mm long complete with insulation block complete all as specified and directed.

S&F in replacement Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed.

S&F in replacement Aluminium strip 25 x 3.15 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed.

S&F in replacement exhaust fan, steel body, heavy duty, AC, single Phase, 230V of size 300 mm sweep with, blades, and frame and louvers incl all required fixtures complete all as specified and directed. NOTE: Old/ unserviciable exhaust fan shall be deposit in MES store yard by the contractor and taken on charge by the deptt.

Associated Engineers

GULATI BUILDERS

Bihar traders