Rest room and toilet for contract workers at phosphate plant in FACT Udyogamandal

Rest room and toilet for contract workers at phosphate plant in FACT Udyogamandal.

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead upto 50m in all classes of soil

Dismantling and removing the existing CC/RCC works and conveying and depositing the debris at places pointed out within a distance of 150M as directed by Engineer-in-charge

Earth work excavation in all classes of soil except hard rock requiring blasting for foundation trenches, drains, column footings, equipment foundations etc. not exceeding 1.5m in width or 10sq.m on plan.in all classes of soil except hard rock requiring blasting including filling in basement and sides of foundation with the spoil earth in layers,breaking clods, watering, ramming and consolidating and conveying and depositing the excess spoil or filling in low lying area and levelling within an initial lead of 50M and lift upto 1.5M, etc.complete .

Cement concrete work in 1:4:8 mix using first class 40mm nominal size hard granite broken stones including all charges for mixing concrete, laying, consolidating, curing etc. complete foundation/levelling course, flooring etc complete but excluding cost of form work.

Random rubble masonry in cement mortar 1:5 for foundation and basement.

Supply of Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete at all levels. With Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing form work to RCC works with necessary wooden planks, joists, runners, struts, posts etc. including removal after completion/ curing for slabs including sloping ones with connected curbs, if any and stair cases coming upto 5m height from plinth level or floor level in ground floor- straight sided.

RCC work 1:1 1/2:3 nominal mix using first class 20mm and down grade hard granite broken stones including all charges for mixing, laying, consolidating, curing, handling and fixing in position, etc. complete but excluding cost of formwork and reinforcement for foundation footing, bottom and sides of trench, raft, plinth beams and pedestal over foundation footing of all shapes pile caps and mass concrete

Cement concrete work in 1:2:4 mix with 66.67% 40mm broken stone and 33.33% 20mm broken stone for concreting road ways excluding cost of formwork.

Solid concrete block masonry in cement mortar 1:5 using good quality cement concrete blocks approved by the Engineer-in-charge for superstructure in ground floor/ upto 5m height from plinth level/floor level

Plastering with cement mortar 1:4, 12mm thick, one coat floated hard and trowelled smooth at all levels.

Supplying and fixing roof and side cladding with non-asbestos high impact coloured Polypropylene reinforced cement corrugated sheets (as per IS: 14871) 6 mm thick having suitable pitch including cutting to size and shape wherever required and fixing to existing structures with SS 304 bolts & nuts 8mm dia. and washers including applying a seal coat at the top projecting portion of the bolts with roofing compound etc. complete at all heights. Overlap of sheets with adequate sealing arrangements as per manufacturer’s specifications. (Laid area will be measured for payment purposes)

Cement plastering with CM 1:4,12 mm thick and a neat cement flushing coat of cement and red oxide powder (red oxide@ 3.50 kg/50 kg of cement) for finishing smooth the concrete floor & trowelled smooth at all levels.

Providing and laying antiskid vitrified floor tiles in Size of Tile 300x300 mm (min 8mm thickness) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing and fixing Ist quality vitrified wall tiles conforming to IS: 15622 (min 8mm thickness), of approved make, in all colours, shades of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete.

Supplying and fixing PVC door with shutter consisting of shutter frame made of extruded plastic section having dimension of 48 X 24 mm panelling with multi chambered hollow plastic section of 200 X 20 mm with an average wall thickness of 1 mm jointed with one another by tongue and groove joints and outer frame of door made of extruded plastic section of 68 X 60mm or nearest on all sides including supplying and fixing all required fittings such as anodised aluminium butt hinges, tower bolts, handles with screws, MS hold fasts for fixing door frames etc. complete as per manufactures specification

Supplying, laying, jointing & hydrostatically testing ISI marked PVC pipes conforming to IS 4985 and all required PVC specials such as tees, bends, elbows, unions, reducers, adapters, coupling etc., as per IS 7834 or IS 10124 as the case may be, including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers, ferrule, pipe supports, etc., hire of tools and plant, cost and conveyance of water for testing etc. complete so as to withstand the internal design pressure of 10 kg/cm2 -For external lines-25 mm or nearest OD

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. with 25 mm nominal outer dia Pipes

Supplying and fixing P.V.C. pipes conforming to IS 4985 class II-4kg/sq.cm pressure for waste water lines with all required specials such as plain bends, single junctions, elbows, unions, etc. including cutting masonry or concrete floors, etc. wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with clamps screwed in to masonry wherever required etc. complete-63mm or nearest outer dia.

Supplying and fixing white glazed Orissa pattern W.C pan (HINDUSTAN or equivalent) of size 530x410mm with P/S trap including embedding the closet and trap in cement concrete, giving connection to the sewer line with all necessary specials, cutting and making good the walls and floors wherever required etc. complete as per direction at site.

Supplying and fixing white glazed vitreous china flat back lipped front urinal of size 430x380x230mm or nearest size (Indian make best quality) with 1NO. 15mm pvc heavy type connection with CP learning nut and 1No. 15mm CP regulating valve (Jauger or equivalent) of superior make, CP spreader with flush pipe, fixing the urinal to wall with necessary wooden plugs & iron screws including cutting and making good the walls etc. complete.

Providing and fixing 10 litre capacity white P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 - 15mm nominal bore

Providing and fixing at all levels Health faucet with wall hook and 1.5m SS braided rubber hose pipe of product code of Hindware (product: F160023) or equivalent model from Cera, Parryware and angle stop cock of grohe (code : 2201600M flow rate≤ 5 litres per minute) including fitting, cutting and making good the walls etc. complete.

Supplying and fixing PVC pipes conforming to IS 4985-2000 class II - 4kg/cm2 for soil waste and rain water lines with all required specials such as plain bends, single junctions,elbows, crosses, unions, shoes, door bends, double junctions, vent cowls etc. with or without door including cutting masonry or concrete floors , sunshades etc wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with MS fixing clamps screwed on to wooden plugs embedded in masonry wherever required and painting the clamps with two coats of enamel paint over one coat primer etc. complete - 110mm or nearest OD .

Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour:-One coat

Cleaning and applying priming coats with water thinnable cement primer of approved brand and manufacture, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre on all surface.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour,One coat - of exterior grade.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.One coat.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. up to 5Km distance

KENZ Constructions

KK CONSTRUCTIONS