Construction of various Development works under Dhamnagar College, Dhamnagar, Bhadrak, Odisha

Sl. No. Description of Item Schedule Amount Non-Schedule Amount Total Amount

Sl. No. Description of Item Schedule Amount Non-Schedule Amount Total Amount

III Internal Electrical Works 6,85,982.38 3,20,484.46 10,06,466.84

IV External Electrical Work 5,33,165.30 27,84,702.06 33,17,867.36

Digitally signed by JAYA

Construction of various Development works under Dhamnagar College, Dhamnagar, Bhadrak, Odisha

*Rates including taxes

Head Schedule Schedule Non-Schedule

. 32670202.57 Unit Qty. Schedule

Sl. Rate Amount Amount

Civil Works 0.00 0.00

Cleaning & grubbing road land including uprooting rankvegetation,

grass ,bushes, shurbes, sapling and trees girth upto 300mm, removal

of stumps of trees cut earier and disposal of unsevicable materials and

1 1 stacking of servicable materials to be used or auctioned up to lead of Sqm 1860.190 9.74 18108.95 0.00

1000 meters including removal and disposal of top organic soil not

exceeding 150mm thickness.

Earth work in excavation of foundation in HARD soil within 50m lead

1 2 and 1.5m lift including rough dressing and breaking clods to maximum 0.00

5cm. To 7cm. And laying in layers not exceeding 0.3m in depth and as

per specification complete.

Filling in foundation, trenches and plinth with river sand, well watered

and compacted in layers of 1.8 mtr, with top surface dressed and

4 3 leveled to proper gradient including cost of all materials, conveyance, Cum 1001.123 1101.72 1102955.84

all taxes and royalties, loading and unloading, including cost of all

labour, sundries, T & P etc. All complete as per directions of the

Engineer -in-charge.

Filling available excavated earth (excluding rock) in trenches plinth

sides of foundation etc. in layers not exceeding 20 cm in depth ,

5 4 consolidating each deposited layers by ramming and watering, lead up Cum 251.690 177.59 44697.63

to 50m and lift up to 1.5 mt etc. including cost of all labour, sundries T

& P etc complete in all respect as per the direction of Engineer-In-

Construction of granular sub-base by providing Close graded Granular

subbase Grading-VI material as per table 400-1, spreading in uniform

layers with motor grader on prepared surface, mixing by mix in place

6 5 method with rotavator at OMC, and compacting with vibratory roller to

achieve the desired density complete as per Clause 401 of MoRT&H

Specifications for Road & Bridge works (4th Revision)

Cement concrete of proportion (1:4:8) in foundation and floors using

4cm size clean hard black crusher broken granite stone metal of

approved quality and from approved quarry including hoisting, lowering

and laying concrete in layers not exceeding 15 cm. (6") thick to the

8 6 required level ramming, watering, curing etc. complete including cost, Cum 97.418 7998.96 779240.24

conveyance, royalties of all materials with all labour and T&P required

for the work etc. complete in all respect and as per the direction of the

Engineer-in-charge.

Providing and laying plain cement concrete of proportion (1:3:6) in

foundation and floors using 4 cm. size black hard crusher broken

granite stone metal and screened and washed sharp sand for mortar of

approved quality and from approved quarry including hoisting,

9 7 lowering, laying concrete, ramming, watering and curing etc. complete Cum 22.85 8628.21 197115.71

to required levels laid in layers not exceeding 15 cm. thick in each layer

including cost, conveyance, royalties of all materials and cost of all

labours,labour cess, T&P etc complete as per the direction of the

Engineer-in-charge.

Providing & applying of pre constructional anti-termite treatment

Confirming to IS 6313 (Part-II) and creating chemical barrier under

and around the column pits, wall trenches, basement excavation top

surface of plinth filling, junction of wall and floors along with external

perimeters of building, expansion joints, surrounding the pipes and

conducts etc. at the rate at 7 ,5 liter per sqm on vertical surface and

10 8 5.0 liter per sqm on horizontal surface. Chemicals:- Imidachloprid 30.5 Cum 424.300 94.40 40053.92

SC , Doses: - 2.1 ml per lit of water cost of all materials,

labour,conveyance, T&P , all taxes and hire charges of machinaries as

per direction of Engineer-incharge. (Make :- HI-Solution or Smart Care

Pest Control or Bharat Pest Eradicators)

Fly Ash brick masonry in cement mortar (1:6) in Substructure using

Fly Ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having a crushing

strength of not less than 75 kg./sqcm with dimensional tolerance ± 2%

including splays cutting circular moulding chamfering and corbelling

11 9 and similar such type of works with all necessary projections watering cum 129.87 6773.47 879692.34 0.00

and curing after immersing the bricks in water at least for six hours

before use including cost, conveyance, royalties and taxes of all

materials with all labour,labour cess and T & P required for the work

complete in all respect as per direction of Engineer-in-Charge.

Fly Ash brick masonry in cement mortar (1:6) in super structure

using Fly Ash bricks of 23 Cm. x 11 Cm. x 8 Cm size having a crushing

strength of not less than 75 kg./sqcm with dimensional tolerance ± 2%

including splays cutting circular moulding chamfering and corbelling

and similar such type of works with all necessary projections watering

12 10 and curing after immersing the bricks in water at least for six hours 0.00

before use including cost, conveyance, royalties and taxes of all

materials with all labour,labour cess and T & P required for the work

complete in all respect as per direction of Engineer-in-Charge.

Providing Fly ash bricks masonry work using 23 Cm. x 11 Cm. x 8 Cm

having crushing strength not less than 75Kg/Sqcm in cement

mortar (1:4). Immersing the bricks in water before use in all necessary

14 11 projection splays cutting, circular moulding, corbelling etc. Including 0.00 0.00

cost of conveyance ,taxes & royalties, loading and unloading of all

materials & cost of all labour, scaffolding ,watering & curing ,sundries,

T & P etc. complete as per the direction of Engineer-in-charge .

Head Schedule Schedule Non-Schedule

. 32670202.57 Unit Qty. Schedule

Sl. Rate Amount Amount

Providing, lifting, hoisting and laying Reinforced cement concrete of

M-25 grade as per approved designs and drawings having a minimum

compressive strength (in work test) 250 Kg. / Square cm. in 15 cm.

cubes at 28 days after mixing and test conducted in accordance with

I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken

granite stone chips and screened and washed sharp sand for mortar of

approved quality from approved quarry, washed and cleaned ( 20mm.

size chips not to exceeds 25 %) to be mixed in concrete mixture with

Portland slag cement (PSC) including hoisting, lowering, laying and

compaction concrete by using vibrators, watering and curing for 28

16 12 days, centering and shuttering then after dismantling and removing 0.00

debris from the work site and finishing the exposed.surface smooth

providing grooves or beads wherever necessary including cost,

conveyance, loading, unloading, royalties and taxes of all materials and

cost of all labours, sundries, T & P required of the work etc.complete in

all respect as directed by the Engineer-in-Charge. But excluding cost

and conveyance of M.S. rods or Tor steel and binding wires and labour

charges for straightening, cutting, bending etc. of M.S. rods or tor steel

tying the grills and placing in proper position.

17 12.A Foundation and plinth

19 Column (Below Plinth) cum 11.27 20951.64 236166.92 0.00

22 12.B Ground Floor 0.00 0.00

Providing, lifting, hoisting and laying Reinforced cement concrete of M-

20 grade as per approved designs and drawings having a minimum

compressive strength (in work test) 250 Kg. / Square cm. in 15 cm.

cubes at 28 days after mixing and test conducted in accordance with

I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken

granite stone chips and screened and washed sharp sand for mortar of

approved quality from approved quarry, washed and cleaned ( 20mm.

size chips not to exceeds 25 %) to be mixed in concrete mixture with

Portland slag cement (PSC) including hoisting, lowering, laying and

compaction concrete by using vibrators, watering and curing for 28

28 13 days, centering and shuttering then after dismantling and removing 0.00 0.00

debris from the work site and finishing the exposed surface smooth

providing grooves or beads wherever necessary including cost,

conveyance, loading, unloading, royalties and taxes of all materials and

cost of all labours, sundries, T & P required of the work etc.complete in

all respect as directed by the Engineer-in-Charge. But excluding cost

and conveyance of M.S. rods or Tor steel and binding wires and labour

charges for straightening, cutting, bending etc. of M.S. rods or tor steel

tying the grills and placing in proper position.

29 Boundary wall 0.00 0.00

30 Foundation and plinth Cum 10.13 9544.73 96640.34 0.00

33 Ground Floor 0.00 0.00

Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel

of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL

/ SHYAM STEEL (grade Fe-500D) etc. including bending, binding,

welding and jointing if necessary and tying the grills and placing in

position as required for R.C.C. Work and for providing fan hooks as

required, hoisting, lowering, laying including cost, conveyances, taxes

36 14 of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour

required for the work for bending, binding and tying the grills in all

floors with labour cess etc. (payment will be made on standard weight

of B.I.S. for M.S. Rods or tor steel only) etc. complete as per

specification & direction of Engineer-in-charge.

37 Boundary wall

38 Foundation and plinth qtl 152.50 10456.88 1594673.71 0.00

Providing 16 mm thick cement plaster with cement mortar of mix (1:6)

with screened and washed sharp sand for mortar and finished smooth

to the rough surface of walls in all heights after racking out joints

including watering and curing, rounding of corners, providing grooves

40 15 where ever necessary with cost, conveyance, royalties of all materials

with cost of all labour,labour cess, T&P, and scaffolding required for the

work etc. complete in all respect as directed by the Engineer in charge.

Providing 12 mm thick cement plaster with cement mortar of mix (1:6)

with screened and washed sharp sand for mortar and finished smooth

to the rough surface of walls in all heights after racking out joints

including watering and curing, rounding of corners, providing grooves

42 16 where ever necessary with cost, conveyance, royalties of all materials 0.00 0.00

with cost of all labour,labour cess, T&P, and scaffolding required for the

work etc. complete in all respect as directed by the Engineer in charge.

Head Schedule Schedule Non-Schedule

. 32670202.57 Unit Qty. Schedule

Sl. Rate Amount Amount

Providing 6 mm thick cement plaster with cement mortar of mix (1:4)

with screened and washed sharp sand for mortar and finished smooth

to R.C.C. work after closed deep chipping & slurry treatment including

44 17 watering and curing, rounding of corners, providing grooves where 0.00 0.00

ever necessary with cost, conveyance, royalties of all materials with

cost of all labour, T&P, and scaffolding required for the work etc.

complete in all respect as directed by the Engineer in charge.

Waterproofing application:- Providing and application of two

component polymer modified flexible cementitious waterproofing

coating at a thickness of 1.5 -2.5 mm The membrane should have

Elongation equal or more than: 30% , Crack Bridging ability : Up to 1

46 18 mm, Adhesive strength: 1.0 N/mm² @ 28d, Tensile elongation: 60% @ sqm 214.5600 548.23 0.00 117627.80

20°C, Shore A Hardness >85 (between 3 - 7 days) etc. as per direction

of E.I.C (For longer span, in terrace panel of 4m*4m should be done by

groove cutting, and filling with PU Sealant).

Providing 2.5cm thick Grading Concrete over roof slab with cement

concrete (1:2:2) using 6mm size black hard granite crusher broken

chips and screened & washed sharp sand for mortar and finished

47 19 smooth to the rough surface of slab including watering and curing with sqm 214.560 552.51 118546.85

cost, conveyance, royalties of all materials with cost of all labour,

labour cess and T&P required for the work etc. complete in all respect

as directed by the Engineer in charge.

Supplying, fitting & fixing of 8-10 mm thick & size of 300x300 mm

Industrial vertified floor tiles in floors of approved make laid on 20 mm

48 20 thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints

with slurry including cost of all materials, labour T&P etc required for

the work all complete as per direction of the Engineer-in-charge .

Providing full body matt finish vitrified tile flooring using vitrified tiles

having thickness of min 10mm conforming to IS 13755 of 1200x600

(shade to be decided as per Ama Hospital scheme) (homogeneous) of

premium quality (JOHNSON / SOMANY/ KAJARIA/ RAK) in floors, treads

on steps and landings on 20mm thick bed of cement mortar of mix

(1:4) laid in proper slope and gradient with screened and washed

sharp sand for mortar and fixing with neat white cement

50 21 slurry,grouting the joints with neat white cement slurry mixed with 0.00 0.00

required quantities of pigments of approved make to match the shades

of the vitrified tile if required , watering and curing for 21 days,

including cost, conveyance, loading, unloading, royalties and taxes of

all materials, cost of all labour,Labour cess , sundries, T&P required for

the work, complete in all respect as per specification and direction of

Engineer-in-charge.

Providing, fitting, fixing vitrified tiles of premium grade having

thickness 8mm to 10mm confirming to IS 13756 of size 600mm x

600mm Plain (Ivory) of approved make (JOHNSON/ SOMANY/

KAJARIA/ RAK) as directed by Engineer-in-charge in dados skirting and

52 22 risers of steps on 12mm thick cement plaster (1:3) jointed with neat 0.00 0.00

cement slurry mixed with pigment to match the shades of the tiles

including rubbing and polishing etc. complete with cost, conveyance,

royalties of all materials all labour, labour cess complete in all respects.

Fixing Granite Tiles of approved dimension area above 0.4 sqm (20mm

thick) in Dados, treads of steps and landing on 12mm thick cement

mortar (1:3) jointed with neat cement slurry mixed with pigment to

54 23 match the shades of the tiles including rubbing and polishing etc. 0.00 0.00

complete with cost, conveyance, royalties and taxes of all materials

complete in all respects as per direction of Engineer-in-Charge.

Fixing Granite Tiles of approved dimension area above 0.4 sqm (20mm

thick) in Dados, treads of steps and landing on 12mm thick cement

mortar (1:3) jointed with neat cement slurry mixed with pigment to

56 24 match the shades of the tiles including rubbing and polishing etc. 0.00 0.00

complete with cost, conveyance, royalties and taxes of all materials

complete in all respects as per direction of Engineer-in-Charge.

Supplying fitting, fixing ,ceramic glazed tiles 30cm x30 cm / 40cm x40

cm in floors of size of approved make with 20mm thick bed of cement

58 25 mortar (1:4) jointed with neat cement slury mixed with pigment to 0.00 0.00

match the shades of the tiles complete including cost of all

materials,Labour T&P etc required for the work .

Supplying & Fixing ceramic tiles in Dados, Skirting and risers of steps

on 12 mm thick cement plaster (1:3) Jointed with neat cement slury

60 26 mixed with pigments to match the shade of the tiles including rubbing 0.00 0.00

and polishing including cost of all meterials etc. complete.

Head Schedule Schedule Non-Schedule

. 32670202.57 Unit Qty. Schedule

Sl. Rate Amount Amount

Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC)

(FENESTA/NCL VEKA LTD.) Casenent Door-60-Series duly

manufactured using UPVC reinforced profiles of 60mm x 55mm x

2.5mm for outer frames 102mm x 60mm x 2.5mm casement Door

Sash profile and 74mm x 60mm x 2.5mm mullion peofile capable of

mounting single glazing system, structurally reinforced with hot dip

galvanised up to 50 microns of minimum thickness of 2.0 mm

prefabricated & welded through fusion welding the door sash shall be

fitted with 12mm thick WPC Board of Greenply make duly fixed with

EPDM weathering seal resistant accessories like clipping locking system

made of aluminium 1 No. per set of sashes and th esystem isto be

installed at the site using anchor fasteners, silicon rubber sealant,easy

glazing/deglazing at site etc. including cost and conveyance of all

material, accessories, labour charges, materials and product

conforming to ASTM D 638-14,EN-447-95 and other applicable codes

and standards. (Ref.-Office of the Engineer-In-Chife (CIVIL), Odisha

Nirman Soudha,Bhubaneswar. Lt. No-16100)

Providing and fixing System Aluminum works for Sliding doors and

windows of TOSTEM make with 35mm visible aluminum section width

in the center mullion. The extruded aluminum sections should be made

from Grade 6063 & Anodized with Texguard coating , silicon coated to

suit marine atmosphere. All profiles should be None insulated Profiles.

Corner connection will be Butt joint with Screw using Nano gaskets for

sealing. All other major Accessories should also be made by the same

manufacture. All Slider doors & windows will be center locking.

Integrated Anti-lift in slider panel, EPDM gaskets should be used in

slider windows & doors in all meeting points instead of Brush Pile. The

outer frame Depth will be 72mm. All materials which are used should

be corrosion-resistant so that they are good functioning in different

64 28 environments and that there are no negative influences either on the 0.00 0.00

aluminum or on the surface treatment.

The system should allow the application of glazing or panels with

thickness up to 8mm. The external perimeter of aluminium sections

should be Anodized with Texguard coating, the system should qualify

Airtightness 8 m3/h.m2 at 75Pa of pressure, Water tightness 150 Pa,

Wind load resistance 1200 Pa. System should have a 10-year warranty

on properties, functionality and design, within restrictions defined by

technical specifications of anodizing & 1-year warranty on wearing

parts only applies to normal and realistically foreseeable use. All Slider

doors & windows will be center locking .

Providing & Fixinng factory made 100% Solid WPC ( Wood Polymer

Composite )- Door Frame 125 mm x 65 mm Single Rebated, made

from Wood Polymer Composite (Single Extruded Process ) material

comparising of virgin PVC polymer of K Value 57-60 ( Suspension

Grade ), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice

Husk/ Wheat Husk ) and Non toxic additives fabricated with meter

Joints after applying PVC solvent Cement & screwed with full body

treaded star headed screws having minimum frame density of 780 kg/

cbm & an ISO 9001 - 2015 Certified Company, having good screw

holding capacity ( Screw.Withdrawal strength of ( Min. 990 N

),Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity

900N/mm2 and resistance to spread of flame of class A category with

property of being termite / borer proof , water / Moisture Proof & Fire

retardant & Fixed in position with SS Dash Fasteners / Hold Fast of

reuired dia and lenght, , all as per specifications drawings as directed

by the Engineer-In-Charge. Material test certificate and authentication

should be compulsory provided by the manufacturing company.

68 Interior Door Hardware Each 6.00 814.20 0.00 4885.20

Factory made single leaf Solid WPC (Wood polymer) composite door

shutter of 25mm thickcompacted with wood grain finish structural

foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be

used as core material for fitting the metal fittings such as tower bolts,

aldrops, handles etc shall be provided. A structural adhesive

compatible with (EPS) foam shall be used for bending the core

material, The material and process for manufacturing the door

shutters shall conform to RV-TIFAC composites Design Centre's

standards and specifications and the door shutters Conforming to

relevant I.S.specification. The finish of door shutter will be plain colour

white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other

colour using high quality pigments. Three heavy whight mild steel butt

hinges type-I(ISI marked) size 100mm are to be fitted on one side of

Providing of 2 track 2 panel sliding Door Upvc Sliding Windows duly

74 31 made of Fenstech upvc FRAME section 62mm x 60mm and SHUTTER 0.00 0.00

section 45mm x 57mm,Solid & Inbuild gasket beading.

Providing of 3 track 3 panel sliding windows duly made of Fenstech

76 32 upvc Frame section 112mmX 57mm and SHUTTER section 45mm x 0.00 0.00

57mm, solid & Inbuild gasket beading.

Supplying and Fixing-Fixing of R.C.C. jally for toilet ventilation window

Head Schedule Schedule Non-Schedule

. 32670202.57 Unit Qty. Schedule

Sl. Rate Amount Amount

Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S.

gates, garage door, collapsible gates with top and bottom rails, steel

windows, critical frames for windows, stair case and parapet railing

made out of M.S Square bar/ flat including stair case hand railing with

80 34 40mm. dia G.I.pipe etc. including painting two coats over a coat of 0.00 0.00

redoxide primer as per approved drawing and design with cost of all

materials & labour, labour cess, T&P, sundries etc. complete in all

respect as per specification & direction of the Engineer-in-Charge.

Supplying & fitting fixing of precotated Galvanized iron profile sheet

semi gloss of 1000mm width & total coated thickness 0.45mm in roof

82 35 drilling holes in wind ties including fixing of ridges vallyes, wind ties 0.00 0.00

with all cost of I/L Hooks etc.complete as per direction Engineer-In-

84 36 Supplying of 50mm thick wall puf panels. 0.00 0.00

85 Cycle Stand & parking Sqm 1026.75 1681.50 0.00 1726480.26

Supplying and fixing of 80mm thick cement concrete interlocking

paver block of M-40 grade of approved make, design, colour and size

86 37 with proper compaction laid in required pattern etc. complete in all 0.00 0.00

respect conforming to IRC SP-63:2018..

87 Cycle Stand, parking stand & Paver road Sqm 7284.62 717.91 5229715.88 0.00

Supplying and fixing of Pre cast kerb stone of size 300mm x300mm x

150mm of M-30 grade of approved make, design, colour and size made

88 38 by Block making machine with proper compaction fixed in required Sqm 6894.00 191.82 1322412.60 0.00

pattern etc. complete in all respect conforming to IS 5758:1984

Supplying, fitting and fixing of Stainless steel of 304 grade in hand

railing using 50mm dia of 2mm thick circular pipe with Balustrade of

size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe

bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per

89 39 approved design and specification, buffing, polishing etc with cost, 0.00 0.00

conveyance, taxes of all materials, cost of all labour,labour cess, T&P

etc. required for the work complete in all respect as per direction of the

Engineer-in-charge.

Painting two coat with approved synthetic enamel paint to new iron

work over a coat of Red oxide primer including cost, conveyances,

91 40 royalties, taxes of all materials and cost of all labour with T&P required 0.00 0.00

for the work etc. complete as per specification & direction of Engineer

Wall painting two coats with Antifungal weather coat paint (1st quality)

exterior grade of approved make & approved shade over a coat of

primer to make an even finished surface in all floors and heights with

93 41 all scaffolding and staging charges including cost, conveyance, cost of 0.00 0.00

all labours, T & P, sundries etc. as required for the work complete in all

respect as per the direction of the Engineer-in-Charge.

Painting two coats with plastic emulsion paint with a approved quality

primer to make an even finished surface in all floors and heights to

wall surface of approved make and shade including sand papering,

95 42 applying putty wherever necessary & cost of scaffolding, staging 0.00 0.00

charges with cost, conveyance, cost of all labour,labour cess, T&P etc.

complete as per the direction of the Engineer-in-charge.

Priming one coat with wall cement primer (water bound) to make an

even finished surface in all floors and heights to wall surface of

approved make and shade including sand papering, applying putty

97 43 wherever necessary & cost of scaffolding, staging charges with cost, 0.00 0.00

conveyance, cost of all labour,labour cess T&P etc. complete as per the

direction of the Engineer-in-charge.

Finishing plastered surfaces of walls with cement based wall putty

(Water based) of approved make (JK White/ Birla white or equivalent

make duly approved by Engineer-in-Charge) and finishing the surface

99 44 smooth and even by sand papering to receive painting in walls, at all 0.00 0.00

heights with staging wherever necessary with cost, conveyance, cost of

all labour,labourcess, all T&P etc. required for the work complete in all

respect as per the direction of the Engineer-in-charge.

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to

60mm thickness of existing ground prepared with proper level and

ramming with tools wooden (Dhurmos) and than rolling the surface

101 45 with light roller make the surface smoothen and light waterning with Per Sqm 9585.197 292.87 2807215.30 0.00

sprinkler and maintenance for 30 days or more till the grass establish

properly, as per direction of officer-in-charge.(REF: Horticulture &

Landscaping DSR-2020 , Page no-91 , Seriel No-2.33).

Foxtail palm well developed with fresh & healthy foliage of ht. plant

210cm to 240cm in big 40cm Cement Pot

Providing and stacking of Lagerstroemia flosreginae of height 150-165

105 47 cm.in big poly bag of size 25 cm as per direction of the officer-in- Each 40.00 141.60 5664.00 0.00

Providing and stacking of Peltophorum species of height 150-165 cm.

107 48 in big poly bags of size 25 cm as per direction of the officer-in-charge. Each 40.00 70.80 2832.00 0.00

Providing and stacking of Plumeria acutifolia of height 120-135 cm.

109 49 with 2-3 branches in HDPE bag of size 30 cm as per direction of the 40.00 129.80 5192.00 0.00

officer-in-charge

Head Schedule Schedule Non-Schedule

. 32670202.57 Unit Qty. Schedule

Sl. Rate Amount Amount

Dianthus hybrid

118 Sub-Total of Civil Works 32670202.57 4913676.08

121 Plumbing Works

A- Internal Sanitary & Plumbing System

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes

conforming to IS:15778/ASTM Pipe, having thermal stability for hot &

cold water supply, including all CPVC plain & brass threaded fittings

122 1 including fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent cement and

testing of joints complete as per direction of Engineer-in-Charge

In ground floor

126 4 In First Floor 0.00 0.00

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR

soil waste ventilating pipes and fittings of the following outside

diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins

and wooden plugs or laying in trenches including jointing with supply of

129 5 approved rubber lubricant by non-heat application method/as per 0.00 0.00

manufacturer’s specification, testing, earthwork in excavation in all

kinds of soil and refilling of trenches as per specification and direction

of the Engineer in charge..

132 7 75mm PVC socket plain Each 12.00 95.93 1151.00 0.00

135 10 110mm PVC socket plain Each 9.00 188.92 1700.00 0.00

140 15 110mm PVC door cross Tee Each 8.00 650.42 5203.00 0.00

141 16 110mm dia U-PVC Offset without ear Each 10.00 480.73 4807.00 0.00

Supply,Providing, fixing, testing and commissioning in position UV

stabilised 75 mm dia UPVC Rain water pipe with Fittings (IS: 13592

145 19 Type - B). In case of ceiling hanging, the supply of Pipe Clamps Mtr 65.00 518.61 33710.00 0.00

(Chilly/MS angle) as per engineer in charge.110 mm diameter.

(IS:13592, Type -B).

Supply,Providing and fixing 150 mm x 150 mm.dia CI Grating for Rain

water pipes 110 mm dia.

Supplying all materials , labour, T&P and fixing Vitreous china water

closet ,squatting pan ( Indian type W.C. pan / Orissa pattern squatting

pan ) duly embedded in cement concrete 1:5:10 using hard granite

metal 4cm nominal size including fixing a pair of vitreous china

250mmx130mmx30mm foot rest, fixing 100mm dia hci 'P' or 'S' trap

149 21 for water closet squatting pan including jointing the trap with pan in Each 5.00 3072.96 15365.00 0.00

cement mortar (1:1), cutting the floor and mending good the damages

etc. all complete as per P.H. specification and direction of Engineer-in-

580mmx440mm size Orissa Pan

Matrix Set -1 (WB 65 x 35 with one pair mounting brackets, EWC &

151 22 Cistern complete with fittings & seat cover, one no hinged rail 76 cm Each 2.00 78575.49 157151.00 0.00

and five nos of grab rails 60 cm) (Hindware).

Supplying all materials, labour, T&P and fixing wash Kitchen sink/

Laboratory sink with outlet at end and weir overflow including fitting

and fixing a pair of cast iron or MS brackets painted white, fixing

50mm/40mm dia ss waste, fixing 50mm/40mm dia PVC waste pipe

153 23 910mm long with supply of wooden plugs, screws and cement etc Each 1.00 5975.28 5975.00 0.00

including cutting holes in walls and making good the damages etc all

complete as per specification and direction of the Engineer in charge.

600x450x250 mm stainless steel kitchen sink (Jayna make)

Supplying all materials,labour,T&P and Bowl pattern urinal of the

following sizes including connecting the urinal with 32mm dia PVC

waste pipe 910mm long by means of white lead mixed with chopped

155 24 hemp, fixing 32mm dia cp dome west,15mm dia cp spreader including Each 4.00 5381.15 21525.00 0.00

cutting holes in wall and making good the damages with supply of

wooden plugs,screws and cement etc. all complete as per specification

and direction of the Engineer-in-charge.

Head Schedule Schedule Non-Schedule

. 32670202.57 Unit Qty. Schedule

Sl. Rate Amount Amount

157 25 Cost of 15mm dia urinal spreader Each 4.00 338.19 1353.00 0.00

159 26 32mm dia CP dome waste Each 4.00 151.63 607.00 0.00

161 27 Pressmatic Stopcock Each 4.00 3107.06 12428.24 0.00

Supplying all materials ,labour ,T&P and fixing Wash basin with hole

for pillar taps with cast iron or MS brackets painted white including

cutting holes in walls and making good the damages with supply of

wooden plugs, screws and cement etc. fixing pedestral for wash basin

recessed at the back for the reception of pipes and fittings, fixing PVC

waste pipe of 32mm nominal diameter for wash basin including brass

163 28 check nut complete, fixing pillar taps capstan head screw down high 0.00 0.00

pressure lettered 'Hot' and 'Cold' with long screws, shanks and back

nuts of 15mm dia nominal bore, fixing15mm dia PVC inlet connection

pipe and making connection with pillar cocks and supply mains for

wash basin , fixing 12mm dia CP brass waste etc.all complete as per

specification and direction of Engineer-in-charge.

164 29 550mmx400mm size Under counter wash basin Each 6.00 4283.40 25700.00 0.00

166 30 32mm dia PVC waste pipe with brass coupling nut Each 6.00 59.59 358.00 0.00

168 31 15mm dia PVC inlet connection pipe 0.45m long Each 6.00 40.12 241.00 0.00

Supplying all materials, labour, T&P and fitting and fixing brass/CP

fittings of the following nominal bore with supply of all jointing

materials complete as per specification and direction of the Engineer in

172 33 15mm dia CP Long Body Bib cock Each 7.00 1916.44 13415.00 0.00

173 34 15mm dia CP Angle stop cock Each 20.00 1393.82 27876.00 0.00

174 35 15mm dia CP Pillar cock Each 6.00 2032.67 12196.00 0.00

176 37 15mm dia CP extension piece Each 14.00 69.97 980.00 0.00

177 38 15mm PVC Connection Pipe Each 10.00 40.12 401.00 0.00

178 39 32mm PVC Waste Discharge Pipe Each 14.00 59.59 834.00 0.00

Supplying all materials,labour,T&P and fixing standard sized Glass-shelf

with C.P brass bracket and guard rail complete fixed to wooden pluges

182 42 with screw etc.all complete as per specification and direction of Each 4.00 791.19 3165.00 0.00

Engineer-in-charge.

600mmx125mm size glass shelf with C.P ruard rail.

Supplying all materials ,labour ,T&P and fixing standard sized CP

brass towel rail / Towel ring complete with CP brass brackets fixed to

184 43 wooden plugs with chromium plated brass screws etc.all complete as Each 5.00 881.81 4409.00 0.00

per specification and direction of Engineer-in-charge .

25mmx600mm long CP Towel rail .

Supplying all materials ,labour ,T&P and fixing CP Soap Holder/ Soap

Dispenser complete with CP brass brackets fixed to wooden plugs with

187 45 chromium plated brass screws etc.all complete as per specification and Each 5.00 250.16 1251.00 0.00

direction of Engineer-in-charge .

189 46 CP soap dispenser Each 6.00 2584.32 15506.00 0.00

191 47 Toilet Roll Holder Each 20.00 677.32 13546.00 0.00

Supplying all materials ,labour ,T&P and fixing Mirror of superior glass

mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to

193 48 wooden plugs with chromium plated brass screws and washers etc.all Each 6.00 896.09 5377.00 0.00

complete as per specification and direction of Engineer-in-charge.

Mirror (Bevelled edge) 600mmx450mm

Supplying all materials, labour, T&P and fitting and fixing G.M/ Brass

fittings of the following nominal bore with supply of all jointing

195 49 materials complete as per specification and direction of the Engineer in Each 11.00 1113.21 12246.00 0.00

25mm dia Brass F.W valve

196 50 32mm dia Brass F.W valve Each 3.00 1630.41 4892.00 0.00

Supplying all materials, labour, T&P and providing fitting and fixing

Aquaguard PRO Thermapure 120 PSS RO ACH which gives you

Hot,Cold & Ambient purified water.Aquaguard PEO Thermapure 120

PSS RO has built-in-3 stage combinations,Tank Capacity 120Ltr.,Cold

Water-80 Ltrs,Hot water-20 Ltrs.,Ambient water-2- Ltrs.,Cooling

capacity-60 LPH,Refrigerant-HFC R134a,Cold water temperature-15

Deg.C+/-1*,Heating coil wattage-2000W,Hot water temperature-50

Deg C+/-1,Thermal insulation-PUF,No of Faucets-1 Hot,1 Cold,1

Ambient,Tank,front panel and drain tray MOC-SS304,Other body

panels-Powder coated CRCA Steel,No of filtration stages-7,RO Capacity-

50 LPH*,RORecovery%-50%*,TDS Reject-90%*, Dimentions

(WxDxH)cm-75x72x144,Net weight-92 Kg.etc.all complete as per

direction of the Engineer-in-charge.

Head Schedule Schedule Non-Schedule

. 32670202.57 Unit Qty. Schedule

Sl. Rate Amount Amount

Supplying all materials,labour,T&P and fixing Rotational moulded

polyethylene cylindrical vertical water storage tanks conforming to IS :

12701--1996 including cutting holes through the tank and fixing mild

steel tubes and fittings and providing extra sockets and jam nuts,

fixing ball valve etc, including hoisting upto a height of 5 metres above

ground level and placing the tank to the required position and providing

1st class K.B brickwork in cement mortar (1:6) of 0.46m height in

staging and in circular protection wall to support the tank, 12mm thick

200 52 cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m Each 2.00 48411.27 96823.00 0.00

and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average

length in cement concrete(1:2:4) using 12mm size h.g chips including

centering and shuttering, watering, curing, conveyance of all materials

to worksite etc all complete as per specification and direction of the

Engineer in charge.

Fixing 1500Ltr Roto-moulded water storage 3 layer tanks-In Terrace

floor ( For Girl's Hostel & Boy's Hostel)

Supplying all materials,labour,T&P and fixing Rotational moulded

polyethylene cylindrical vertical water storage tanks conforming to IS :

12701--1996 including cutting holes through the tank and fixing mild

steel tubes and fittings and providing extra sockets and jam nuts,

fixing ball valve etc, including hoisting upto a height of 5 metres above

ground level and placing the tank to the required position and providing

1st class K.B brickwork in cement mortar (1:6) of 0.46m height in

staging and in circular protection wall to support the tank, 12mm thick

202 53 cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m Each 1.00 27671.30 0.00 27672.00 0.00

and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average

length in cement concrete(1:2:4) using 12mm size h.g chips including

centering and shuttering, watering, curing, conveyance of all materials

to worksite etc all complete as per specification and direction of the

Engineer in charge.

Fixing 750Ltr Roto-moulded water storage 3 layer tanks-In Terrace

Supplying all materials, labour, T&P and cutting holes through existing

brick work including making good the damages in cement mortar (1:4)

203 53 for taking GI pipes and fittings/ PVC pipes and fittings etc all complete Each 30.00 73.75 2213.00 0.00

as per PH specification and direction of the Engineer in charge.

250mm thick wall in Ground floor

Supplying all materials, labour, T&P and cutting hole in R.C.C floors,

roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and

fittings etc and repairing the holes after insertion of pipes etc with

205 54 cement concrete (1:2:4 ) including finishing complete so as to make it Each 36.00 253.35 9121.00 0.00

leak proof as per direction of the Engineer in charge.

In Ground Floor

Supplying all materials, labour, T&P and cutting grooves in pucca

floors and walls for taking GI/ PVC pipes and making good the

207 55 damages as per the direction of the Engineer in charge. Mtr 85.00 274.47 23330.00 0.00

In Ground Floor

B- External Supply & Drainage portion

Supplying all materials ,labour ,T&P and constructing gully trap

chamber of inside size 250mmx250mm with 8cm thick RCC precast

cover slab in cement concrete (1:2:4) mix using 12mm size crusher

broken HG chips, foundation concrete (1:4:8) using 40mm size crusher

broken HG metal on bed and around trap, KB brick work in cement

mortar (1:6) in foundation and plinth and inside 12mm thick cement

plastering (1:3) finished with a floating coat of neat cement including

fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI

grating etc.all complete as per drawing, specification and direction of

Engineer-in-charge.

In side size 250mmx250mm

Supplying all materials ,labour ,T&P and constructing Inspection

Chamber of inside size 760mmx760mmx460mm with cement

concrete (1:3:6) using 40mm size crusher broken hard black granite

metal on bed , KB brick work in cement mortar (1:6) in foundation and

plinth, moulding and shaping the channel inside and benching with

cement concrete (1:2:4) using 12mm size crusher broken hard black

granite chips, 12mm thick cement plaster (1:3) with cement punning

to inside, cement flush pointing (1:3) to outside, R.C.C cover slab

(1:2:4) using 12mm size crusher broken hard black granite chips with

R.C.C man hole cover, earth work in excavation in all kinds of soil and

refilling the cavity around the chamber including watering,curing,cost

of all materials, conveyance of all materials to worksite, payment of

royalty,all taxes etc.all complete as per approved drawing, P.H

specification and direction of Engineer-in-charge .

Inside size : 760mmx760mmx460mm

Supplying all materials,labour,T&P and laying in trenches ( to level or

slope ) unplasticized PVC pipe conforming to IS:4985/2000 of the

following outside dia for class-3 (0.60mpa) including jointing with

supply of approved solvent cement by non-heat application method/ as

per manufactures's providing and laying in trench cement

213 58 concrete(1:4:8) with 40 mm size hard granite metal in the Type-C-1 Mtr 70.00 1670.29 116920.00 0.00

standard bedding surrounding or encasing including concrete for

bedding and curing etc all complete as per PH specification and

direction of the Engineer-in-charge.

110mm dia U-PVC pipe ( Allround concrete )

Head Schedule Schedule Non-Schedule

. 32670202.57 Unit Qty. Schedule

Sl. Rate Amount Amount

Supplying all materials, labour, T&P and constructing Circular Type

Man Hole Chamber of the following size with cement concrete

(1:4:8) using 40mm size hard granite metal on bed, 1st class Fly ash

brickwork in cement mortar (1:5), moulding and shaping the channel

inside and benching with cement concrete (1:2:4) using 12mm size h.g

chips, 12mmthick cement plaster (1:3) with punning to inside, 12mm

thick cement plaster (1:3) to outside, R.C.C cover slab in (1:2:4) using

12mm size h.g chips, earthwork in excavation in all kinds of soil and

refilling the cavity around the chamber including watering, curing,

conveyance of all materials to worksite, payment of royalty,taxes etc

all complete as per approved specification and direction of the Engineer

Circular MH inside dia 1200mmx1670mm with sides sloped

Providing and fixing in position Polyproplene Foot steps of required

shape and approved quality as per the direction of E.I.C.

Providing Lowering, Laying, Jointing and Testing Work of non-pressure

217 62 NP 3 class R.C.C. pipes with collars jointed with stiff mixture of cement 0.00 0.00

mortar in the proportion of 1:2 (1 cement : 2 fine sand) including

testing of joints:

Supplying all materials, labour, T&P and constructing soakway pit of

the following size with precast RCC rings joined loose, gravel backing in

the rear of well steining, precast RCC cover slab in cement concrete

(1:2:4) using 12mm size hg chips fitted with iron lifting handels

including cutting hole in the rings for inlet pipe, earthwork in open well

220 65 excavetion in all kinds of soil and refilling of cavity around the pit & Each 4.00 28242.59 112970.00 0.00

painting the iron works, waterig, curing, conveyance of all materials to

worksite, payment of royalty, taxes etc all complete specificatio and

direction of the Engineer in charge.

1.22m dia x 2.10m deep Soakway pit .

C- Sinking of 200mm x 150mm Large Tube well through DTH

Labour for drilling a perfectly vertical bore hole of specified dia for a

specified depth below ground level through consolidated and

unconsolidated rock with down the hole hammer drilling rig or

combination rig as required to suit the site condition as per the

direction of the Engineer in charge including use of own rig with its

accessories, tools and plant and consumables etc for lowering of

222 67 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with mtr 60.00 923.47 55408.00 0.00

socket and with or without well screen as per the necessity for soft,

medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if

required to prevent collapse of overburden is to be provided by the

contractor including lowering and withdrawing after completion of the

tube well), 200mm dia to 400mm dia in overburden portion including

packing of gravel supplied by the contractor for 400mm dia bore only .

Drilling of 200mm dia bore 0 to 30 mtr (2x30mtr)

223 68 Drilling of 200mm dia bore 31 to 45 mtr (2x15mtr) mtr 30.00 923.47 27704.00 0.00

224 69 Drilling of 150mm dia bore 45 to 100 mtr (2x55mtr) mtr 110.00 923.47 101581.00 0.00

Labour for lowering the following size of PVC casing pipes with or

without slotted pipes as per necessity from ground level upto 300 mtrs

depth and fitted and set up in perfectly vertical position including

cutting and threading of blank pipes and slotted pipes and supplyinging

225 70 and fixing of all jointing materials ,extra sockets and T&P etc. all mtr 60.00 212.99 12779.00 0.00

complete and keeping the top of casing pipe threaded including

plugging the tubewell to prevent entry of foreign materials.

Lowering of 200mm dia PVC casing pipes 0 mtr to 30 mtrs (2x30mtr)

Lowering of 200mm dia PVC casing pipes 31 mtr to 45 mtrs (2x15mtr)

227 72 Cost of 200mm dia PVC schedule - 80 pipe (2x46mtr) mtr 92.00 2095.21 192759.00 0.00

Cleaning and developing the tube well with supply of compressor

worked till clear and adequate discharge is obtained from the tube well

228 73 including supply and use of all necessary equipment and labour as per each 2.00 7771.48 15543.00 0.00

direction of the Engineer in charge .

Supplying all materials, labour, tools and plant and withdrawing casing

229 74 pipes from the unsuccessful bore and depositing in the departmental mtr 45.00 419.49 18877.00 0.00

store in good condition.

Labour for withdrawing of 200 mm dia PVC/GI Casing Pipe

Supplying all materials,labour,T&P and providing around sealing by

cement concrete grouting of annualr space around GI/PVC housing pipe

upto 5 mtr below ground level ( as per drawing ) to plug the bore hole

excluding cost of cement all complete as per direction of the Engineer-

230 75 in-charge . Mimimum one meter of casing pipe to nserted in the bore in cum 0.40 9608.62 3843.00 0.00

to the rock the bottom to ensure sanitary sealing ( excluding cost of

cement which willbe supplied by the Department ) .

CC(1:2:4) with 12mm chips for grouting up to 5 mtr Depth in

Supplying all materials, labour, T&P and providing fitting & fixing

submerssible pump with squirrel cage induction type submerssible

electric motor to run single-phase line voltage ranging from320 to450

volt confirm to IS 8034/89 with following specification suitable control

pannel jointing with GI/PVC/HDPE pipe, electrification, testing,

231 76 commissioning , trial running, conveyance of all material to work site, each 3.00 19618.21 58855.00 0.00

payment of all taxces etc all complete as per PH specification and

direction of Engineer-in-charge.

2H.P three phase 3 stage head range 30 to 54 metres, discharge 155

to 110 L.P.M with outlet dia of 32mm (2 Nos. Vertical & 1Nos.

234 79 40mm dia steel short piece each 3.00 238.36 0.00 715.00 0.00

Head Schedule Schedule Non-Schedule

. 32670202.57 Unit Qty. Schedule

Sl. Rate Amount Amount

Supplying all materials, labour, T & P and providing & electrification to

239 84 submerssible pump sets ane service connection including fitting fixing each 2.00 1770.00 3540.00 0.00

of electric board & Switch etc all complete as per direction of Engineer-

Supplying all materials , labour, T&P and providing and fixing to wall or

ceiling and floor PVC pipes conforming to ASTM-D-1785/89 ( Sch-80 )

and G.I pipe fittings of the following nominal bore with clamps including

240 85 making good the wall,ceiling and floor ,testing all complete as per P.H. mtr 150.00 576.55 86482.00 0.00

specification and direction of Engineer-in-charge .

In ground floor

40mm dia UPVC ASTM-D Pipes

Supplying all materials, labour, T&P and constructing Bore well

protection chamber of the inside size 650x650x1000hight with cement

concrete (1:3:6) using 40mm size hard granite metal on foundation,

1st class Fly ash brickwork in cement mortar (1:3), with base cement

concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster

(1:4) inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm

size h.g chips, earthwork in excavation in all kinds of soil and refilling

the cavity around the chamber including watering, curing, conveyance

of all materials to worksite, payment of royalty, taxes etc all complete

as per approved specification and direction of the Engineer in charge.

Bore well chamber

C- Construction of 6.75mx3.60m x 1.40m(h) Rain water

Harvesting System-3 Nos. Mtr.

Sinking of tube well through D.T.H.Rig.

200mm dia- 0.0m to 30.00m

Lowering of PVC casing pipe inside bore.

200mm dia- 0.0m to 30.00m

246 91 Cutting slot in casing pipe for recharge of rain water Mtr. 75.00 417.13 31285.00 0.00

Labour for packing gravel outside the tube well

248 93 Cost of washed gravel. Cum 4.70 2033.73 9559.00 0.00

Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial

lift including rough dressing and breaking clods to maximum 5cm to

7cm and laying in layers not exceeding 0.3 mtr in depth and as per

249 94 direction of the Engineer in charge. Cum 200.07 345.74 69172.00 0.00

Supplying all materials, labour, T&P and providing cement concrete

(1:4:8) with 4cm size hard granite metal including watering, curing,

conveyance of all materials to worksite, payment of royalty, taxes etc

all complete as per specification and direction of the Engineer in

Supplying all materials, labour, T&P and providing brick work with K.B

bricks having crushing strength not less than 75kg/cm² with

dimensional tolerance ± 8 percent in cement mortar (1:6) including

watering, curing, conveyance of all materials to worksite, payment of

251 96 royalty, taxes etc all complete as per specification and direction of the Cum 34.20 7072.45 241878.00 0.00

Engineer in charge.

L.Wall-2x7.65x0.25x2.0m=7.65

S.Wall-3x2.50x0.25x2.0m=3.75

Supplying all materials, labour, T&P and providing 12mm thick cement

plaster (1:4) on brickwork including watering, curing, conveyance of all

materials to worksite, payment of royalty, taxes etc all complete as per

specification and direction of the Engineer in charge.

Outside-2(7.65+3.0)x2.0m=42.60

Supplying all materials, labour, T&P and providing cement punning

including watering, curing, conveyance of all materials to worksite,

payment of royalty, taxes etc all complete as per specification and

253 98 direction of the Engineer in charge. Sqm 145.80 48.26 7037.00 0.00

Supplying all materials, labour, T&P and providing rigid and smooth

centering and shuttering for R.C.C works including false work and

dismantling them after casting including conveyance of all materials to

worksite, payment of royalty, taxes etc all complete as per specification

254 99 and direction of the Engineer in charge. Sqm 9.39 680.86 6393.00 0.00

Roof slab-1x0.90x2.50=2.25

Supplying all materials, labour, T&P and providing reinforced cement

concrete work of M-25 grade with 20mm and down grade black hard

granite crusher broken stone chips including hoisting, laying, watering,

255 100 curing, conveyance of all materials to worksite, payment of royalty, Cum 1.26 8041.35 10132.00 0.00

taxes etc all complete as per specification and direction of the Engineer

Supplying all materials, labour, T&P and providing M.S reinforcement

for R.C.C work including cutting, bending, binding, and tying the grills

and placing in position including cost of binding wire 18 to 20 gauge,

256 101 conveyance of all materials to worksite, payment of royalty, taxes etc Qntl. 1.02 10354.85 10562.00 0.00

all complete as per specification and direction of the Engineer in charge

Head Schedule Schedule Non-Schedule

. 32670202.57 Unit Qty. Schedule

Sl. Rate Amount Amount

Providing and filling filter media

20mm size washed gravel-

Providing fitting and fixing M.S.grill,Jalli cover over the harvesty pindi

Supplying all materials, labour, T&P and constructing surface drain of

size A-4 type with cement concrete (1:3:6) using 12mm size h.g chips

on bed, 1st class K.B brickwork in cement mortar (1:3) inside, 12mm

thick cement plaster (1:3) finished smooth with cement punning

261 106 including watering, curing, conveyance of all materials to worksite, Mtr. 200.00 1253.40 250679.00 0.00

payment of royalty, taxes etc all complete as per specification and

direction of the Engineer in charge.

D- Construction 3 nos 20 KLD RCC Septic tank

Supplying all labour , T&P and earth work in excavation of foundation in

263 108 all kinds of soil within 50m initial lead and 1.5m initial lift including 0.00 0.00

rough dressing & breaking clods to maximum 5cm to 7cm and laying

in layers not exceeding 0.3m in depth and as per direction of Engineer-

265 110 Extra lift of 1.50m or part thereof over the initial lift of 1.50m 0.00 0.00

Supplying all materials, labour, T&P and providing cement concrete (

1:4:8 ) with 4cm size crusher broken hard granite metal including

267 112 watering, curing, cost of all materials,conveyance of all materials to cum 10.02 5221.50 52298.00 0.00

work site with payment of royalty, all taxes etc all complete as per

P.W.D specification and direction of Engineer-in-charge.

Supplying all materials, labour, T&P and providing cement concrete (

1:2:4 ) with 12mm size crusher broken hard black granite chips

268 113 including watering, curing,cost of all materials, conveyance of all cum 6.16 7244.85 44624.00 0.00

materials to work site with payment of royalty, all taxes etc all

complete as per P.W.D specification and direction of Engineer-in-

Supplying all materials,labour,T&P and providing 6mm CP (1:4) with

cement punning on brick work including watering,curing,cost of all

269 114 materials, conveyance of all materials to worksite,payment of cum 16.20 180.30 2921.00 0.00

royalty,all taxes etc.all complete as per PWD specification and direction

of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing cement concrete

(1:1:5:3) with 12mm size hard broken granite chips for R.C.C works

270 115 including hoisting, laying, watering, curing, conveyance of all materials 0.00 0.00

to worksite, payment of royalty, taxes etc all complete as per

specification and direction of the Engineer in charge.

Supplying all materials, labour, T&P and providing 12 mm thick cement

plaster (1:3) on RCC work including watering, curing, conveyance of all

272 117 materials to worksite, payment of royalty, taxes etc all complete as per sqm 109.85 857.03 94149.00 0.00

specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing rigid & smooth

centering and shuttering for RCC works including false work and

273 118 dismantling them after casting including conveyance of all materials to sqm 10.23 501.74 5133.00 0.00

worksite, payment of royalty, taxes etc. all complete as per

specification and direction of the Engineer-in-charge

Supplying all materials, labour, T&P and providing M.S reinforcement

for R.C.C work including cutting, bending, binding, and tying the grills

and placing in position including cost of binding wire 18 to 20 gauge,

274 119 conveyance of all materials to worksite, payment of royalty, taxes etc 0.00 0.00

all complete as per specification and direction of the Engineer in

Supplying all materials, labour, T&P and making MS step Iron in 20mm

diameter MS steel bars and fixing into walls of manhole / septic tank

duly embedded in cement concrete (1:3:6) with 12mm size crusher

276 121 broken hard black granite chips including watering, curing,cost of all each 36.00 278.95 10042.00 0.00

materials, conveyance of all materials to worksite, payment of

royalty,all taxes etc complete as per specification and direction of the

Engineer-in-charge

Supplying all materials, labour, T&P and providing,fitting and fixing

100mm x 100mm x 100mm SW Tee in wall including filling the recess

277 122 with cement concrete (1:3:6) with 12mm size H.G chips all complete each 6.00 424.68 2548.00 0.00

including watering, curing, conveyance of all materials to worksite,

payment of royalty all complete as per specification and direction of

the Engineer in charge

Supplying all labour, T&P and filling in foundation and plinth with

278 123 excavated earth including watering and ramming etc. complete as cum 42.00 132.16 5551.00 0.00

directed by the Engineer-in-charge.

E- 1 Nos. 50,000 ltr capacity Domestic R.C.C. Under ground

Earth work in excavation of foundation in all kinds of soil with in 1.5m

280 124 initial lift including dressing and leveling of bed and breaking the clods Cum. 108.00 344.21 37174.00 0.00

and the excavated materials with in 50m initial lead as per direction of

Engineer in charge.

Supplying all labor T&P & filling foundation and plinth with excavated

281 125 materials well watered & rammed etc. all complete as per direction of Cum. 72.00 1194.87 86030.00 0.00

Rigid & smooth centering & sheltering for RCC work including falls work

282 126 & dismantling than after casting including cost of materials in ground Sqm. 33.05 889.25 29390.00 0.00

Head Schedule Schedule Non-Schedule

. 32670202.57 Unit Qty. Schedule

Sl. Rate Amount Amount

Supplying all materials, T&P and providing MS reinforcement for RCC

work including cutting, bending, binding and tying the grills and placing 18.57

in position including cost of binding wire 18 to 20 gauges.

Supplying all materials, labor T&P providing CC (1:3:6) with 4 cm HG

284 128 metal including watering curing lead of all materials to site etc. Cum 6.10 6742.76 41131.00 0.00

complete. 1 x 9.00m x 6.00m x .15m =

Providing C.C. (1:1½:3) with 12mm size hard granite chips of RCC

285 129 work including hoisting and laying and curing with lead of all materials Cum. 37.09 8535.88 316555.00 0.00

Supplying all materials labour T&P and providing 12mm thick C.P (1:3)

286 130 including watering curing and conveyance of all materials to site. Sqm. 96.18 210.51 20247.00 0.00

Supplying all materials labour T&P and providing cement punning

287 131 including watering curing and conveyance of all materials to site. In Sqm. 26.12 178.65 4666.00 0.00

Supplying all materials labour T&P filling sand in foundation and plinth

288 132 with well watered and rammed etc. all complate. As per direction of Cum. 20.00 39.77 795.00 0.00

289 Sub-Total of Plumbing Works 4224980.10 214638.40

291 A. Electrical Works 0.00 0.00

292 A. Circuit Cum Wiring

133 Supplying & Wiring for light point/ fan/ exhaust fan point/ call bell point

with 1.5 sqmm FRLS PVC insulated copper conductor single core cable

in surface / recessed 1.6 mm thick PVC conduit with modular switch

and earthing the point with 1.5 sqmm FRLS PVC insulated copper

293 conductor single core cable including providing modular box with cover 0.00 0.00

of requisite number of modules including providing cover plates as

required. (Make of Switches: Legrand/ Schneider/ Crabtree/ ABB/

Reckoner),(Make of wire:-Finolex/ Polycab/ Anchor/ Havells) )

a) Single light point controlled by one 6A switch or first light point of

296 b) Subsequent point of group control Each 31 730.42 22643.02 0.00

134 Supplying and fixing two module steeped type electronic fan regulator

297 with proper modular plate switch box including connections etc. as Nos 33 598.26 19742.58 0.00

required.(Make : Legrand/ Schneider/ Crabtree/ ABB/ Reckoner)

135 Supplying and fixing 6 Amp plug with 6 Amp switch (Modular Type) on

298 existing board.(Make: Legrand/ Schneider/ Crabtree/ ABB/ Reckoner) Nos 12 285.56 3426.72 0.00

136 Supplying & fixing suitable size GI Box with modular plate and cover in

front on surface or in recess, including providing and fixing 2nos 3pin

300 5/6 amps modular socket outlet and 2nos 5/6 amps modular switch Nos 5 1151.68 5758.40 0.00

etc. as required.(Make : Legrand/ Schneider/ Crabtree/ ABB/

137 Supply, installation, testing & commissioning of 6 / 16 Amp Plug Boards

consisting of a 16 Amp clip-in type modular switch with indicator and a

6/16 Amp clip-in type modular shuttered plug socket fixed on metallic

303 concealed box including interconnections and making good the Nos 11 977.04 10747.44 0.00

damages caused complete as required and as per direction of Engineer-

in-charge.(Make : Legrand/ Schneider/ Crabtree/ ABB/ Reckoner)

138 Supply, installation, testing & commissioning of 6 / 16 Amp Plug Boards

consisting of 2nos 16 Amp clip-in type modular switch with indicator

and 2nos 6/16 Amp clip-in type modular shuttered plug socket fixed on

306 metallic concealed box including interconnections and making good the Each 6 1471.46 8828.76 0.00

damages caused complete as required and as per direction of Engineer-

in-charge.(Make : Legrand/ Schneider/ Crabtree/ ABB/ Reckoner)

139 Supplying, installation, testing & commissioning of 25 Amp AC starter

switch with 25 Amp modular socket outlet with 25 Amp Plug on

308 surface or in recess, on 2 Nos two module GI box with plate etc. Each 10 2429.62 24296.20 0.00

complete with direction of Engineer-in-charge. Starter-Crabtree(cat no-

ACT0202504) or equivalent.(Make : Legrand/ Schneider/ Crabtree/

140 Supply and Wiring for circuit/ submain wiring along with earth wire of

following size of FRLS heavy gauge PVC insulated copper conductor

310 single core cable in heavy duty PVC conduit laid in surface/ recess as 0.00 0.00

required. (Make of wire:-Finolex/ Polycab/ Anchor/ Havells)(Make:-

NORPACK/ AKG/ BEC/ PRECISION)

321 B. Fan & indoor Fixtures 0.00 0.00

141 Supply, delivery and fixing of Ceiling fan hook box made out of 18 swg

GI sheet and containing 10 mm dia round ms bar projecting atleast

322 150mm on either side & duly bent to accommodate ceiling fan down Each 33 154.58 5101.14 0.00

rod bolt & having earthing arrangement as per direction of Engineer-

142 Supplying, installation, testing and commissioning following type of

light fixtures with dummy box for surface mounted fixtures only, fans

323 and exhaust fans with all accessories, as required.(The colour 0.00 0.00

temprature for fixtures shall be above 4000 deg K, CRI Min 80 & white

in colour as per application)

Head Schedule Schedule Non-Schedule

. 32670202.57 Unit Qty. Schedule

Sl. Rate Amount Amount

a) Fully diffussed Surface mounted (1800 Lumen/ 18W) LED backlit round

Downlighter made of PDC aluminum with high efficeint LED similar to Each

Halonix (CAT No:HLDLRS-R06-18-CW) / Equivalent of Philips/

b) Aluminium extrusion Housing Batten type Surface/Wall mounted 4' LED

325 fitting (2100 Lumen/ 20W) similar to Halonix (CAT No:HLB-03-20-CW- Each 35 1357.00 0.00 47495.00

AL-SQ) / Equivalent of Philips/ Wipro/Orient.

c) Aluminium extrusion Housing Batten type Surface/Wall mounted 2' LED

326 fitting (1000 Lumen/ 10W) similar to Halonix (CAT No:HLB-03-10-CW- Each 10 885.00 0.00 8850.00

AL-SQ) / Equivalent of Philips/ Wipro/ Orient.

d) Plastic Batten type Surface/Wall mounted 2' LED fitting for mirror

328 light(1000 Lumen/ 10W) similar to Halonix (CAT No:HLB-07-10-CW- Each 6 672.60 0.00 4035.60

IP) / Equivalent of pHILIPS/ Wipro/ Orient.

e) 90W Street Light IP66 mounted with 32mm dia 800mm length GI

329 Bend similar to Halonix (CAT No:HLSLD-01-90-CWL-R-SH) / Equivalent Each 4 10974.00 0.00 43896.00

of Philips/ Wipro/ Orient.

143 Supplying, installation, testing and commissioning of ISI Marked AC

ceiling fan Complete with other accessories suitable for operation on

330 230/240V 50Hz IC, wiring the down rod of standard length (upto 0.00

30CM) with 1.5sqmm Frls copper wire as required. (Make : Halonix/

Crompton/ Orient/ Khaitan/ Havells).

144 Supplying, installation, testing and commissioning of Exhaust fan ISI

333 Marked including louvres, Ceiling Rose & Electric Connection as 0.00 0.00

required. (Make -Halonix/Crompton/Orient/Khaitan/Havells)

335 C. Panels, MDBs, DBs. MCBs 0.00 0.00

145 Supplying and fixing following way, horizontal type SPN, sheet steel,

MCB distribution board, 230 V, on surface/ recess, complete with

337 tinned copper bus bar, neutral bus bar, earth bar, din bar, 0.00 0.00

interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator). (Make: L&T/ABB/

Legrand/Schneider/ Siemens )

Supplying and fixing following way, horizontal type three pole and

neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess,

complete with tinned copper bus bar, neutral bus bar, earth bar, din

339 bar, interconnections, powder painted including earthing etc. as

required. (But without MCB/RCCB/Isolator). (For all Floors DB)(Make:

L&T/ABB/Legrand/ Schneider/ Siemens )

147 Supplying and fixing following rating MCBs/ Isolator in the existing MCB

341 DB complete with connections, testing and commissioning etc. as 0.00 0.00

required (Make: L&T/ ABB/ Legrand/ Schneider/ Siemens )

342 a) 63 Amps, DP 10 KA MCB (C-Curve) Each 2 1834.90 3669.80 0.00

343 a) 63 Amps, FP 10 KA MCB (C-Curve) Each 1 3575.40 3575.40 0.00

344 b) 6 Amp to 32 Amp, 10 KA SP MCB (C-Curve) Each 40 244.26 9770.40 0.00

Supplying and fixing following rating RCCB/ELCB in the existing MCB

345 DB complete with connections,testing and commissioning etc. as 0.00 0.00

required (Make: Legrand/ L&T/ Schneider/ Siemens/ABB )

148 Supply, delivery, installation & testing of TV outlet boards containing a

clip-in type modular TV Socket outlet fixed on metallic concealed box

348 including connections and making good the damages caused complete Each 3 522.74 0.00 1568.22

as required and as per direction of Engineer-in-charge.

149 Wiring to TV Antenna Socket outlet from junction box with Coaxial

349 copper conductor TV antenna cable run inside pvc conduit complete Mtr 90 102.66 9239.40 0.00

including termination, testing etc complete as required and as per

direction of Engineer-in-charge.

350 FIRE EXTINGUISHER 0.00 0.00

Note : [1] All Fire Extinguisher shall be HCFC, CFC and Halons free. [2]

351 The Fire Extinguisher Manufacturer/ Supplier shall provide declaration, 0.00 0.00

Technical Data Sheet/cutsheet of All type of Fire extinguisher to be

150 Providing and fixing Carbon-di-oxide fire extinguishers consisting of

welded M.S cylindrical body,squeeze lever discharge valve fitted with

internal discharge tube, ISI marked high pressure discharge hose,

352 discharge nozzle, suspension bracket, confirming to IS : 15683 0.00 0.00

finished externally with red enamel paint and fixed to wall with

brackets with rawl plug/dash fasteners complete with internal charge

with CO2 gas conforming to IS : 307-1996..

151 Providing and fixing ABC stored pressure dry chemical powder (mono

ammonium phosphate) Fire Extinguisher IS : 15683 latest revision

manufacturer and of CRCA sheet in welded construction, finish with

354 High quality epoxy polyster powder coated complete with brass forged 0.00 0.00

ball valve, gun metal cap and nozzle, including initial filled and wall

suspension bracket (suitable for fighting in class 'A', B & 'C' that is

wood, textile, flammable liquid, electric and gases).

357 Sub-Total Internal Electrical Works 685982.38 320484.46

359 A. External Lighting Fixture 0.00

360 152 Post top Lights 0.00

Head Schedule Schedule Non-Schedule

. 32670202.57 Unit Qty. Schedule

Sl. Rate Amount Amount

Supply of LED Post Top with a system lumen output of 4000 lumens

and a minimum system efficacy of >90 lm/W. The luminaire shall have

a rated system lifetime of 25,000 burning hours at L70. The luminaire

should have a color temperature of 4000K and CRI > 70. The luminaire

361 shall meet IP65 with THD < 20% and PF > 0.9. The luminaire shall 0.00

have closed diffused optics with polycarbonate diffuser board. The

fixture is similar to Wipro LP09S-501-XX-57-XX . This is including cost

of all material, conveyance, royalities as directed by Engg-in-charge all

Installation of LED post tops includes preparing designing & erecting a

foundation in the ground with anchor bolts to suit the fixing of base

362 plate, fixing of post top on foundation using anchor bolts & the base 0.00

plate. The contractor shall ensure all post tops installed are in line

363 Pole height: 2.5 to 3 m above ground level. 0.00

Body of the pole: Hot dip GI with matt finish & 70% grey/ black color

or as specified by EIC.

365 Junction Box: Inbuilt with MCB, connector etc., 0.00

366 Desired output lux level:15(+/-3) 0.00

367 Protection: IP65 class I 0.00

368 Voltage range : 210-270 0.00

Colour temprature : 5700K (neutral)(Makes:-Wipro, Phillips, Havells)

370 153 Spike / focus Lights 0.00 0.00

Supply, Installation,Testing & commissioning of IP-65, LED Garden

Spike Light including 1 no. of 8 watt LED luminairs & Basewith

371 BrickMasonry work (200x200x200)mm for the above fitting as per EIC Nos 15 9936.78 0.00 149051.70

of approved make including with all materials & labour Similar to Wipro

CAT No. LF05-600-036-27-XX.(Makes:-Wipro, Phillips, Havells)

Supply, installation, testing & commissioning of 11W STATIC COLUMN

Bollards Light with other necessary arrangements like Pedestal & Nos 20

connector etc Similar to : Wipro CAT No. LB14-131-XXX-65-05.(Makes:-

Wipro, Phillips, Havells)

374 B. Panels, MDBs, DBs. MCBs 0.00 0.00

375 155 External Feeder Pillar for External Lighting 0.00 0.00

Design, Supplying, Installation, testing and commissioning of 415 V

feeder pillar panel compartmentalised, factory made Godrej Almira

type suitable for outdoor installation, made up of CRCA sheet steel of

thickness not less than 2 mm with a weather proof canopy of top,

double door construction, IP 54 protection, anti corrosive chemical

resistant paint with, automatic dawn and dusk with astronomical

controller for street light outgoing, , complete with Aluminium bus bars,

inter-connection with solid/ stranded copper conductor wires/ copper

strips, glands neutral links, etc., and mounted with following switch

gears, etc., complete as required with detailed specifications: , energy

saver for automatic switching ON/OFF as per pre-sets time cycle,

digital multifunctional meter and suitable CT etc., including concrete

pedestal and associated civil works.

Busbar-100 Amp Al busbar with neutral bus SC rating of 25 KA

suitable for operation at 415 Volt, 50 Hz, 3 Phase supply

378 One (1) - 32A,TPN, 25KA, MCCB Incomer 0.00 0.00

380 One Set ON/OFF Indicating lamp with control fuse/ MCB. 0.00 0.00

381 one set of Contactor & Digital Timer with incomer side. 0.00 0.00

382 4 Nos - 16 Amp DP MCB Outgoing 0.00 0.00

1 No.s - 16 Amp DP MCB with 6/16 Amp socket outlet with 10 Amp

modular switch and 1 No- Bracket Holder with 6 Amp Modular switch.

PANEL AS ABOVE (Make of switch gears: LK/ Schneider/

Seimens/ ABB or equivalent make of similar specification)

385 C. Cables, Cable Laying & End Termination 0.00 0.00

156 Supplying & Testing of 1.1 KV grade Aluminium XLPE power cable of

386 following size suitable for 415 Volt, 3Ph, 50 c/s supply. (Make:- KEI/ 0.00 0.00

Polycab/ Havells)

389 CABLE LAYING 0.00 0.00

157 Laying of One No. PVC insulated and PVC sheathed/ XLPE power cable

of 1.1 KV grade of following size in the existing RCC/ HUME/

390 MASONERY TRENCH/ HDPE Pipe/ DWC Pipe/ Metal Pipe/ On Wall 0.00 0.00

Surface (Clamped with saddle/ PVC & UPVC Pipe)/ Cable Tray etc. as

a) Laying of one number of PVC insulated and PVC sheathed / XLPE power

391 cable of 1.1KV grade of size not exceeding 25 sq.mm direct in ground Mtr 250 66.08 16520.00 0.00

in the existing RCC/ HUME/ STONEWARE/ METAL pipe as required.

392 TERMINATION OF CABLES 0.00 0.00

158 Supply & Making end Termination with brass compression gland and

393 Cu/aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv 0.00 0.00

grade (without cost of Cable)

159 Providing, fixing and laying of following dia HDPE/ DWC pipe (medium

class) in ground complete with fitting including trenching (75 cm depth

minimum) and refilling as per direction of Engg.-in-Charge. Ncessary

396 test report & Warrnaty certificate to be submitted to the department 0.00 0.00

for genuinity of product & to avail free after sales service within

warranty period for acceptance of materials.

399 D. Earthing 0.00 0.00

160 S/IT/C of materials and installation of GI earth plate 600mm x 600mm

x 6mm thick ISI marked with G. I. nut bolts & washers including cost

of burnt wood charcoal, salt, foreign soil, water pouring arrangements,

400 brick masonary enclosure on top with removable RCC cover complete Set 1 7670.00 7670.00 0.00

with labour for excavation of pit in all kinds of soil & rock as required

and as per direction of Engineer-in-charge.The entire earthing system

should be Replacement Warranty will be 2 years

Head Schedule Schedule Non-Schedule

. 32670202.57 Unit Qty. Schedule

Sl. Rate Amount Amount

161 Providing and fixing 25mm x 5 mm GI strip on surface or in recess for

401 connections etc. as required as per direction of Engg.-in-Charge. Mtr 10 177.00 1770.00 0.00

162 Supply, Escavation and Fixing of Coil earthing to the Lighting Pole.

403 Main LT PANEL AT TRANSFORMER YARD 0.00 0.00

404 Panels outdoor Type 0.00 0.00

Design, Supplying, Installation, testing and commissioning of 415 V

feeder pillar panel compartmentalised, factory made Godrej Almira

type suitable for outdoor installation, made up of CRCA sheet steel of

thickness not less than 2 mm with a weather proof canopy of top,

double door construction, IP 54 protection, anti corrosive chemical

405 resistant paint with Aluminium bus bars, inter-connection with solid/ 0.00 0.00

stranded copper conductor wires/ copper strips, glands neutral links,

etc., and mounted with following switch gears, etc., complete as

required with detailed specifications: including concrete pedestal and

associated civil works.

406 163 MAIN LT PANEL 0.00 0.00

Busbar -400 Amp Al busbar with SC rating of 36 KA suitable for

operation at 415 Volt, 50 Hz, 3 Phase supply

One(1)-Incomer feeders (from EB/Raw 200KVA Transformer)

each comprising of

One (1) - 415V, 320 A, 25KA, TPN, MCCB with microprocessor

409 controlled OL/ SC and EF releases, shunt trip release, auxilliary 0.00 0.00

contacts and terminals taken out suitable for bustrunking termination

One(1)- Multifunction digital meter suitable for three phase four wire

system, unbalanced loading CL 1.0, flush mounting with RS 485

communication port for reading Voltage, Current, pf. KW, KWH, KVA,

KVAr, KVAh, KVArHr (BMS Compartibilty)

One set - Indicating lamp for ON/OFF/Trip and Phase indication with

control fuse/ MCB.

413 1Set of 320Amps 4Pole Changeover switch 0.00 0.00

One(5) - Outgoing Feeders (For 120Bed Hostel) each

415 One (1) - 250A,TPN, 25KA,TMP MCCB 0.00 0.00

One Set ON/OFF Indicating lamp with control fuse/ MCB with required

other accesories.

Four(4) - Outgoing Feeders for (1no for 48bed Hostel, 1no for

417 Arts Block, 1no for Science Block and 1no Spare) each 0.00 0.00

418 One (1) - 250A,TPN, 25KA,TMP MCCB 0.00 0.00

Four(4) - Outgoing Feeders for (Four spare) each Comprising of

420 One (1) - 63 Amp 4P, 10 KA MCB (C-Curve) 0.00 0.00

Four(4) - Outgoing Feeders for (Four spare) each Comprising of

422 One (1) - 63Amp DP, 10 KA MCB (C-Curve) 0.00 0.00

PANEL AS ABOVE (Make of switch gears: LK/ Schneider/

Seimens/ ABB or equivalent make of similar specification)

424 Cables, Cable Laying & Termination 0.00 0.00

164 Supplying & Testing of 1.1 KV grade Aluminium XLPE power cable of

425 following size suitable for 415 Volt, 3Ph, 50 c/s supply. (Make:- 0.00 0.00

Polycab, Havells, KEI)

427 CABLE LAYING 0.00 0.00

165 Laying of one number PVC insulated and PVC sheathed / XLPE power

428 cable of 1.1 KV grade of following size direct in ground including 0.00 0.00

excavation, sand cushioning, protective covering and refilling the

trench etc as required.

429 a) Above 95 sq. mm and upto 1855 sq. mm Mtr 100 440.14 44014.00

430 TERMINATION OF CABLES 0.00 0.00

166 Supply & Making end Termination with brass compression gland and

431 Cu/aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv 0.00 0.00

grade (without cost of Cable)(Make: Raychem/M-seal/3M)

434 167 200KVA TRANSFORMER WITH ACCESSORIES Each 1.00 2124000.00 2124000.00

435 Sub-Total of External Lighing Fixture 533165.30 2784702.06