Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.4 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹49.4 L+₹4.0 L (8.82%)Rejected-Finance | L2 | Rejected-Finance Not L1 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
31 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TEZPUR
GE AF TEZPUR, POST SALONIBARI,DIST-SONITPUR ASSAM
PROVISION OF OFFICE ROOM WITH TOILET FACILITIES INCLUDING HARDSTANDING FOR JEs OF AGE E/M (AF) TEZPUR AND ADDITION/ALTERATION TO BUILDING No. P-864 (ALTERNATE ATC) AT AF STN TEZPUR UNDER GE (AF) TEZPUR.
2022_MES_544288_1
GE AF/ TEZ/8670/E8
Open Tender
Civil Works
Item Rate
180 days
TEZPUR
AS PER NIT
8 documents required · 8 mandatory
₹500
GE (AF) TEZPUR
₹90,000
Yes
31 Dec 2022
9 Aug 2022
2 Sept 2022
9 Aug 2022
31 Aug 2022
18 Aug 2022
Amount
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles,complete all as directed.
Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n. exc. 1.5 Sq. M each, complete all as directed.
Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sq. M but not exc. 4.0 Sq M each, complete all as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil ,complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m,in soft/loose soil, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around,in layers not exceeding 25 cm,complete all as specified and directed.
Returning filling in soft/loose soil, including, spreading levelling watering and well ramming in layers not exc. 25 cm complete all as specified and directed.
Removing excavated soils to a distance not exceeding 50 Metres and depositing where directed at a level n. exc. 1.5 M above the starting point complete all as specified and directed.
Materials and Labour for, broken stone or boulder hardcore of gauge exceeding 63 mm but not exceeding 100mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface , complete all as specified and directed.
Materials and Labour for anti termite treatment in treating the bottom and sides of excavation at the rate of 5 Litres of emulsion per square metre of surface area complete all as specified and directed.
Materials and Labour for anti termite treatment in treating the top surface of filled earth at the rate of 5 Litres of emulsion per square metre of surface area complete all as specified and directed.
Materials and labour for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, complete all as specified and directed.
Materials and Labour for plain cement concrete (1:3:6) Type C-2 using 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed.
Materials and Labour for plain cement concrete (1:2:4) Type B-2 using 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed.
Materials and Labour for plain cement concrete (1:3:6) type C1 using 20 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary from work complete all as specified and directed.
Materials and Labour for plain cement concrete (1:2:4) type B0 using 12.5 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges including necessary from work complete all as specified and directed.
Materials and Labour for reinforced cement concrete M-25 Design Mix, using 20 mm graded aggregates in slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like, complete all as specified and directed.
Materials and Labour for reinforced cement concrete M-25 Design Mix, using 20 mm graded aggregates in beams,cantilevers,bressummers, lintels over 1.5m span, complete all as specified and directed.
Supply only liquid water proofing compound all as specified
Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:6),complete all as specified and directed.
Materials and Labour for brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in built in CM (1:4),complete all as specified and directed.
Materials and Labour for 40mm thick damp proof in in cement concrete 1:2:4 type B-0 (using 12.5 mm graded aggregate) course to horizontal or vertical surfaces including necessary formwork, complete all as specified and directed
Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) for fair finished surfaces of concrete, flat, complete all as specified and directed.
Use and waste of form work to sides and soffits of floor or roof beams, beam haunchings , girders, bressummers, lintels, cantilevers, shelves including supports,overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces of concrete, flat, complete all as specified and directed.
Materials and Labour for, second class hard wood, plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue, pinned at joints, complete all as specified and directed.
Supply and Fix, 35 mm thick, second class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats,complete all as specified and directed.
Materials and Labour for,5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining,Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site,complete all as specified and directed.
Supply and Fix, Aluminium anodized barrel tower bolts of extruded section, 150 mm long complete all as specified and directed.
Supply and Fix, Aluminium Alloy, anodised, sliding door bolt, length of bolt 300 mm,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.
Supply and Fix,aluminium handles,cast type,anodised, 150 mm size, complete all as specified and directed.
Supply and Fix, medium wight, cold rolled mild steel butt hinges,100 mm size, complete all as specified and directed
Supply and fix mild steel TMT bars 10 mm dia. and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed
Supply and fix mild steel TMT bars 5 mm dia. and over up to and including 10 mm dia. in stirrups, spacers, binders etc. cut to length, bend to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed.
Materials and Labour for mild steel works, conforming to Fe 290, Grade E-165 , in bands, straps,supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles,complete all as specified and directed.
Materials and Labour for welded steel wire fabric of weight not exc 4 kg per square metre,supplied and fixed complete to wood or steel members,complete all as specified and directed.
Materials and Labour for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240,complete all as specified and directed.
Materials and Labour for, black hollow steel sections for structural use, conforming to IS 4923:1997 (Reaffirmed 2009),designation CF, in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Square or Rectangular Hollow Sections) including distance pieces, cleats etc.,complete all as specified and directed.
Supply and Fix,powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws,complete all as specified and directed.
Supply and Fix,anodised aluminium, door frame with anodised aluminium shutters,side hung type, without sash bars, with top rail, styles, lock rail and bottom rail, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as suitable barrel tower bolts of extruded section (2 No.) suitable handle (2 No.), lock (01 No),screws etc.with and including 5.5 mm thick sheet glass,tinted,complete all as specified and shown on drawings and including taking down existing frame with shutters (without taking off shutters from the frame),complete all as specified and directed. Notes:- (i) Refer list of Drawings. (ii) Overall size of opening will be measured.
Supply and Fix,anodised aluminium,window and ventilator frame with anodised aluminium two track sliding glazed shutters,without sash bars,including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading,locking arrangements,handles,screws etc. with and including 4mm thick sheet glass,tinted,complete all as specified and shown on drawings and including taking down existing frame with shutters (without taking off shutters from the frame),complete all as specified and directed. Notes:- (i) Refer list of Drawings. (ii) Overall size of opening will be measured.
Material and Labour for pre-painted, galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws,complete all as specified and directed.
Material and Labour for pre-painted,galvalume aluminium zinc coating GI based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws,complete all as specified and directed.
Material and Labour for pre-painted,galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws, including dismantling of existing plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings,complete all as specified and directed.
Material and Labour for pre-painted,galvalume aluminium zinc coating GI based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws,complete all as specified and directed. Notes:- (i) The existing ridge, valley, cladding to wall and gutters etc. sheets are deemed to be dismantled along with the roofing sheets. (ii) Old unserviceable sheets will be sold to the Contractor under relevant item in Schedule of Credit.
Materials and Labour for,anodised aluminium snap grid frame work for false ceiling, size of grid 605 mm x 605 mm as per clause 10.38 of SSR Part-I (2009) including 6 mm thick, high pressure steam cured (HPSC) non asbestos fibre cement building boards fixed or laid to aluminium framework with screws,complete all as specified and directed.
Materials and Labour for,9 mm thick,prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination,fixed with screws to frame work,complete all as specified and directed.
Materials and Labour for water proofing treatment over smooth finished surfaces by application of cold applied bituminous primer as per manufacturer's instructions, providing and laying 3.00 mm thick, plain finish, APP modified bitumenous waterproofing and damp proofing membrane with polyester reinforcement (Non-Woven Polyester Mat), conforming to IS 16532 :2017 (Dimensions and weight of APP membrane polyester as per Table 2 of IS), by forced (torch on) application, with minimum 75 mm overlap on longitudinal direction and 100 mm overlap on the transverse direction,complete all as specified and directed.
Materials and Labour for 50 mm thick plain cement concrete (1:3:6) type C1 using 20 mm graded aggregates as in floor/plinth protection including finishing surface even and smooth without using extra cement,complete all as specified and directed.
Materials and Labour for 100 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded aggregate as in sub base in floor/paving/ hardstanding, complete all as specified and directed.
Materials and Labour for 100 mm thick plain cement concrete (1:2:4) type B2 using 40 mm graded aggregate as in sub base in floor/paving/ hardstanding including spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green, complete all as specified and directed.
Materials and Labour for machine cut Kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20 mm thick screed bed or bedding layer of cement mortar (1:6),including dismantling existing stone slabs and tiles of any description or thickness in floors, aprons etc.laid,bedded and pointed in any mortar, complete all as specified and directed.
Materials and Labour for,granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including roviding edge moulding and machine polishing to edge to give high gloss finish etc.,complete all as specified and directed.
Materials and Labour for, Vitrified Ceramic Tiles, Light Shade, 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sq M, in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed or bedding layer of cement mortar (1:6),complete all as specified and directed
Materials and Labour for, Vitrified Ceramic Tiles, Light Shade, 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sq M,on vertical surface of wall such as dados, skirting etc,,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:3),complete all as specified and directed
Materials and Labour for, Vitrified Ceramic Tiles, Light Shade, 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sq M, in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed or bedding layer of cement mortar (1:6) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed
Materials and Labour for, Vitrified Ceramic Tiles, Light Shade, 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sq M,on vertical surface of wall such as dados, skirting etc,,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:3) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed
Materials and Labour for 10 mm thick,cement plaster/screed, in cement mortar (1:3) mixed with water proofing compound as per manufactures instructions, complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately) complete all as specified and directed.
Materials and Labour for rendering 10 mm thick, cement plaster, in cement mortar (1:6) on surface other than fair face of brickwork and finishing surface even and smooth without using extra cement,complete all as specified and directed.
Materials and Labour for rendering 10 mm thick, cement plaster, in cement mortar (1:6) on surface other than fair face of brickwork and finishing surface even and smooth without using extra cement including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key,scrubbing down with water etc.,complete all as specified and directed.
Materials and Labour for rendering 5 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc.,complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately)
Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls,complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately)
Material and Labour for preparing old surfaces plastered or unplastered and applying one coat of white wash,on ceiling, complete all as specified and directed.
Material and Labour for washing,rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion,on walls, complete all as specified and directed.
Materials and Labour for,preparing surfaces plastered or unplastered on walls and applying two coats of distemper oil emulsion over a coat of primer over and including 1mm thick wall care putty,complete all as specified and directed.
Materials and Labour for,preparing AC sheet,plywood surfaces and like in ceiling and applying two coats of distemper oil emulsion over a coat of primer over,complete all as specified and directed.
Materials and Labour for,complete removal of existing treatment on walls and applying two coats of distemper oil emulsion over a coat of primer over and including 1mm thick wall care putty,complete all as specified and directed.
Material and Labour for preparing surfaces plastered or unplastered on walls and applying two coats of cement based paint including priming surfaces with alkali resistant priming paint,complete all as specified and directed.
Material and Labour for washing,rubbing down and stopping of distempered and painted surfaces on wall and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm,complete all as specified and directed.
Material and Labour for preparing surfaces plastered or unplastered on wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm,complete all as specified and directed.
Material and Labour for applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer on new or previously untreated wood or wood based surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.
Material and Labour for applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer on new steel and iron surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.
Materials and Labour for galvanized steel tubing, medium grade, 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor,complete all as specified and directed.
Materials and Labour for galvanized steel tubing, medium grade, 20 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor,complete all as specified and directed.
Supply and Fix, bib tap, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, 15 mm bore and fixed, complete all as specified and directed.
Supply and Fix,sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowlsize 410mm x 330mm x 160mm,complete all as specified and directed.
Supply and Fix,75 mm bore UPVC (SWR) pipes, single socketed in any length with rubber ring joints,fixed to walls,complete all as specified and directed.
Materials and Labour for,drilling holes of suitable size in existing floors,wall etc.at a interval of 500 mm centre to centre,cleaning of holes throughly and fitting to the holes,13 mm x 75 mm (long) Flat Button Head GI injection grout packers to be used with the grouting pump as nozzles,complete all as specified and directed.
Materials and Labour for injecting solvent free,moisture intensive epoxy resin based putty,all as per manufacturer's instructions,complete all as specified and directed. [Make:Fosroc 'Exposeal UW (Formerly Nitoseal UW)'/ Choksey 'EPOXY-PUTTY-B'/ Sika 'Sikagard®-694 F(I)'/STP Ltd 'ShaliFix®3 EP']
Materials and Labour for injecting low viscous fast foaming,solvent free water reactive polyurathene foam having properties for curing to form a dense and hard elastic foam with a fine cellelur structure,all as per manufacturer's instructions,complete all as specified and directed. [Make:Fosroc'Nitofi ll WS60'/ Choksey 'Techfoam AC-4'/ Sika 'Injection-101 RC'/STP Ltd 'ShaliGrout® PU']
Materials and Labour for injecting low viscous elastic,solvent free water reactive polyurathene liquid resin having properties to form an elastic sealing on contact with water for permanent water tight sealing,all as per manufacturer's instructions, complete all as specified and directed. [Make:Fosroc 'Nitofi ll UR63'/ Choksey 'Mastergrout CPG-1'/ Sika ' Injection-201 CE'/ STP Ltd 'ShaliGrout® PU 2K'] Notes:- (Applicable for BOQ Serial Item No 77,78 & 79):- (i) Bidders shall visit site to ascertain the exact nature of damage before quoting the rates for these items as these items are considered for rehabilitation of structural damage in buildings. (ii) Contractor shall furnish five years guarantee for efficacy of the repair works .
Materials and Labour for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, drawn into and including PVC conduit complete with all fittings and accessories, fixed to walls/ceiling including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one light point controlled by one switch,complete all as specified and directed.
Materials and Labour for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, drawn into and including PVC conduit complete with all fittings and accessories, fixed to walls/ceiling including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one fan point controlled by one switch,complete all as specified and directed.
Materials and Labour for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, drawn into and including PVC conduit complete with all fittings and accessories, fixed to walls/ceiling including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one 3 Pin 5 Amps socket outlet independent,complete all as specified and directed.
Materials and Labour for concealed type point wiring with 2.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core,drawn into and including PVC conduit complete with all fittings and accessories, fixed to walls/ceiling including 2.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one 3 Pin 15 Amps socket outlet independent,complete all as specified and directed. NOTES: - (Applicable for BOQ Serial Item No.80 to 83) (i) The quoted rates are deemed to be inclusive of the rate for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., and making good, cutting not exc. 10 cm girth, in brick walls. (ii) Metal Flush Box and Cover Plate with Frame for Modular fittings will be measured and paid separately under respective items of this BOQ.
Supply and Fix,Modular Switch, one way,6 Amps,1 Module, complete all as specified and directed.
Supply and Fix,Modular Switch, one way,16 Amps,1 Module, complete all as specified and directed.
Supply and Fix,ceiling rose,three terminal, PVC/polycarbonate insulated body, complete all as specified and directed.
Supply and Fix,Modular Socket, 6 Amps, 2/3 Pin, 2 Module, complete all as specified and directed.
Supply and Fix,Modular Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and directed.
Supply and Fix,Modular Fan step regulator, 120W - 2 module,complete all as specified and directed.
Supply and Fix,Modular metal flush box 3 module,complete all as specified and directed.
Supply and Fix,Modular metal flush box 6 module,complete all as specified and directed.
Supply and Fix,white cover plate with frame,3 module,complete all as specified and directed.
Supply and Fix,white cover plate with frame,6 module,complete all as specified and directed.
Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size,complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep,Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC),complete all as specified and directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades and frame and louvers,complete all as specified and directed.
Supply and Fix,3 blade wall fan,400 mm sweep with pull cord control for speed and oscillation,Speed:1350 RPM, Air Delivery: 72 CMM (Cubic Metre Per Minute),Power: 55 watts,complete all as specified and directed. [Model “Diva 2010 Wall Fan” of Make ‘Havells’ or equivalent Model of Make ‘Bajaj’/ ’Cromptron Greaves’/’Almonard’/'Orient'/'Usha']
Supply,installation,testing and commissioning of 220VAC–240VAC, PIR (Passive Infra Red) sensor with tigerring mechanism for occupancy and lux,Detection Range:360°, WorkingTemperature:-20℃~+40℃, Ambient Light:<10LUX–2000LUX(Adjustable), Working Humidity:<93%RH,Time Delay:min:10sec±3sec |Max:7min±2min,Installing Height :2.2m~4m,Detection Motion Speed:0.6m/s~1.5m/s,Rated Load:100W (incandescent lamp)|100W(energy-saving lamp and LED),Detection Distance: max. 6m(<24℃),complete all as specified and directed. [Model "Mini PIR sensor” of Make ‘Crabtree’ or equivalent Model of Make ‘Philips’/ ’Cromptron’/ ’Legrand’/ 'Schneider]
Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 4.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn into and including PVC conduit and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 4.00 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for concealed type circuit/sub main wiring,complete all as specified and directed.
Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 4.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn in and including PVC casing & capping and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 4.00 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for circuit/sub main wiring,complete all as specified and directed.
Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 6.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn in and including PVC casing and capping and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 6.00 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for circuit/sub main wiring,complete all as specified and directed.
Supply and Fix,25 mm external dia.,rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, locknuts, saddles, pipe hooks etc., complete all as specified and directed.
Supply and Fix,single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 10 Amps, 240V, complete all as specified and directed.
Supply and Fix,single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps, 240V, complete all as specified and directed.
Supply and Fix, double door, sheet metal enclosure for DBs for mounting of MCB for 240 Volts, 8 way, with 200 Amps rated bus bar, Single Pole & Neutral, complete all as specified and directed.
Supply and Fix, double door, sheet metal enclosure for DBs for mounting of MCB for 415 Volts,4 way,with 200 Amps rated bus bar,Triple Pole and Neutral,complete all as specified and directed.
Supply and fixing,240V,10KA 'B' curve miniature circuit breaker (MCB) of single pole (SP) and current carrying capacity 6 to 32 amp in the MCB DB complete with connection testing and commissioning all as specified and directed.
Supply and fixing,240V,10KA 'C' curve miniature circuit breaker (MCB) of single pole (SP) and current carrying capacity 6 to 32 amp in the MCB DB complete with connection testing and commissioning all as specified and directed.
Supply and fixing,415V,10KA 'C' curve miniature circuit breaker (MCB) of three pole & neutral (TPN) and current carrying capacity 16 to 32 Amp in the MCB DB complete with connection testing and commissioning all as specified and directed.
Supply,installation,testing and commissioning of inverter type Split AC unit 1.5 Ton capacity, indoor & outdoor units with cordless remote control for indoor unit and with in built air ioniser and plasma filter for better indoor air quality with BEE 5 star rating and EER 3.2,operated in single phase AC supply, including necessary interconnection refrigerent copper tubing of required dia. & length duly insulated, condense water PVC rigid piping not less than 19 mm external dia. and 2 mm wall thickness, outer unit stand made out of mild steel including leakage testing duly filed with CFC free refrigerant for fixing of compressor as upto the required pressure as per manufacturer's instructions and including necessary civil work i.e. making hole etc.,PCC work, MS stand/bracket,duly painted and connection etc.,complete all as specified and directed. Notes:- (i) AC refrigerant shall be Non CFC. (ii) Quoted rate shall be deemed to be inslusive of the cost of pipes,cables for connection of out door and indoor unit, fixing bracket for outdoor unit and nothing extra shall be admissible on this account.
Supply and Fix,voltage stabilizer for automatic operation, single phase, naturally air cooled designed for input voltage variation between 140V to 280V with output voltage stabilized at 230V with accuracy of + 2.5%,capacity 4 KVA, complete all as specified and directed.
Materials and Labour for earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanised steel earth lead wire 4 mm dia. by means of bolts, nuts check nuts and washers of galvanised steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia. MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil complete all as specified and indicated on electrical plate No 3 of SSR Part –I (2009) including testing on completion.
M/S N G CHOWDHURY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .