Tenders for Erection of overhead 11/22KV HT line/LT line with Bare Conductor Areal bunch conductor transformer Centres and Service connection in all Scheme for Pandesara Ind Sub Division under Pandesara Division and if required at other Sub division Under Pandesara Division.

3 Estimated Cost Rs.

Tender Fees (Non Refundable) with Rs.1180.00 (As per Clause mentioned

18% GST in Instruction to Bidders Clause No. 9)

Rs.40,000.00 (As per Clause mentioned

5 Earnest Money Deposit in Instruction to Bidders Clause No.

10) Exemption in EMD will not allow..

Date & Place of Pre-Bid Meeting (If

Date : 21.04.2026 on

Last Date of On Line (E-Tendering)

submission of Tender

Time : Up to 18.00 Hrs.

Date : 21.04.2026 on

Last Date of submission of Tender

Fee & EMD (Through online Mode)

Time : Up to 18.00 Hrs.

Date : 22.04.2026 on

Date of opening of Preliminary Stage

(Tender Fee & EMD)

Time : Up to 10.30 Hrs.

Date : 22.04.2026 on

Tentative Date of opening of

Time : Up to 11.00 Hrs.

Date : 23.04.2026 on

Tentative Date of On line Opening of

Time : Up to 16.00 Hrs.

12 Validity of Tender Maximum period of 180 Days

13 Work Completion Period / Time Limit 24 Months (As per quantum of work)

DGVCL GSTIN No. is 24AABCD8912C1Z3.

Every Bidder has to inform their GSTIN No. at the time of payment of applicable fees.

a. Interested Bidders can view these tender documents online. The bidders who are interested in bidding in these tenders can

download tender documents from website https://tender.nprocure.com and www.DGVCL.com

Bidders, who wish to participate in this tender, will have to register on https://tender.nprocure.com Further, Bidders who wish to

File No: DGVCLSDPND/OTH/e-file/4516/2026/0691/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0170/03/2026 Approved Date: 01-04-2026

participate in online tenders will have to procure Digital Certificate as per Information Technology Act-2000 using which they can

sign, their electronic bids. Bidders can procure the same from GNFC, Ahmedabad, who are licensed certifying authority by

Government of India and they will assist them in procuring the same as below mentioned address. Bidders who already have a valid

Digital Certificate need not procure a new Digital Certificate..

n) Code solutions-A SURAT IND DIVISION of GNFC Ltd.,

301, GNFC Info tower, S.G. Road, Bodakdev.

Ahmedabad – 380054 (Gujarat)

Email: [email protected]

b. However, no physical documents required if payment of tender Fee and EMD made through, RTGS & NEFT(upload

receipt online on https://tender.nprocure.com ).

c. Further bidders are requested to submit price bid (Schedule: B) on-line only and not to submit the price bid in physical form.

This is mandatory. If price bid is submitted in physical form, such offer shall be out rightly rejected.

d. It is mandatory for all the bidders to submit their tender documents with all relevant documents as desired in participation of

this bidthrough on-line (e-tendering) in schedule time. If tender documents with all relevant documents submitted in physical

form, in that case the online submitted documents shall be considered.

e. Bidders should be in touch with websites https://nprocure.com&www.dgvcl.com for intimation regarding

revision/corrigendum/Amendment in tender till due date of online submission and thereafter. No separate information

shall be sent in this regards and also not publish in newspaper. The directives and amendments issued

by DGVCL will have superseding effect to relevant section and specifications.

f. Any technical questions, information & clarification that may be required pertaining to this inquiry should be referred to

Executive Engineer SURAT IND DIVISION Office, “Dakshin Gujarat Vij Company Limited”

g. DGVCL reserves the right to reject any OR all tenders without assigning any reasons thereof.

h. Bank Details:

Bank Name: Bank of Baroda

Account Name: DGVCL IND DIV PANDESARA

Account Number:

IFSC Code: BARB0INDPAN

[Note-It is compulsory to mention Tender ID and Bidder name in reference for transaction confirmation

purpose of Tender Fee & EMD. Received online]

If payment make through RTGS/NEFT to the above account then share your UTR No. To the E-Mail ID:

[email protected] Also quote your name & amount paid.

You have to compulsory inform to detail regarding Online payment of tender fee and EMD at This office on E-Mail ID:([email protected])

File No: DGVCLSDPND/OTH/e-file/4516/2026/0691/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0170/03/2026 Approved Date: 01-04-2026

Executive Engineer

DGVCL, PANDESARA DIVISION

Download Tender Documents in (PDF Format) which consists of:

Instructions to Bidder

General Conditions of Contract

Schedule “B” indicating the quantities, rates & items, drawing if any.

Appendix and Annexure

Technical Specifications & GTP’s

To view the PDF file please use “Acrobat Reader” software which can be downloaded from “Adobe

CAPITAL WORK LABOUR RATES FOR FY 2024-25 (WITHOUT GST)

Sub:- Submission of ARC work of Erection of overhead 11/22KV HT line/LT line with Bare Conductor Areal

bunch conductor transformer Center & Service connection in all scheme at Pandesara Ind Sub Division

under Pandesara Division.

Item Code Item Unit QTY FY 2024-25

HT TAPPING FROM THE EXISTING POLE INCLUDING

FIXING OF CROSS ARMS, CLAMPS ANTI-CLIMBING

DEVICES, DANGER BOARD, INSULATORS ETC.

1 9926000001 COMPLETE AND PAINTING OF FABRICATED MATERIALS No.

AND NUMBERING COMPLETE WITH COST OF PAINTS AS

PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.

ERECTION OF PSC POLES OF 8 *200 KG INCLUDING

EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING

OFCROSS ARMS, TOP FITTING CLAMPS ANTI-CLIMBING

DEVICES, INSULATORS ETC. COMPLETE AND PAINTING

OF FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SET AND EARTHING.

File No: DGVCLSDPND/OTH/e-file/4516/2026/0691/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0170/03/2026 Approved Date: 01-04-2026

ERECTION OF STEEL POLES OF 9 TO 11 METERS

INCLUDING EXCAVATION OF PIT AND REFILLING OF

EARTH, FIXING OFCROSS ARMS, TOP FITTING CLAMPS

ANTI-CLIMBING DEVICES, DANGER BOARD,

3 9926000003 INSULATORS ETC. COMPLETE AND PAINTING OF STEEL No.

POLE, FABRICATED MATERIALS USED ON THE POLEAND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SET AND EARTHING.

ERECTION OF STEEL POLE OF 13 METERS FOR

RAILWAY CROSSING ON BG/MG/NG LINE FOR

0.400/11/22KV OVERHEAD LINES I.E INCLUDING

EXCAVATION OF PIT & REFILLING OF EARTH, FIXING

CROSS ARMS, TOP FITTING CLAMPS,ANTI-CLIMBING

4 9926000004 DEVICES DANGER BOARD, INSULATORS ETC. No.

COMPLETE AND PAINTING OF STEEL POLES,

FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COSTOF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF 8 METERS

200 KG PSC POLES INCLUDING EXCAVATION OF PITS &

REFILLING OF EARTHING, FIXING OF CHANNELS,

SUPPORTING ANGLES,CLAMPS, ANTI-CLIMBING

DEVICES DANGER BOARDS,INSULATORS

ETC.COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING

WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SETS AND EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE OF 9 TO

METERS.STEEL POLE INCLUDING EXCAVATION OF PITS

& REFILLING OFEARTH, FIXING OF CHANNELS,

SUPPORTING ANGLES, CLAMPS,ANTI-CLIMBING

DEVICES DANGER BOARDS, INSULATORS

ETC.COMPLETE & PAINTING OF POLES,FABRICATED

MATERIALSUSED ON THE POLES AND NUMBERING WITH

COST OF PAINTSAS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OF GUY SET AND

EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH

MOUNTING OF AB SWITCH, HG FUSES OF 8 MTRS

KG PSC POLES INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH,FIXING OF CHANNELS

SUPPORTING ANGLES, CLAMPS, ANTI-CLIMBING

7 9926000007 DEVICES, DANGER BOARDS, INSULATORS,DOFUSES No.

ETC. COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING

WITH COSTOF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDINGOF ERECTION OF GUY

SET AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH

MOUNTING OF AB SWITCH,HG FUSES, 9 TO 11 METERS

STEEL POLES INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, FIXING OFCHANNEL,

SUPPORTING ANGLES, CLAMPS, ANTI-CLIMBING

8 9926000008 DEVICES , DANGER BOARDS, INSULATORS, ETC. No.

COMPLETE AND PAINTING OF POLES FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING

WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SET AND EARTHING.(WITH AB SWITCH)

File No: DGVCLSDPND/OTH/e-file/4516/2026/0691/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0170/03/2026 Approved Date: 01-04-2026

ERECTION OF DOUBLE POLE STRUCTURES WITH

MOUNTING OFAB SWITCH, HG FUSES, TRANSFORMERS,

LIGHTENING ARRESTORS, DISTRIBUTION BOX. OF

METER,200KG PSC POLE METERS POLES INCLUDING

EXCAVATION OF PITS AND REFILLING OF EARTH,

CARTING OF TRANSFORMERS FROMSTORES TO SITE,

FIXING OF CHANNELS, SUPPORTING

9 9926000009 ANGLES,BRACINGS CROSS ARMS CLAMPS, No.

ANTICLIMBING DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND

PAINTING OF FABRICATED MATERIALS USEDON THE

POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION

OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE WITH

MOUNTING OF AB SWITCH,HG FUSES TRANSFORMERS,

LIGHTENING ARRESTORS, DISTRIBUTION BOX 9 TO

METERS STEEL POLES INCLUDING EXCAVATION OF

PITS & REFILLING OF EARTH CARTING OF

TRANSFORMERS FROM STORE TO SITE, FIXINGOF

10 9926000010 CHANNELS SUPPORTING ANGLES, BRACING, CROSS No.

ARMS,CLAMPS, ANTICLIMBING DEVICES, DANGER

BOARDS,CONDUCTOR AND CABLE WIRING ETC.

COMPLETE AND PAINTING OF POLES FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING AS

PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTIONS OF GUY SETS AND EARTHING.

ERECTION OF GUY SET INCLUDING EXCAVATION OF

PITS & REFILLING OF EARTH AS PER STANDARD

SPECIFICATION WITH STAY CLAMPS, STAY WIRE,

ANCHOR ROD, TURN BUCKLE, EYEBOLT, GUY

INSULATOR, CEMENT CONCRETE BLOCK ETC. BUT

EXCLUDING CONCRETING.

CONCRETING OF POLES, GUYS, ETC. INCLUDING COST

OF CEMENT SAND METAL (1:2:4) AND WATER ETC. AS

PER STANDARD SPECIFICATION.(cement Should be

grade) used for Concreting.

ERECTION OF COIL TYPE EARTHING INCLUDING COST

13 9926000013 OF COAL,SALT ETC. BUT WITHOUT COST OF GI WIRE AS No.

PER STANDARD SPECIFICATION(20kg solt+20kg coal)

ERECTION OF GI PIPE/CI PLATE TYPE EARTHING

INCLUDINGCOST OF COAL SALT ETC. BUT WITHOUT

COST OF PIPE/GIPLATE GI WIRE AS PER STANDARD

SPECIFICATION.(20kg solt+20kg coal)

ERECTION OF STREET LIGHT FIXTURE COMPLETE WITH

CLAMPS, BRASS NIPPLE, BRASS HOLDER TECK WOOD

15 9926000015 BUSH,REFLECTORS FUSE, WIRING ETC. AS PER No.

STANDARD SPECIFICATION BUT EXCLUDING COST OF

STRINGING OF(30mm2)ACSR/34MM@,55MM2 AAA

CONDUCTOR for ALL TYPE OF CONDUCTOR (EXCEPT ONE COND

DOG CONDUCTOR) FOR 11/22KV & LT LINES INCLUDING PER KM

FIXING OF INSULATORS, BINDING JUMPERING ETC.

STRINGING OF GI WIRE 8 SWG INCLUDING BINDING

PROVIDING SINGLE PHASE SERVICE CONNECTION

WITH PVC 2.5/4MM2 TWIN CORE CABLE FROM

TERMINAL POLE TO METERING POINT INCLUDING

FIXING OF METER WITH METER EARTHING COMPLETE

WORK AS PER STANDARD SPECIFICATION BUT

EXCLUDING COST OF MATERIALS.

File No: DGVCLSDPND/OTH/e-file/4516/2026/0691/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0170/03/2026 Approved Date: 01-04-2026

PROVIDING THREE PHASE 4 WIRE SERVICE

CONNECTION WITH PVC 4MM2/10MM2 FOUR CORE

CABLE FROM TERMINAL POLE TO METERING POINT

INCLUDING FIXING OF METER WITH METER EARTHING

COMPLETE WORK AS PER STANDARD SPECIFICATION

BUT EXCLUDING COST OF MATERIALS.

ADDITIONAL COST FOR EXCAVATION OF PIT IN HARD

ROCK AREA FOR ERECTION OF POLE/ GUY ETC. AS PER

STANDARD SPECIFICATION OVER & ABOVE NORMAL

20 9926000020 COST COVERED AGAINST EXCAVATION OF PIT UNDER No.

NORMAL SOIL FOR ERECTION OF POLE,GUY, DOUBLE

POLE STRUCTURE EARTHING WITH THE APPROVAL OF

SUPDT.ENGINEER.

PROVIDING GUARDING TO HT LINE ON ROAD/ RAIL

PROVIDING GUARDING OF LT LINES ON ROAD/RAIL

23 9926000023 LT LINE TAPPING- SINGLE PHASE No.

24 9926000024 LT LINE TAPPING- THREE PHASE No.

Stringing/LAYING OF OVER HEAD LT CABLE FOR ROAD

25 9926000025 CROSSING,HT LINE CROSSING AND TELEPHONE LINE No.

CROSSING ETC.(PER SPAN)

ERECTION OF SINGLE POLE STRUCTURES WITH , HG

FUSES,TRANSFORMERS, LIGHTENING ARRESTOR,

DISTRIBUTION BOX. ON 8 METERS 200 KGAND PSC

POLE INCLUDING EXCAVATION OF PITS AND REFILLING

OF EARTH, CARTING OF TRANSFORMERS FROM

STORES TO SITE, FIXING OF CHANNELS, SUPPORTING

26 9926000026 ANGLES,BRACINGS CROSS ARMS CLAMPS, No.

ANTICLIMBING DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED ON THE

POLE AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION

OFGUY SETS AND EARTHING.

ERECTION OF SINGLE POLE STRUCTURES WITH

MOUNTING OFAB SWITCH , HG FUSES,TRANSFORMERS,

LIGHTENINGARRESTOR, DISTRIBUTION BOX. ON 9 to

METERS RSJ POLE INCLUDING EXCAVATION OF PITS

AND REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROM STORES TO SITE, FIXING OF

27 9926000027 CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS No.

ARMS CLAMPS, ANTICLIMBING DEVICES DANGER

BOARDS, CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLE AND NUMBERING WITH

COST OF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OFGUY SETS AND EARTHING.

ERECTION OF PSC POLES OF 10 *270 KG INCLUDING

EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING

OF CROSS ARMS, TOP FITTING CLAMPS ANTI-CLIMBING

DEVICES, INSULATORS ETC. COMPLETE AND PAINTING

OF FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SET AND EARTHING.

File No: DGVCLSDPND/OTH/e-file/4516/2026/0691/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0170/03/2026 Approved Date: 01-04-2026

ERECTION OF DOUBLE POLE STRUCTURE OF

METERS 270 KG PSC POLES INCLUDING EXCAVATION

OF PITS & REFILLING OF EARTHING, FIXING OF

CHANNELS, SUPPORTING ANGLES,CLAMPS, ANTI-

CLIMBING DEVICES DANGER BOARDS,INSULATORS

ETC.COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING

WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SETS AND EARTHING.(WITHOUT AB SWITCH)

STRINGING OF 100MM2 ACSR/100MM2 AAAC

30 9926000030 CONDUCTOR FOR 11/22KV & LT LINES INCLUDING

FIXING OFINSULATORS, BINDING JUMPERING ETC.

STRINGING OF DOG CONDUCTOR FOR 11/22KV & HT

31 9926000031 LINES INCLUDING FIXING OF INSULATORS, BINDING

ERECTION OF DOUBLE POLE STRUCTURES WITH

MOUNTING OF AB SWITCH, HG FUSES,

TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX. OF 10 METERS 270 KGAND PSC

POLES INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF TRANSFORMERS

FROMSTORES TO SITE, FIXING OF CHANNELS,

SUPPORTING ANGLES,BRACINGS CROSS ARMS

CLAMPS, ANTI-CLIMBING DEVICES,DANGER BOARDS,

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION

OF GUY SETS AND EARTHING.

DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING

OF FABRICATION AT STORE & STACKING OF POLE

SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTALLING OF 10 MTR PSC POLE WITH CREDITING

OF FABRICATION AT STORE & STACKING OF POLE

SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR

PSC POLE) (WITH TRANSFORMER) WITH CREDITING OF

35 9926000035 FABRICATION & TRANSFORMER AT STORE & STACKING No.

OF POLE SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR

PSC POLE) (WITHOUT TRANSFORMER) WITH CREDITING

36 9926000036 OF FABRICATION AT STORE & STACKING OF POLE No.

SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

STRINGING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL

DESIGN SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, LT SHACKLE INSULATOR ETC. FOR FIXING

OF MESSENGER WIRE AND TO PROVIDE SERVICE

CONNECTION ON AERIAL BUNCH CABLE BY INSULATED

PIERCEING CONNECTORS THROUGH SERVICE

CONNECTION BOX COMPLETE AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE.

File No: DGVCLSDPND/OTH/e-file/4516/2026/0691/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0170/03/2026 Approved Date: 01-04-2026

STRINGING OF LT ABC OF 3*50 SQ MM +1*25 SQ

MM+1*35 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION /

TENSION CLAMP, FIXING OF CROSS ARM, LT SHACKLE

38 9926000038 INSULATOR ETC. FOR FIXING OF MESSENGER WIRE KM

AND TO PROVIDE SERVICE CONNECTION ON AERIAL

BUNCH CABLE BY INSULATED PIERCEING

CONNECTORS THROUGH SERVICE CONNECTION BOX

COMPLETE AS REQUIRED & DIRECTED BY ENGINEER IN

STRINGING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL

DESIGN SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, BINDING TO PIN INSULATOR,PREPARING

SHACKLE POINT,JUMPERS ETC. AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE

STRINGING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL

DESIGN SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, BINDING TO PIN INSULATOR,PREPARING

SHACKLE POINT,JUMPERS ETC. AS REQUIRED AND

DIRECTED BY ENGINEER IN CHARGE

STRINGING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+

SQ MM INCLUDING FITTING OF ALL ACESSARIES I.E.

SPECIAL DESIGN SUSPENSION / TENSION CLAMP,

FIXING OF CROSS ARM, LT SHACKLE INSULATOR ETC.

41 9926000041 FOR FIXING OF MESSENGER WIRE AND TO PROVIDE KM

SERVICE CONNECTION ON AERIAL BUNCH CABLE BY

INSULATED PIERCEING CONNECTORS THROUGH

SERVICE CONNECTION BOX COMPLETE AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE.

DISMENTALING OF RSJ (9/11 METER) POLE AND

CREDITING THE OLD MATERIAL TO STORE

DISMENTALING OF TRANSFORMER CENTER ON

10MTR,270KG PSC POLE(WITHOUT TRANSFORMER)

43 9926000043 WITH CREDITING OF FABRICATION AT STORE AND No.

STACKING OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

DISMENTALING OF TRANSFORMER CENTER ON

10MTR,270KG PSC POLE(WITH TRANSFORMER) WITH

44 9926000044 CREDITING OF FABRICATION AT STORE AND STACKING No.

OF POLE SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTLING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM

45 9926000045 AND CREDITING FITTING OF ALL ACESSARIES AND KM

FABRICATION TO DEPARTMENTAL STORE

DISMENTLING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM

46 9926000046 AND CREDITING FITTING OF ALL ACESSARIES AND KM

FABRICATION TO DEPARTMENTAL STORE

DISMENTALING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM

AND CREDITING FITTING OF ALL ACESSARIES TO

DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 3*50 SQ MM +1*25 SQ

MM+1*35 SQ MM AND CREDITING FITTING OF ALL

ACESSARIES TO DEPARTMENTAL STORE.

File No: DGVCLSDPND/OTH/e-file/4516/2026/0691/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0170/03/2026 Approved Date: 01-04-2026

DISMENTALING OF LT ABC OF 2*50 SQ MM +1*25 SQ

MM+ 35 SQ MM AND CREDITING FITTING OF ALL

ACESSARIES TO DEPARTMENTAL STORE.

RESTRINGING OF ALL TYPE OF CONDUCTOR (EXCEPT

50 9926000050 DOG CONDUCTOR) FOR 11/22KV & LT LINES INCLUDING

FIXING OF INSULATORS, BINDING JUMPERING ETC.

RESTRINGING OF DOG CONDUCTOR FOR 11/22KV HT ONE COND

LINES INCLUDING , BINDING JUMPERING ETC. PER KM

LABOUR CHARGE FOR THE INSTALLATION OF NEW DTR

METER. (METER WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR THE REPLACEMENT OF DTR

53 9926000053 METER AND OLD METER SHOULD BE CREDITED TO SDN No.

STORE. (METER WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR PROVIDING CT COIL FOR DTR

54 9926000054 METER CONNECTION. (CT COIL WILL BE PROVIDED BY PER CT

LABOUR CHARGE FOR REPLACEMENT OF CT COIL FOR

DTR METER CONNECTION AND OLD CT SHOULD BE

CREDITED TO SDN STORE. (CT COIL WILL BE PROVIDED

LABOUR CHARGE FOR FIXING OF MMB FOR DTR METER

(MMB WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR REPLACEMENT OF DTR METER

BOX. (METER WILL BE PROVIDED BY DGVCL)

PROVIDING / REPLACEMENT OF 1.5 SQ MM 10 CORE

58 9926000058 COPPER CABLE 3.5 METER (CABLE TO BE PROVIDED BY No.

LABOUR CHARGE FOR PROVIDING/RECONNECTION OF

59 9926000059 TERMINAL CONNECTION WITH PROPER SIZE OF LUGS.

(LUGS COST IS BORNE BY AGENCY)

LABOUR CHARGE FOR THE SPOT READING OF DTR

METER WITH DETAIL SURVEY OF DEFECT IF ANY. A

DULY SIGN COPY BY SURVEYOR PERSON OF AGENCY

60 9926000060 IN PRO-FORMA REPORT SHOULD BE SUBMITTED TO PER DTR

SDN OFFICE.(* ONLY IF ALL PARAMETER OF VOLTAGE,

CURRENT & LOAD AS SHOWN IN PER-FORMA IS FILLED)

AS PER THE INSTRUCTION OF ENGINEER IN-CHARGE.

LABOUR CHARGE FOR THE SPOT READING OF DTR

METER WITH DETAIL SURVEY OF DEFECT IF ANY. A

DULY SIGN COPY BY SURVEYOR PERSON OF AGENCY

61 9926000061 IN PRO-FORMA REPORT SHOULD BE SUBMITTED TO PER DTR

SDN OFFICE. (DULY FILL PER-FORMA IN FAULT

CONDITION IN WHICH READING PARAMETER IS NOT

SHOWN IN METER)

INSTALLATION OF DTR METER INCLUDING METER BOX,

PROVIDING & FIXING OF 1.5SQ MM SINGLE STRAND

62 9926000062 CORE ARMOURED COPPER CABLE (3.5METER), No.

TERMINATION IN METER & COIL ETC.(METER, METER

BOX, C.T./P.T. COIL WILL BE PROVIDED BY DGVCL)

INSTALLATION OF DTR METER INCLUDING METER BOX,

TERMINATION IN METER & COIL ETC. (WITHOUT 10CORE

COPPER CABLE) (METER, METER BOX, C.T./P.T. COIL

WILL BE PROVIDED BY DGVCL)

Binding of messanger Conductorat with a distance not more

64 9926000064 than 0.75 mtr with 6 turns minimum on XLPE Cable with single No

strand binding wire (including cost of binding wire)

File No: DGVCLSDPND/OTH/e-file/4516/2026/0691/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0170/03/2026 Approved Date: 01-04-2026

Supply and Installation of 11/22 kV Distribution Transformers

HT Terminal protector (UV Resistance) with using 95/120/150

sq.mm long barrel aluminum lug. (1Set = 3 Nos i.e. on R, Y,

Supply & Installation of HT EPR Tap on 11/22 kV Distribution

Transformer with replacement of bare conductor by HT ABC

66 9926000087 conductor (DO bottom side to transformer) after removal of PER SET

semi conductor by HT ABC (6 inch both side). HT ABC to be

supplied by DGVCL. (1Set = 3 Nos i.e. on R, Y, B)

Supply, Installation, Testing and Commissioning of

Maintenance Free, Ready Capsule, Pipe-In-Cage (Pic) Type,

67 9926000088 Earth Electrodes for HT Feeder Pole Having 2000 mm NO

Electrode Length as per the Tender Specifications and

Drawing. (All Materials Will Be Supplied By Agency)

Supply, Installation, Testing and Commissioning of

Maintenance Free, Ready Capsule, Pipe-In-Cage (Pic) Type,

68 9926000089 Earth Electrodes for HT Feeder Pole Having 3000 mm NO

Electrode Length as per the Tender Specifications And

Drawing. (All Materials Will Be Supplied By Agency)

Supply and Installation of 25 X 3 mm GI Strip having hot dip-

galvanized-zinc coating of 80-100 microns without any joints

or welding. Both the end of the GI strip should be connected

with GI nut bolts and required fabrication work for giving

separate earthing connections to

(1) Neutral of the transformer

(2) MS structures of the transformer center (Approximately

meter GI strip per transformer centre

- as per requirement and instruction of Engineer in- charge)

(All Materials will be supplied by Agency)

Supply and Installation of uPVC standard make Pipe of 1.25"

diameter for covering GI strip with UV protected Cable Ties of

70 9926000092 550 X 7.6 mm size to bind with pole face(Approximately 25 Meter

meter uPVC pipe for GI strip covering per transformer centre -

as per requirement and instruction of Engineer in-charge.

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to

Drop out Fuse and Drop out fuse to Transformer H.T.

including Busbar (12 mm sleev) as per technical specification.

(All Materials will be supplied by Agency)

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to

Drop out Fuse and Drop out fuse to Transformer H.T.without

Busbar(12 mm sleev) as per technical specification. (All

Materials will be supplied by Agency)

Supply & fixing of upto 33 kV Conductor sleeve for Busbar to

Drop out Fuse and Drop out fuse to Transformer H.T.

including Busbar(15 mm sleeve) as per technical specification.

(All Materials will be supplied by Agency)

Supply & fixing of upto 33 kV Conductor sleeve for Busbar to

Drop out Fuse and Drop out fuse to Transformer H.T. without

Busbar(15 mm sleeve) as pertechnical specification. (All

Materials will be supplied by Agency)

Supply & fixing of Disc type Red Color FRP(Non-flammable)

material with Weather resistant, Non-conductive bird guard

OD=300 MM, ID=33 MM, Width =1.25 MM, one side cut from

ID to OD. (All Materials will be supplied by Agency)

Providing and fixing of LT Terminal protectors i.e. Re-useable

boot (LT Side 1.1 kV) including LT (1.1 kV) insulating taps. All

live part at LT side shall be covered with fixing of LT insulating

77 Nylon Net around Transformer Center

78 9926000097 Nylon Net (12 * 15 ft) Per Net

File No: DGVCLSDPND/OTH/e-file/4516/2026/0691/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0170/03/2026 Approved Date: 01-04-2026

79 9926000098 Nylon Dori Per TC

Labour charge for fitting Nylon Net (All fabricated material for

fitting nylon net shall be provided by DGVCL)

81 9924000001 Cutting of Tree branches surounding HT/LT line Per Tree

Replacement of old jumpers & providing new double jumpers

with 8" binding [D Type] & capsuling with PVC pipe etc

83 9924000005 Support pole for Stay PSC/STP/RSJ No.

84 9924000006 Pin binding of conductor 11/22kv Pin insulator No.

Pin binding of conductor 11/22kv Pin insulator per pole in

costle area with cleaning .

86 9924000008 Pin binding of conductor LT shakel insulator No.

87 9924000009 Replacement of one/both disc.insulator at strain pole No.

88 9924000010 Replacement of LT shackle insulator at cut point No.

89 9924000011 Refixing of V cross Arm No.

90 9924000012 Replacement of V cross Arm (With Transportation & Painting) No.

91 9924000013 Refixing of Top fitting in proper position No.

92 9924000014 Replacement of Top fitting No.

93 9924000015 Replacement of LT cross Arm No.

Providing DO fuse on DP with carting & jumpuring(ONE DO

Numburing of pole with paint by preparing back ground of one

colour and have lettering(height 3" * width 0.5") using stensil

96 9924000018 Fixing of MMB(1PH.) at consumer end No.

97 9924000019 Fixing of MMB(3PH.) at consumer end No.

98 9924000020 Replacement of (1ph.) meter for Urban area No.

99 9924000021 Replacement of (1ph.) meter for Rural area No.

painting consumer no. on MMB (Urban) (with letter size height

40mm* width 8mm)

painting consumer no. on MMB (Rural) (with letter size height

40mm* width 8mm)

102 9924000024 Replacement of deteriorated Single phase Service line No.

Fixing of new dist. Box with complete wiring including

clamps,nut bolts etc.

Reparing of guarding involving reshaping of bearer wire cross

lacing binding etc.

Painting of steel fabricated material of RSJ DO DP structure

Painting of steel fabricated material of RSJ pole mounted

transformer double pole structure with paint

Painting of steel fabricated material of RSJ single pole with

painting of steel fabricated material of PSC Single pole (HT

line) with paint

painting of steel fabricated material of PSC DO DP double

pole with paint

painting of steel fabricated material of PSC double pole at

pole mounted transformer with paint

111 9924000033 Providing line seperater single phase No.

112 9924000034 Providing line seperater three phase No.

Replacement / Providing of stay insulator along with

adjustment of tension in stay wire

Replacement of deteriorated /providing LT dist. Box with new

up to 100KVA capacity & crediting it to store.

File No: DGVCLSDPND/OTH/e-file/4516/2026/0691/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0170/03/2026 Approved Date: 01-04-2026

Replacement of deteriorated /providing LT dist. Box with new

above 100KVA capacity & crediting it to store.

116 9924000038 Adjustment of tension in stay wire No.

117 9924000039 Refitting of LA No.

Converting pin point to Shackle point including dismentaling &

118 9924000040 location

restringing etc.

replacement of 11KV Pin insulator with providing new double

replacement of 22KV Pin insulator by new 11kv pin insulator

with spares & providing new double pin binding

Providing 11kv double disc insulators with binding &

Replacement of existing 11kv conductor (all size) with new

double pin binding

123 9924000046 Plumbing of PSC Pole with straightening at pin point No.

124 9924000047 Plumbing of PSC Pole with straightening at tension point No.

Plumbing of tilted DP structure (PSC/RSJ/STP) with refilling of

stone Murrum etc.

Providing new 11kv AB /GO switch with fabrication and

insulated colour code jumper, binding, lugs etc

Replacement of old 11kv AB /GO switch with providing new

insulated jumper, binding, lugs etc

Providing cage type loop guard in verticle LT line with using

128 9924000052 per pole

PVC reel insulators etc

Labour charges for replacement /providing of MMB & service

with all accessories for three phase connection

Labour charges for replacement /providing of MMB & service

with all accessories for single phase connection

Dismentalling of existing Dist.X'mer center(RSJ /STP POLE)

131 9924000055 25/63/100/200 KVA with all fabrication & creditig the old No.

material to store

132 9924000056 Disconnection from LT pole 1 phase No.

Reconnection from LT pole 1 phase

( payment after receipt of R/C charges)

134 9924000058 Disconnection from LT pole 3 phase No.

Reconnection from LT pole 3 phase

( payment after receipt of R/C charges)

Dismentaling & removing of service line from pole & crediting

Dismentaling & removing of service line from pole & crediting

138 9924000062 Reconnection of service line complete with PVC cable (1 Ph) No.

139 9924000063 Reconnection of service line complete with PVC cable (3 Ph) No.

Providing spiral type earthing by G.I. NO 8(weight 2kg -5mtr in

length) with salt and coal 10kg each, including pvc rigid pipe

140 9924000064 20mm dia( 1.5mtr length) to pass exposed part of G.I. wire at No.

consumer end with all materials, earth resistance should be

less than 2 ohms

File No: DGVCLSDPND/OTH/e-file/4516/2026/0691/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0170/03/2026 Approved Date: 01-04-2026

Providing and fixing of signle core 1.5 sq mm single strand

copper insulated cable with cable nail clip for spiral type

earthing at consumer end. The end of G.I. no 8 is to be

connected by connector with copper cable of which other end

141 9924000070 per meter

shall be connected to the earth terminal of meter box. This

item shall be used in location where there is more distance

between earth terminal and earthing terminal of meter. (All

materials supplied by contractor)

Stringing of LT ABC of 1*35 SQ MM + 1*25 SQ MM including

fitting of all acessaries i.e. special design suspension / tension

clamp, fixing of cross arm, LT shackle insulator etc. for fixing

of messenger wire and inclusive of dismantling charge of

existing bare conductor and crediting in to store &

dismentaling of service line from LT bare conductor and to

provide service connection on Aerial Bunch Cable by insulated

pierceing connectors through service connection box

complete as required & directed by Engineer in Charge.

Stringing of LT ABC of 3*50 SQ MM +1*25 SQ MM+1*35 SQ

MM including fitting of all acessaries i.e. special design

suspension / tension clamp, fixing of cross arm, LT shackle

insulator etc. for fixing of messenger wire and inclusive of

dismantling charge of existing bare conductor and crediting in

to store & dismentaling of service line from LT bare conductor

and to provide service connection on Aerial Bunch Cable by

insulated pierceing connectors through service connection box

complete as required & directed by Engineer in Charge.

Stringing of 11KV ABC of 3*95 SQ MM +80 SQ MM including

fitting of all acessaries i.e. special design suspension / tension

clamp, fixing of cross arm, binding to pin insulator,preparing

shackle point,jumpers etc. and inclusive of dismantling charge

of existing bare conductor and crediting in to store complete

as required & directed by Engineer in Charge

Stringing of 22 KV ABC OF 3*70 SQ MM +95 SQ MM

including fitting of all acessaries i.e. special design suspension

/ tension clamp, fixing of cross arm, binding to pin

145 9924000068 insulator,preparing shackle point,jumpers etc. and inclusive of KM

dismantling charge of existing bare conductor and crediting in

to store complete as required & directed by Engineer in

Stringing of LT ABC of 2*50 SQ MM +1*25 SQ MM+ 35 SQ

MM including fitting of all acessaries i.e. special design

suspension / tension clamp, fixing of cross arm, LT shackle

insulator etc. for fixing of messenger wire and inclusive of

146 9924000069 dismantling charge of existing bare conductor and crediting in KM

to store & dismentaling of service line from LT bare conductor

and to provide service connection on Aerial Bunch Cable by

insulated pierceing connectors through service connection box

complete as required & directed by Engineer in Charge.

Rs Twenty Five Lakh Only TOTAL

File No: DGVCLSDPND/OTH/e-file/4516/2026/0691/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI

Letter No: DGVCLSDPND/0170/03/2026 Approved Date: 01-04-2026

Note: 1.DGVCL will provide key material like M.S.

materials,ABC/Bare conductors,PSC/RSJ

Poles,Insulators,Fabricated

materials etc. to the contractor.

2.All fabricated items shall be fabricated as per DGVCL

approved drawing and by welding rods confirming to the

relevent ISI specification and as directed by Engineer in

3.Necessary electricity connection for fabrication items shall

be provided by DGVCL on payment of required charge for

connection & electricity bill of the same shall be paid by the

4.All the rates are inclusive of PF & Exclusive of GST

applicable time to time.

5.All steel material are to be painted as below:

(a) Scrubbing of rusted surface properly before applying the

paints on to the RSJ poles & steel fabricated materials of

RSJ/PSC poles is must required.

(b) Two coats of approved ISI mark red oxide (primer) is to be

properly painted for the RSJ poles & steel fabricated materials

of RSJ/PSC poles.

(c) Two coats of approved ISI mark silver paint (i.e. triple

mangoes or equivalent quality silver paint) is to be properly

painted on to the RSJ poles & steel fabricated materials of

EXECUTIVE ENGINEER (O&M)

DGVCL, PANDESARA DIVISION,

File No: DGVCLSDPND/OTH/e-file/4516/2026/0691/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTI