Providing Fire Fighting System at Adarsh Nivasi Shala Building and Hostel Building at Jhagadia, Tal. Jhagadia, Dist. Bharuch(2nd Attempt).

Name of work : Providing Fire Fighting System at Adarsh Nivasi Shala Building and

Hostel Building at Jhagadia, Tal. Jhagadia, Dist. Bharuch.

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

1 Supply. installation, testing & commissioning of ISI approved 3.00 No 98432.21

electrical motor driven jockey pump set having 10.8 m3/hr. @

70m head. The pump unit shall be a horizontally direct

mounted motor. Unit shall comprise the following minimum

requirements: a) Pump, b) Electric motor IE2, c) Foundation

bolts, d) Mating flanges with gasket and fasteners, e)

Discharge gauges, etc. complete in all respect, with labour.

2 Supply, installation, testing & commissioning of Priming tank, 2.00 No 25677.97

HDPE type, 1000 litres, with necessary piping 100 mm size, G.I

pipe for priming the pumps, pipe of with butterfly valves for

isolation, Water Filling to priming tank by piping min. 50 mm

size, with all complete.

3 Supply, installation, testing & commissioning of Manifold( 1.00 No 55635.60

surge vessel,)for fire hydrant system, min. 300 mm diameter,

made from M.S plate, hydro tested to 15 kg./cm2. with ball

valves, header with couplings for fitting pressure switches,

pressure gauges etc.with necessary isolation valves with all

Supply, fabrication & erection of aboveground G.I. 'C'-Class,

ERW piping, conforming to IS:1239, part-I, Heavy class up to

150 mm dia. and IS:3589, for size 200 mm dia. & above,

thickness. G.I. pipe fitting's as per IS: 1239, part-II, Heavy class

for size 150 mm dia. & below & IS: 3589, for size 200 mm dia.

above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe

hangers, etc. Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc. Painting for piping, fittings &

structural pipe support, shall be two coat of zinc primer and

two coats of fire red conf. to IS: 5, Shade 536. Complete with

all accessories as per approved drawings, specicification and

direction of the Engineer-in-Charge, with all complete.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

Supply, installtion, testing & commissioing of Underground GI

(ERW) piping conforming to IS:1239, part-I, Heavy class ('C'

class) up to 150 mm dia. and IS:3589 Heavy class ('C' class), for

200 mm dia. & above, min. 6.35mm thickness including Heavy

class fittings, anti-corrosive tape of size 150 mm wide x 4 mm

thick, wrapping & coating with 13KV holiday testing . Rates

shall include sand bedding of 75mm dia all around, backfilling

of the excavated including installation of heavy pipe fitting's,

flanges, etc. 10 % of all the welded joints shall be done

radiographically tested and 50% of the joints radiographed

shall be the "Field Joints". Hydrostatic testing for 2 hours at

150% of the system pressure, hook-up etc., complete with all

accessories as per approved drawings, specicification and

direction of the Engineer-in-Charge, with all complete. (Road

12 Design , Supply and installation of Safety Signage made of Zinc 4800.00 Sq. 9.41

Sulphilde based glow in dark , Rigid sheet with High Luminous inch

property enclosed in a transperent weather proof UV

stabilized plastic pasted on 3 mm thick clear acrylic sheet such

as EXITS, EMERGENCY EXIT, DO NOT USE LIFT DURING FIRE,

FLOOR MARKINGS, FIRE LIFT, STAIRCASE EXIT, FIRE ALARM

CALL POINT, FIRE HOSE REEL, FIRE HYDRANT POINT etc.

13 Supply, Installtion, Testing & Commissioing of Standard 10.00 No 556.36

Response Sprinkler, Pendent Brass Sprinkler, Quartzoid Bulb

type with crome finish, nickel crome platde, K factor K-80,

Temp.- 680C, 1/2" end connection including resessed

escutcheon. (UL Listed).

14 Supply, installation, testing & commissioning of pressure 3.00 No 2824.58

switch. (Range 0 to 16 kg/cm2)

15 Supply, installation, testing & commissioning of 150 mm dia. 7.00 No 2738.98

dial Burdon Type Glycerine Filled pressure gauge with

isolation ball valve arrangements with necessary isolation

valves with all complete.( Range 0 to 15 kg/cm2)

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

Supply, installation, testing & commissioning of Cast iron body

double flanged gate valve With Rising Spinldle conf. to IS:

14846, PN-1.6 with mating flanges, drilling as per IS/ANSI

150# with mating flanges, galvanized nut, bolts & washers,

gasket 3 mm thick, etc., with all complete.

Supply, Installation, Testing & Commissioning of Cast iron

body Butterfly valve according to IS: 13095, PN-1.6, Iron Disc

for size 150 mm dia. & below Lever operated and above

mm dia. Gear operated complete with mating flanges /ANSI

class # 150 with bolts & nuts washers, rubber gaskets 3 mm

thick, etc., with all complete.

Supply, installation, testing & commissioning of Cast iron

body Dual Plate Wafer Type NRV conf. to IS: 210, PN-1.6

complete with mating Flanges class # 150 with bolts & nuts,

washers, gaskets 3 mm thick, etc., with all complete

Supply, installation, testing & commissioning of SG iron body

SinglePlate Wafer Type NRV conf. to ASTMA 536, PN-1.6

complete with mating Flanges class # 150 with bolts & nuts,

washers, gaskets 3 mm thick, etc., with all complete.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

Supply, installation, testing & commissioning of Y Type

Strainer complete with mating flanges with bolts & nuts,

washers, gaskets 3 mm thick, etc., with all complete

Supply, installing, testing and commissioning of Normax make

CI heavy duty ball type foot valve with flanges, nut bolts,

gaskets etc. with necessary complete accessories.

37 Supply, installation, testing & commissioning of Four way fire 1.00 No 8987.29

brigade Inlet connection with 63 mm dia. stainless steel

(SS304) instantaneous male inlets with built in non return

valve in each inlet with 150 mm dia. header pipe, suitable

rubber cap and GI chain including nuts, bolts, washers, gasket

3 mm thick, etc. with all complete.

38 Supply, installation, testing & commissioning of Two way fire 2.00 No 5135.59

brigade Inlet connection with 63 mm dia. stainless steel

(SS304) instantaneous male inlets with built in non return

valve in each inlet with 100 mm dia. header pipe, suitable

rubber cap and GI chain including nuts, bolts, washers, gasket

3 mm thick, etc. with all complete.

39 Supplying FIRE bucket round bottom of 9 liters capacity made 16.00 No 1027.12

out of 24 gauge G.I Sheet with extra handle at bottom duly

painted white inside and Red out side with FIRE mark. Filled

with dry-sand and kept on existing stand provided or hung on

40 Supplying and erecting floor mounting Stand for keeping four 4.00 No 5563.55

nos. of FIRE buckets comprising 1500 mm in length, 900 mm

height frame made out of 30mm x 30 mm x 4 mm angle iron

with cross supports legs, welded with 4 hooks and duly

painted with one coat of primer and two coats of approved

enamel P O red paint.

41 Supply & installation of stainless steel body Orifice Plate of 14.00 No 1069.91

suitable inner bore along with matching flange - as per

specification & requirement as per hydraulic calculation.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

42 Providing and fixing approved make Perforated C type cable 15.00 Mtr 471.67

tray. Made from pre- galvanized sheet steel. The cable tray

should be bended as per IS 2062/1079 . with max 17.5%

perforation with coupler plate / Fish plate and GI hardware

like nut - bolt and washers etc. erected on existing support as

per Specification and as per instruction of engineer in

charge..(5) 300 X 50 X 1.5 mm Thick

43 Providing and fixing approved make Perforated C type cable 15.00 Mtr 322.19

tray. Made from pre- galvanized sheet steel. The cable tray

should be bended as per IS 2062/1079 . with max 17.5%

perforation with coupler plate / Fish plate and GI hardware

like nut - bolt and washers etc. erected on existing support as

per Specification and as per instruction of engineer in

charge..(3) 150 X 50 X 1.5 mm Thick

44 Supply, installation, testing & commissioning of Oblique 20.00 No 5435.17

pattern type stainless steel (SS 304) single headed External

Fire Hydrant Valve with 63 mm dia. female instantaneous

outlet conf. to IS: 5290, type - A, including mating flanges,

galvanised nuts, galvanised bolts/studs, washers & gaskets

mm thick with all complete.

45 Supply, installation, testing & commissioning of 63 mm dia. 20.00 No 1754.66

stainless steel (SS 304) Universal Branch Pipe conf. to IS:

46 Supply & installation, testing & commissioing of Fire Fighting 20.00 No 6967.29

Hose - conf. to IS : 636, type B (type- 3), The fire hose shall be

15 m long with 63 mm dia. stainless steel (SS 304) couplings

conf. to IS: 903, at both the ends for connection with the

hydrant valve and the branch pipe.

47 Supply, installation, testing & commissioning of fabricated 20.00 No 2525.00

from 3 mm MS sheet, hose box of size-450 mm x 600 mm x

250 mm - painted with Fire Red as per IS: 5, shade no.

front 3 mm thick transparent glass with lock & key, handle and

brass hinges - to accommodate one number of 15 mtr long

hose and one number of universal branch pipe, including

supporting arrangement with civil work.

48 Supply, Installation, testing & commissioing of Swinging type 20.00 No 7403.82

mild steel hose reel drum with 20 mm dia. x 30 mtr. rubber

hose as per IS: 884. The mounting stand shall be of mild steel

and the hose shall be fitted with a SS shut-off nozzle & SS ball

valve of 25 mm dia. including supporting arrangement with all

complete. accessories

49 Supplying, fixing & testing of of CI ball Valve 25mm dia. 38.00 No 706.14

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

Supplying, fixing & testing of New Battery of diesel engine

Supply and installation of Diesel Tank For Diesel Engine With

All Accessories

52 Supplying, filling & testing lube oil for diesel engine 15.00 Ltrs 320.98

53 Supply and commissioning of Oil Filter. 1.00 No 706.14

54 Supplying, filling of diesel in diesel engine tank 50.00 Ltrs 89.87

55 Supply and commissioning of Diesel Filter 1.00 No 427.97

56 Supplying, filling & testing coolant to engine cooling for 20.00 Ltrs 239.66

57 Excavation for foundation upto 1.5 m depth including sorting 10.00 Cu. 117.08

out and stacking of useful materials and disposing off the Mtr

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

58 Filling Of Gaps Between pipe and Core Cutting Hole With 20.00 No 299.58

Chemical and Cement

59 Steel work, welded in built up sections framed work including 450.00 Kg 90.48

cutting, hoisting, fixing in position and applying a priming coat

of read lead paint & two coat oil paint. (A)In beams and joists,

channels angles Tees, flats, with connecting plates or angle

cleats as in main and cross beams. Hip and jack rafters, purlins

conneted to common rafters and the like.

60 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured 65.00 Mtr 136.35

copper cable 1.1 KV grade to be erected as directed of

following size. (E) 3 core 2.5 Sq. mm for pressure switch

61 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 65.00 Mtr 285.83

multistrand Copper conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe at road

crossing or floor of following size of cable. (Only Fire Panel to

Fire Pump) (B) 3 core 4 Sq. mm

62 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 105.00 Mtr 497.93

multistrand Copper conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe at road

crossing or floor of following size of cable. (Only Fire Panel to

Fire Pump) (D) 3 core 10 Sq. mm (Only Fire Panel to Fire

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

63 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 70.00 Mtr 213.11

multistrand Copper conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe at road

crossing or floor of following size of cable for Diesel Engine

Battery Charger (A) 3 core 2.5Sq. mm

64 Supply, Filling and Fixing of approved make ABC type fire 32.00 No 1968.64

extinguisher - 6 Kg. Capacity as per IS:15683 & IS :

65 Supply, Filling and Fixing of approved make CO2 type fire 32.00 No 5520.76

extinguisher. Capacity 4.5 Kg. (conforming to IS-15683).

66 Supply, Filling and Fixing of approved make ABC Moduler type 5.00 No 3423.73

automatic fire extinguisher. Capacity 5 Kg. (conforming to IS-

67 Submitting the application to obtain Fire Plan Approval and 3.00 No 166650.00

After Completion of Work Obtain Final Fire NOC for 3 Year.

68 Supply, Installation and commissioning of Air Release Valve, 3.00 No 1412.29

25 mm Dia. connection.

69 Supply, Installation and commissioning of Fire Alarm Panel 3.00 No 21398.30

Conventional type, 4 zone, with complete accessories.

70 Supply, Installation and commissioning of smoke detectors / 10.00 No 1027.12

heat detectors, with complete accessories.

71 Supply, Installation and commissioning of plug in base for the 10.00 No 256.78

smoke detectors, hooters, with complete accessories.

72 Supply, Installation and commissioning of Audio hooters , with 24.00 No 1069.91

complete accessories.

73 Supply, Installation and commissioning of Manual Call Points, 24.00 No 1010.00

with complete accessories.

74 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 1150.00 Mtr 176.75

multistrand Copper conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of

following size of cables (A) 2 core 2.5 Sq. mm for Fire Alarm

Core cutting in wall and in RCC slab with size as below:

75 50 mm dia. Hole 35.00 No 342.37

76 80 mm dia. Hole 10.00 No 427.97

77 100 mm dia. Hole 10.00 No 513.55

78 150 mm dia. Hole 4.00 No 599.15

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

80 Supply, installation, testing & commissioning of ISI approved 1.00 Set 176750.00

electrical motor operated Kirloskar make fire hydrant main

pump set horizontal end suction back pull out top discharge

centrifugal fire pump set with all the standard acessories, base

frame, coupling, and foundation bolts with following

Model -DB 80/26,

Motor Rating -30KW/40HP/3 ph

Suc x Del - 80 x

81 Supplying, Installation, Testing and commissioning of Kirloskar 1.00 Set 414100.00

make diesel engine driven fire hydrant pump set suitable for

automatic operation and consisting of following: horizontal

type, centrifugal end suction back pull out, top discharge

pump of cast iron body & bronze impeller with m.s.fabricated

common base plate, coupling, coupling guard, foundation

bolts etc.,as required.

Engine - 39 BHP / 3 ph

Suc x Del - 100 x

82 Fire Hydrant Panel suitable for 10 hp Jockey pump, 40 hp (97 3.00 No 103323.00

m3/hr @ 70 m head) main electrical pump and 39 Bhp (97

m3/hr @ 70 m head) Diesel engine operated pump

R Y B Indication - 1 Set

VAF Digital Meter - 1 Set

F1 40 HP Star Delta Starter - 1 For Main pump

F2 10 HP DOL Starter - 1 For Jockey Pump

F3 Auto - On / Off Diesel Pump With Battery Charger

Control Circuit With Auto - Manual On/Off

On/Off Trip Indication

On/Off Push Button

Dully Powder Coated PO Red Colour,

Fabricated From 14/16 SWG,GI Sheet , IP-42 Protection,-Fixed

Type Floor Mounted

Cable Entry : Bottom

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

83 Pay Legal Fees to Concern Authority for Obtaining Plan 8560.00 Sqm 10.10

Approval and Final NOC

84 Excavation for foundation for depth from 1.5 m to 3.0 m 50.40 Cu. 162.38

including sorting out and stacking of useful materials and Mtr

disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil.

85 Providing and laying controlled cement concrete M150 for 5.00 Cu. 3830.93

curing complete including cost of formwork but excluding Mtr

the cost of reinforcement for reinforced concrete work in

86 Providing and laying ordinary cement concrete 1:2:4 (1- 3.50 Cu. 5065.15

Cement 2- coarse sand : 4-graded stone aggregates 20 Mtr

mm nominal size) exposed work with curing etc,

complete including the cost of formwork but excluding the

cost of reinforcement for R.C.C work in (iv) Slabs having

more than 13 cm and upto 15 cm. thickness.

87 Providing and laying controlled cement concrete M-200 14.00 Cu. 5231.80

and curing complete including the cost of form work but Mtr

excluding the cost of reinforcement for reinforced

concrete work in Plinth Slab.

88 Providing and laying controlled cement concrete M-200 4.00 Cu. 5231.80

and curing complete including the cost of formwork and Mtr

excluding reinforcement for reinforced concrete work in

(C) Ground floor Slab.

89 Providing and laying controlled cement concrete M.200 2.00 Cu. 6412.49

and curing complete including the cost of formwork and Mtr

excluding reinforcement for reinforced concrete work in

(C) Ground floor Beams.

90 Brick work using common burnt clay building bricks 12.00 Cu. 4289.47

having crushing strength not less than 35 kg./Sq.Cm. in Mtr

foundation and plinth in Cement Mortar 1:5 (1- Cement:

-fine sand) (B) Conventional For GF.

91 Providing 15mm thick cement plaster in single coat on 12.00 Sq. 218.01

Rough (Similar)side of single or half brick walls for Mtr.

interior plastering upto floor two level and finished even

and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand).

92 Providing and laying antiskid ceramic tiles 30 x 30 cm 21.00 Sq. 957.63

size 6 mm thick in flooring treads of steps and landing Mtr.

laid on a bed of 12 mm thick cement mortar l:3(l-

cement:3-coarse sand)finishing with flush pointing in

93 Providing and laying coloured glazed tiles of the size 43.00 Sq. 1417.36

300mm x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm in Mtr.

skirting, risers of steps and dedo on 10 mm. thick cement

piaster 1:3 (1 cement: 3 coarse sand) & jointed with white

94 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. 1.00 No. 958.17

size having weight not less than 35 Kg.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

95 Providing TMT Bar FE 500D reinforcement for R.C.C. 3145.00 Kg. 76.21

work including bending, binding and placing in

position complete upto floor two level.

96 Providing & erecting open well horizontal mono block 1.00 No. 39632.40

jump set with cast iron body, complete for three phase

submersible motor having [H] For 15 H.P.3 phase open

well horizontal mono block pump set suitable for

LPM to 1140 LPM @ 20 to 39 MTR head suitable for

65/80 mm dia delivery pipe.

97 Supplying & erecting approved make 3 phase motor 2.00 Sq. 19695.00

control cubical panel (Star-Delta) made from 16G.CRCA Mtr.

sheet duty painted with epoxy powder painted inside and

outside with hinged doors and locking arrangement,

consisting suitable size of ON-OFF isolator {AC-

3/23duty) main fuses, single phasing preventer cum

water level, Guard{Compe unit). Toggle switch to by pass

Single phase preventercum WLG indicating lamps for R-

Y-B phases, over load reIay. Automatic water level

controller, Ammeter & Voltmeter each with two way

selector switch incoming wires duty socket

Crimped,Panel to be erected on angle iron frame

grouted on wall as overload relay,

thermal/EIectronics star delta cutoff timer,start-stop push

buttons. The isolator overload relay &contractors of L&T

Siemens or Cuttler Hamer make only. Panel to be

erected on angle iron frame ground on wall (e) S/D upto

98 Providing and laying polished Kota stone slab flooring 21.00 Sq. 976.72

over 20mm (Average) thick base of cement mortar 1:6 (1- Mtr.

cement : 6-coarse sand) or L.M. 1.1.5 [1-Lime putty :1.5

coarse sand) laid over and jointed with grey cement slurry

mixed with pigment to match.

99 Providing and laying polished kota stone slab 25mm thick 1.00 Sq. 1121.48

in risers of steps,skirting Dedo and pillars laid on 10mm Mtr.

thick cement mortar 1:3 (1-Cemertt : 3 coarse sand) and

jointed with gray cement slurry mixed with pigment to

match the shade of slab including rubbing and polishing

100 Applying two coats of putty & two coats of primer of 12.00 Sq. 40.59

approved brand and manufacture on new wall surface to Mtr.

give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign

matter and sand papered smooth.

101 Wall painting (two coats) with plastic emulsion paint of 12.00 Sq. 78.90

approved brand and manufacture on undecorated wall Mtr.

surface to give an even shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

102 Distempering (Two coats) with oil bound distemper of 21.00 Sq. 84.16

approved brand and manufacture and of required shade Mtr.

on wall surfaces to give an even shade, over and

including a priming coat with distemper primer of

approved brand and manufacture after thoroughly

brushing the surface free from mortar dropping and other

foreign matter and also including preparing the surface

even and sand papered smooth. Extra over Item

for distempering with oil bound washable distemper on

ceiling and sloping roofs.

103 Wall Painting (Two coats) with weather proof acrylic 58.00 Sq. 114.53

emulsion paint of approved brand and manufacture and Mtr.

of required shade on exterior wall surface to give an even

shade over and including primary coat with Alkaly

resistance primer of approved brand after thoroughly

crushing surface to remove all dust and remains of loose

powdered material etc. copm. for all height.

104 Providing and fixing rolling shutters of approved make 5.00 Sq. 3503.41

made of 80 mm wide M.S laths inter-locked together Mtr.

through heir entire length and jointed together at the ends

by end locks mounted on specially designed pipe shaft

with bracket plates, guide channels and arrangement for

inside and outside locking with push-pull operation

including the cost of hood cover and sprig

etc.complete(A) Shutters having width below 3.5M.

105 Providing and fixing three track Sliding window + fixed 4.00 Sq. 1583.95

glass at top having standard extruded colour anodized Mtr.

aluminum section equivalent to jindal series C (20 mm)

section numbers are : shutter top -20530 , bottom-

shutter inter lock - 20531, shutter side (handle) -

frame-bottom with gutter- 21651, frame top & side -

21650 with 5 mm thick transparent tinted float glass in

shutter as well as fix glass top of window with rubber

gasket, air lock strip and finishing joints with silicon

sealant, with standard extruded colour anodized

aluminum coated fittings as per details etc complete.

106 Providing and laying controlled cement concrete M-200 1.00 Cu. 6107.58

and curing etc. complete including the cost of form work Mtr

and reinforcement for reinforced concrete work in (c)

Chhajja for Ground floor.

107 Providing and laying broken chine mosaic flooring for 25.00 Sq. 747.29

terrace using 12 mm to 20 mm broken pieces of glazed Mtr.

tiles to be laid over cement mortar 1:3 to plain or slope

and to be tempered to bring mortar creme out upto

surface using white cement including rounding off

junctions and extending them upto 15 cm along the wall,

clearing with water and oxalic acid etc. as directed.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

108 Providing and fixing MS. grills of required pattern to 72.00 Kg. 102.62

wooden frames of windows etc. with M.S, flats at required

spacings and frame alround, square or round bars with

round headed bolts and nuts or by screws (A) Plain Grill.

109 Providing and fixing mirror polished 18 mm thick Green 2.00 Sq. 2458.34

Marble stone with full round edge and polished of Mtr.

approved quality in clading on sill and around the doors/

windows/ ventilation with 12 mm thick cement mortar CM

(1:4) and fixing with cement slurry & adhesive including

moulding of exposed edges as directed by engineering in

charge etc, complete.

110 Providing and laying controlled cement concrete M-200 1.00 Cu. 7078.59

and curing etc. complete including the cost of form work Mtr

and reinforcement for reinforced concrete work in (c)

Lintal for Ground floor.

111 Providing and fixing Pre-cast Rubber Dye / steel Dye 88.00 Sq. 685.41

inter locking concrete Block 60mm thick with grade of Mtr.

concrete M-300 pnumatic compressed/vibrated

mechanically and as per approved design confirming to

IS 15658:2006 including 35mm Sand layer for levelling

and filling the joint sand in proper line and level as per

guidlines of IRC:SP 63-2018 etc.Complete.

i.e. Rs. Fifty four lakh forty three thousand forty four and paise thirty nine only.

Deputy ExecutiveSr.

Divisional Accountant Officer

Executive Engineer

I/We am/are willing to carry out the work @ ______________ % above/below percent

(Should be written in figures and words) of the estimated rate mentioned above. Amount of

my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5. 1% testing charges should be paid by the contractor.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by

me and found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

City (R & B) Sub Division Bharuch (R & B) Division Bharuch (R & B) Division,

Bharuch Bharuch Bharuch