Repair and maintenance of LT and HT overhead lines of G.M. (A) office, Residential colony, AKC Hospital, Regional Store etc. as on when required basis for a period of one year under GM Unit, Argada Area.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc as required. Above 10.00 metre and upto 12.00 metre.

Supplying and erection of galvanized stay set for 11 KV over head lines complete with 19/20 mm dia x 1.8 mtr. Long stay rod, anchor plate of size 45 cm x 45cm x 7.5 mm thick, thimble, stay clamps, turn buckle (20 mm x 600 mm) 7/4.0 mm dia G.I stay wire and 11 KV stain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Supply of channel iron 75 mm x 40 mm x 6 mm (7.14 kg per metre) pole top bracket/ cross arm for single 11 KV over head line conductor complete with 50mm x 6 mm that iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc. and painting with primer and finish paints as required.

Supplying channel iron 75 mm x 40mm x 6mm (7.14 kg per metre) cross arm for two 11 KV over head line conductor complete with 50 mm x 50mm x 6mm angle iron bracket welded to the channel iron and complete with 50 mm x 6 mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washer etc. (as per drawing) and painting with primer and finish paints as required.

Erection of pole top/straight two wire/V shape two wire, angle iron/ channel iron, cross arm on steel tubular/rail/PCC pole for 11/22/33 KV as required.

Supplying and erection of 11 KV pin insulator complete with large steel head G.I pin, nuts, washers etc as required.

Supplying and erection of 11 KV disc insulator for 11 KV overhead lines with galvanized insulator fitting ball and socket type and complete with galvanized strain clamps, bolts, nuts, washers etc as required.

Supplying of two lengths of channel iron 75 mm x 40 mm x 6 mm (7.14 kg per metre) double pole cross arm for three wire 11 KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm x 6mm M.S flats welded on one side to the channel iron with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc. (as per drawing) and painting with primer and finish paint as required.

Supplying and erection of a set of cross bracing FRL, same work for 11 KV overhead line double pole structure having four members fabricated out of 50mm x 50mm x 6mm angle iron to form a rectangle of minimum size 1400 mm width x 2500 mm height complete with 50 mm x 6 mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins and nuts etc. (as per drawing) and painting with primer and finish paints as required.

Erection of ACSR conductor 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required.