REPAIRS AND PERIODICAL SERVICES TO BLDG NO 36,35 AND BLDG NO.23 INSIDE FCTORY

Amount

Dismantling single layer Manglore pattern on similar tiles in roofing.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section for unframed work.

Dismantling boarding, any description, fixed in any position, with nails.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

Rough excavation not exceeding 1.5 m deep and getting out in hard dence soil.

Cement concrete 1:4:8 (40 mm graded aggregate in foundations, filling and mass concrete.

Cement concrete type B- 2, 1:4:8 (40mm graded aggregate) 75 mm tk.

Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 70 mm tk.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) (unreinforced) as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil.

Labour only for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken stones or boulders(except material)

M&L for providing Cement concrete type B-1, 1:2:4 (20mm graded aggregate)100 mm thick including finishing cement concrete surface even and smooth using extra cement.

S & L of Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4.

M&L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions and as adirected and as approved.

M&L for Gl frame work for seamless (Size of grid 605 x 605mm ) ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L for 3mm thick wall care putty on internal plastered walls surfaces over one coat primer and two coat of interior type plastic emulsion with preparatory work on as directed .

M & L for Painting on old wooden surfaces of any description, over 10cm width or girth, using synthetic enamel paint two coat including preparatory works as directed and approved by Engineer in Charge. (Make: Asian/ Dulux/ Nerolac as approved by the EIC to be used).

M & L for Painting on old steel surfaces of any description, over 10cm width or girth, using synthetic enamel paint two coat including preparatory works as directed. (Make: Asian/ Dulux/ Nerolac as approved by the EIC to be used).

Material & Labour for applying Two or more coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including preparatory works on old surfaces as directed. [Make: (Asian Apex Ultima)/ (Dulux weathersheild Max)/ (Nerolac Excel Total) as approved by the EIC to be used].

Taking down Chowkhats or frames exc 1.5 sq.m but n exc 4 sq. m each from damaged position (without taking off shutters from the frame) complete as directed.

Dismantling of Asbestos cement (corrugated,semi-corrugated, etc.) sheets in roof coverings

Dismantling timber scantlings 40 sq. cm and over in section, in any position ( unframed)

Excavating in trenches, in hard dence soil n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out

S & F of Fe 410 -W (Gde- E- 250) quality- A- Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates

M & L for Cement concrete 100 mm tk. type D- 2, 1:4:8 (40mm graded aggregate)

M & L for Cement concrete 70 mm tk. type B-1, 1:2:4 (20mm graded aggregate) Finishing cement concrete surface even and smooth with out using extra cement.

M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete, 1:3:6, set in CM 1:4 as directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L Plain, galvanised, mild steel sheeting 0.80 mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

Rendering 12 mm thick on fair faces of brickwork or concrete surfaces in C.M 1:4.

S & F of Plain, solid, straight chowkats and frames, ( 2nd class hard wood) wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

S & F of Plain, framed, panelled shutters (any number of panels), 2nd class hard wood 30 mm tk. with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

S&F Aluminium handles, cast type, 100 mm size anodised complete as directed

S&F Butt hinges, medium weight 100 mm size cold rolled mild steel, and fixed

S&F Mortice lock, Brass 4 levers vertical type, size 100 mm complete as directed.

M & L of Glazed ceramic tiles White tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and screed 10mm thick on fair faces of brick work or concrete surfaces, in CM 1:4

S&F colour Non Skid ceramic tiles 7 to 8mm thick coloured tile (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:4)

S&F of Water closet complete including provision of lime concrete bedding fixed in repairs including materials & labour - Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, white, with integral foot rests.

S & F of Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive offixing supply pipe to flushing cistern, trap and waste pipe)

S&F Bib taps, 15 mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F PVC connections 15mm size with PTMT nuts of length 600 mm

S & F of Unplasticised PVC pipes 20 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe

S & F of PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors bore 75 mm

S & F of PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors bore 110 mm

S & F of PVC (SWR) bends any radius bore 75 mm.

S & F of PVC (SWR) bends any radius bore 110 mm.

S & F of PVC (SWR) junction single, (Single T) equal or unequal bore 75 mm

S & F of PVC (SWR) junction single, (Single T) equal or unequal bore 100 mm

S & F of Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S &F Sheet glass 4.8mm thick , ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane

S & F Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work 18/ 19 mm tk

M & L for Obliterating old writing of any description, n exc 0.1 sq. m, with paint to match existing work as directed.

M&L for Writing letters, using thick enamel paint (Block, Roman, Italic or Indian) 15cm high, as directed.

Removing building materials etc. (other than spoil) to a distance exc 1 km n.exc 5 km the lead included in the rates, including loading, unloading and stacking at the destination

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade With Grey Cement and no pigment

M&L Type B1 1:2:4 20 mm , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M & L for Sand filling under floors or in foundations including watering and consolidation

Taking down carefully by copper / aluminium point wiring, un screwing from boards/outlets boxes,fittings and fixtures such as switches,ceiling roses,sockets,lamp holders, brackets, ceilings fittings and regulators etc, removing materials to store for keeping in safe custody or for taking credit(credit for above items should be made as per conditions separately) and making good with cement plastering, POP/Equivalent material and surfacing with wall putty in distrubed surface of wall, ceiling, floor etc, except existing tube light fittings, calling bell and MCB DB to be measured only when found serviciable in all respects complete for reuse.

S & F of open wiring in PVC heavy duty conduit ISI marked including all accesories with PVC Insulated FRLS copper stranded conductor cables of size 1.5 sqmm 1100 V grade for each One light point or one fan point/bell/exaust etc from main lighting SDB and switchboard should be flush mounted as directed by site incharge Make.Havells/L&T/Finolex/ v-guard/philips

S & F of open wiring in PVC heavy duty conduit ISI marked including all accesories with PVC Insulated FRLS copper stranded conductor cables of size 1.5 sqmm 1100 V grade for each One light point or one fan point / bell / exaust fan etc for additional points and switch board should be fixed flush mounted as directed by site incharge Make.Havells /L&T /Finolex / v-guard / philips

S & F of open wiring One 3 pin socket outlet,16/5 amps ,independent in PVC conduit heavy duty ISI marked including all accesories with PVC Insulated FRLS copper stranded conductor cables of size 2x2.5 sqmm and 1x 1.0sq mm 1100 V grade for each power circuit etc from SDB to individual sockets, switch board to be mounted flush as directed by site incharge. Make.Havells/L&T/Finolex/ v-guard/philips

S&F of of switch flush piano type 6 Amps, single pole, oneway. Make:Leader/Cona/Anchor/Alfa

S&F of switch & Sockets combinations 2 in 1, 3pin 6 Amps (5 holes)Flush type Universal. Make: Leader/Cona/Anchor/Alfa/philips.

S&F of switch & Sockets combinations 2 in 1, 3pin 6/16 Amps Flush type Universal. Make: Leader/Cona/Anchor/Alfa/philips.

S&F of single pole & Neutral 8 way 230 v Double door sheet metal enclousures for DB'S when MCBs to be used. Make:HAVEELS/L&T/SIEMENS

S&F of Double pole,RCBOs 32 Amps 30 mA rated for incomer as directed by site-in-charge. Make: MDS/HAVELLS/INDO-ASIAN.

S&F of Triple pole & Neutral 4 way 415 V Double door sheet metal enclousures for DB'S when MCBs to be used. Make:HAVEELS/L&T/SIEMENS

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB), TPN, 40A/100Amps in the DB complete with connection testing and commissioning as directed by site-in-charge. Make: MDS/HAVELLS/INDO-ASIAN.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB), SPN, 32 Amps in the MCB DB complete with connection testing and commissioning as directed by site-in-charge. Make: MDS/HAVELLS/INDO-ASIAN.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB), SP 6 To 32 Amps, in the MCB DB complete with connection testing and commissioning as directed by site-in-charge. Make: MDS/HAVELLS/INDO-ASIAN.

Supply and laying or fixing or passing through pipe &Trench XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, 4core, cross-sectional area 25 sq. mm Cable laying termination with lugs,nuts and washers and fixing with proper size gland to be done as per IS and as directed by site In charge. Make: Haveels/Polycab/v-guard/polycab

S&F of Ceiling rose, 3 phase/PVC/polycarbonate, isolated body Make:Leader/Cona/ Anchor/Alfa/ philips

S&P fixing of round shape 15 watts 220volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder,LED lamp suitable for roof celing inculating connecting up with three core flexible copper conductor cable of suitable size complete.Make: PHILIPS/HAVELLS/CROMPTON/BAJAJ/LUCKER

S& Fof open wiring cables FRLS in PVC heavy duty ISI marked conduit including all accessories for circuit/submain copper conductor, single core cable in surface/recessed as require wiring alongwith earthwire with the following sizes of 2x6.0 sq. mm + 1x6.0 sq. mm earth wire from Main DB to Sub main DB as directed by the site incharge. Make.Havells/L&T/Finolex/ v-guard/philips

S & L of un-reinforced pre-cast concrete cable cover, Type 2, flate grade M-20, size 300X180X40mm, to be laid as directed by site in-charge.

Excavating in trench not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundation etc, or for shafts, wells, cesspits, manholes, pier holes etc. getting out in Hard/dense soil.

Returning, filling in including spreading, leveling in layers not exceeding 25 cms, Hard/dense soil.

M & L of Sand filling under Trenches.

Supply and providing of Cement concrete in sub floors, sub-bases, floors and pavings, etc, Type B-2, 1:2:4(40mm graded aggregate 100mm thick.

Demolition of cement concrete in ground floor and paving not exceeding 15 cms thick. (below or above ground level).

S & L of steel tube medium grade ISI marked, GI with all fittings laid for cable protection bore of tube 40mm, as directed by site-in-charge.

RAVIKUMAR (BID ID -848185)

ACE PROMOTERS (BID ID -848019)