SPECIAL REPAIRS TO EA-03 OFFICERS DU, ADDN/ALTN AND SPECIAL REPAIRS TO PAVER BLOCK AT APPROACH AREA TOWARDS QUARTERDECK AT SNC(O) MESS AND CERTAIN SANCTIONED WORKS UNDER AGE B/R II OF GE(NW) KOCHI AT NAVAL BASE KOCHI

Amount

Dismantling of single layer mangalore pattern roof tiles including ridges

M&L for mangalore pattern roof tiles, interlocking at sides, joints laid dry complete all as specified

All as per item No.2 above, but except toles. (Serviceable tiles obtained vide item No.1 above shall be reused)

M&L for ridge or hip tiles to suit Mangalore pattern roofing tiles, bedded and jointed in CM 1:6.

Dismantling of battens for tiles, shingles etc, of any size including tilting fillets, spaced exc 15 cm all as specified

S&F second class hard wood, sectional area exc 5 but n exc 15 Sqcm, clean swan battens at 30 cm centres, fixed in roof for fixing mangalore pattern tiles

All as per item No.6 above, but except battens (Serviceable battens obtaine vide item No.5 above shall be reused).

Dismantling timber scantlings 40 sq. cm and over in section, in any position unframed work and all as directed.

Dismantling timber scantlings under 40 sq. cm in section, in fillets, rails, posts, rafters, purlins etc in unframed work and all as directed.

S&F second class hard wood plain fillets, square or rectangular in section, clean sawn, secured with nails, bull nosed, splayed, chamfered or rounded on one edge or face area exc 13 but n exc 25 Sqcm in section

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F mild steel rolled sections (Fe 410-W (Gde-E-250) quality-A) as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, tubular poles, fixed with angle cleats and other connections all as specified and directed.

M&L mild steel screw bolts exc 10cm but not exc 15cm long and dia of neck 11 to 15mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified

M&L second class hard wood scantling, clean sawn, 40 Sqcm and over in section, in unframed work, fixed with nails complete all as specified

Dismantling wooden boaring, any description, fixed in any position with nails, all as specified and directed.

S&F 2nd class hard wood boarding, 20mm thick, planed one side with butt joints as in eve/barge boards, fixed with nails complete all as specified and directed.

M & L preparation of surfaces of wood and wood based materials, new or old of any description and girth not other wise described and treated with one coat of creosote oil all as specified

All as per item No.17 above, but for tile battens

M&L for filletting of sectional area exc 25Sq cm but not exc 50 Sq cm in any position and to any shape in CM 1:3, including all mitres, stops etc complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar roof coverings, all as specified and directed.

S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275. complete all as specified

S&F 0.63mm thick Galvanised, plain mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275. complete all as specified

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water any description, etc.

M&L for rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4, finished even & smooth (without using extra cement.) all as specified and directed .

M&L for rendering 10mm thick on brick work or concrete surfaces in cement mortar 1:6 finished even & smooth (without using extra cement.) all as specified and directed .

M&L for preparing newly plastered external wall surfaces and applying two coats of weather proof paint (Apex Ultima or equivalent) over a coat of white wash all as specified and as directed.

M & L for preparation surfaces of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified

M & L for complete removal of existing treatment on walls and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified

M & L complete removal of existing treatment of external surfaces of walls, soffits of chajjas, cornices etc by washing down and rubbing and applying two coats of weather proof (antifungal) paint over a coat of antifungal primer complete all as specified and directed.

Dismantling of wall or ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc complete all as specified and directed.

M&L for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

S&F Anodised aluminium snap grid frame work for false ceiling, wall panelling etc, size of grid 605 x 605 mm using wall angle 25x25x2mm, main Tee 38x25x1.5mm and cross Tee 25x25x1.4mm complete all as specified and directed

S&F 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework in ceiling as per manufacturer's instruction all as specified

M&L for suspended false ceiling consisting of 12 mm thick gypsum seamless board suspended on GI frame work with staggered joints, GI frame work to consist GI perimeter channel 25mm x 20mm of 22 gauge along perimeter of false ceiling, channel section of 50 x 25mm of 22 gauge at 300mm centre to centre throughout one way fixed with screws/nuts & bolts and other direction 40 x15mm x 22 gauge channel provided for interlocking with GI cleat and expansion fasteners including hangers 6mm dia GI fixed to roof slabs, board are to be joined and finished so as to have a flush look which include finishing the tapered and square edges of the gypsum board with joining compound and paper tape and applying two coats of plastic emulsion paint over a coat of primer and one layer of 3mm thick putty suitable for gypsum board including necessery scaffolding complete all as specified and directed.

M & L for preparation of new ceiling surfaces and applying two coats of oil bound distemper all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) exc 1.50 sq. m but not exc 4 Sqm each all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) n exc 1.50 sq. m each all as specified and directed

Taking down shutters of any description not exc 1 sqm each

Taking down shutters of any description exc 1 sqm and n exc 2Sqm each

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5.0mm plain colour PVC sheet reinforced with mild steel square tube, and fixing in opening as per specifications and drawing, complete all as specified and as directed.

S&F Factory Made Solid Panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of Mild Steel Tubes for Top & Bottom Rails having Mild Steel Frame shall be covered with heat moulded plain colour PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and plain colour PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either side and as gap insert for Top Rail & Bottom Rail; Panelling of plain colour PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable PVC Sheet Beading and joined together with Solvent Cement and fixing in the Frame at Site as per Specifications and Drawing, complete all as specified and as directed.

S & F 2nd class hardwood 35 mm thick glazed skeleton shutters, open rebated and prepared to receive glass, guaze etc, edges of framing plain, chamfered or rounded, divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24(b) complete all as specified

S & F 2nd class hardwood 30 mm thick glazed skeleton shutters, open rebated and prepared to receive glass, guaze etc, edges of framing plain, chamfered or rounded, divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24(b) complete all as specified

M&L for 40 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats all as specified

Hacking out old broken glass (any thickness) from wooden frame fixed with putty or fixed with beads.

M&L for 3 mm thick sheet glass, ordinary quality fixed with oil putty in square exc 0.50 sqm in each pane all as specified

S&F 150mm long extruded aluminium anodised handle, fabricated type, all as specified

S&F 100mm long extruded aluminium anodised handle, fabricated type, all as specified

S & F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified

S&F 100mm mild steel butt hinges, medium weight, cold rold, all as specified

S&F 75mm mild steel butt hinges, medium weight, cold rold, all as specified

M & L applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surface over 10cm width or girth including preparation of surfaces

M&L for 2nd class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified

M & L framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.410-W (Gde-E-250) quality-A complete all as specified

M&L for preparation of new or previously untreated steel surface exceeding 10 cm width or girth and applying two coats of anti corrosive paint over a coat of red oxide zinc chromate primer all as specified and as directed

M&L preparation of old painted wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed .

M&L for applying crack filling sealant over external wall surfaces all as specified and directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes including bolts, if required, hooks (stay) heavy for large gates, hold fasts and similar articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L for preparing surfaces of small articles such as stop, covers, gully gratings, hold fasts, ends of posts, backs of chowkats etc, area n exc 0.1 Sqm each and treated with tar or coal tar black paint all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint all as specified and directed.

M&L for sanding newly tarred or painted surfaces with clean sharp sand all as specified and directed.

M&L for providing PCC 1:3:6, type C1 (using 20 mm graded stone aggregate) as in cills, steps, parapets and railings, copings, bed plates etc including necessary form work complete all as specified

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash hand basin counter and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including CM 1:4, 15mm thick screed and bed concrete with PCC 1:2:4 type B-0, 25mm thick using 12.5mm graded aggegate complete all as specified and directed

Demolition of Stone slabs and tiles of any description or thickness, laid, bedded and pointed in any mortar in floors, aprons etc all as specified and directed.

S&F in repair vitreous china white wash down water closet pan (pedestal pattern) with trap and fixing bolts (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc.including PVC seat cover complete all as specified and as directed.

S&F in repair PVC Low Level Flushing Cistern 10 Litre capacity, White, valveless, symphonic action type, with Inlet, Ball Valve, Float and Handle or two button type, including brackets alongwith flush pipe of polyethylene low or high density or PVC 32mm dia and connections to pipes complete all as specified and as directed.

S&F in repair sinks with draining board made of stainless steel 1mm thick , kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair 'L bow' operated tap, 15mm bore, brass chromium plated complete all as specified and as directed.

S&F in repair white glazed vitreous china WHB flat back size 550x400 mm including CI bracket etc incl waste coupling and PVC waste pipe 40mm bore 90cm long with coupling spring type complete all as specified

S&F in repair brass chromium plated trap P or S pattern, 40mm bore, for wash basins and sinks with inlet and outlet, screwed for pipe or connections and with one cleaning cap complete all as specified

S&F in repair brass chromium plated bottle trap for wash basins with inlet or outlet screwed for pipe for connection including necessary packing, union and cap (32 mm bore) complete all as specified

S& F in repairs pillar tap 15mm bore fancy type, cast copper alloy with capstan heads, chromium plated, screwed down, all as specified and directed.

S& F in repairs hand shower (health faucet) with 8mm dia 1 metre long flexible tube and wall hook complete of make Prayag as per Cat No.BHS 48 & BEA 81, all as specified and directed.

S & F PVC connection 15mm bore 45cm long with brass coupling complete.

S & F in repar vitreous china soap dish, coloured, approximate size 160x160x90mm, recessed type, embedded in the wall all as specified and as directed.

S&F in repair Brass Chromium Plated Tubular Towel Rail, 20mm dia, D type, 60 Cm long between Flanges and fixed, complete all as specified and as directed.

S&F in repairs toilet paper holder, brass chromium plated with rod and fixing to walls with chromium plated brass screws and fixed complete all as specified and as directed.

S&F high density poly-ethylene pipes (HDPE) 40mm dia of pressure rating 6 kgf/cm2 concealed to walls, ceilings or in floors etc complete all as specified and directed.

S&F in repairs CP angle cock screwed down high pressure or butterfly handle, screwed down, screwed for iron pipe of brass ferrule and fixed 15 mm bore

S&F in repair 6mm thick bevelled edge plain looking mirror with SS stud with suitable backing complete all as specified and directed

S&F in repair 18mm thick rubwood as in cupboard shutter, shelves etc, cut to shape and fixed with screws complete all as specified and directed.

S&F in repair 12mm thick rubwood as in cupboard shutter, shelves etc, cut to shape and fixed with screws complete all as specified and directed.

S&F 100mm stainless steel hinges/box hinges for cupboards, fixed with screws complete all as specified and directed.

S&F 100mm stainless steel bow handle for cupboards, fixed with screws complete all as specified and directed.

S&F magnetic latch for cupboard shutter , fixed with screws complete all as specified and directed.

M&L for french polishing to wood or wooden surface over a coat of wood filler including preparation of surface complete all as specified and directed.

S&F powder coated aluminium frame work for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc.complete all as specified (minimum thickness of powder coating 50 micron).

S&F powder coated aluminium window & ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55Kg/RM including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium fitings such as peg stays 150mm long (1No), hinges type B21 100mm long (2Nos), suitable handle (1No) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Screed bed or bedding layer of mortar in CM (1:4), 10 mm thick for laying in floor finishes all as specified and directed .

M&L for rendering 10mm thick on brick work or concrete surfaces in cement mortar 1:3, finished even & smooth (without using extra cement.) all as specified and directed .

M&L for antiskid rectified coloured ceramic tile of size 400x400x8mm thick in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed .

M&L for glazed ceramic coloured tiles 450x 300x 7 mm thick on vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed.

M&L for vitrified ceramic tiles, light shade, ultra charged, 10mm thick (square/rectangular), polished, area of each tile exceeding 0.42 SqM but not exceeding 1.00 SqM, laid in floors etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match with matching border complete all as specified and as directed.

Demolition of brickwork or stone masonry or PCC block masonry built in cement mortar including removal of debris all as specified and directed.

M&L for pre-cast cement concrete block masonry in Type C1, 1:3:6 (20mm graded aggregate) with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L for pre-cast cement concrete block masonry in Type C1, 1:3:6 (20mm graded aggregate) with solid blocks, not exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

S&F 75mm mild steel butt hinges, medium weight, cold rold, all as specified and directed.

S&F 4 mm thick figured glass, pin head type, ordinary quality fixed with aluminium beading, glazing pin etc in square not exc 0.50 sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair 300mm ordinary rat rail rod pattern springs including roller and roller plate complete, all as specified and directed.

M&L for preparation of surface by complete removal of old previously treated steel surfaces of any discription over 10 cm width or girth and applying two coats of anticorrosive paint over a coat of red oxide zinc chromate complete all as specified and as directed

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for all as specified and directed.

M&L for plain cement concrete type B1, 1:2:4 (using 20 mm graded aggregate), 25mm thick as in floors, finished even and fair complete all as specified and as directed

S&F high density polyethylene pipes (HDPE) 32mm dia of pressure rating 6 kgf/cm2 fixed to walls, ceilings or in floors etc complete all as specified and directed.

S&F in repairs vitreous china wash down water closet squatting pan, Orissa pattern, white colour of size 580x440mm with integral foot rests (excluding flushing cistern and flush pipe) all as specified and directed.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repairs glass shelf assembly all as specified and directed.

S&F in repairs 25mm dia powder coated decorative curtain rod, all as specified and directed.

S&F in repairs decorative brackets for curtain rod, all as specified and directed.

S&F in repairs bath room cabinet mirror-Truph 35x12x44cm, all as specified and directed.

Supply only waste coupling of PTMT with discharge pipe of 32mm bore (half or full threaded), minimum weight 45g, all as specified and directed. (Fixing inluded in WHB).

S&F in repairs PVC (SWR) Nahani trap/floor trap, 75mm , plain with grating including jointng with solvent cement complete, all as specified and directed.

S&F in repairs PVC (SWR) pipes, 110mm dia, single socketed in any length with rubber ring joints complete, all as specified and directed.

S&F PVC (SWR) bends, 110mm dia complete, all as specified and directed.

M&L for 75 mm thick plain cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in sub base of floor all as specified and directed .

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil all as specified and directed.

Removing excavated soil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers not exc 15cm thick, spread, levelled and rammed including watering as required all as specified and directed.

M & L for hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

M&L for 75 mm thick plain cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base of floor all as specified and directed .

M&L for coarse aggregate for granolithic floors, graded from 12.5mm to 4.75mm under floors or in foundations, spreading, levelling and well ramming in layers not exc 25cm thick, including watering as required complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block, any shape and size conforming to IS 15658-2006 of 80mm thickness M-40 grade using grey cement and pigments all as specified and directed.

M&L for PCC (1:2:4) type B0 using 12.5 mm graded stone aggregate as in kerb stones or lintels upto 1.5m clear span, cills, steps, seismic or other similar bands, plinth courses, parapats and railings upto 60cm height, copings etc including weathering, slightly rounded or chamfered angles and throating complete including necessary form work all as specified and directed.

Dismantling of old unserviceable paver block of any thickness and any shape complete all as specified and directed.

Excavating in post holes (or similar holes), each not exc 0.50CuM, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm, watering and removing surplus soil to a distance not exc 50M and making good the surface complete all as specified and directed.

M&L for 100 mm thick plain cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base all as specified and directed .

M&L for 50 mm thick plain cement concrete type B0, 1:2:4 (12.5mm graded aggregate) laid in bays using 3x35mm size glass strip complete all as specified and directed .

M&L for plain cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in foundations, filling and mass concrete all as specified and directed .

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified abd directed.

S&F half PVC square eaves gutter of size 150mm with union, sockets and intermediate joints, end drop, PVC reducer, PVC end cap and PVC band, set in approved jointing compound including clamp for PVC eves gutter brackets completem all as specified and directed.

S&F PVC (SWR) pipes, 150mm dia, single socketed in any length with rubber ring joints, fixed to wall/pole including clamp for PVC brackets complete, all as specified and directed.

S&F in repairs PVC rain water pipes, 110mm dia, including bend, elbow, iron brackets for fixing etc complete, all as specified and directed.

S&F welded steel wire fabric mesh of weight not exe 4kg per SqM fixed to wood or steel members complete all as specified and directed.

M&L for preparation of new or previously untreated steel surface exceeding 10 cm width or girth and applying two coats of anti corrosive epoxy paint over a coat of epoxy primer over a coat of red oxide zinc chromate primer all as specified and as directed

M&L for PCC (1:2:4) type B1 using 20 mm graded stone aggregate for edge concreting or mud stops, rounded or chamfered edges including necessary form work all as specified and directed.

M&L for preparation of new or previously untreated surfaces of brick, stone, concrete, AC sheet, plaster etc and and applying two coats of synthetic enamel paint over a coat of priming coat all as specified and as directed

M&L for rendering 10mm thick on brick work or concrete surfaces in cement mortar 1:4, finished even & smooth (without using extra cement.) all as specified and directed .

M&L for 100 mm thick plain cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in sub base all as specified and directed .

M&L for preparing newly plastered wall surfaces and applying two coats of white wash all as specified and as directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to wall/timber frame work as in pelmet boxes/cupboard and similar work including 6mm thick teak wood lipping on exposed edges complete all as specified and directed.

S&F 150mm long Aluminium anodised handle, cast type all as specified and directed.

S&F 50mm butt hinges, cast brass with mild steel hinge pin, bright polished, type B-12, all as specified and directed.

S & F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified

S&F 150mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and directed.

Dismantling structural steel work including doors, gates but excluding frames truss all as specified and directed.

Demolition of reinforced cement concrete for roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work including removal of demolished material from site complete all as specified and directed.

M&L for preparing newly plastered wall surfaces and applying three coats of white wash all as specified and as directed.

M & L for preparation of newly plastered external surfaces of walls and applying two coats of weather proof (antifungal) paint over a coat of antifungal primer over 3mm thick wall care putty of three layer complete all as specified and directed.

M&L for preparing old plastered wall surfaces and applying two coats of white wash all as specified and as directed.

S&F 4 mm thick sheet glass, ordinary quality fixed with aluminium beading, glazing pin etc in square not exc 0.50 sqm in each pane complete all as specified and directed.

S&F powder coated (thickness of powder coating not less than 50 micron) aluminium 5mm dia hexagonal channel for grill fixed to aluminium frame with aluminium beading complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc.not exc 10 sq m on plan and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified

M&L for formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation, pile caps and plinth beams; and similar work; vertical or to batter for rough finished flat all as specified and directed.

M&L for RCC (1:2:4) type B1 using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete all as specified and directed. (Reinforcement will be measured and paid separately).

M&L for formwork to flat sides of pillars, posts, struts, piers, columns and sanchions for rough finished surfaces of concrete all as specified and directed.

M&L for RCC (1:2:4) type B1 using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed. (Reinforcement will be measured and paid separately).

S&F steel rolling shutters of lath thickness 1.25mm, with out ball bearing but gear operated type with bevel gear box and crank handle, including top cover, anchoring rod, hasp and staple and and one shop coat of primer, erected in position as indicated complete all as specified and directed.

SUKU CONSTRUCTIONS

MS BUILDERS

M.J.JOY AND COMPANY