Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹79,712Accepted-AOC | ₹79,712 | L1 | Accepted-AOC ACCEPTED |
Tender Value
₹81,630
EMD Value
₹2,041
Closing Date
16 May 2026, 3:00 pmClosed
Assistant Executive Engineer
Office of Assistant Executive Engineer PWD ELECTRICAL SUB DIVISION KOLLAM
GENERAL Collector Bungalow Kollam Replacement of faulty Yard lights fixtures General Electrical Work
2026_PWD_826060_4
PWD/BLDG/TR/23203/2025_6_1_1/1
Open Tender
Electrical Works
60 days
Kollam
Please refer tender document
9 documents required · 9 mandatory
₹555
₹2,041
16 Jun 2026
8 May 2026
18 May 2026
8 May 2026
16 May 2026
8 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Electrical maintenance works | |||||
| 1.001 | 1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required. | - | each | 126.42 | - |
| 1.002 | 90.3.19.3:Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories and lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required1200 mm 1X20W LED Lamp with box type fixture | - | each | 1,245.56 | - |
| 1.003 | OD252127/2025-2026:Supply and providing 20W, 1200mm LED Tube in the existing box type fittings after providing necessary alterations in the wiring of the fittings and make it good working conditions. | - | each | 482.66 | - |
| 1.004 | OD265322/2025-2026:Supply and providing the following types and power rated lamps in the existing fittings as required 9W LED bulb - | - | each | 115.1 | - |
| 1.005 | 90.15.4.1:Supply Conveyance, installation, testing and commissioning of 20W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) | - | each | 2,422.85 | - |
| 1.006 | 90.15.4.2:Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) | - | each | 4,665.37 | - |
| 1.007 | 90.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply | - | each | 2,244.96 | - |
| 1.008 | OD252148/2025-2026:Supply and fixing 2.5 mfd Capacitor | - | no | 75.87 | - |
| 1.009 | OD265333/2025-2026:Supply, conveyance, installation, testing and commissioning of the following sizes of exhaust fans in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS. 300/305 mm sweep Light Duty Exhaust fan in metal frame working on 230 V A/C- | - | each | 2,156.04 | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1435878.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.08 MB
AFFIDAVIT.pdf
Tender Documents • 0.03 MB
PRILIMI.pdf
Tender Documents • 0.64 MB
E.pdf
Tender Documents • 0.01 MB
IP.pdf
Tender Documents • 0.02 MB
SP.pdf
Tender Documents • 0.36 MB
L.pdf
Tender Documents • 0.11 MB
T.pdf
Tender Documents • 0.10 MB
SBD.pdf
Tender Documents • 1.63 MB
BOQ_1435878.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid