Construction of Municipal Council Office Building at Bundi

Amount

P&L C.N.S. Material including excavation at source of supply carriage loading, unloading filling in trenches/ under floor in layers not exceeding 15cms leveling watering and compacting (Laid & Compated material to be measured).

Providing and fixing 22 oz. loop pile carpet(Capital,Unitex or eq.) with precision tufted loop piles and underlay of 6mm thick PU foam fixed to existing levelled floor with synthetic adhesives as approved by the manufacturer

Providing and fixing of cut pile polyester carpet for auditorium flooring with 6mm pile height, pile weight of 1100gsm, to be pasted over levelled suface with synthetic rubber adhesive.

Providing & fixing "ornamental stone cladding" of approved sand stone with dressing complete as per existing design/pattern/approved design,fixing with 30mm thickgrinded cement mortar 1:2 & pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge. 30 mm thick cladding

Providing and fixing fine dressed sand stone "Dasa/coping" 50 mm thick as per existing matching , fixing in grinded lime surkhi mortar 1:2 including pointing in cream and stone powder 1:1 with an admixture of pigment to match the shade of stone complete in all respect.

Providing and fixing fine dressed sand stone "Dasa/coping" 30 mm thick as per existing matching , fixing in grinded lime surkhi mortar 1:2 including pointing in cream and stone powder 1:1 with an admixture of pigment to match the shade of stone complete in all respect.

Supplying and fixing ashlar solid block pillars fully fine (3 lines) dressed.

Supplying and fixing ashlar stone arches fully fine 30 mm thick dressed for 1.5 to 5 m. span (Net content payable).

Supplying and fixing ashlar todies for chajjas and shelves fine (3 lines) dressed 30 x 30 x 10 cm.

Providing and fixing "Stone Kalasha" as per existing matching on doms od chattries/jharokhas as per existing design & dimensions as per traditional practices, fixing of kalash carefully without damaging the doms complete in all respect. Sand stone/approved stone Kalasha height.(exposed part) 45cm. to 60cm.

Supply Installation, testing & commissioning of Electric Motor Driven teracc pump horizontal split casing centrifugal fire duty operation pump, ( with mechanical seal, bronze impeller & carbon steel EN-8 shaft) capable for a DISCHARGE OF 450 L.P.M. at a HEAD of 15 mtrs. coupled through flexible coupling (i/c coupling guard ) with totally enclosed, fan cooled squirrel cage 4 pole induction motor suitable for operation on three phase AC supply of 415 ± 10% Volts 50 Hz fixing the coupied pump & motor on a common structural base frame , making a suitable cement concrete foundation and mounting the complete pump-motor set on the foundation using suitable numbers of anti-vibration mountings as per the design/recommendations of the manufacturer and as per the detailed specifications.

Providing & fixing C.I. `Y' Strainer (screwed/ flanged) with stainless steel fine wire mesh perforated sheet basket with necessary flange/ unions nuts, bolts and washers complete as required (on pump suction), with a working pressure not less than 16 Kg/Sq.cm

150 mm dia