DOOR TO DOOR MAINTENANCE OF CERTAIN FURNITURE ARTICLES UNDER AGE(I) LANSDOWNE.

1.0 ALMIRAH LARGE WOODEN, with Shelves , 1/2 h and 1/2 Sh FD-214 (a) Removing unserviceable tops from the Almirah large wooden and supply and fixing new almirah tops made planks Ist class hardwood teak of size 42"x18"x25mm and duly polished, complete all as specified and directed.

(b) All as per ALMIRAH LARGE WOODEN, with Shelves , 1/2 h and 1/2 Sh FD-214 before but replacement teak of wood planks shelf for almirah of size 40” x 16” x 25mm complete all as specified and directed.

(c) All as perALMIRAH LARGE WOODEN, with Shelves , 1/2 h and 1/2 Sh FD-214 before but replacement of teak wood planks bottom for almirah of size 42” x 18” x 25mm complete all as specified and directed.

(d) All as per ALMIRAH LARGE WOODEN, with Shelves , 1/2 h and 1/2 Sh FD-214 before but in replacement of teak wood planks side shutter for almirah of size 60” x 18” x 25mm complete all as specified and directed.

(e) All as per ALMIRAH LARGE WOODEN, FD-214before but supply and fixing in replacement of teak wood planks back side for almirah of size 72” x 42” x 25mm complete all as specified and directed.

2.0 ALMIRAH MEDIUM WOODEN, with Shelves , 1/2 H and 1/2 sh FD-68 (a)Removing unserviceable tops from the Almirah medium wooden tops made of hard teak wood planks Ist class of size 36"x18"x25mm and duly polished, Complete all as specified and directed.

(b) All as per ALMIRAH MEDIUM WOODEN, with Shelves , 1/2 H and 1/2 sh FD-68 before but replacement of teak wood planks shelf for almirah of size 34” x 16” x 25mm complete all as specified and directed.

(c ) All as per ALMIRAH MEDIUM WOODEN,with Shelves , 1/2 H and 1/2 sh FD-68 before but replacement of teak wood planks bottom for almirah of size 36” x 18” x 25mm complete all as specified and directed.

(d) All as perALMIRAH MEDIUM WOODEN,with Shelves , 1/2 H and 1/2 sh FD-68 before but replacement of teak wood planks side shutter for almirah of size 60” x 18” x 25mm complete all as specified and directed.

(e) All as per ALMIRAH MEDIUM WOODEN, with Shelves , 1/2 H and 1/2 sh FD-68 before but in replacement of teak wood planks back side for almirah of size 60” x 36” x 25mm complete all as specified and directed.

3.0 Bed Hard Plywood Top FD-246: (a) Taking out old unservicable long rails of bed ply wood to and Provision of new long rails of seasoned teak wood of same shape and size duly french polished, all as spefied and shown on drawing complete all as specified and directed.

(b) Taking out old unservicable short rails of bed ply wood to and Provision of new long rails of seasoned teak wood of same shape and size duly french polished, all as spefied and shown on drawing complete all as specified and directed.

(c) Replacement of unserviceable ply wood teak face and providing 4mm thick ply wood ISI Marked BWR teak face on one side and other commercial of size 780 x 340 mm on both side of head board duly french polished complete all as specified and directed.

(d) All as Bed hard ply top but size 780 x 180 mm for foot boards complete all as specified and directed.

(e) Dismantling of unserviceable plywood top with new plywood 12 mm commercial BWR confirming to IS 303 as shown on drg. FD-246 /Similar Pattern complete all as specified and directed.

(f) Taking out old unserviceable bottom rails of bed ply wood top and Provision of new bottom rails of seasoned teak wood of required shape and size duly french polished, all as specified and shown on drawing complete all as specified and directed.

(g) S&F 4 Nos wooden corner cleat to strengthen long rails and legs made of new seasoned teak wood of required shape and size duly french polished, all as specified and directed complete all as specified and directed.

(h) Taking out unserviceable head board including legs of Bed plywood top and S&F new head board including legs made out of kiln (plant) seasoned Ist class hard wood (Teak wood) free from all defect and knots and plywood one side teak faced 3.5mm thick on the frame complete duly French Polished complete all as specified and directed.

(j) Taking out unserviceable foot board including legs of Bed plywood top and S&F new foot board including legs made out of kiln (plant) seasoned Ist class hard wood (Teak wood) free from all defect and knots and plywood one side teak faced 3.5mm thick on the frame complete duly french polished complete all as specified and directed.

(j) Taking out unserviceable stiffener of Bed plywood top and S&F new stiffener made out of kiln (plant) seasoned Ist class hard wood (Teak wood) free from all defect and knots complete all as specified and directed.

4.0 Book case steel FD-1028/90 (a) Taking out old unserviceable handle and supply and fixing new SS handle 100mm long (as per Sample) complete all as specified and directed.

(b) Taking out old unserviceable lock and supply and fixing new MS body & six lever lock four in one with duplicate key and key plate of approved best quality complete all as specified and directed.

(c ) Taking out old unserviceable/ broken glass and supply and fixing new 4mm thick galss for door shutter complete all as specified and directed.

(d) Taking out unserviceable door shutter and supply and fixing new door shutter made of 1mm thick PBI Sheet with and including gas welding as per shape and size as shown on drg including a coats of spray painting with synthetic enamel paint of approved shade over one coat of red oxide primer including preparation of new steel surface complete all as specified and directed.

5.0 CHAIR CB STEEL WITH/ WITHOUT ARMS (DRG NO FD-75(M) (a) Removing the following broken/ damaged parts from chair tubular steel with/ without arms and replacing the same with new one complete all as specified and directed.

(b) New Seat frame of chair CB steel with arms made of well seasoned 1st class hardwood duly caning with half round PVC cane 2mm wide 0.4mm thick, border with 3mm wide 0.5mm thick in Godrej pattern duly painted with two coats of black synthetic enamel paint in glossy finish over a coat of pink primer and fixed to frame with 04 Nos machine nuts and bolts of appropriate size with washer complete all as specified and directed.

(c ) All as per SCHAIR CB STEEL WITH/ WITHOUT ARMS (DRG NO FD-75(M) here-in-before but back of Chair CB Steel with arms complete all as specified and directed.

(d)All as per CHAIR CB STEEL WITH/ WITHOUT ARMS (DRG NO FD-75(M ) here-in-before but seat of Chair CB Steel without arms complete all as specified and directed.

(e) All as per CHAIR CB STEEL WITH/ WITHOUT ARMS (DRG NO FD-75(M) here-in-before but back of Chair CB Steel without arms complete all as specified and directed.

(f) New Arms of chair CB steel with arms made of well seasoned 1st class hard wood and duly painted with two coats of black /OG synthetic enamel paint in glossy finish over a coat of pink primer and fixed to frame with wood screw of appropriate size complete all as specified and directed.

(g) PVC toes to chair CB steel with/ without arms of standard approved quality complete all as specified and directed.

(h) PVC plug to the top of chairs CB steel with /without arms of standard approved quality complete all as specified and directed.

6.0 Chair School with Hand Board Map (Drg No. FD/E6/MAP/05) (a) Removing unserviceable seat and back from school chair and S&F PVC 4mm thick in single piece seat and back weight not less than 1.2 kgs each with adequate nos of steel screw, complete all as specified and directed and shown on drawing.

(b) Removing unserviceable hand board from chair school and S&F pre-laminated particle board of exterior grade of approved shade with standard size of PVC edging all around of minimum thickness 1.6mm thick fixed with hot glue complete all as specified and and directed and shown on drawing.

(c ) Supply and fixing in replacement shoe of school chiar with hard board new hard rubber/PVC shoe superior quality, complete all as specified, shown on drawing and directed.

(d ) M & L for painting to frame of chair school with hardboard synthetic enamel paint including preparation of surface, complete all as specified and directed.

7.0 SCHOOL DESK TYPE-II & III (a) Removing of old unserviceable seat of desk type -III and supply and fixing of new one made out of pre-laminated particles board commercial 18mm thick of size 1020 x 250 mm covered with 4mm thick Shisham wood beading fixed with 38 x 8 mm steel screw, all around complete all as specified and directed.

(b) Removing of old unserviceable back rest of desk type -III and supply and fixing of new one made out of pre-laminated particles board commercial 18mm thick of size 1020 x 200 mm covered with 4mm thick Shisham wood beading fixed with 38 x 8 mm steel screw, all around complete all as specified and directed.

(c) Removing of old unserviceable slope top of desk type -III and supply and fixing of new one made out of pre-laminated particles board commercial 18mm thick of size 1020 x 310 mm covered with 4mm thick Shisham wood beading fixed with 38 x 8 mm steel screw, all around complete all as specified and directed.

(d) Removing of old unserviceable horizantal bottom long rails seat and desk of desk type -III any description and supply and fixing of new 25 mm dia MS square tube 18 gauge 800mm long all as shown in drawing and as directed by Eingineer-in-Charge.

(e) Removing of old unserviceable bottom long rails seat and desk of desk type -III any description and supply and fixing of new 25 mm dia MS square tube 18 gauge 900mm long all as shown in drawing and as directed by Eingineer-in-Charge.

(f) Removing of old unserviceable stiffner in table of desk type -III any description and supply and fixing of new 25 mm dia MS square tube 18 gauge 380mm long all as shown in drawing and as directed by Eingineer-in-Charge.

(g) Removing of old unserviceable legs in bench of desk type -III any description and supply and fixing of new 25 mm dia MS square tube 18 gauge 730mm long all as shown in drawing and as directed by Eingineer-in-Charge.

(h) Removing of old unserviceable legs seat of desk type -III any description and supply and fixing of new 25 mm dia MS square tube 18 gauge 150mm long all as shown in drawing and as directed by Eingineer-in-Charge.

(i) Removing of old unserviceable legs seat of desk type -II any description and supply and fixing of new 25 mm dia MS square tube 18 gauge 195mm long all as shown in drawing and as directed by Eingineer-in-Charge.

8.0 LOCKER bed side WOODENf FD-54/DB-4076 (a) Removing of unserviceavle TOP as required of locker bed side wooden and S&F new top made of 760mm x 600mm 1st Class seasoned teak wood top all as specified and shown on Drg. FD-54/DB-4076.

(b) Removing of unserviceavle bottom as required of locker bed side wooden and S&F new bottom made of 760mm x 600mm 1st Class seasoned teak wood top all as specified and shown on Drg. FD-54/DB-4076.

(c ) Removing of unserviceavle sides as required of locker bed side wooden and S&F new bottom made of 1st Class seasoned teak wood top all as specified and shown on Drg. FD-54/DB-4076.

(d ) Removing of unserviceavle sleves as required of locker bed side wooden and S&F new slves made of 1st Class seasoned teak wood top all as specified and shown on Drg. FD-54/DB-4076.

(e) Removing of unserviceavle Shutters as required of locker bed side wooden ,and S&Fof New shatters made of 12 mm thick veeneered decorative plywood, (with BWR resin), decorative veneers (teak veneer finish) on one face only fixed with and including two mild steel medium grade ISI marked 50 mm size hinges and 19 mm long mild steel wood screws and two coat french poliesh duly complete all as specified and shown on drg. FD-54/DB-4076

(f) Providing hasp and staple mild steel 50 mm size 1.6 mm thick, stove enamelled black and fixed with and including screws complete all as specified and shown on drg. FD-54/DB-4076

(g) Providing MS CP 19 mm dia conduit pipe with socket as shown in drg. FD-54/DB-4076

(h) Providing aluminium handles cast type, anodised of 100 mm size complete all as specified and shown on drg. FD-54/DB-4076

9.0 Chair Revolving/Chair Visitors/Chair Executive/ Chair computer (a) Taking out unserviceable seat of chair of any size any description (chair revolving/chair visitors/chair executive/chair computer /chair cushioned steel with arm/without arm off sizes) up holstering the same with foam seat 50mm thick 32 density on 6 mm thick plywood commercial duly covered with tapestry cloth/rexine and labour for repair complete all as specified and directed.

(b) (chair revolving/chair visitors/chair executive/ chair computer/chair cushioned steelTaking out unserviceable back of chair of chair of any size any description (chair revolving/chair visitors/chair executive/ chair computer/chair cushioned steel with arm/without arm off sizes) up holstering the same with foam seat 50mm thick 32 density on 6 mm thick plywood commercial duly covered with tapestry cloth/rexine and labour for repair complete all as specified and directed.

(c ) Taking out unserviceable foam cushion from arms of seat and S&F new foam cushion 25mm thick 32 density covered with tapestry cloth/ rexine of chair revolving (chair visitors/chair executive/chair computer/ chair cushioned steel off sizes) and labour for repair of revolving chair complete all as specified and directed

(d) Replacement of unserviceable hydraulic system of chair of any description and pattern (computer chair/revolving chair) complete all as specified and directed .

(e) Replacement of unserviceable wheel of chair of any description and pattern (computer chair/revolving chair) complete all as specified and directed .

(f ) Replacement of unserviceable base of chair of any description and pattern (computer chair/revolving chair) complete all as specified and directed .

(g) Replacement of unserviceable push back system of chair of any description and pattern (computer chair/revolving chair) complete all as specified and directed .

(h) Replacement of old/unserviceable handle of chairs of any pattern and description (chair revolving/chair visitors/chair executive/chair cushioned off sizes) with soft handle of approved quality complete all as specified and directed.

10. Shoe Rack Steel (FD/E6/MAP/02(R) ) (a) M & L for Gas welding to frame of shoe rack including preparation of surface and removing the unwanted welding spot, complete all as specified and directed.

(b) M & L for painting to frame of shoe rack with black synthetic enamel paint including preparation of surface, complete all as specified and directed.

(c) Supply and fix in replacement of unserviceable portions of frame of shoe rack with 35mm conduit pipe of thickneee 1.6mm duly gas welding, complete all as specified and directed.

(d) Supply and fix PVC rubber shoes as pee existing size suitable for shoes rack as directed by Eng-in charge

11.0 Repairs to Computer table FD/E6/MAP/03 (a) Removing of u/s top and S&F new top of prelaminated MDF board exterior grade 18mm thick Grade-I, Type-II exterior grade of appproved make (Covered with 4mm thick teek wood/PVC beading duly polished) of existing shape & size complete to match the original as shown on drg as directed

(b) Removing of u/s side and S & F new side of prelaminated MDF board exterior grade 18 mm thick grade-I, type-II, exterior grade of approved make of existing shape & size complete to match the original as shown on drg as directed

(c ) Removing of Broken/u/s keyboard and S&F new keyboard of prelaminated MDF board exterior grade with sliding arrangement /telescopic rails both sides of key board of existing shape & size complete to match the original as shown on drg as directed

(d) Removing of u/s drawer & S&F new drawer with sliding arrangement/ telescopic rails both sides of drawer including of 4 leaver lock as per Godrej pattern of existing shape & size complete to match the original as shown on drg as directed

(e) Removing of u/s base/bottom cabinet and S&F of new bottom cabinet of 18mm thick pre- laminated MDF board exterior grad 18mm thick grade-I, type-I of existing shape & size complete to match the original as shown on drg as directed

12.0 M&L for Repairing and two coat mallamine polishing with spray machine after removing of existing polish and smothening of surface wherever required or as directed by AGE (I) Lansdowne to the following furniture articles all are of MES pattern viz FD/DB/FD/MAP series or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and shown on drgs and as directed by Engineer-in-Charge. Note : Work will be executed at Milatary Station Lansdowne where the furniture exist in different User Units at OTM/Md Accn under the jurisdiction of AGE(I) Lansdowne. including BSO's Furniture Yard as directed by Engineer-in-Charge.

(a) ALMIRAH LARGE WOODEN, FD-214

(b) ALMIRAH MEDIUM WOODEN, FD-68

(c ) Bed Hard Plywood Top:

(d) SCHOOL DESK TYPE-II & III

(e) LOCKER bed side WOODENf FD-54/DB-4076

(f) Table Dining 8/6 Pers

(g) Chair Writing

(h) Chair Dining

(j) Chair Dining Map Offrs

(k) Sofa set 5 seater

(l) SOFA SET 4 SEATER (1+1+1+1) ( FD-281):

13.0 Preparation of all exposed surface of following items (in side & outside) including carrying out repairs such as necessary denting wherever required and applying one or more coat of synthetic enamel paint (hemotone / Sliver grey in front side and light / TA grey inside as approved) with Spray painting over a coat of red oxide primer and filler (putty) wherever required, complete all as specified , directed and shown on drawing.

(a) Book case steel FD-1028/90

(b) Almirah Medium/Small Steel with Shelves and 1/2h 1/2Sh

(c) Almirah Large Steel with Shelves 1/2 H , 1/2 Sh

(d) CHAIR CB STEEL WITH/ WITHOUT ARMS (DRG NO FD-75(M)

Please Enable Macros to View BoQ information