SR to ESI H Mulamkunnathkavu Thrissur Raising of front yard and laying of CC Paver blocks construction of CC drains with RCC cover slabs MS grills in front of the Casualty Dialysis Unit and Ayurveda Wards

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in charge,All kinds of soil.

Clearing the grass and wild vegetation by using bush cutting machine (Four stroke) and removing the debris outside the periphery of the area cleared by engaging skilled operator with machine and miscellaneous fittings such as rope cutter, triangular blade, circular blade, fuel, Oil etc as required including transportation from one dispensary to another dispensary on complaint need basis and as directed by engineer-in- charge etc-complete in the following dispensary premises under Thrissur district.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement – All work upto plinth level : 1:1.5:3 (1 cement : 1.5 Course sand (Zone III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers

Under 20 cm wide

Steel reinforcement for RCC works ready to use “cut and bend” rebars of approved make from factory/workshop to construction site including placing in positio and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade of Fe-500D or more

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with Diesel Road roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge, For rising the yard

Steel work in built up tubular (round, square or rectangular hollow tubes etc. ) trusses etc. including cutting hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. ,Hot finished welded type tubes -40 x 20 x 2.9 mm (RHS) Rectangular Steel Hollow Section (2.50 Kg/m)