Construction Of Suspension Bridge Near Old Munnar Town In Munnar Grama Panchayath, Idukki District

Construction of suspension bridge (45m)

2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil

2.26.1 Extra for every additional lift 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil

60.7.1 DRY RUBBLE MASONRY – Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete

7.1.1 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 up to plinth level with cement mortar 1:6

5.3 Reinforced cement concrete work in beams, suspended floors, roofs, landings, balconies, chajjas, lintels etc. with 1:1.5:3

4.1.8 Providing and laying cement concrete 1:4:8 excluding centering and shuttering – all work up to plinth level

5.1.2 Providing and laying RCC 1:1.5:3 excluding centering, shuttering, finishing and reinforcement – all work up to plinth level

20.1.3 Providing, driving and installing driven cast-in-situ RCC piles of grade M-25, 500 mm dia

20.6.1.2 Vertical load testing of piles as per IS 2911 (Part IV), routine test

15.3 Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars

5.2.2 Reinforced cement concrete work in walls, columns, piers, abutments etc. up to floor five level with 1:1.5:3

5.9.1 Centering and shuttering for foundations, footings, bases of columns etc.

5.9.6 Centering and shuttering for columns, piers, abutments, posts and struts

5.9.5 Centering and shuttering for lintels, beams, plinth beams, girders and cantilevers

5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.23 Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 ( cement : 3 fine sand).

16.70.1 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I. wire of dia 4 mm

10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

OD95007/2025-2026 Fabrication supply and fixing rope pulley 250mm dia with 20mm thick with base plates 44 mm dia axel provided gun metal bushing and necessary nut and bolts completed assembled set

OD95147/2025-2026 Fabrication and assembly supply of tie rode treading 16 mm outer dia including all labour and conveyance charges etc complete as per standard specification

10.26.3 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.G.I. pipes

13.60.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD95148/2025-2026 Painting with Cadmium compound for protection of 44mm dia., 6x44steel core galvanized wire rope of suspension bridge two coats including cost of materials, labour charges and conveyance etc complete.

13.52.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

OD95149/2025-2026 Supply and providing 44 mm dia. 6x44 steel core galvanised wire rope with necessary D shackle 4 nos and 4 nos thimbles for sufficient no rope clamps for tightening the wire rope in position. Rate inclusive of all materials, erection charges, conveyance etc complete, Excluding cost of anchoring)

24.2 Providing and fixing double scaffolding system (Cup lock type ) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and / or pointing and / or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-Charge. Note: ( 1) The evaluational area of the scaffolding shall be measured for payment purpose, (2) The payment will be made once only for execution of all items of such works.

OD95187/2025-2026 Anchoring the wire rope suspension bridge to the anchor block including labour ,hire charges of tools and plant

16.60.1 Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminimum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - lll of ASTM-D-4956-01 as approved by Engineer-in-Charge, letters, borders etc. as per IRC: 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class ll of ASTM -D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminimum alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminimum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the Engineer-in-Charges. (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment ).Overhead informatory road signage

50.2.26.1 Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in charge.

8.2.2.1 Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shadeArea of slab upto 0.50 sqm

16.21 Engraving letters in hard stone

10.20 Providing and fixing bolts including nuts and washers complete.