Construction of Admin Block (G+2), Library and Hospital (G+1), Kitchen, Hardcore Cell, Passing room, Waiting area at Navsari District Jail, Dist. Navsari. (Incl. Elect. and Fire fighting system) (Jail NRB Priority - 2025-26) (First Attempt)

No. In Figure In Words

1 Demolition including stacking of serviceable materilas and 1600.00 Cum. 1073.56 Rupees One Thousand Seventy

disposal of unserviceable materials with all lead and lift. (i) Three And Paise Fifty Six Only

R.C.C. work

2 Demolition of Brick work and stone masonry including 450.00 Cum. 558.57 Rupees Five Hundred Fifty Eight And

stacking of serviceable materilas and disposal of Paise Fifty Seven Only

unserviceable materials with all lead and lift.(ii) In Cement

3 Dismentaling Steel work including distempering & Stacking 1300.00 KG 3.72 Rupees Three And Paise Seventy

the material with all lead & Lift. Two Only

4 Credit Value of M.S.Flat, Angle & grill. (All dismantled 1300.00 KG -25.00 Rupees Only -32500.00

materials in as is where its condition weather serviceable or

unserviceable shall be considered for credit and also taken

away by the agency from the site of work.)

5 Cleaning of manhole/Chamber including of rubbish, ash, 30.00 Nos 250.00 Rupees Two Hundred Fifty Only

loose soil, stone pieces, removing sludge silt with the help of

rod and other mechanical equipment etc. complete for any

depth of Man hole / I.C. Chamber and as directed by Engineer

in charge.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

6 Cleaning gully trap including of rubbish, ash, loose soil, stone 30.00 Nos 120.00 Rupees One Hundred Twenty Only

pieces, removing sludge silt with the help of rod and other

mechanical equipment etc. and as directed by Engineer in

7 Cleaning of Pipe line of any diameter upto 150mm including 100.00 Rmt 100.00 Rupees One Hundred Only

all labor, required tools, tackles and disposing of all debris as

directed by Engineer in charge

8 Excavation for foundation upto 1.5 Mt. depth incluing sorting 2042.00 Cum. 151.81 Rupees One Hundred Fifty One And

out and stacking of useful materials and disposing of the Paise Eighty One Only

excavated stuff for all lead and lift. (B) Dense or Hard soil

9 Excavation for foundation from 1.5 Mt. to 3.0 Mt depth 367.00 Cum. 164.70 Rupees One Hundred Sixty Four And

incluing sorting out and stacking of useful materials and Paise Seventy Only

disposing of the excavated stuff for all lead and lift. (B) Dense

or Hard soil

10 Providing and laying cement concrete 1:3:6 (1-Cement : 3- 71.00 Cum. 3050.40 Rupees Three Thousand Fifty And

coarse sand : 6- graded stone aggregates 40 mmnominal Paise Forty Only

size) and curing complete including cost of formwork in (A)

Foundation and Plinth

11 Proveding and laying ordinary cement concrete 1:4:8 (1 613.00 Cum. 2720.01 Rupees Two Thousand Seven

cement : 4 coarse sand : 8 graded machine broken stone Hundred Twenty And Paise One Only

aggregate 40mm nominal size ) and curing complete

including cost of from work in FOUNDATION AND PLINTH.

12 Providing and laying cement concrete 1:5:10 ( 1 cement ; 5 590.00 Cum. 2554.82 Rupees Two Thousand Five Hundred

coarse sand; 10 graded stone aggregates 40mm nominal Fifty Four And Paise Eighty Two Only

size) and curing complete including cost of form work in

foundation and plinth.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

13 Providing and laying controlled cement concrete M - 250 and 124.00 Cum. 4627.56 Rupees Four Thousand Six Hundred

finishing smooth with curing etc complete including cost of Twenty Seven And Paise Fifty Six

form work of Plywood only with fair finish & Proping must be Only

of steel only so as to give a fair finish but excluding cost of

reinforcement for any Floor for R.C.C. work in COLUMN

FOOTING. Rate are inclusive of Providing and mixing

Plasticizer of approved make in propertion as per mix Design.

14 Providing and laying controlled cement concrete M -250 61.00 Cum. 8791.84 Rupees Eight Thousand Seven

including finishing smooth with curing complete including the Hundred Ninety One And Paise Eighty

cost of form work of Plywood only with fair finish & Proping Four Only

must be of steel only so as to give a fair finish but excluding

cost of reinforcement for R.C.C. WORK IN COLUMN for any

cross sectional area of column upto plinth. Rate are inclusive

of Providing and mixing Plasticizer of approved make in

propertion as per mix Design.

15 Providing and laying controlled cement concrete M - 250 and 109.00 Cum. 7172.07 Rupees Seven Thousand One

finishing smooth with curing etc complete including cost of Hundred Seventy Two And Paise

form work of Plywood only with fair finish & Proping must be Seven Only

of steel only so as to give a fair finish but excluding cost of

reinforcement for any Floor for R.C.C. work in Plinth Beams.

Rate are inclusive of Providing and mixing Plasticizer of

approved make in propertion as per mix Design.

16 Filling avaliable excavated earth ( excluding rock) in trenches, 2409.00 Cum. 132.33 Rupees One Hundred Thirty Two And

plinth sides of foundations etc. in layers not exceeding 20cms. Paise Thirty Three Only

in depth consolidating each deposited layer by ramming and

layers of 20 cm. Thickness including watering, ramming and And Paise Thirty Six Only

consolidating etc. complete

18 FILLING in plinth with SAND under floors including watering, 127.00 Cum. 467.02 Rupees Four Hundred Sixty Seven

raming consolidating and dressing etc. complete. And Paise Two Only

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

19 Applying general insecticide pest control treatment to floors, 747.00 Sqm. 51.01 Rupees Fifty One And Paise One

cupboard etc. including labour, material etc. complete.Using Only

heptacloride 20 EC as per 6313_pests concentration weight

0.50% is recommended 1 liter chemical emulsion dilluted with

39 litre of water will give. Total diluted concentration will be

ltr inclusive of 1 liter chemical emulsion application 0.5 liter

chemical/sqm of surface is recommended as per I.S.

20 Providing and laying controlled cement concrete M -200 and 153.00 Cum. 4050.97 Rupees Four Thousand Fifty And

finishing smooth with curing etc complete including cost of Paise Ninety Seven Only

form work of Plywood only with fair finish & Proping must be

of steel only so as to give a fair finish but excluding cost of

reinforcement.for R.C.C. work in Grade Slab. Providing and

mixing Plasticizer in Cement Concrete as per mix Design

including rate of labour material etc. as per direction of

Engineer in Charge.

21 Providing and laying controlled cement concrete M-250 and 70.00 Cum. 10593.50 Rupees Ten Thousand Five Hundred

finishing smooth with curing etc. complete including cost of Ninety Three And Paise Fifty Only

form work of Plywood only with fair finish & Proping must be

of steel only so as to give a fair finish but excluding cost of

reinforcement Rate are inclusive of providing and mixing

plastisizer of approved make in proportion as per mix Design.

for R.C.C. work in COLUMNS for any cross sectional area at

GROUND FLOOR.

22 Providing and laying controlled cement concrete M-250 and 18.00 Cum. 10633.63 Rupees Ten Thousand Six Hundred

finishing smooth with curing etc. complete including cost of Thirty Three And Paise Sixty Three

form work of Plywood only with fair finish & Proping must be Only

of steel only so as to give a fair finish but excluding cost of

reinforcement.Rate are inclusive of providing and mixing

plastisizer of approved make in proportion as per mix Design.

for R.C.C. work in COLUMNS for any cross sectional area at

FIRST FLOOR.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

23 Providing and laying controlled cement concrete M -250 16.00 Cum. 10673.76 Rupees Ten Thousand Six Hundred

including finishing smooth with curing complete including the Seventy Three And Paise Seventy Six

cost of form work of Plywood only with fair finish & Proping Only

must be of steel only so as to give a fair finish but excluding

cost of reinforcement for R.C.C. WORK IN COLUMN for any

cross sectional area at SECOND FLOOR. Rate are inclusive

of Providing and mixing Plasticizer of approved make in

propertion as per mix Design.

24 Providing and laying controlled cement concrete M -250 1.00 Cum. 10713.89 Rupees Ten Thousand Seven

including finishing smooth with curing complete including the Hundred Thirteen And Paise Eighty

cost of form work of Plywood only with fair finish & Proping Nine Only

must be of steel only so as to give a fair finish but excluding

cost of reinforcement for R.C.C. WORK IN COLUMN for any

cross sectional area at THIRD FLOOR. Rate are inclusive of

Providing and mixing Plasticizer of approved make in

propertion as per mix Design.

25 Providing and laying Controlled cement concrete M-250 and 90.00 Cum. 8931.19 Rupees Eight Thousand Nine

finishing smooth with curing etc.. complete including cost of Hundred Thirty One And Paise

from work of Plywood only with fair finish & Proping must be Nineteen Only

of steel only so as to give a fair finish but excluding cost of

reinforcement. Rate are inclusive of providing and mixing

plastisizer of approved make in proportion as per mix Design.

for BEAMS having any cross sectional area for GROUND

26 Providing and laying Controlled cement concrete M-250 and 27.00 Cum. 8971.32 Rupees Eight Thousand Nine

finishing smooth with curing etc.. complete including cost of Hundred Seventy One And Paise

from work of Plywood only with fair finish & Proping must be Thirty Two Only

of steel only so as to give a fair finish but excluding cost of

reinforcement.Rate are inclusive of providing and mixing

plastisizer of approved make in proportion as per mix Design.

for BEAMS having any cross sectional area for FIRST

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

27 Providing and laying controlled cement concrete M -250 18.00 Cum. 9011.45 Rupees Nine Thousand Eleven And

including finishing smooth with curing complete including the Paise Forty Five Only

cost of form work of Plywood only with fair finish & Proping

must be of steel only so as to give a fair finish but excluding

cost of reinforcement for R.C.C. WORK IN BEAMS for any

cross sectional area at SECOND FLOOR. Rate are inclusive

of Providing and mixing Plasticizer of approved make in

propertion as per mix Design.

28 Providing and laying controlled cement concrete M -250 2.00 Cum. 9051.58 Rupees Nine Thousand Fifty One And

including finishing smooth with curing complete including the Paise Fifty Eight Only

cost of form work of Plywood only with fair finish & Proping

must be of steel only so as to give a fair finish but excluding

cost of reinforcement for R.C.C. WORK IN BEAMS for any

cross sectional area at THIRD FLOOR. Rate are inclusive of

Providing and mixing Plasticizer of approved make in

propertion as per mix Design.

29 Providing and laying controlled cement concrete M -250 15.00 Cum. 8148.57 Rupees Eight Thousand One

including finishing smooth with curing complete including the Hundred Forty Eight And Paise Fifty

cost of form work of Plywood only with fair finish & Proping Seven Only

must be of steel only so as to give a fair finish but excluding

cost of reinforcement for R.C.C. WORK IN SLAB having

thickness of 10cm and upto 13cm for GROUND FLOOR.

Rate are inclusive of Providing and mixing Plasticizer of

approved make in propertion as per mix Design.

30 Providing and laying controlled cement concrete M -250 4.00 Cum. 8188.70 Rupees Eight Thousand One

including finishing smooth with curing complete including the Hundred Eighty Eight And Paise

cost of form work of Plywood only with fair finish & Proping Seventy Only

must be of steel only so as to give a fair finish but excluding

cost of reinforcement for R.C.C. WORK IN SLAB having

thickness of 10cm and upto 13cm for FIRST FLOOR. Rate

are inclusive of Providing and mixing Plasticizer of approved

make in propertion as per mix Design.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

31 Providing and laying controlled cement concrete M -250 3.00 Cum. 8228.83 Rupees Eight Thousand Two

including finishing smooth with curing complete including the Hundred Twenty Eight And Paise

cost of form work of Plywood only with fair finish & Proping Eighty Three Only

must be of steel only so as to give a fair finish but excluding

cost of reinforcement for R.C.C. WORK IN SLAB having

thickness of 10cm and upto 13cm for SECOND FLOOR. Rate

are inclusive of Providing and mixing Plasticizer of approved

make in propertion as per mix Design.

32 Providing and laying controlled cement concrete M -250 133.00 Cum. 7722.96 Rupees Seven Thousand Seven

including finishing smooth with curing complete including the Hundred Twenty Two And Paise

cost of form work of Plywood only with fair finish & Proping Ninety Six Only

must be of steel only so as to give a fair finish but excluding

cost of reinforcement for R.C.C. WORK IN SLAB having

thickness of 13cm and upto 15cm for GROUND FLOOR.

Rate are inclusive of Providing and mixing Plasticizer of

approved make in propertion as per mix Design.

33 Providing and laying controlled cement concrete M -250 48.00 Cum. 7763.09 Rupees Seven Thousand Seven

including finishing smooth with curing complete including the Hundred Sixty Three And Paise Nine

cost of form work of Plywood only with fair finish & Proping Only

must be of steel only so as to give a fair finish but excluding

cost of reinforcement for R.C.C. WORK IN SLAB having

thickness of 13cm and upto 15cm for FIRST FLOOR. Rate

are inclusive of Providing and mixing Plasticizer of approved

make in propertion as per mix Design.

34 Providing and laying controlled cement concrete M -250 34.00 Cum. 7803.22 Rupees Seven Thousand Eight

including finishing smooth with curing complete including the Hundred Three And Paise Twenty

cost of form work of Plywood only with fair finish & Proping Two Only

must be of steel only so as to give a fair finish but excluding

cost of reinforcement for R.C.C. WORK IN SLAB having

thickness of 13cm and upto 15cm for SECOND FLOOR. Rate

are inclusive of Providing and mixing Plasticizer of approved

make in propertion as per mix Design.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

35 Providing and laying controlled cement concrete M -250 4.00 Cum. 7843.35 Rupees Seven Thousand Eight

including finishing smooth with curing complete including the Hundred Forty Three And Paise Thirty

cost of form work of Plywood only with fair finish & Proping Five Only

must be of steel only so as to give a fair finish but excluding

cost of reinforcement for R.C.C. WORK IN SLAB having

thickness of 13cm and upto 15cm for THIRD FLOOR. Rate

are inclusive of Providing and mixing Plasticizer of approved

make in propertion as per mix Design.

36 Extra for additional height of propping and centering where 59.00 Sqmt 587.63 Rupees Five Hundred Eighty Seven

the height of propping and centering exceeds 4.0 m between And Paise Sixty Three Only

supporting floor to ceiling floor to ceiling including supporting

as required (iii) Height more than 4.0 mt and upto 7.5 mt

37 Providing and laying controlled cement concrete M -250 23.00 Cum. 8648.05 Rupees Eight Thousand Six Hundred

including finishing smooth with curing complete including the Forty Eight And Paise Five Only

cost of form work of Plywood only with fair finish & Proping

must be of steel only so as to give a fair finish but excluding

cost of reinforcement for R.C.C. WORK IN Lintel for Ground

Floor.Rate are inclusive of Providing and mixing Plasticizer of

approved make in propertion as per mix Design.

38 Providing and laying controlled cement concrete M -250 4.00 Cum. 8688.18 Rupees Eight Thousand Six Hundred

including finishing smooth with curing complete including the Eighty Eight And Paise Eighteen Only

cost of form work of Plywood only with fair finish & Proping

must be of steel only so as to give a fair finish but excluding

cost of reinforcement for R.C.C. WORK IN Lintel for FIRST

Floor.Rate are inclusive of Providing and mixing Plasticizer of

approved make in propertion as per mix Design.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

39 Providing and laying controlled cement concrete M -250 5.00 Cum. 8728.31 Rupees Eight Thousand Seven

including finishing smooth with curing complete including the Hundred Twenty Eight And Paise

cost of form work of Plywood only with fair finish & Proping Thirty One Only

must be of steel only so as to give a fair finish but excluding

cost of reinforcement for R.C.C. WORK IN Lintel for

SECOND Floor.Rate are inclusive of Providing and mixing

Plasticizer of approved make in propertion as per mix Design.

40 Providing and laying controlled cement concrete M -250 1.00 Cum. 8768.44 Rupees Eight Thousand Seven

including finishing smooth with curing complete including the Hundred Sixty Eight And Paise Forty

cost of form work of Plywood only with fair finish & Proping Four Only

must be of steel only so as to give a fair finish but excluding

cost of reinforcement for R.C.C. WORK IN Lintel for THIRD

Floor.Rate are inclusive of Providing and mixing Plasticizer of

approved make in propertion as per mix Design.

41 Providing and laying Controlled cement concrete M-250 for 46.00 Cum. 6028.43 Rupees Six Thousand Twenty Eight

R.C.C. COPING/LINTEL BEND including the cost of form And Paise Forty Three Only

work of Plywood only with fair finish & Proping must be of

steel only so as to give a fair finish but excluding cost of

reinforcement for Ground FLOOR. Rate are inclusive of

Providing and mixing Plasticizer of approved make in

propertion as per mix Design.

42 Providing and laying Controlled cement concrete M-250 for 15.00 Cum. 6068.56 Rupees Six Thousand Sixty Eight And

R.C.C. COPING/LINTEL BEND including the cost of form Paise Fifty Six Only

work of Plywood only with fair finish & Proping must be of

steel only so as to give a fair finish but excluding cost of

reinforcement for FIRST FLOOR. Rate are inclusive of

Providing and mixing Plasticizer of approved make in

propertion as per mix Design.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

43 Providing and laying Controlled cement concrete M-250 for 17.00 Cum. 6108.69 Rupees Six Thousand One Hundred

R.C.C. COPING/LINTEL BEND including the cost of form Eight And Paise Sixty Nine Only

work of Plywood only with fair finish & Proping must be of

steel only so as to give a fair finish but excluding cost of

reinforcement for SECOND FLOOR. Rate are inclusive of

Providing and mixing Plasticizer of approved make in

propertion as per mix Design.

44 Providing and laying Controlled cement concrete M-250 for 1.00 Cum. 6148.82 Rupees Six Thousand One Hundred

R.C.C. COPING/LINTEL BEND including the cost of form Forty Eight And Paise Eighty Two

work of Plywood only with fair finish & Proping must be of Only

steel only so as to give a fair finish but excluding cost of

reinforcement for THIRD FLOOR. Rate are inclusive of

Providing and mixing Plasticizer of approved make in

propertion as per mix Design.

45 Provinding and Laying controlled cement concrete M-250 for 27.00 Cum. 9608.20 Rupees Nine Thousand Six Hundred

reinforced conerete Chhajja having any thickness up to any Eight And Paise Twenty Only

Hight two level including finishing the exposed surface with

cement mortar 1:3 ( 1 cement : 3 fine sand) to give a smooth

surface including the cost of form work of Plywood only with

fair finish & Proping must be of steel only so as to give a fair

finish but excluding cost of reinforcement for ALL FLOOR.

Rate are inclusive of Providing and mixing Plasticizer of

approved make in propertion as per mix Design.

46 Providing and laying Controlled cement concrete M-250 12.00 Cum. 8310.25 Rupees Eight Thousand Three

including finishing smooth for R.C.C. STAIR CASE including Hundred Ten And Paise Twenty Five

the cost of form work of Plywood only with fair finish & Only

Proping must be of steel only so as to give a fair finish but

excluding cost of reinforcement for ALL FLOORS. Rate are

inclusive of Providing and mixing Plasticizer of approved

make in propertion as per mix Design.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

47 Providing and laying TMT Steel reinforcement (Grade Fe- 112600.00 Kg 77.41 Rupees Seventy Seven And Paise

500/500D) for RCC work including cutting,bending,binding Forty One Only

and placing in position etc.comp for all floor.(Reinforcement at

Shall be As per GSPHCL Approve Make List.

48 BRICK WORK using common burnt clay building bricks 27.00 Cum. 4359.80 Rupees Four Thousand Three

having crushing strength not less than 35 Kg./Sq. cm. In Hundred Fifty Nine And Paise Eighty

Foundation & Plinth in cement mortar 1 : 6 ( 1 cement : 6 Only

coarse sand ( Conventional Bricks) for GROUND FLOOR.

49 BRICK WORK using common burnt clay building bricks 272.00 Cum. 4080.74 Rupees Four Thousand Eighty And

having crushing strength not less than 35 Kg./Sq. cm. In Paise Seventy Four Only

Foundation & Plinth in cement mortar 1 : 6 ( 1 cement :

coarse sand ( Conventional Bricks) for Foundation & Plinth.

Brick Shall be Decide By Engineer in charge.

50 Providing and Laying Autoclaved Aerated Sand based cement 594.00 Cum. 5990.42 Rupees Five Thousand Nine Hundred

concrete (AAC) masonry blocks confirming to IS 2185 (Part 3) Ninety And Paise Forty Two Only

having compressive strength not less than 4.0 N/mm2 (heavy

strength) and jointed with block jointing Adhesive mortar

having tensile strength of not less than 0.8 N/mm2 and

ensuring long lasting thermal insulation according to

European norms(EN13501-2) suitable for high performance

of external & internal concrete masonry walls, joint having

thickness in thin layer of 3 mm to 4 mm between masonry

units. Masonry blocks need not to pre-wet the blocks or post

cure the wall with water. For Ground Floor AAC Block Shall

be GSPHCL Approved Brand Only.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

51 Providing and Laying Autoclaved Aerated Sand based cement 138.00 Cum. 6030.21 Rupees Six Thousand Thirty And

concrete (AAC) masonry blocks confirming to IS 2185 (Part 3) Paise Twenty One Only

having compressive strength not less than 4.0 N/mm2 (heavy

strength) and jointed with block jointing Adhesive mortar

having tensile strength of not less than 0.8 N/mm2 and

ensuring long lasting thermal insulation according to

European norms(EN13501-2) suitable for high performance

of external & internal concrete masonry walls, joint having

thickness in thin layer of 3 mm to 4 mm between masonry

units. Masonry blocks need not to pre-wet the blocks or post

cure the wall with water. For First Floor AAC Block Shall be

GSPHCL Approved Brand Only.

52 Providing and Laying Autoclaved Aerated Sand based cement 126.00 Cum. 6070.00 Rupees Six Thousand Seventy Only

concrete (AAC) masonry blocks confirming to IS 2185 (Part 3)

having compressive strength not less than 4.0 N/mm2 (heavy

strength) and jointed with block jointing Adhesive mortar

having tensile strength of not less than 0.8 N/mm2 and

ensuring long lasting thermal insulation according to

European norms(EN13501-2) suitable for high performance

of external & internal concrete masonry walls, joint having

thickness in thin layer of 3 mm to 4 mm between masonry

units. Masonry blocks need not to pre-wet the blocks or post

cure the wall with water. For Second Floor AAC Block Shall

be GSPHCL Approved Brand Only.

53 Providing and Laying Autoclaved Aerated Sand based cement 35.00 Cum. 6109.79 Rupees Six Thousand One Hundred

concrete (AAC) masonry blocks confirming to IS 2185 (Part 3) Nine And Paise Seventy Nine Only

having compressive strength not less than 4.0 N/mm2 (heavy

strength) and jointed with block jointing Adhesive mortar

having tensile strength of not less than 0.8 N/mm2 and

ensuring long lasting thermal insulation according to

European norms(EN13501-2) suitable for high performance

of external & internal concrete masonry walls, joint having

thickness in thin layer of 3 mm to 4 mm between masonry

units. Masonry blocks need not to pre-wet the blocks or post

cure the wall with water. For Third Floor AAC Block Shall be

GSPHCL Approved Brand Only.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

54 Provinding and fixing chicken wire mesh Jali/plastic wire 0.18 522.00 Sqm. 64.06 Rupees Sixty Four And Paise Six

mm and 0.3m wide with necessary screws and nails to joint Only

between R.C.C. and Masonary work etc. complete as per

Engineer-in-charge.

55 Providing 10 mm thick cement PLASTER in single coat on 929.00 Sqm. 217.78 Rupees Two Hundred Seventeen And

ceilings for interior plastering and finished even & smooth in Paise Seventy Eight Only

C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a

floating coat of neat cement slurry at GROUND FLOOR.

56 Providing 10 mm thick cement PLASTER in single coat on 270.00 Sqm. 244.24 Rupees Two Hundred Forty Four And

ceilings for interior plastering and finished even & smooth in Paise Twenty Four Only

C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a

floating coat of neat cement slurry at FIRST FLOOR.

57 Providing 10 mm thick cement PLASTER in single coat on 155.00 Sqm. 270.70 Rupees Two Hundred Seventy And

ceilings for interior plastering and finished even & smooth in Paise Seventy Only

C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a

floating coat of neat cement slurry at SECOND FLOOR.

58 Providing 10 mm thick cement PLASTER in single coat on 25.00 Sqm. 297.16 Rupees Two Hundred Ninety Seven

ceilings for interior plastering and finished even & smooth in And Paise Sixteen Only

C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a

floating coat of neat cement slurry at THIRD FLOOR.

59 Provinding 15 mm thick cement PLASTER in single coat on 3104.00 Sqm. 223.27 Rupees Two Hundred Twenty Three

brick or concrete wall for interior plastering and finished even And Paise Twenty Seven Only

and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including

finishing with floating coat of neat cement slurry at GROUND

60 Provinding 15 mm thick cement PLASTER in single coat on 715.00 Sqm. 251.83 Rupees Two Hundred Fifty One And

brick or concrete wall for interior plastering and finished even Paise Eighty Three Only

and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including

finishing with floating coat of neat cement slurry at FIRST

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

61 Provinding 15 mm thick cement PLASTER in single coat on 515.00 Sqm. 280.39 Rupees Two Hundred Eighty And

brick or concrete wall for interior plastering and finished even Paise Thirty Nine Only

and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including

finishing with floating coat of neat cement slurry at SECOND

62 Provinding 15 mm thick cement PLASTER in single coat on 135.00 Sqm. 308.95 Rupees Three Hundred Eight And

brick or concrete wall for interior plastering and finished even Paise Ninety Five Only

and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including

finishing with floating coat of neat cement slurry at THIRD

63 Synthetic Texture Plaster with Double Coat Smooth plaster : 2469.00 Sqm. 518.22 Rupees Five Hundred Eighteen And

Providing 20mm thick cement plaster in single coat plastering Paise Twenty Two Only

Outside and finished even and smooth in (i) Cement mortar

1:3 (1-cement : 3-sand) as Base Coat and providing 2-3 mm

thick synthetic texture plaster of approved texture (Material

Shall be Used as Approved By GSPHCL Only ) including cost

of all materials, labour, conveyance, loading and unloading,

taxes, royalties, scaffolding, watering etc.complete for any

Height as per Drawing and instructions of Engineer -in -

64 Provinding 10 mm thick cement PLASTER in single coat of 31.00 Sqm. 228.98 Rupees Two Hundred Twenty Eight

interior plastering and finished even and smooth in cement And Paise Ninety Eight Only

mortar 1:3 ( 1 cement : 3 sand ) and finishing with floating

coat of neat cement slurry including providing and mixing

WATER PROOFING material in C.M. in proportion

recommended by the manufactures for all floors.Including

finishing with a floating coat of neat cement slurry. For ALL

65 Provinding CEMENT VATA ( 10cm x 10cm )size quarter 227.00 Rmt 24.04 Rupees Twenty Four And Paise Four

round in cement mortar 1 : 1 including neat cement finishing, Only

watering etc. Complete.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

66 Providing & laying acrylic base ( zycosil or equivalent ) Water 28.00 Sqm. 110.70 Rupees One Hundred Ten And Paise

proofing paint treatment in two coats to vertical and horizontal Seventy Only

surface of depressed prortion of Bath / WC as directed by

Engineer in charge.This treatment shall be carried out over

and above water proofing cement plaster.

67 Provinding and filling CINDER including watering, 6.00 Cum. 791.68 Rupees Seven Hundred Ninety One

consolidation etc.. Complete. And Paise Sixty Eight Only

68 Providing & Fixing ordinary CEMENT CONCRETE 1:2:4 ( 1 17.00 Sqm. 366.47 Rupees Three Hundred Sixty Six And

cement : 2 coarse sand : 4 graded machine broken stone Paise Forty Seven Only

aggregate 20 mm nominal size ) for flooring Laid in one layer

finished with floating coat of neat cement (A)

69 Providing & Laying Telephonic black Granite stone slab 207.00 Sqm. 2428.00 Rupees Two Thousand Four Hundred

15mm to 18mm thick in dado and jambs laid on 10 mm thick Twenty Eight Only

cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with

high polymer modified quick set adhesive (water based)

including rubbing and polishing etc. complete For All Floor.

Telephonic black granite or as specified in tender item.

70 Providing & Laying P & L 24" x 24" Double Charge vitrified 8 831.00 Sqm. 1304.90 Rupees One Thousand Three

to 10 mm thick tile flooring over 20 mm (average) base of Hundred Four And Paise Ninety Only

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface

orfixing on existing flooring by adhesive including

dismentaling of existing flooring and material jointed with color

cement slurry including finised with flush pointing & cleaning

the surface etc For All Floor.Completed Brand of the tiles

shall be as per approved make list of GSPHCL. Shade & Size

of tiles shall be as specified in tender item.As per Approved

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

71 Providing & Laying 24" x 24" in Skirting riser of steps and 75.00 Sqm. 1420.50 Rupees One Thousand Four Hundred

dado Double Charge vitrified 8 to 10 mm thick tile over 10 Twenty And Paise Fifty Only

mm thick Cement plaster of cement mortar 1:3 (1 cement:

coarse sand) jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc for All floor.

complete Brand of the tiles shall be as per approved make list

of GSPHCL. Shade & Size of tiles shall be as specified in

tender item.As per Approved Design.

72 Providing and Laying 25mm thick Mirror Polished (Dimond 429.00 Sqm. 1100.00 Rupees One Thousand One Hundred

Cut) Kota Stone Flooring over 20mm thick base of cement Only

mortar 1 : 6 (1-Cement : 6-Coarse Sand) laid over and jointed

with grey cement slurry including Rubbing and Polishing etc.

Complete as Directed By Engineer In Charge for all Floors.

73 Providing and Laying 25mm thick Mirror Polished (Dimond 50.00 Sqm. 1177.40 Rupees One Thousand One Hundred

Cut) Kota Stone in risers of steps,skirting Dedo and pillars laid Seventy Seven And Paise Forty Only

on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse

sand) and jointed with gray cement slury mixed with pigment

to match the shade of slab including rubbing and polishing

etc. complete as Directed By Engineer In Charge for all

74 Providing and fixing both side prepolished single piece 278.00 Sqm. 793.90 Rupees Seven Hundred Ninety Three

machine cut 25mm thick KOTA STONE shelves/ partition, And Paise Ninety Only

20mm to 25mm embedded in to wall at support including

racking and finishing smooth the surface including cutting the

stone as and where required etc. complete including moulding

of exposed edges etc. complete for all floors

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

75 Providing & Laying 24" x 24" vitrified 8mm Thick tile flooring 94.00 Sqm. 1418.59 Rupees One Thousand Four Hundred

over 20 mm (average) base of cement mortar 1:6 ( 1 cement: Eighteen And Paise Fifty Nine Only

6 coarse sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring

and material jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc.Completed FOR

ANTISKID Brand of the tiles shall be as per approved make

list of GSPHCL. Shade & Size of tiles shall be as specified in

tender item.As per Approved Design.

76 Provinding & laying Printed / Coloured GLAZED TILES 6 mm 483.00 Sqm. 1426.65 Rupees One Thousand Four Hundred

thick in skirting, risers of steps and DADO on 10mm thick Twenty Six And Paise Sixty Five Only

cement plaster 1: 3 ( 1 cement : 3 coarse sand ) & jointed

with white cement slurry.Size ot tiles shall be 600mm

x300mm. size and shade of tiles shall be as per approved

architecture drawing and as per direction of engineer-in-

charge for all floors .

77 Providing and laying Granite Slab (15-18 mm thick) of 82.00 Sqm. 2150.06 Rupees Two Thousand One Hundred

approved colour & quality & brand, one side polished flooring Fifty And Paise Six Only

over 20 mm (average) base of cement mortar 1:6 (1 cement :

6 coarse sand) laid and jointed with grey cement slurry

including rubbing, curing including grooving, moulding, nosing

of corners and mirror polishing complete.For flooring of steps,

stairs with treads & risers etc.

78 Providing and laying Granite Slab (15-18 mm thick) of 46.00 Sqm. 2227.55 Rupees Two Thousand Two Hundred

approved colour & quality & brand, one side polished flooring Twenty Seven And Paise Fifty Five

over 20 mm (average) base of cement mortar 1:6 (1 cement : Only

6 coarse sand) laid and jointed with grey cement slurry

including rubbing, curing including nosing of corners and

mirror polishing complete.For Skirting.

79 Moulding of Kota stone / Granite Stair Tread complete as 244.00 Rmt 129.95 Rupees One Hundred Twenty Nine

per direction of Engineer In Charge. And Paise Ninety Five Only

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

80 Pro and Making 3 nos of groove total length of stair case 243.00 Rmt 82.80 Rupees Eighty Two And Paise Eighty

trade of size 10mm x 10mm finishind smooth in parralel Only

line.equality spaced as per direction of engineerr in charge in

all type of flooring etc complete.

81 Providing and fixing standared extruded of Alluminium section 29.00 Sqm. 1163.92 Rupees One Thousand One Hundred

of size 63mm x 38.10mm x 1.2mm (of Jindal Section : 2434, Sixty Three And Paise Ninety Two

@ Wt 0.643 Kg / mt) with colour anodized alluminium frame Only

for ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

82 Providing and fixing Alluminium section window having 114.00 Sqm. 1568.27 Rupees One Thousand Five Hundred

extruded Aluminum Colour anodized section frame main Sixty Eight And Paise Twenty Seven

outer size 95mm x 24mm x 1.17mm (of Jindal Section Only

no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track

member size 92mm x 31.75mm x 1.30mm (of Jindal Section

no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x

31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt.

Kg/mt) with sliding shutters of horizontal member size

mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of

Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of

Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick

transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

83 Providing and fixing extruted Alluminium section window 18.00 Sqm. 2119.14 Rupees Two Thousand One Hundred

having extruded Aluminum Colour anodized section frame Nineteen And Paise Fourteen Only

main outer size 127mm x 38.10mm x 1.35mm (of Jindal

Section no:2443, @ wt.of 1.384 Kg/mt), horizontal Four track

member size 122.20mm x 31.75mm x 1.10mm (of Jindal

Section no:8787,@ Wt.1.205 Kg/mt), vertical member of size

122.20mm x 31.75mm x 1.50mm (of Jindal Section

no:8935,@ Wt. 1.398 Kg/mt) with sliding shutters of horizontal

member size 40 mmx18mm x1.29mm (of Jindal Section

no:8949@ wt.of 0.456 Kg/mt), vertical member of size 40mm

x 18mm x 1.29 mm (of Jindal Section no:8947 @ wt.of

0.456Kg/mt/section 8948,@Wt. 457 kg/mt) with 5 mm thick

transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc. complete for

84 Providing and Fixing Extruded Alluminium Section 15 Microns 79.00 Sqm. 4160.35 Rupees Four Thousand One Hundred

Regular Anodized (coating with matt finished and excellent Sixty And Paise Thirty Five Only

outdoor durability) Door with partly glazed of 5mm clear float

glass & partly both sides pre laminated partly board of 12mm

thick as per detailed drawing and specification gaskets of

EPDM quality shall be provided for weather tightening along

with silicon sealent of dow corning/G.E. silicon/wacker

germany of equivalent complete including required fixtures

and fittings etc. as approved by architect complete as per the

following sections of Jindal make or equivalent.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

85 Providing, Supplying and Fixing of 32mm (Total) Thick Double 22.00 Sqm 11082.31 Rupees Eleven Thousand Eighty Two

Flush Door Shutter with 1mm Thick Laminates on Both Side And Paise Thirty One Only

of Shutter. Making / Construction of Flush Door is with Pine or

southern Yellow Pine Filler and 2.5mm core veneer Both Side

and 0.4mm Face Veneer on Both Side with Lock rail on

Center. Flush Door Provide with Teak wood beading patti

(32mm X 12mm) on Peripheries of Flush Door with Door

Frame of Non Teak Solid Wood of size 150mm x 70mm with

Chemically Treated and Seasoned Including Paint Matching

with Laminates. Frame & Flush door shutter having 5 year

warranty against attack of biological agent like termite, borers,

decay, fungi and harmful insects also warranty against

seasoning related issues like crack, bending, twisting,

warping. Laminates on shutter shall be press by cold press

method. Shutter shall be brought to site in packed PVC bags

& pvc coating shall be removed on completion of work in such

a way that shutter & Frame is free from nail mark & any

damages etc. is to be obatine dFrom Vanil Udhog Maked

Rates are also Inclusive of all Labors & Proviging 15cm. Long

8 No of Hold Fast (25mm X 5mm) & 8 No of 6 Inch S.S. but

Hinges, 100mm x 75 mm x 3mm thick, required Screw &

Nails per Frame and Fixing following S.S. Fixtures And

Fastening.Also Fixing 6mm glass on Door Shutter.Fixtures

And Fastening.

(1) Aldrops 2 No, 250mm x 16mm, (2) Door Stopper 2 No,

100mm Long, (3) Double Leg Heavy Push Door Stopper 2 No

& (4) Handle 4 No, 150mm Long X 10mm thick. Door are

Fixing as per Details Drawing & Instruction of Engineer in

charge. All Materials Used Shall be as Per approved Material

Make List of G.S.P.H.C. The Required Frame is to be

Obtained from Vanil Udhyog Maked Only.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

86 Providing, Supplying and Fixing of 32mm (Total) Thick Single 62.00 Sqm 8976.41 Rupees Eight Thousand Nine

Flush Door Shutter with 1mm Thick Laminates on Both Side Hundred Seventy Six And Paise Forty

of Shutter. Making / Construction of Flush Door is with Pine or One Only

southern Yellow Pine Filler and 2.5mm core veneer Both Side

and 0.4mm Face Veneer on Both Side with Lock rail on

Center. Flush Door Provide with Teak wood beading patti

(32mm X 12mm) on Peripheries of Flush Door with Door

Frame of Non Teak Solid Wood of size 120mm x 65mm With

Chemically Treated and Seasoned Including Paint Matching

with Laminates. Frame & Flush door shutter having 5 year

warranty against attack of biological agent like termite, borers,

decay, fungi and harmful insects also warranty against

seasoning related issues like crack, bending, twisting,

warping. Laminates on shutter shall be press by cold press

method. Shutter shall be brought to site in packed PVC bags

& pvc coating shall be removed on completion of wo`rk in

such a way that shutter & Frame is free from nail mark & any

damages etc.

Rates are also Inclusive of all Labors & Proviging 15cm. Long

6 No of Hold Fast (25mm X 5mm) & 3 No of 6 Inch S.S. but

Hinges, 100mm x 75 mm x 3mm thick, required Screw &

Nails per Frame and Fixing following S.S.

Fixtures And Fastening.

(1) Aldrops 2 No, 250mm x 16mm & Tadi 1 No, (2) Door

Stopper 1 No, 100mm Long, (3) Double Leg Heavy Push

Door Stopper 1 No & (4) Handle 2 No, 150mm Long X 10mm

thick. Door are Fixing as per Details Drawing & Instruction of

Engineer in charge. All Materials Used Shall be as Per

approved Material Make List of G.S.P.H.C. The Required

Frame is to be Obtained from Vanil Udhyog Maked Only.

87 Providing and Fixing Teak wood door frame patti 40mm x 178.00 Rmt 71.01 Rupees Seventy One And Paise One

10mm thick as per detail drawing and as directed by engineer Only

in charge. Rates are inclusive of all material, labour and taxes

etc. Complete

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

88 Providing and fixing Solid PVC Flush Door Shutters 24mm 43.60 Sqm 4513.01 Rupees Four Thousand Five Hundred

thick made fro Co- Extruded THREE LAYER RIGID PVC Thirteen And Paise One Only

Foam Sheet (Single extruded) with density not less than

Kg / cbm. Outer Layer (0.8-1mm) thick should be of Rigid

PVC with Density not less than 1400 kg/cbm including

Providing & Fixing WPC Door Frame Uperline Patti of 24mm

x 6mm Size. Door should be Water proof, Termite proof, Fire

Retardant & having good screw holding capacity. Providing &

Fixing 100% Solid Wood Plastic Composit (WPC) Door

Frame 90mm x 45mm made from Wood Plastic Composite

(Single extruded Process) material with dencity 780kg / cbm

All as per specifications & drawings etc. complete as per

direction of Engineer-in-charge, .Matirials As per GSPHCL

Approved Make list only.

89 VISITOR WAITING HALL PLYWOOD PARTITIONWITH 132.00 Sqm 4832.23 Rupees Four Thousand Eight

LAMINATE: Hundred Thirty Two And Paise

Providing and fixing 18mm thick plywood partition . The Twenty Three Only

plywood partition is laminated on top the front edges of the

plywood for telephone is to be made with 18mm thick plywood

with both side laminate finishof approved shed . The Rate

includes the cost of fixing plywood for telephone with L

bracket . plywood with 1mm approved laminate. Partition

should be madwe from plywood with laminated finish as per

detail drawing , Including side with wooden bidding patti as

per detail drawings. Rate includes the cost of all materials and

labours etc. complete as per detail drawings and instruction of

Engineer In Charge . all plywood shall be used waterproof

marine plywood . all plywood material shall be as per

approved makelist of GSPHCL.

90 Providing & Fixing of 12mm thick toughen glass as detail 11.00 Sqm 4515.03 Rupees Four Thousand Five Hundred

drawing . Rate are including of all labours and Materials Fifteen And Paise Three Only

Required for complete on site as per detailed drawing or as

per details and drawings or as per instruction of engineer in

charge . Toughen glass shall be as per the approved make

list of GSPHCL

Toughen glass shall be as per company brand name such as

modi guard, saint gobain, AIS glass india.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

91 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 39.00 No. 579.57 Rupees Five Hundred Seventy Nine

75 mm diameter with jali of the following nominal diameter of And Paise Fifty Seven Only

self cleansing design with C.I scread down or hinged grating

including the cost of cutting and making good the walls.

92 Providing & fixing PVC SWR MULTY NANHI TRAP IS:14735 49.00 No. 1122.26 Rupees One Thousand One Hundred

for drain -100mm dia. With jali of following nominal dia. Of Twenty Two And Paise Twenty Six

self cleansing design with C.I. Screwed down or Hinged Only

grating including the cost of cutting and making good the

walls. Rate are inclusive of all necessary fittings, material,

labour etc.complete as per direction of Engineer In charge.

Providing & Fixing Floor drain jali (Glossy Finish) (on N.T.) of

6" X 6"size made of Stainless Steel Grade 304 Floor Drain

Piece (Cover/Jali/Grating) With Anti Cockroach Bowl on N.T.

Rate are inclusive of all necessary fittings, material, labour

etc.complete as per direction of Engineer In charge.

93 Providing and fixing to Wall Ceilling and Floor SWR Rain 318.00 Rmt. 302.54 Rupees Three Hundred Two And

Water Pipe as Per IS-13592 of 90mm Dia. Complete with Paise Fifty Four Only

Special Flings, Compressor type Fittings, fixing with Single

Bracket/S4Channel system including making good the ceiling

and floor on terrace rain water pipe shall be 90 mm Dia. SWR

horizontal pipe and vertical pipe and 90mm bend at the end

near by Ground level rate are Inclusive of all Necessary

Fittings required for ALL FLOORS. Matirials As per GSPHCL

Approved Make list only.

94 Providing and fixing to wall, ceiling and floor U.PVC SWR 209.00 Rmt. 245.74 Rupees Two Hundred Forty Five And

soil waste pipe with ' O ' Ring 110 mm dia. of ISI13592/92- Paise Seventy Four Only

2013 (Reaffirmed 2018) or its relevant & latest edition & Pipe

fixing with Single Bracket/S4Channel system with washer for

Vertical Drain pipe, etc.complete and making good the wall

ceiling and floor. (A) 75mm dia Matirials As per GSPHCL

Approved Make list only.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

95 Providing and fixing to wall, ceiling and floor U.PVC SWR 155.00 Rmt. 471.36 Rupees Four Hundred Seventy One

soil waste pipe with ' O ' Ring 110 mm dia. of ISI13592/92- And Paise Thirty Six Only

2013 (Reaffirmed 2018) or its relevant & latest edition & Pipe

fixing with Single Bracket/S4Channel system with washer for

Vertical Drain pipe, etc.complete and making good the wall

ceiling and floor. (B) 110mm dia Matirials As per GSPHCL

Approved Make list only.

96 Provinding and fixing in position PVC COWEL VENT to pipe 21.00 No. 16.47 Rupees Sixteen And Paise Forty

75 mm dia directed Matirials As per GSPHCL Approved Make Seven Only

list only.

97 Provinding and fixing in position PVC COWEL VENT to pipe 15.00 No. 28.16 Rupees Twenty Eight And Paise

110 mm dia directed.Matirials As per GSPHCL Approved Sixteen Only

Make list only.

98 Provinding and fixing gun metal check or non return full way 10.00 No. 416.17 Rupees Four Hundred Sixteen And

WHEEL / HANDLE VALVE 25 mm dia.Matirials As per Paise Seventeen Only

GSPHCL Approved Make list only.

99 Provinding and fixing gun metal check or non return full way 14.00 No. 656.86 Rupees Six Hundred Fifty Six And

WHEEL / HANDLE VALVE 40 mm dia.Matirials As per Paise Eighty Six Only

GSPHCL Approved Make list only.

100 Provinding and fixing gun metal check or non return full way 2.00 No. 2400.86 Rupees Two Thousand Four Hundred

WHEEL / HANDLE VALVE 50 mm dia.Matirials As per And Paise Eighty Six Only

GSPHCL Approved Make list only.

101 Providing and fixing concealed or open center point to wall 120.00 Rmt 1763.13 Rupees One Thousand Seven

ceiling & floor CPVC (SDR 13.5) PIPE having National Hundred Sixty Three And Paise

Sanitation Foundation (NSF) seal for potable water of Thirteen Only

following dia. nominal bore tube fittings with Single

Bracket/S4Channel system with washer for Vertical water

supply pipe. Pipe shall be concealed or open as mention in

tender description. Pipe shall be as per approved make of

GSPHCL make list [H] 80mm Dia

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

102 Providing and fixing concealed or open center point to wall 416.00 Rmt. 654.04 Rupees Six Hundred Fifty Four And

ceiling & floor CPVC (SDR 13.5) PIPE having National Paise Four Only

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings with Single

Bracket/S4Channel system with washer for Vertical water

supply pipe. Pipe shall be concealed or open as mention in

tender description. Pipe shall be as per approved make of

GSPHCL make list [E] 50mm Dia

103 Providing and fixing concealed or open center point to wall 554.00 Rmt. 443.29 Rupees Four Hundred Forty Three

ceiling & floor CPVC (SDR 13.5) PIPE having National And Paise Twenty Nine Only

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps including

making good the wall, ceiling and floor etc. complete. Pipe

shall be concealed or open as mention in tender description.

Pipe shall be as per approved make of GSPHCL make list.

[C] 40mm Dia

104 Providing and fixing concealed or open center point to wall 100.00 Rmt 334.89 Rupees Three Hundred Thirty Four

ceiling & floor CPVC (SDR 13.5) PIPE having National And Paise Eighty Nine Only

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings with Z patti (Minimum

1.6mm thick) with 6mm Dia U Clamp with washer for Vertical

water supply pipe. Pipe shall be concealed or open as

mention in tender description. Pipe shall be as per approved

make of GSPHCL make list [D] 32mm Dia

105 Providing and fixing concealed or open center point to wall 329.00 Rmt. 251.31 Rupees Two Hundred Fifty One And

ceiling & floor CPVC (SDR 13.5) PIPE having National Paise Thirty One Only

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps including

making good the wall, ceiling and floor etc. complete. Pipe

shall be concealed or open as mention in tender description.

Pipe shall be as per approved make of GSPHCL make list.

[A] 25 mm inner dia.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

106 Providing and fixing concealed or open center point to wall 145.00 Rmt. 206.73 Rupees Two Hundred Six And Paise

ceiling & floor CPVC (SDR 13.5) PIPE having National Seventy Three Only

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps including

making good the wall, ceiling and floor etc. complete. Pipe

shall be concealed or open as mention in tender description.

Pipe shall be as per approved make of GSPHCL make list.

[A] 20 mm inner dia.

107 Providing Supplying and fixing Single Pipe Bracket System 358.00 No. 182.83 Rupees One Hundred Eighty Two And

with U Bolt Rubber Mounted for Pipe supporting clamping Paise Eighty Three Only

system for external vertical Fixed line with wall distance 3"

including nuts, bolts, fasterners etc complete as per detailed

specification and as directed by Engineer in charge.

108 Providing Supplying and fixing S4 Channel system ( S4 337.00 No. 421.58 Rupees Four Hundred Twenty One

channel + Profile Bracket + U Bolt Rubber Mounted System) And Paise Fifty Eight Only

for multiple pipes for external vertical fixed line with wall

distance 3" including nuts, bolts, fasterners etc complete as

per detailed specification and as directed by Engineer in

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

109 Provinding and laying inegrated cement based proofing 1268.00 Sqm. 888.86 Rupees Eight Hundred Eighty Eight

treatment of required thickness over the roof including 10mm And Paise Eighty Six Only

thick waterproofing cement plaster in cement plaster in

cement mortar1:3 and chaina mosaic fitting and finally

finishing the surfase with white cement slurry and slopping out

taerrace slabs with following specification laid to required

slope not flatter than 1:80 ( the thickness of water proofing

treatment near rainwater outlet or the lowest point of the

finishedslope shall not be less then 45mm, including treating

the vertical surfaseof the parapet wall up to 20cms . height

above finished level of terracing including finishing the top

with joint less water proofing plaster , curing , testing etc.

complete. Rate is including ten years performance of

guarantee bond to be given on stamp paper. (No extra shall

be paid for increase in thickness for proper slope). (A)

Applying and grouting a slurry coat of neat cemnt using

kg/sqm. of cement admixed with properly water proofing

compound conforming to IS -2645 and 10 mm thick water

proofing cement plaster in Cement mortar 1:3 over the

R.C.C.slab incl. cleaning the surface before treatment (B)

Layign cement corcretre using broken brick bats 25mm to

40mm size with 50% of cement mortar 1:4 (1cement :4

coarse sand ) over 10mm thick water proofing cement plaster

in cement mortar 1:3 (1 cement ,3 coarse sand) admixed with

proprietary water proofing compound conforming to IS

to required slope and treating similarly the adjoining walls up

to 200mm height incl. rouding of junction of walls.

C) After Two Days of proper curing applying a second floor of

cement slurry (D) Finishing the surface with china mosaic

pieces laid on 10mm thick joint less cement plaster of mix

1:3(1 cement :3 coarse sand )admixed with proprietary water

proofing compound conforming to IS :2645 and finally

finishing the surface with trowel with neat cement slurry (E)

The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curring for final taste All

above operation to be done in order and as directed and

specified by the Engineer In Charge.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

110 Providing , Fabricating and fixing M.S. GRILL/GATE of 32390.00 Kg. 74.99 Rupees Seventy Four And Paise

approved pattern fabricated from M.S. flat,square bars, round Ninety Nine Only

bars,c-channel, box pipe as per detail Drawings. Rate is

including welding with grinding. Rate is also including two

coats of Oil paint and one coat of yellow Zinc cromet primer

coat of approved brand only oil paint shall be used as per

approved material list of GSPHCL Structural steel must be of

ISI mark only.

111 Providing and fixing of stainless steel 304 grade pipe railing 62.00 Rmt 3143.43 Rupees Three Thousand One

0.90m height. Top round pipe of 50mm dia. Vertical Hundred Forty Three And Paise Forty

balustrade 50mm dia with 75mm dia S.S Katori Bottem and Three Only

25mm dia S.S Katori Top at every max. 0.90m c/c and

intermediate 3 No runners pipe with anchor fastener as per

detailed drawing & as directed by engineer in charge. Rate

are inclusive of all material, labour, taxes & polishing

Materials As per GSPHCL Approved Make list only.

112 Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on 1252.00 Sqm. 188.67 Rupees One Hundred Eighty Eight

Ceilling/Slop Surface (two coats) to give an required shap And Paise Sixty Seven Only

even shade after throughly brushing the surface to remove all

dirt and remains of loose poweder material etc. complete.

Rate are inclusive of applying two coat of lapy (Putty) and one

coat of primer on new Ceilling/Slop Surface to give and even

shade including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand papered

smooth. Fine Putty, primer , plastic emulsion paint shall be

used as per approved material list by GSPHCL ( For all floor

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

113 Finishing Wall with Plastic Emulsion Paint on Wall Surface 4461.00 Sqm. 178.14 Rupees One Hundred Seventy Eight

(two coats) to give an required shap even shade after And Paise Fourteen Only

throughly brushing the surface to remove all dirt and remains

of loose poweder material etc. complete. Rate are inclusive of

applying two coat of lapy (Putty) and one coat of primer on

new wall surface to give and even shade including thoroughly

brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth. Fine Putty, primer

plastic emulsion paint shall be used as per approved material

list by GSPHCL ( For all floor ).

114 Finishing wall with weather proof exterior emulsion paint on 2692.00 Sqm. 150.52 Rupees One Hundred Fifty And Paise

wall surface (two coats) over and above applying One Coat Of Fifty Two Only

Primer to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose

powdered materials.etc complete.Primer, Exterior emulsion

paint shall be used as per approved material list by GSPHCL (

For any height ).

115 Providing & Fixing 15mm One way Bib Tap with Wall Flange. 53.00 No. 990.61 Rupees Nine Hundred Ninety And

Rate are inclusive of all matreials, Labour & Necessary Paise Sixty One Only

Fittings etc. Complete as per Detailed Drawings,

Specifications and as per the Instruction of Engineer In

charge. The Model & Make of Bib Tap Shall be as per the

Approved Make List of GSPHCL.

116 Providing & Fixing Two way Bib Tap with Wall Flange. Rate 18.00 No. 1309.39 Rupees One Thousand Three

are inclusive of all matreials, Labour & Necessary Fittings etc. Hundred Nine And Paise Thirty Nine

Complete as per Detailed Drawings, Specifications and as per Only

the Instruction of Engineer In charge. The Model & Make of

Two way Bib Tap Shall be as per the Approved Make List of

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

117 Providing & Fixing Angle Cock with Wall Flange . Rate are 37.00 No. 665.51 Rupees Six Hundred Sixty Five And

inclusive of all matreials, Labour & Necessary Fittings etc. Paise Fifty One Only

Complete as per Detailed Drawings, Specifications and as per

the Instruction of Engineer In charge. The Model & Make of

Angle Cock Shall be as per the Approved Make List of

118 Providing & fixing CONSCEAL/FLUSH COCK 25 MM DIA. 31.00 No. 1233.57 Rupees One Thousand Two Hundred

Rate are inclusive of all matreials, Labour & Necessary Thirty Three And Paise Fifty Seven

Fittings etc. Complet as per Detailed Drawings, Specifications Only

and as per the Instruction of Engineer In charge. Materials

used for the above items Must be list approved by

119 Providing & Fixing 15mm Concealed Heavy Duty Stop Cock 12.00 No. 942.54 Rupees Nine Hundred Forty Two And

with Exposed Part & other Accessories (Sleeve, Lever, Wall Paise Fifty Four Only

Flange). Rate are inclusive of all materials, Labour &

Necessary Fittings etc. Complete as per Detailed Drawings,

Specifications and as per the Instruction of Engineer In

Charge. The Model & Make of Concealed Heavy Duty Stop

Cock shall be as per the Approved Make List of GSPHCL.

120 Provinding and fixing water Closet Squatting (ORRISSA 18.00 No. 1340.62 Rupees One Thousand Three

TYPE W. C PAN ) size 580mm first quality including Hundred Forty And Paise Sixty Two

necessary "P" or "S" trap, including jointing the trap with pan Only

& soil pipe in Cement Mortar 1:1 (1 Cement : 1 Sand) in

viterous chine white colour, Joints shall be pipe sealent. The

W.C. pan shall be used Approved by GSPHCL.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

121 Providing & Fixing Wall Hung with PVC Flush Tank, Soft Seat 18.00 No. 5470.90 Rupees Five Thousand Four Hundred

Cover & intergal "P" or "S" Trap including Jointing the Trap Seventy And Paise Ninety Only

with Pan and Soil pipe. Wall hung shall be fixed on S.S heavy

duty rack bolt having 16mm dia, 165mm length using Plastic

sleeve Make by Using Drill Bitt Only. Rate are inclusive of all

matreials, Labour & Necessary Fittings etc. Complete as per

Detailed Drawings, Specifications and as per the Instruction

of Engineer In charge. The Model & Make of Wall Hung &

Flush Tank Shall be as per the Approved Make List of

122 Providing & Fixing Health Faucets (ABS Body). Rate are 18.00 No. 565.51 Rupees Five Hundred Sixty Five And

inclusive of all matreials, Labour & Necessary Fittings etc. Paise Fifty One Only

Complet as per Detailed Drawings, Specifications and as per

the Instruction of Engineer In charge. Materials used for the

above items Must be list approved by G.S.P.H.C.L

123 Providing & Fixing Single Hole Wash Basin on Granite Slab 22.00 No. 3935.33 Rupees Three Thousand Nine

with C.I or M.S. brackete & M. I . fisher union, P.V.C water Hundred Thirty Five And Paise Thirty

pipe with Connection from Stop Cock to Pillar Tap, PVC Three Only

Bottle Trap with connection 32mm dia. C.P. brass waste

coupling with Connection 32mm dia waste Pipe up to N.T

including bottle trap,Angle cock,stop tap,piller tap etc.

Complete. Rate are inclusive of all matreials, Labour &

Necessary Fittings etc. Complet as per Detailed Drawings,

Specifications and as per the Instruction of Engineer In

charge. Materials used for the above items Must be list

approved by G.S.P.H.C.L.

124 Provinding and fixing 600mm x 450mm bevelled edge 22.00 No. 842.70 Rupees Eight Hundred Forty Two And

MIRROR or superior glass mounted on 6mm thick A.C. sheet Paise Seventy Only

of plywood sheet fixed to wooden plugs with C.P. brass

screws & washers.

125 Providing & Fixing Towel Ring. Rate are inclusive of all 22.00 No. 909.08 Rupees Nine Hundred Nine And

materials, Labour & Necessary Fittings etc. Complete as per Paise Eight Only

Detailed Drawings, Specifications and as per the Instruction

of Engineer In Charge. The Model & Make of Towel Ring shall

be as per the Approved Make List of GSPHCL..

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

126 constructing cooking platform (sandwitch type)Having Clear 32.00 Rmt 3758.21 Rupees Three Thousand Seven

Width of 65 cm (From wall toles to inner Face of Facia patti) Hundred Fifty Eight And Paise Twenty

& 84 cm high(From Floor Finish to Top Surface Of Granite One Only

Stone). The plaatform to be constructed As per Detailed

drawings With 2 Nos of Sandwitch type Vertical Supports Of

Single Side Polished kota stone , 1 Nos of Double side And

Nos of Single Side polished kota Stone support .sandwitch

platform Shall be constryucted on 20 mm thickOne side

polished kota stone slab (bottom side Polished) & 16 mm to

18 mm thick Gr4anite (Telephonic Black ) To be Laid on

Single Polished Kota Stone Slab With 10 mm thick C;m 1:3 .

TThe vertical Piece Of G5ranite At the End Of The platform

Shall Be 1.09 mt High( From Floor Finish) With Necessary

Rounding As per Drawings, The 30 mm Wide Granite(

telephonic Black) Facia Patti Fixed On existing Granite Slab

With Necessary Moulding on Both Edge of Facia Patti And

Fixede With Chemical etc complete as per Drawings And

Specification Without Stainless Steel Sink but Rate including

the cost of cutting the kota stone & granite slab For Fixing

Kitchen Sink For Required Size & Making Hole For Gas pipe

and mFixing P.V.C. bend of 25 mm Dia. The Rate are

including The cost of all Material and Labours etc. Complete.

127 Providing and fixing stainless steel ( 304 Grade ) 1mm thick 6.00 No 4268.55 Rupees Four Thousand Two Hundred

Matt / Satin Finish Kitchen sink of over all Minimum size Sixty Eight And Paise Fifty Five Only

533mmx 457mm X 203mm deep having bowl Minimum size

470mm x 395mm x 203mm with cement mortar 1:3

etc.complete.Rate including of 32mm dia.C.P.brass waste

coupling and 32mm dia.rigid PVC waste pipe upto N.T.

S.S.Kitchen Sink Shall be As per GSPHCL Approved Make

list only.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

128 Providing & Fixing Wall Mounted Sink Cock with Extended 6.00 No 1330.32 Rupees One Thousand Three

Swivel Spout & Wall Flange . Rate are inclusive of all Hundred Thirty And Paise Thirty Two

matreials, Labour & Necessary Fittings etc. Complete as per Only

Detailed Drawings, Specifications and as per the Instruction

of Engineer In charge. The Model & Make of Sink Cock Shall

be as per the Approved Make List of GSPHCL.

129 Providing & fixing in position ISI marked Rotational moulded 21000.00 Ltr. 3.91 Rupees Three And Paise Ninety One

Polyethylene double layer cylindrical vertical storage tank (IS : Only

12701) water tank size inlcuding making inlet and outlet. Over

flow and washout arrangement with G.I. connection inlcuding

using necessary M.H. for connection etc. complete with

closed cover including applying two coats of oli painting

outside the tank etc.complete As per GSPHCL Approved

Make list only.

130 Providing and fixing ball cock of approved quality as directed. 5.00 No 187.96 Rupees One Hundred Eighty Seven

(A) Copper Metal ISI Mark. (ii) 50 mm dia. And Paise Ninety Six Only

131 Providing and fixing acrylic sheet with Vinyl letter colour - 28.00 Sqm 7193.88 Rupees Seven Thousand One

2073 - dark grey for back ground and colour -2199 - white Hundred Ninety Three And Paise

letter with required screw ..etc as per required sizes Eighty Eight Only

complete etc as per specification & instruction of Engineer

132 Providing and Fixing tiles Roofing With Manglore Tiles 47.00 Sqm 1382.91 Rupees One Thousand Three

(mintaylor Roofing Tiles ) of 0.250m x 0.200m over 100 mm Hundred Eighty Two And Paise Ninety

thick mortar 1:3 (1- cement & Coarse Sand ) as instructed by One Only

Engineer Discharge.

133 Providing, supplying & fixing Stainless steel 304 grade 607.00 R.inch 101.49 Rupees One Hundred One And Paise

Surface casted letters in Gujarati/English Pattern of 350MM Forty Nine Only

Height complete as directed. Size and Coating of the S.S.

letters shall be as directed by engineer in charge. Letter shall

be fixed at any height as directed by engineer in charge.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

134 Providing I.S.I. mark 7 levers three keys brass pad lock of 67.00 No. 243.64 Rupees Two Hundred Forty Three

Navtal (Godrej) make 75mm dia on completion Project.. And Paise Sixty Four Only

135 Box cutting the road surface to proper slope and camber for 1093.00 Cum 105.75 Rupees One Hundred Five And Paise

making a base for road work including removing the Seventy Five Only

excavated stuff and depositing on the road side slope as

directed upto Any lead.

136 construction of granular sub base by providing couarse 272.00 Cum 1182.07 Rupees One Thousand One Hundred

graded spreading in uniform layer with motor grader on Eighty Two And Paise Seven Only

prepared surface mixing by mix in place method with

rotavator at OMC and compacting with vibratory roller to

achieve the desired density complete as per table 400-2

137 Supplying of graded stone aggregate of following sizes. (for 1552.00 Cum 876.19 Rupees Eight Hundred Seventy Six

W.B.M.) (3)Crushed stone aggregate for hard quality up to And Paise Nineteen Only

63mm size.

138 Spreding the stone aggregate for soling and W.B.M incl. filling 1552.00 Cum 259.92 Rupees Two Hundred Fifty Nine And

the interstics forming the surface to required camber and Paise Ninety Two Only

gradient (ii) 40mm to 63mm size.

139 supplying of murrum on W.B.M surface etc comp 301.00 Cum 299.20 Rupees Two Hundred Ninety Nine

And Paise Twenty Only

140 Spreding blidage or road crust filling the gaps in metal and 302.00 Cum 153.69 Rupees One Hundred Fifty Three And

leveling to cambert and gradient as directed (i) murrum Paise Sixty Nine Only

141 Rolling and consolidation water bound macadam (except 10160.00 Sqm 17.61 Rupees Seventeen And Paise Sixty

laterite and Kankar)including watering not exceeding 15mm One Only

thickness (Main layer including binding materials) including

filling in depression which occur during the process. (b) With

power roller 8 tonne and not exceeding 12 tonne.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

142 Construction of Concrete Road using Trimix system Having 460.00 Cum 4633.90 Rupees Four Thousand Six Hundred

any Thicknesss M-300 grade concrete mix with providing and Thirty Three And Paise Ninety Only

fixing & Removal of C Channel having Size 75mm x 75mm as

per required level slope and Thickness of concrete Road

Floor Leveling of place concrete with surface vibrator

machine, Dewatering system, device, Finishing with power

floater machine and trowel light brooming on the surface as

directed with providing expansion joint size 20 x 190mm

Using of concrete cutter Machine Including curing etc.

complete Rate are inclusive of providing and mixing

plastisizer of approved make in proporsion as per mix design

143 providing and laying and fixing 25mm thick expansion joint by 55.00 Sqmt 738.13 Rupees Seven Hundred Thirty Eight

hydro cell semi UV resistance with high performance And Paise Thirteen Only

laminaed closed cell polythene foam joint filler in sheet foam

as directed etc.comp

144 Providing laying and Filling 25mm dia Backup rod HAVING 335.00 Rmt 17.62 Rupees Seventeen And Paise Sixty

MINIMUM DENSITY 22 kg per cum (ASTMD-3575) & Two Only

compressive strength of 0.40 kg per sqm (ASTM-5249) and

finishing with polysulphide sealant etc. for 25mm wide

expansion joint.

145 providing pre-moulded asphalt filler joint as per drawing (A) 1030.00 Sqmt 696.56 Rupees Six Hundred Ninety Six And

12mm. Paise Fifty Six Only

146 Providing and fixing pre-cast Rubber Dye / steel Dye inter 4220.00 Sqmt 697.10 Rupees Six Hundred Ninety Seven

locking concrete block 60mm thick with grade of concrete And Paise Ten Only

M300 pnumatic compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 : 2006 including

35 mm Sand layer for levelling and filling the joint with sand in

proper line and level as per guidlines of IRC : SP 63-2018 etc.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

147 Providing and fixing pre-cast concrete Kerb stone of gray 1200.00 Rmt 367.01 Rupees Three Hundred Sixty Seven

cement based concrete block 30cm length, 30cm height and And Paise One Only

15cm thick of M250 grade concerete as per approved design

and including excavation for fixing in proper line and level,

filling the joint with C:M 1:3(1cement : 3 fine sand) etc

148 Provinding & laying lawn for land Scaping including watering 1350.00 Sqmt 150.00 Rupees One Hundred Fifty Only

& all labours.

149 Providing and laying PLANTATION including providing and 100.00 Nos 600.00 Rupees Six Hundred Only

fixing tree guard. Rate are also inclusive of maintaining the

tree plant in live condition at the time of completion of work at

the execution of the building i.e. intial starting time (The tree

shall be planted.)

150 Provinding and fixing SW gully trap with out CI grating brick 75.00 No. 1176.94 Rupees One Thousand One Hundred

masonary chamber and water tight CI cover with frame of Seventy Six And Paise Ninety Four

300*300mm size inside with standard weight (I) Square Only

mouth traps ©150*100mm size P or R type.

151 Construction brick masonary chamber for underground 72.00 No. 3793.18 Rupees Three Thousand Seven

C.I.inspection chamber and bends with brick having crushing Hundred Ninety Three And Paise

strength not less than 35 kg/cm2 in C:M 1:5 R.C.C. top slab Eighteen Only

with 1:2:4 mix with 8mm dia steel at 15 cm.c/c and providing

and foundation concrete 1:5:10 inside plaster 15mm thick

with cement with a floating coat of neat cement walls and bed

concrete etc. complete .Rates are also inclusive of outside

plaster 15mm thick in C:M 1:3 from top of chamber and all

side upto 45 cms. deep below ground level. (A) Inside

dimension 455mmx610mm and 450mm deep for SINGLE OR

Multi purpose pipe line. and providing and fixing precast rcc

frame with cover(over MD10 ton (rubber mould finish) inner

size 600 x450 mm with necessary fittings

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

152 Constructing Brick Masonary Chamber for underground C.I 66.00 No. 5476.93 Rupees Five Thousand Four Hundred

inspection chamber and bends with brick having crushing Seventy Six And Paise Ninety Three

stenghth not less then 35 kg/ cm2 in C.M 1:5 R.C.C top slab Only

1:2:4 mix (1 cement : 2 coarse sand :4 graded stone

aggregate 20mm nominal size ) with 8mm dia steel at 15 cm.

C.C and foundation concrete 1:5:10 inside plaster 15mm

thick with a flotting coat of neat cement walls and bed

concrete etc. complete. Rate are also inclusive of outside

plaster 15mm thick in C.M 1:3 from top of chamber and all

side upto 45cm deep for multi Or Single purpose pipe

line.(over MD10 ton (rubber mould finish) inner size 600 x850

mm with necessary fittings

153 Consrurting Manhole with RCC TOP SLAB IN 1:2:4 mix (1 30.00 Nos 12438.91 Rupees Twelve Thousand Four

cemente :2 corarse sand :4 graded stone aggregate 20mm Hundred Thirty Eight And Paise

nominal size ) found . Concrete 1:3:6 ( 1 cement :3 corarse Ninety One Only

sand : 6 brick bats 40 to 50mm size ) inside plastering 15mm

thick with c.m 1:5 ( 1 cement : 5 corase sand ) finish with a

floating coat of neat cement making channaels in cement

concrete 1:2:4 ( 1cement : 2 Coarse sand : 4 stone aggregate

20mm nominal size) finished smooth complete including

curing & testing (i) inside size 900mm x 1200mm including

with 230mm thick wall of brick masonary using brick having

crushing strenghth not less then 35 kg/Sqcm in c.m 1:5 for

multipurpose pipe line (A- type depth 0.90mt. for multipurpose

line ) Rate are also Inclusive of Providing & fixing precast

RCC cover.

154 Extra over above item No 151 for additional depth of 0.1 m or 244.00 No. 239.99 Rupees Two Hundred Thirty Nine And

part thereof beyond 450mm depth for brick masonary Paise Ninety Nine Only

chamber for (I) 610 x

155 Extra over above item No 152 for additional depth of 0.1 m 120.00 No. 322.37 Rupees Three Hundred Twenty Two

or part thereof beyond 450mm depth for brick masonary And Paise Thirty Seven Only

chamber for (I) 600 x

156 I) Extra rate for item No 153 constructing B.B. masonry for 100.00 Nos 517.78 Rupees Five Hundred Seventeen And

every additional depth of 0.1M. or Part thereof over manhole Paise Seventy Eight Only

Type A (I) for depth from 0.9M to 1.5M.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

157 Providing, supplying and Fixing Corrugated DWC HDPE 278.00 Rmt. 229.00 Rupees Two Hundred Twenty Nine

Pipes of Class SN8 Structured Wall polyethelene Piping Only

systems (Pipe with online/offline coupler and elastomeric

sealing ring) with non-smooth External Annular Corrugated

and Smooth Internal Surfaces (Double Wall) for non-pressure

underground Sewerage & Drainage application as per

EN:13476-3 including all local and central taxes,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores

etc. complete. (100mm ID Dia) Including Lowering, laying

and jointing of class SN 8 structured wall ( External Annular

Corrugated & Smooth Internal surface) Polyethylene Piping

and fittings with the help of coupler ( on line / off line )

attached with one end of pipes, sliding over the elastomeric

sealing rubber ring placed on the specified valley of the

corrugation at the spigot end, lowering the same into the

trench, laying on the lower bedding (constructed at bottom of

trenches) at prescribed gradient,depth & alignment ,testing

the water tightness of the joints, ensuring the continuity tests

of specified pipe segments etc. complete as per

drawing,specifications & detailed engineering, including

carriage of pipes & fittings from site stacks to the place of

laying etc. as per direction of Engineer-in-charge.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

158 Providing, supplying and fixing Corrugated DWC HDPE Pipes 606.00 Rmt. 396.00 Rupees Three Hundred Ninety Six

of Class SN8 Structured Wall polyethelene Piping systems Only

(Pipe with online/offline coupler and elastomeric sealing ring)

with non-smooth External Annular Corrugated and Smooth

Internal Surfaces (Double Wall) for non-pressure

underground Sewerage & Drainage application as per

EN:13476-3 including all local and central taxes,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores

etc. complete. b150 mm ID Dia) Including Lowering, laying

and jointing of class SN 8 structured wall ( External Annular

Corrugated & Smooth Internal surface) Polyethylene Piping

and fittings with the help of coupler ( on line / off line )

attached with one end of pipes, sliding over the elastomeric

sealing rubber ring placed on the specified valley of the

corrugation at the spigot end, lowering the same into the

trench, laying on the lower bedding (constructed at bottom of

trenches) at prescribed gradient,depth & alignment ,testing

the water tightness of the joints, ensuring the continuity tests

of specified pipe segments etc. complete as per

drawing,specifications & detailed engineering, including

carriage of pipes & fittings from site stacks to the place of

laying etc. as per direction of Engineer-in-charge.

159 Providing , laying (to level or slopes) and jointed reiforced 510.00 Rmt 671.30 Rupees Six Hundred Seventy One

concrete light duty non pressure pipe IS class NP2 of 300 And Paise Thirty Only

mm diameter with collars and but ends prepaired for collar

joints including testing of joints complete.

160 Providing , laying (to level or slopes) and jointed reiforced 250.00 Rmt 353.20 Rupees Three Hundred Fifty Three

concrete light duty non pressure pipe IS class NP2 of 250 And Paise Twenty Only

mm diameter with collars and but ends prepaired for collar

joints including testing of joints complete.

161 Prroviding & Fixing precast RCC Frame with cover MD 10 10.00 Nos 1702.00 Rupees One Thousand Seven

Ton ( Rubber Mould Cover ) Inner size 600 x 450 mm with All Hundred Two Only

Necessary Fittings as per Engineer-In-Charge

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

162 Prroviding & Fixing precast RCC Frame with cover MD 10 10.00 Nos 2012.50 Rupees Two Thousand Twelve And

Ton ( Rubber Mould Cover ) Inner size 600 x 850 mm with All Paise Fifty Only

Necessary Fittings as per Engineer-In-Charge

163 Providing laying, testing & commissioning of 'C' class heavy Rupees Nil

duty MS Pipe conforming to IS 1239/3589 i/c fittings like

elbows, tees, flanges, tapers, nuts bolts,gaskets etc. in

ground including welding, excavation & providing cement

concrete blocks as supports, anticorrosive treatment with

coaltar/asphalt tape as per IS 10221, refilling the trench etc.

of following sizes complete as required.

(A) 150 mm dia 440.00 Rmt 4282.61 Rupees Four Thousand Two Hundred

Eighty Two And Paise Sixty One Only

164 Providing, Laying, testing & commissioning of following sizes

C-Class (Heavy Duty ) MS pipes conforming to IS 3589 &

IS:1239 part I &II along with all accessories including all

fittings like tees, elbows, reduce, union, flanges, rubber

gaskets, nuts bolts, washers etc on wall/ceiling with suitable

clamps as supports & painting with two or more coats of

synthetic enamel paint of required shade after applying primer

complete as required

(A) 150 mm dia 134.00 Rmt 3606.90 Rupees Three Thousand Six Hundred

Six And Paise Ninety Only

(B)100 mm dia. 104.00 Rmt 2581.50 Rupees Two Thousand Five Hundred

Eighty One And Paise Fifty Only

(C)80 mm dia. 90.00 Rmt 1910.39 Rupees One Thousand Nine Hundred

Ten And Paise Thirty Nine Only

(D)50 mm dia. 90.00 Rmt 1306.57 Rupees One Thousand Three

Hundred Six And Paise Fifty Seven

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

(E)25 mm dia. 60.00 Rmt 772.19 Rupees Seven Hundred Seventy Two

And Paise Nineteen Only

165 Providing, fixing, testing and commissioning of Butterfly valve

class PN1.6 rating of following sizes conforming to IS:

complete with fitting, flange, rubber gasket, GI bolts, nuts,

washers etc. as required. with all material , labour etc.

complete as per direction of engineer in charge.

(A) 150 mm dia 2.00 Nos 8170.27 Rupees Eight Thousand One

Hundred Seventy And Paise Twenty

Seven Only

(B)100 mm dia. 4.00 Nos 6101.45 Rupees Six Thousand One Hundred

One And Paise Forty Five Only

(C) 50 mm dia. 4.00 Nos 3452.30 Rupees Three Thousand Four

Hundred Fifty Two And Paise Thirty

166 Providing, fixing, testing and commissioning of non-return

valve of following sizes conforming to IS: 5312 complete with

rubber gasket, GI bolts, nuts, washers etc. as required,

(A) 150 mm dia 2.00 Nos 15845.08 Rupees Fifteen Thousand Eight

Hundred Forty Five And Paise Eight

(B)100 mm dia. 4.00 Nos 9945.68 Rupees Nine Thousand Nine Hundred

Forty Five And Paise Sixty Eight Only

167 Providing and fixing Single headed internal hydrant having 24.00 Nos 6886.72 Rupees Six Thousand Eight Hundred

outlet of 63 mm dia(2.1/2”) N.B. hydrant (IS:5290) (Type-A) Eighty Six And Paise Seventy Two

landing valve in SS Morris Pattern instanteous coupling type Only

with required hardwares.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

168 Providing and fixing of 63 mm SS branch pipe nozzle 24.00 Nos 2854.62 Rupees Two Thousand Eight

conforming to IS 903, suitable for instantaneous connections Hundred Fifty Four And Paise Sixty

to hose coupling etc. as required Two Only

169 Providing & fixing 63mm dia 15 m long RRL hose pipe with 24.00 Nos 3916.23 Rupees Three Thousand Nine

63mm dia male and femal couplings duly bound with GI wires, Hundred Sixteen And Paise Twenty

revates etc. confirming to IS 636 (typa-A) as required Three Only

Stainless steel (grade 304)

170 Providing, fixing, testing and commissioning of Weather proof 24.00 Nos 3154.48 Rupees Three Thousand One

standard fire Hose Cabinet fabricated from 18 guage sheet, Hundred Fifty Four And Paise Forty

floor mounting type having Double Opening with M.S. Eight Only

Fabricated Stand, necessary locking arrangement by allan

key. (750x600x250mm)

171 Supplying and fixing specially designed SS 304 orifice plates 24.00 Nos 1204.79 Rupees One Thousand Two Hundred

(minimum 6 mm plate thickness) to be fitted between flange Four And Paise Seventy Nine Only

and landing valve of external & internal hydrant outlets of

hydrant valves for reducing delivery pressureto 3.5 kg/ sq.cm

at hydrant valve

172 Supplying and fixing First Aid hose reel with MS construction 24.00 Nos 7920.84 Rupees Seven Thousand Nine

spray painted in post office red, conforming to IS 884 with Hundred Twenty And Paise Eighty

upto date amendments, complete with the following as Four Only

required. 30m long ,25mm (nominal internal) dia water hose

thermoplastic (textile rainforced) type-2 as per IS:

25mm (nominal internal) dia S.S.Shut up valve & nozzle.

Drum and brackets for fixing the equipments on wall.

Connections from riser with stop valve (GM) & M.S. pipe.

173 Supply, Installation, Testing & commissioning of 25mm dia 24.00 Set 608.08 Rupees Six Hundred Eight And Paise

gun metal ISI mark Gate Valve with 25mm dia nipple as Eight Only

complete as directed.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

174 providing & fixing emergency escape signes/ printed on rigid

PVC sheet / acrylic sheet 4 mm thick photoluminescent auto

glow type of approved quality including fixing on door, wall,

celling complete with installation as directed.

A. Escape Signes 6000.00 SQ.INC 9.39 Rupees Nine And Paise Thirty Nine

B. Fire Signes 5000.00 SQ.INC 9.39 Rupees Nine And Paise Thirty Nine

C. Fire Signes 5000.00 SQ.INC 9.39 Rupees Nine And Paise Thirty Nine

175 Supplying and fixing of fire brigade connection of cast iron 6.00 No 6093.41 Rupees Six Thousand Ninety Three

body with gun metal male instantaneous inlet couplings And Paise Forty One Only

complete with cap and chain as reqd. for suitable dia MS pipe

connection conforming to IS 904 as required : 2 way 100mm

176 Providing, fixing, testing & commissioning of Flow Switch van 4.00 No 6770.57 Rupees Six Thousand Seven

type 65mm with all material , labour etc. complete as per Hundred Seventy And Paise Fifty

direction of engineer in charge. Seven Only

177 Providing, fixing, testing and commissioning of 15 mm dia 24.00 No 503.01 Rupees Five Hundred Three And

quartzoid bulb type sprinklers of ratings 68 degree centigrade Paise One Only

with required accessories:

Pendent sprinkler

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

178 Getting provisional NOC and Final NOC and Renewal of NOC 1.00 Job 16950.00 Rupees Sixteen Thousand Nine

for Fire hydrant , sprinkler system , Fire Extinguisher, Fire Hundred Fifty Only

alarm system etc.

from local fire authority or any other relevant statutory

authority ya tinitial stage and requiredvariouso ther stage of

construction work, includeing preparationo of reports/

drawings as per firre authority requirement. Rate also

includes renewal of fire NOC during defect liability period as

per requiremnet. Main agency has to give demonstration of all

fire system to fire officer police/ concern beneficiaries &

GSPHCL. Agency has to submit FDR of approved bank as

per clause 2.0, section 3, of RS 20000.00 or Quoted rate

which ever is higher to GSPHCL for minimum maturity period

of four years in favour of GSPHC, which will be released after

sucessful submitting of All fire NOC shall be submitted final

S.D proposal . agency has to born charges like preparing and

submission of all the documents, photographs, CD/DVD

required together NOC from fire & emergency department

well before starting civil & the fire hydrent working including

sump & pump room work. for that professional & experinces

fire agency has to be preparied with go fire hydrant

system,sprinkler system, fire alarm system ,DG set etc. as

per tender item and making floor layout of all fire pump panel,

cable earthing etc in pump room. if any changes required in

drawing of sump & pump room .

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

main agency has to conform in written before excavation of

pump & sump room. Agency has to calculate the total head

and discharges required as per NBC/local fire offices

requirement and as per site situation and submit fire oummp

OEM specification curve foundation details etc & get approval

of cable, panel drawings 7 sppecification. after completion of

fire hydrent realted works as per pre NOC.,

TENDER specification & drawing approvd by fire department,

agency has to do site visit with fire department & give the

testing & demonstration to fire officer & get the final NOC

before handling over of the building . Agency has to give live

testing & demonstraion of all system to GSPHCL & POLICE

DEPARTMENT JOINTLY. Agency has to quote the rate as

per latest Gazettein respective tender item .

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

(Electrical Item)

179A Providing & Erecting Point wiring with 1.1 KV grade ISI marked 2 X 335.00 Point 481.00 Rupees Four Hundred Eighty One

1.5 sq. mm copper PVC insulted FRLS wire with 1.5 sq. mm (green) Only

copper PVC insulated FRLS wire for earth continuity in FIA

approved ISI mark medium class white colour 20/25 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive

solution erected on/in Brick Wall / slab along with continuous G.I.

fish wire to draw wires and laid in approved manner zari for PVC

pipe and boxes shall be filled with cement mortar and finishing the

surface to match the wall / ceiling complete with approved make 5/6

Amp. ISI make modular type switch and accessories mounted in

G. G.I. company fabricated metallic box covered with appropriate

front plate modules erected flushed with wall / ceiling with

necessary modular lamp holder / modular ceiling rose / HD

Connector 75 mm deep GI box if require ( make & model approved

by EIC and matching colour with switches accessories) as directed

for concealed wiring. Light point. Cat.-III.(Conductor resistance

should be as per IS:8130/1984 ) Necessary sheet must be erected

on all box to prevent mortar going into the box.& for ceiling light

Point & Junction box use deep Junction box of same PVC Pipe

make . Length of point wiring must not increase than 10 mtr. For

that necessary switch boards and their locations must be finalised

before execution by agency otherwise payment will not be done for

extra long point. (For future extention, if required, agency has to

erect one higher size metal box and modular plate as per instruction

of EIC. Cost of blank plate shall be paid as per tender item) [Wire

must be having box packing][This item include

cleaning(inside/outside) of all GI switch boards,electric point box,fan

box,MCBDB & box cutting plaster finishing for modular plate without

179B For Two Way Controlled Light Point, Cat.-III 2.00 Point 598.00 Rupees Five Hundred Ninety Eight

179C For Secondary Point, Cat.-III 5.00 Point 166.00 Rupees One Hundred Sixty Six Only

179D For Bell Point, Cat.-III 7.00 Point 481.00 Rupees Four Hundred Eighty One

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

179E For Fan Point.(with 6A Modular type switch and Two Module 103.00 Point 668.00 Rupees Six Hundred Sixty Eight Only

hum free 5/6 step EME step type Electronic fan regulator

both having ISI Make ) Cat-III

179F For Two way controlled Fan point (with 6A Modular type 2.00 Point 785.00 Rupees Seven Hundred Eighty Five

switch and Two Module hum free 5/6 step EME step type Only

Electronic fan regulator both having ISI Make ) Cat-III

179G For separate Point (with 6 Amp. Switch & 3/5 pin socket both 30.00 Point 505.00 Rupees Five Hundred Five Only

having ISI mark) Cat. III

179H For Looped on switch board (with 6 Amp. Switch & 3/5 pin 131.00 Point 255.00 Rupees Two Hundred Fifty Five Only

socket both having ISI mark) Cat. III

180 Providing and erecting modular type accessories mounted on 6.00 Each 788.00 Rupees Seven Hundred Eighty Eight

20G G.I. company fabricated galvanised metal box covered Only

with approriate front plate modules erected flushed with

wall/Ceiling with 1 Nos. TV Socket,1 Nos. of 16 Amp SP

Switch & 3 Nos. of 6 Amp 3/5 pin plug. [For TV Switch board]

181 Providing and erecting Plug Point wiring with 1.1 KV grade 54.00 Point 738.00 Rupees Seven Hundred Thirty Eight

ISI marked approved make 2 x 2.5 sq.mm copper PVC Only

insulated FRLS wire with 1.5 sq.mm (green) copper PVC

insulated FRLS wire for earth continuity in FIA approved ISI

mark white colour medium class 20/25 mm dia. embossed

rigid PVC pipe with PVC fitting fixed with adhesive solution

erected in brick wall/slab along with continuous G. I. fish wire

to draw wires and laid in approved manner zari for PVC pipe

& boxes shall be filled with cement mortar & finishing the

surface to match the wall / ceiling complete with 16 Amp

Modular type Swich and accessories mounted in 20 G. GI

company fabricated metallic box covered with appropriate

front plate modules erected flushed with wall. (a) 16 Amp

switch & 1 No. 6/16 A universal socket white colour suitable

for 3 pin top duly both having ISI mark. (Necessary Sheet

Must Be Erected On All Box To Prevent Mortor Going In To

The Box) Cat.-III

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

182 Plug Point wiring with 1.1 KV grade ISI marked approved 15.00 Point 863.00 Rupees Eight Hundred Sixty Three

make 2 x 4.0 sq.mm copper PVC insulated FRLS wire with Only

1.5 sq.mm (green) copper PVC insulated FRLS wire for earth

continuity in FIA approved ISI mark white colour medium

class 20/25 mm dia. embossed rigid PVC pipe with PVC

fitting fixed with adhesive solution erected in brick wall/slab

along with continuous G. I. fish wire to draw wires and laid in

approved manner zari for PVC pipe & boxes shall be filled

with cement mortar & finishing the surface to match the wall /

ceiling complete with 16 Amp Modular type Swich and

accessories mounted in 20 G. GI company fabricated

metallic box covered with appropriate front plate modules

erected flushed with wall. (a) 16 Amp switch & 1 No. 6/16 A

universal socket white colour suitable for 3 pin top duly both

having ISI mark. (Necessary Sheet Must Be Erected On All

Box To Prevent Mortor Going In To The Box) Cat.-III

183A Providing following type of Modular Type Accessories 37.00 Each 159.00 Rupees One Hundred Fifty Nine Only

mounted with 20 G company fabricated metalic box, single

mounting base frame covered with textured / metallic front

plate, modules erected with necessary connection. As desired

by Engineer in charge. RJ-11 Telephone Socket. [A] For One

Gang Cat.-III.

183B Providing and erecting following type of Modular Type 175.00 Point 25.00 Rupees Twenty Five Only

Accessories mounted with 20 G G.I. company fabricated

metalic box, single mounting base frame covered with

textured / metallic front plate, modules erected with necessary

connection. As desired by Engineer in charge. Blank Plate

Single, Cat.-III

183C Modem Jack for Computer Open RJ-45. Cat.-III. 39.00 Each 159.00 Rupees One Hundred Fifty Nine Only

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

184 Providing & erecting Switch board for Computer or electric 39.00 Each 1122.00 Rupees One Thousand One Hundred

apparatus consisting of following items in single board Twenty Two Only

erected on 20 G. G.I. company fabricated metallic box

erected with appropriate front plate modules erected flushed

with wall as directed. 1 no. 6/16 Amp. universal Socket, 1 no.

13 Amp. international socket, 2 nos. 16 Amp. indicator

switch, 2 nos. 6 Amp. Switch & 2 nos. 6 Amp. 5 pin Plug. For

Computer power Supply board. Cat.-III

185A Providing and laying Mains with FRLS PVC Insulated wire ISI 1390.00 Mtr. 62.00 Rupees Sixty Two Only

marked 1.1 KV grade with FIA approved ISI mark medium

class 20/25/32 mm dia. embossed rigid PVC pipe with PVC

fitting fixed with adhesive solution to be erected on/in brick

wall / slab along with continuous G. I. fish wire to draw mains

laid in approved manner with plastering by cement mortar &

finishing the surface to match the wall / ceiling complete with

FRLS PVC insulated wire for earth continuity. (Approved ISI

make only) For 2 x 1.5 sq.mm. FRLS copper multi stranded

conductor mains with 1.5 sq.mm. FRLS copper multi

stranded conductor for earthing as per standard colour code.

[Wire must be having box packing] (Conductor Resistance

Should be as per IS:8130/1984)

185B For 2 x 2.5 sq.mm. FRLS copper multi stranded conductor 665.00 Mtr. 82.00 Rupees Eighty Two Only

mains with 1.5 sq.mm. FRLS copper multi stranded

conductor for earthing as per standard colour code. (with

20/25/32 mm dia. PVC pipe) [Wire must be having box

packing] (Conductor Resistance Should be as per

185C For 2 x 4.0 sq.mm. FRLS copper multi stranded conductor 50.00 Mtr. 111.00 Rupees One Hundred Eleven Only

mains with 2.5 sq.mm. FRLS copper multi stranded

conductor for earthing as per standard colour code. (with

20/25/32 mm dia. PVC pipe) [Wire must be having box

packing] (Conductor Resistance Should be as per

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

185D For 2 x 6.0 sq.mm. FRLS copper multi stranded conductor 440.00 Mtr. 146.00 Rupees One Hundred Forty Six Only

mains with 2.5 sq.mm. FRLS copper multi stranded

conductor for earthing as per standard colour code. (with

20/25/32 mm dia. PVC pipe) [Wire must be having box

packing] (Conductor Resistance Should be as per

185E For 2 x 10.0 sq.mm. FRLS copper multi stranded conductor 50.00 Mtr. 234.00 Rupees Two Hundred Thirty Four

mains with 4.0 sq.mm. FRLS copper multi stranded Only

conductor for earthing as per standard colour code. (with

20/25/32 mm dia. PVC pipe) [Wire must be having box

packing] (Conductor Resistance Should be as per

185F For 4 x 4.0 sq.mm. FRLS copper multi stranded conductor 105.00 Mtr. 179.00 Rupees One Hundred Seventy Nine

mains with 2.5 sq.mm. FRLS copper multi stranded Only

conductor for earthing as per standard colour code. (with

20/25/32 mm dia. PVC pipe) (for MCBDB mains) [Wire must

be having box packing] (Conductor Resistance Should be as

per IS:8130/1984)

186A Providing and erecting Medium Class FIA approved and ISI 830.00 Mtr. 24.00 Rupees Twenty Four Only

mark white colour (embossed) RIGID PVC PIPES of following

size complete erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & clamps on / in wall /

ceiling along with continuous fish wire to draw mains with

necessary fittings and junction boxes for following dia. For

186B For 25 mm. dia. 1050.00 Mtr. 33.00 Rupees Thirty Three Only

187 Providing & Erecting following size of TV Co-axial flexible 190.00 Mtr. 39.00 Rupees Thirty Nine Only

cable comprising inner conductor of solid bare copper

insulated with Foam PE & Secondary conductor made of poly -

Aluminium film bonded Al. Braids @ suitable coverage

overall sheathed with black PVC insulation.For RG-6 (RR

Cable, Finolex)

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

188 Providing and erecting approved make single phase Double Door metal 15.00 Each 5869.00 Rupees Five Thousand Eight

clad D.B. as per relevant indian standards ammended upto date. Supplying

Hundred Sixty Nine Only

and fixing following way single phase MCB distrubution board of company

fabricated with sheet box with powder coated inside and outside after apply

seven tank chemical process of CRPA sheet (MCBDB Door, Backside &

Body must be made of 1.2 mm thick CRPA sheet )cover complete with

suitable integral single piece construction tinned copper busbar and link

with all necessary interconnection and with necessary size MS frame for

mounting MCBDB. Manufacturer must be provided (1) IP 43 and as per

IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank

Powder coating Certificate (3) Tinned Copper/Brass make neutral &

Earthing link with isolation & Protecting Cover for 240 Volts on surface /

recess complete with loose wire box, terminal connectors for all incoming

and outging circuits, with suitable size FRLS PVC insulated copper

conductor up to terminal blocks and internal connection, tinned coppper

bus bar, 1 no. tinned copper neutral link, tinned copper earth bar, din bar,

detachable gland plate, interconnections, powder painted including earthing

etc. Single phase incoming and horizontal single phase outgoing. For

Way MCBDB: Including 40 Amp. 30 mA double pole ELCB (ELCB

confirming to IS:12640/1988 having sensitivity of 30 mA and breaking

capacity of 10 KA), MCB 40 Amp. double pole switch (C curve confirms to

IS:8828 having breaking capacity of 10 KA) and S.P. MCB of rating 6 to

Amp. with NL suitable to operate on 240 Volt A.C. power. (6/25 Amp sp

DBs should be used of same company of MCB / ELCB to be used)

(MCBDB must be erected in line & level with spirit level and finish the

external edge with box cutting plaster) (Same colour MCB(SP/DP) should

be used as same as MCBDB) [Including Necessary numbering / marking

on box done with red colour radium sticker as per site requirement and

instructions given by EIC on site. Font / number size given by EIC on site

as per requirement]

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

189 Providing ad erecting approved make single phase Double Door 1.00 Each 1369.00 Rupees One Thousand Three

metal clad D.B. as per relevant indian standards ammended upto Hundred Sixty Nine Only

Supplying and fixing following way single phase MCB distrubution

board of company fabricated IK 10 certificate with sheet box with

powder coated inside and outside after apply seven tank chemical

process of MS sheet cover complete with suitable integral single

piece construction tinned copper busbar and link with all necessary

interconnection and with necessary size MS frame for mounting

MCBDB. Manufacturer must be provided (1) IP 43 and as per

IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven

tank Powder coating Certificate (3) Tinned Copper/Brass make

neutral & Earthing link with isolation & Protecting Cover for

Volts on surface / recess complete with loose wire box, terminal

connectors for all incoming and outgoing circuits, with suitable size

FRLS PVC insulated copper conductor up to terminal blocks and

internal connection, tinned coppper bus bar, 1 no. tinned copper

neutral link, tinned copper earth bar, din bar, detachable gland

plate, interconnections, powder painted including earthing etc.

Single phase incoming and horizontal single phase outgoing. For

Way MCBDB (The DBs should be used of same company of MCB /

ELCB to be used) (MCBDB must be erected in line & level with spirit

level and finish the external edge with box cutting plaster) (Same

colour MCB(SP/DP) should be used as same as MCBDB) [Including

Necessary numbering / marking on box done with red colour radium

sticker as per site requirement and instructions given by EIC on site.

Font / number size given by EIC on site as per requirement]

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

190 Supply, Installation, Testing and Commissioning of 1200 75.00 Each 2603.00 Rupees Two Thousand Six Hundred

sweep, BEE 5 Star rated, Max. 30 Watt Ceiling fan with Brush Three Only

Less Direct Current (BLDC) permanent ferrite magnet Motor,

class of insulation: B/E, Doble ball bearings, Rust free

nos.Aluminium blades, 2 nos. canopies, shackle kit with

earthing provision, copper winding, Power factor not less

than 0.9, Service Value (CMM/W) minimum 7.5, Air delivery

minimum 220 CMM, Minimum 345 RPM, 230v (tolerance as

per IS : 374-2019), THD less than 10%, compitible with

electronic regulator unit for Five Speed Control and all

remaining accessories including safety pin, nut bolts,

washers, temperature rise equal to 75 degree C (Max.),

suitable for 140 to 285 Voltage and rectifier circuit with surge,

over current and overload protection , 50 Hz, Single phase AC

Supply, earthing etc. Complete as required. Down road: up to

1.0 mtr as per site requirment. [ Make shall be approved by

Engineer in Charge] (A) 1200 mm Sweep (48") (Make Havells

Efficiencia Dx, Bajaj Energos 28 & Crompton make & model

approved by EIC subject to above specification)

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

191 Providing, erecting, testing Ceiling Fan confirming to IS: 37.00 Each 1929.00 Rupees One Thousand Nine Hundred

374/1979 AMDT No. 1 to 6 Class-I, 50 Hz. Specification of Twenty Nine Only

Ceiling Fan must be as per below. (1) Sweep: 1200 mm, (2)

Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4)

Power Consumption: maximum 53W, (5) RPM: minimum

330, (6) Service value:min 4.3 m3/min. (7) Class of insulation:

'B', (8) No. of heavy duty premium quality Ball bearing: Two,

(9) Total Body: Top & Bottom should be alluminium, (10)

Blade: Aluminium approx 1.1 mm thick, (11) Colour: White

high grade powder coating, (12) Canopy: Two Nos. Heavy

duty, (13) Condenser: Min. 1.5 MFD (15% Tolerence) as per

IS:1709-1984, (14) Down road: up to 1.0 mtr as per site

requirment, (15) Required fixing accessories, (16) 3 core

0.75 sq.mm ISI wire as per site requirment, (17) No vibration

and noise due to mechanical parts. (18) Safety wire provided

by manufacturer with ceiling fan. (Agency has to erect safey

wire with ceiling fan and checked with EIC) (OEM has to

approved model as per tender specification and tested at

192 Supplying & Erecting Fan Hook Of 10 mm M.S Round bar 102.00 Each 125.00 Rupees One Hundred Twenty Five

bounded to the RCC bars up to 50 mm Length each side & Only

piereced through 18 Gauge G.I Box having 125 mm dia depth

of 75 mm complete erected concealed in ceiling with

necessary modular plate / sheet

193 Supplying and erecting approved make oscillating type 5.00 Each 2509.00 Rupees Two Thousand Five Hundred

bracket fan A.C. 23OV. 50cy/s 400/450 mm sweep wall Nine Only

mounted with height adjustment and rotary tilting device

complete with guard, flexible Core plug top complete erected

with lead wires as directed.

194 Supplying and erecting approved make Cabin fan of 230V. 5.00 Each 1527.00 Rupees One Thousand Five Hundred

A.C. 50 Cy/s. 400 mm. sweep oscillating type complete Twenty Seven Only

erected with lead wires as directed. Cat.II

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

195 Supplying & erecting approved make low noise Decorative 22.00 Each 1687.00 Rupees One Thousand Six Hundred

exhaust fan having size150- 200 mm with 1350 RPM with Eighty Seven Only

round / square frame ABS/metalic body with Grill / inbuilt

196 Supplying & erecting single phase approved make industrial 5.00 Each 2034.00 Rupees Two Thousand Thirty Four

exhaust fan suitable for medium duty ring mounted low noise Only

operation suitable for medium duty having following dia size

and maximum speed in RPM for 305 mm dia 900 RPM cat -iii

197 SITC of Indoor Commercial Recess / Surface mounted (IP20) 211.00 Each 751.00 Rupees Seven Hundred Fifty One

24 W Cool/Warm white Color LED Down lighter office Lighting Only

Luminaire with separate potted driver with single piece

pressure die cast aluminium alloy housing with corrosion

resistant powder coated finish with PMMA/PS/Injection

moulded Polycarbonate diffuser with high brightness LED

complete, CRI > 80, with 24 W. The LED's should be

mounted on metal core PCB for better heat conduction and

long life of LED. The Fixture should comply all International

Standarad third party (LM 79 for complete fixture, LM80 for

individual LED). The Fixture have protection like miswiring,

over voltage, over load, wrong wiring, THD < 15%,, P.F >

0.95, efficacy > 90 lm/w & driver efficiency > 85%. For 24 W

fixture wide voltage range from 160 V to 270 V, 50/60 HZ @

240V application, 2 KV surge protection.The fixure must have

min. 2160 lumen light output.The fixture should be provided

with external separate Potted driver, latest Valid BIS approved

Luminaire and driver. The Fixture efficacy > 90 lumens/watt

only for safety and performance. (L70 @ 30,000 Hrs.) The

fixture should be able to easily mount on POP / Grid false

ceiling. The Luminiare should be tested as per IP 20 and

following test reports should be submitted at the time of

approval: heat resistant test, thermal test, Ingress protection

test, drop test, Photobiological report with 3 core X

Sq.mm. flexible wire as per site requirment [Note:-The

manufacturer / authorized Channel partner of the

manufacturer has to submit 5 yrs. free replcement Guarantee

for complete Fixture]

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

198 Supplying and Erecting LED indoor fitting of approximately 73.00 Each 370.00 Rupees Three Hundred Seventy Only

4feet long with LED of wattage 0.2W to 0.5W assemble on

single MCPCB with housing use as a heat sink shall be made

from Aluminum extrusion having enough strength (sample must

approved by EIC) with polycarbonate diffuser with following

specification:(A) Company mark/name on the fitting.

(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.

(C) Rated input wattage: max. 24w

(D) Rated input current : 0.2 Amp

(E) Power Factor : Min.

(F) ATHD : Max. 15%

(G) Rated Luminous flux: Min. 2420 lm

(H) CCT: 6500K

(I) CRI: Min. 80Ra

(J) Driver Efficiency: Min. 80%

(K) LED life span: Min. 50000 Hrs @ L70

(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.

(M)Surge protection : Min. 2KV

(N) IP rating: IP

(O) IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be

(Q) Fixing clamp design & strength should be sufficient to hold

the fitting erected on wall or ceiling.

(R) 3 core copper wire of appropriate size with earthing connector

(Note:-The manufacturer/ authorized Channel partner of the

manufacturer has to submit 5 yrs free replacement Guarantee

for complete Fixture) [Approval will be given strictly subject to

item specification]

199 Supplying and Erecting 8 W LED Lamps with following 60.00 Each 111.00 Rupees One Hundred Eleven Only

wattage capacity of 220 to 240 voltage, minimum

burning hours life, 500v in built- surge protection,

Polycarbonate diffuser , mounting suitable for E14 / E27 / B22

lamp holders, P.F >=0.5 (A) LED lamps integral type with pc

diffuser suitable LAMP holder.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

200 Providing and erecting max. 10 W LED battern having main 10.00 Each 309.00 Rupees Three Hundred Nine Only

housing aluminium extruded and front cover of polycarbonate.

Electrically and photomatry parameters are as under:240 V,

50 Hz. System wattage.:10W+10%, PF>=0.95, system

lumens min. 1000, CCT- 3000K to 6500K, CRI>=80,

THD<=15%, Delivery efficiency>=85%, LM 80 certified LED,

30000 Hrs@ L70, Electronic CC driver, insulated copper

wire, for internal wiring, IP20 Operating voltage:160 to 270 V,

Surge-2 KV, length of this fitting should be 2ft.

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

capacity between the ranges shown.) Tube Light with integral

driver 8 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet

201 Providing and erecting Polycarbonate body surface mounting 6.00 Each 780.00 Rupees Seven Hundred Eighty Only

LED Bulk head type 9 watt Lighting Fitting with electronic

driver having THD<15% ,CRI>80,P.F.>0.95 And lumen output

from luminaire 800lm , input voltage range 90-300VAC , 50Hz

cool white(3000 to 6500k), inbuilt driver having THD >

80lm/w., -20degC to +60degC working temperature, AL frame

with Beam Angle 120deg.

202 Providing and erecting Decorative Ding Dong call bell Stereo 7.00 Each 170.00 Rupees One Hundred Seventy Only

type 250 Volt complete erected on existing polished wooden

block or in M.S. box with 3 mm thick white ISI mark laminated

sheet. (Anchor (chime), Vision, Rider make)

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

203 Providing & erecting weather proof, dust & vermin proof, floor 7.00 Sq. Mtr. 16230.00 Rupees Sixteen Thousand Two

mounted front operated indoor type cubical panel board having IP42 Hundred Thirty Only

& above protection as per require made from 2 mm. thick CRC M.S.

sheet for outer body & doors, 1.5 mm. thick CRC M.S. sheet for

internal partitions with necessary supporting angles, flats including

skirting, bending, drilling, welding, riveting with internal partitions &

cable alley as per requirements & instruction of engineer-In-Charge

with erection of supplied switchgears, busbars with suitable size of

interconnecting PVC copper wire / Copper-Aluminium strips, rubber

gromets, rib, control wires, backelite control fuses, measuring

instruments, earth bus & earth bolts, foundation flange-bolts-base

plates, sufficient nos. of hinged doors, handle with locking

arrangement, rubber gasket complete with Required Nos. heavy

Duty Connector. heavy duty end terminal connection,danger notice

board,necessary ventilation,earthing strip complete.The panel shall

be supplied with Seven Tank chemical process which shall be

carried out before applying painting, painted with powder coating.

(The rates excludes the cost of switchgears, busbars,

interconnecting mains & Copper / Aluminium strip, fuse, meters etc.

The dimension shall be measured excluding base beams) Factory

inspection for verification of quality,workmanship and as per

drawing & testing before dispatch the material as per tender

condition. The standard companies switch gear shall be used and

only manufacturers at CPRI approved factory as per IEC 61439 and

shall be certified by that company whose switch gears are used

after fabrication for beneficial use. With 350 mm depth

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Panel manufacturer have to give 5 years maintenance and service

support if in case of breakdown or fault. Panel manufacturer have to

submit electrical meter calibration report. Agency should design the

panel in such a way that there should not be any excess in panel

area (sq.mtr) & length of bus bar (mtr), if any excess occurs draw

attention to GSPHCL at the time of approval of G.A. drawing.

Loading and unloading of above item shall be done by hydra and

skill work force under supervision of electrical engineer and

guidelines given by manufacturer to avoid damage to the item.

Picture of it to be submitted in running bill / final bill.

Size of door and Ele. room / Pump room shall be checked by

agency's engineer before giving order. If found any problem in size

discuss with GSPHCL engineer for rectification before giving order.

[Including Necessary numbering / marking on PANEL done with red

colour radium sticker as per site requirement and instructions given

by EIC on site. Font / number size given by EIC on site as per

requirement]

204A Supplying and erecting tripple pole & neutral 440V / 500 V 4.00 Rn. Mtr. 1942.00 Rupees One Thousand Nine Hundred

Panel mounting Copper Busbars with four equal Nos. of Forty Two Only

electrolyte bus having current density not more than 1.6 Amp.

/ sq.mm (Rated current / cross section area) duly wraped with

colour insulating tape for phase sequence of following current

carrying capacity, erected with necessary bus bar supports /

insulators, main cable socket to each bar, erected in existing

cubical panel with necessary connections.For electrolyte

copper busbars (A) Suitable for 100 Amp. Capacity

204B Suitable for 200 Amp. capacity 2.00 Rn. Mtr. 3171.00 Rupees Three Thousand One

Hundred Seventy One Only

204C Suitable for 300 Amp. capacity 3.00 Rn. Mtr. 4861.00 Rupees Four Thousand Eight

Hundred Sixty One Only

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

205 Providing and Erecting approved make Four pole moulded 3.00 Each 6112.00 Rupees Six Thousand One Hundred

case circuit breaker having breaking capacity ICU of 25 KA. at Twelve Only

415 V. having normal current rating 25 A to 100A. with

variable or Fixed thermal & magnetic release suitable to work

on A.C.supply 50 c/s. with all internal connections,spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICu only.

206 Providing and Erecting approved make Four pole moulded 2.00 Each 7976.00 Rupees Seven Thousand Nine

case circuit breaker having breaking capacity ICU of 35 KA. at Hundred Seventy Six Only

415 V. having normal current rating 125A. with variable or

Fixed thermal & magnetic release suitable to work on

A.C.supply 50 c/s. with all internal connections,spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICu only.

207 Supplying and Erecting Approved make Four pole moulded 2.00 Each 20739.00 Rupees Twenty Thousand Seven

case circuit breaker having breaking capacity ICU of 35 K.A. Hundred Thirty Nine Only

at 415 V. having normal current rating 250 A. with Variable or

fixed thermal & magnetic release suitable to work on

A.C.supply 50 c/s. with all internal connections spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. housing. ICS=100% of ICU only

208 Providing & Erecting (A) Extended operating rotary handle 7.00 Each 865.00 Rupees Eight Hundred Sixty Five Only

with pad lock with three position trip,off,on suitable for 25A to

250 A panel mounting ( company must be same as

switchgher company)

209A Supplying and erecting Approved make Earth fault Relay 2.00 Each 4934.00 Rupees Four Thousand Nine Hundred

suitable to mount with inter connection to moulded case Thirty Four Only

circuit breaker having CT ratio & MCCB rating as following

along with shunt trip 220 V AC with all internal connections &

complete erected in existing M.S.housing.125-200 A., CT

Ratio 1/200

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

209B Supplying and erecting Approved make Earth fault Relay 1.00 Each 5362.00 Rupees Five Thousand Three

suitable to mount with inter connection to moulded case Hundred Sixty Two Only

circuit breaker having CT ratio & MCCB rating as following

along with shunt trip 220 V AC with all internal connections &

complete erected in existing M.S.housing. For 250 A -400 A

CT Ratio 1/400

210 Supply, Installation, Testing & Commissioning of Three 3.00 Each 6319.00 Rupees Six Thousand Three Hundred

Phase, 440 V Surge Suppressor protection Device (SPD) & Nineteen Only

40 Amp. TPN MCB (or as per SPD OEM guideline for the

protection of SPD which is erected such a way that it can be

operated easily) with MS Enclosure & necessary required

Core x 6.0 Sq.mm. size flexible copper cable for Connection.

SPD Must be Capable to Protect all electrical and electronic

equipments. If SPD Blast or Fuse then the panel Builder must

have replace it soon during defect liability period. The Detail

Specification are As per Attached sheet with Annexture-A(E)

(Hakel,OBO, Iskira make) (With Five year Gaurantee /

211 Supplying & erecting approved make Four Pole 415 V change 1.00 Each 13221.00 Rupees Thirteen Thousand Two

over switch interior for panel mounting with operating Hundred Twenty One Only

mechanism A.C.23 duty confirming to I.S.S. (E) for 250 Amp.

212 Providing & erecting Miniature circuit breaker single pole 6 39.00 Each 111.00 Rupees One Hundred Eleven Only

Amp. to 25 Amp. suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark.

213A Providing & erecting 240 V MCB Double pole switch for Motor 2.00 Each 297.00 Rupees Two Hundred Ninety Seven

& Inductive Load (c curve) having 10 KA breaking capacity & Only

confirms to IS:8828 in Existing M.S. box having following

capacity. For 6-32 Amp.

213B Providing & erecting 240 V MCB Double pole switch for Motor & 27.00 Each 327.00 Rupees Three Hundred Twenty

Inductive Load (c curve) having 10 KA breaking capacity & Seven Only

confirms to IS:8828 in Existing M.S. box having following capacity.

For 40 Amp.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

214A Providing & erecting 415 V MCB Four Pole for Motor & 15.00 Each 662.00 Rupees Six Hundred Sixty Two Only

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity

For 40 Amp.

214B Providing & erecting 415 V MCB Four Pole for Motor & 9.00 Each 730.00 Rupees Seven Hundred Thirty Only

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity

For 63 Amp.

215 Providing & erecting 415 V MCB Four Pole for Motor & 5.00 Each 1104.00 Rupees One Thousand One Hundred

Inductive Load (C Curve) having 10KA breaking capacity & Four Only

confirms to IS :8828 With same company metal box having

following capacity [c] 40 Amp.

216 Providing and erecting Approved make RCCBs conforming to IS: 1.00 Each 2213.00 Rupees Two Thousand Two Hundred

12640 and having sensitivity of 30 mA and Short Circuit withstand Thirteen Only

capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic component. for

following Max. rating erected as directed (ii) 40 Amps. DP

217 Supplying & fixing box for housing RCCB + MCB combination 8.00 Each 442.00 Rupees Four Hundred Forty Two Only

made of 18 SWG sheet steel duly powder coated with gasket,

dust & vermin proof bakelite shield two earthing terminals for

following type of RCCB, RCCB + MCB For 4 Pole

218 Providing and erecting metalic danger notice board for 4.00 Each 69.00 Rupees Sixty Nine Only

MEDIUM VOLTAGE installation to be erected as per I.S.

219 Supplying and erecting approved make panel mounting type 3.00 Each 1263.00 Rupees One Thousand Two Hundred

Digital Voltmeter having 3 x 1/2 digits LED display, 0 to 750 Sixty Three Only

AC Volts range having 0.5 class acuracy erected on existing

panel board with all connection, wiring etc. with manufacturers

calibration certificate.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

220 Supplying and erecting approved make panel mounting type 3.00 Each 1543.00 Rupees One Thousand Five Hundred

Digital Ammeter having 3 digits LED display, external CT Forty Three Only

operated, calibrated for 0 to 1000 Amps. suitable to operate

on 500 Volt AC having 0.5 class acuracy, erected on existing

panel board with all connection, wiring etc. with manufacturers

calibration certificate.

for 3 phase AC Supply 500 V on existing panel board with Only

necessary connections.

222 Supplying and erecting approved make set of indicator lamps 5.00 Each 43.00 Rupees Forty Three Only

of LED type lamp, lense cover, Bakelite holder complete

erected with necessary connections.

223 Providing & erecting L.T. Current Transformer with bar 9.00 Each 272.00 Rupees Two Hundred Seventy Two

primary 50/5 to 1000/5 ratio 15 VA burden having 0.5 class Only

acuracy erected in existing CRCA box duly secured with

insulating materials connected to the meter

224 Supplying & erecting 12 mm thick backelite sheet of approved 3.00 Sq. Mtr. 2289.00 Rupees Two Thousand Two Hundred

make and grade on 25 x 25 x 3 mm red oxide painted angle Eighty Nine Only

iron frame suitable for fixing ICDP SWITCH and energy

meter (contractor shall make approved drawing of Bakelite

sheet To arrange required No. of Energy meter & ICDP switch

-busbar etc. as per Actual space available in electrical room

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

225A Providing & Erecting 2.0 mtr. long Earthing system by making 13.00 Each 7025.00 Rupees Seven Thousand Twenty Five

minimum bore of 225 mm dia. in soft soil. Suitable for doing Only

pipe-in-pipe technology earthing. Earthing electric rod must be

made from Corrosion free hot dip galvanizing pipes having

following specification.

(A) Earthing Electrode: outer Pipe: - 88 mm minimum O.D., 'B

' Class ISI mark of Reputed Brand, Inner pipe: - 42 mm

minimum O.D., Pipe B Class ISI mark reputed Brand.

Terminal Size: 70 mm X 100 mm length, Terminal should be

made from inner pipe for that pipe must be pressed and gave

rectangular shape so its work as a terminal. The hot deep

galvanising must be done after above process. Galvanised

thickness must be minimum 75 micron anywhere. SS Nut

bolt:- 2 nos. with washer suitable for 14 mm dia. hole must be

provided at terminal. Total minimum Weight (approx.) of earth

electrode with inside conductive material be 26 kg.

(B) Inner chemical (CCM Compound):- Resistivity:- 0.2 ohm/

meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt

at no load & dry form, Sulphur content:- <2%

(C) Back fill Compound:- Earthing compound should be

capable to retain moisture for long time. Back Filling

Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of

400 mm X 400 mm X 400 mm depth and Cover should be

heavy duty cast iron with required size of 300 mm X 300 mm

X 4 mm thick.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL

accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed

laboratory.

4. General test report from OEM regarding specification of

[Make and model approved by EIC Strictly subject to item

specification only] [OEM has to submit all detail & sample for

approved before supplying]

[Water must be poured in bore before starting earthing.

Earthing value must be measured with earth tester. Agency

has to bring the earth resistance to at least 02 ohms & voltage

between neutral & Earthing upto 02 volt. Agency has to

maintain earthing & its value for one year. Earthing must be

done in the presence of A.E. (GSPHCL)]

225B For above earthing (2 mtr) additional charges for boring in 13.00 Each 276.00 Rupees Two Hundred Seventy Six

hard rock soil (by breaker) & filling soft soil in earth pit Only

(certificate for soil have to given by DEE / AE along with

photographs)

226A Providing & Erecting Mains with ISI marked, 1.1 KV grade 70.00 Mtr. 37.00 Rupees Thirty Seven Only

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS:694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. For One wire 4.00 sq. mm

226B One wire 6.00 sq. mm 90.00 Mtr. 56.00 Rupees Fifty Six Only

226C One wire 10.00 sq. mm 130.00 Mtr. 91.00 Rupees Ninety One Only

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

226D One wire 16.00 sq. mm 210.00 Mtr. 141.00 Rupees One Hundred Forty One Only

226E One wire 25.00 sq. mm 70.00 Mtr. 234.00 Rupees Two Hundred Thirty Four

226F One wire 70.00 sq. mm 40.00 Mtr. 663.00 Rupees Six Hundred Sixty Three Only

227A Supplying and erecting approved make GRP/FRP Perforated 70.00 Rn.Mtr. 230.00 Rupees Two Hundred Thirty Only

type Cable Tray Material – Corrosion Resistant Polyester

Flame Retardant U.V. Stabilized Resin System -

Manufactured from Pultruded Sections- Polyester Resin

System, Glass Content : 55 – 60 % - - Standard Length :

3000 mm- Support Span – 1500 mm, Deflection L/200 -

Specification NEMA FG1 1993- UV Resistant - Flame

Retardant – IS 6746 - Appendix K/UL 94, Very Low

Flammability - Specification Followed NEMA FG1

Oxygen Index – Minimum 30% as per ASTM D 2863 - Flame

Spread (Extent of Burning) – 20 mm as per Standard ASTM

D 635 - Tensile Strength – 4000 – 8000 Kg/Cm2 as per

Standard ASTM D 638 - Flexural Strength – 2500 –

Kg/Cm2 as per Standard ASTM D 790- Izod Impact Strength

– 130 Kg/Cm2 as per Standard ASTM D 256- Compressive

Strength – 2500 – 5000 Kg/Cm2 as per Standard ASTM D

695- Barcol Hardness – 50 – 65. Width 150 mm, Side

Member “C” Section : 75 x 25 x 25mm with 4mm wall

Thickness , Loading 15Kg./Mtr.

227B For Width 300 mm, Side Member “C” Section : 100 x 35 x 50.00 Rn.Mtr. 526.00 Rupees Five Hundred Twenty Six

35mm with 4mm wall Thickness , Loading 30Kg./Mtr. Only

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

228 Supplying & erecting bank of all polypropylene condenser 25.00 KVAR 690.00 Rupees Six Hundred Ninety Only

(APP type) with standard capacity of 2,3,5,7, 10,12.5 &

KVAR units of P.F. correction for operation on 3 phase 50 c/s,

400 /440V (+ / - 10%) with externally discharging resistance,

earthing terminal & built on angle iron of channel iron frame

work and provided with terminal cover box. Complete erected

on provided iron bracket or on floor duly tested by license.

229A Providing & fixing 20 mm. dia. PVC insulated G.I. 50.00 Mtr. 31.00 Rupees Thirty One Only

Corrugated Flexible pipe with necessary socket, PVC bushes

saddle, Check-nuts etc. complete of following sizes.

229B Providing & fixing 25 mm. dia. PVC insulated G.I. 20.00 Mtr. 37.00 Rupees Thirty Seven Only

Corrugated Flexible pipe with necessary socket, PVC bushes

saddle, Check-nuts etc. complete of following sizes.

230 Supplying and erecting M.S./G.I. metal box having 16 Gauge 3000.00 Sq. Inch 5.81 Rupees Five And Paise Eighty One

painted with red oxide be concealed in wall with necessary Only

plastering & finishing with 3 mm thick laminated sheet with

grooving as directed of following depth 3" depth.

231A Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked 150.00 Mtr 218.00 Rupees Two Hundred Eighteen Only

armoured Aluminium conductor cable for 1100 volt to be laid

90 cms. Under ground or to be laid on wall with 1.00 m.m

thick G.I. heavy guage cable clamp or in existing DWC pipe

underground or road crossing or floor . For 3*1/2 core 35 Sq.

mm (16 Sq. mm 1/2 core) (From Main Panel To Female

Barrack Panel)

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

231B Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked 80.00 Mtr 486.00 Rupees Four Hundred Eighty Six Only

armoured Aluminium conductor cable for 1100 volt to be laid

90 cms. Under ground or to be laid on wall with 1.00 m.m

thick G.I. heavy guage cable clamp or in existing DWC pipe

underground or road crossing or floor 3 1/2 core 95 Sq.

mm ( 50 Sq. mm 1/2 core)

231C Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked 850.00 Mtr. 152.00 Rupees One Hundred Fifty Two Only

armoured Aluminium conductor cable for 1100 volt to be laid

90 cms. Under ground or to be laid on wall with 1.00 m.m

thick G.I. heavy guage cable clamp or in existing DWC pipe

underground or road crossing or floor . For 4 core 16 Sq.

231D Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked 200.00 Mtr. 189.00 Rupees One Hundred Eighty Nine

armoured Aluminium conductor cable for 1100 volt to be laid Only

90 cms. Under ground or to be laid on wall with 1.00 m.m

thick G.I. heavy guage cable clamp or in existing DWC pipe

underground or road crossing or floor .For 4 core 25 Sq. mm

232 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 510.00 Mtr. 361.00 Rupees Three Hundred Sixty One

cable multistrand Copper conductor for 1.1 KV. to be laid on Only

wall with necessary clamps 1.00 mm thick to be laid 90 cms

underground with 1.00 mm thick G.I heavy duty grade or in

existing trench / pipe at road crossing or floor of following

size of cables.(A) 4 core 4 Sq. mm

233A Providing & laying HDPE Double walled corrugated pipes 1000.00 Mtr. 117.00 Rupees One Hundred Seventeen

(DWC) (conforming to IS: 16205 (part 24) 2018)) with Only

minimum load required of 450N capacity with anti rodent and

ultra violet material properties with necessary connecting

accessories of same material at required depth to be laid

cms. under ground for laying of cable below ground / road

surface for enclosing cable and back filling the same to make

ground as per original. (A) For Outer dia. 50 mm and Inner

dia. 38 mm. (Test Certificate to be Submitted)

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

233B For Outer dia. 90 mm and Inner dia. 75 mm. (Test Certificate 450.00 Mtr. 150.00 Rupees One Hundred Fifty Only

to be Submitted)

234 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 20.00 Mtr. 340.00 Rupees Three Hundred Forty Only

cms. below ground across the road crossing or on floor with

necessary material in an approved manner and making the

ground as per original.(C) 300 mm dia

235A Providing & fixing Double compressed heavy duty flange type 66.00 Nos. 43.00 Rupees Forty Three Only

brass cable gland with rubber ring for P V C insulated

armoured cable complete with outgoing tails, insulating tape

etc. For following size cables. For 2 to 4 core x 4.0 Sq. mm

(Sigma, MCI, Comet, HMI Make Only)

235B Providing & fixing Double compressed heavy duty flange type 34.00 Each 57.00 Rupees Fifty Seven Only

brass cable gland with rubber ring for P V C insulated

armoured cable complete with outgoing tails, insulating tape

etc. For following size cables. For 2 to 4 core x 16.0 Sq. mm

235C Providing & fixing Double compressed heavy duty flange type 10.00 Each 66.00 Rupees Sixty Six Only

brass cable gland with rubber ring for P V C insulated

armoured cable complete with outgoing tails, insulating tape

etc. For following size cables. For 2 to 4 core x 25.0 Sq. mm

235D Providing & fixing Double compressed heavy duty flange type 6.00 Each 75.00 Rupees Seventy Five Only

brass cable gland with rubber ring for P V C insulated

armoured cable complete with outgoing tails, insulating tape

etc. For following size cables. For 3*1/2 core X 35/50 Sq. mm

(Sigma, MCI, Comet Make Only)

235E Providing & fixing Double compressed heavy duty flange type 6.00 Each 130.00 Rupees One Hundred Thirty Only

brass cable gland with rubber ring for P V C insulated

armoured cable complete with outgoing tails, insulating tape

etc. For following size cables. For 3 & 1/2 core 95 Sq. mm

(Sigma, MCI, Comet Make Only)

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

236A Providing & fixing Solderless crimping type Aluminium lugs 136.00 Each 15.00 Rupees Fifteen Only

conforming to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved

manner. For 16/25 Sq.mm. Alumium Cable

236B For 35/50 Sq.mm. 6.00 Each 20.00 Rupees Twenty Only

236C For 95 Sq.mm. 16.00 Each 40.00 Rupees Forty Only

237 Providing & fixing Solderless crimping type Copper lugs 364.00 Each 8.00 Rupees Eight Only

conforming to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved

manner. [a] 1.5/2.5 to 6 Sq.mm

238 Providing, erecting, fabricating the M.S. structure as per 200.00 Kg. 74.99 Rupees Seventy Four And Paise

requirement of site as per structure design Including proper Ninety Nine Only

size approved by EIC of M.S. angles, flats, bars, square pipe,

channels, sections (Tata, Jindal, Asian, JSI Make) complete

with cutting, welding, grinding and finishing duly painted with

Asian/Nerolac make premium quality oil paint and true care

red oxide metal primer,asian paint make with erection on site

as per direction of engineer in charge with necessary grouting

cementing, plastering and finishing complete. All hole opening

of square pipe end must be closed with M.S plate welding.

Payment will be done on KG as per Actual weight.

239A Supplying and laying UPVC cable trunking system comprising 80.00 Mtr. 275.00 Rupees Two Hundred Seventy Five

unplasticised polyvinyl, chloride rigid material with ignition free Only

& flame proof confirming BS .All necessary accessories and

measuring of following sizes. For 75 mm x 50 mm trunking

(MK/ LEGRAND / OBO)

239B For 50 mm x 50 mm trunking(MK/ LEGRAND / OBO) 70.00 Mtr. 187.00 Rupees One Hundred Eighty Seven

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

240 Providing and erecting required size Copper strip for earthing 5.00 KG 787.00 Rupees Seven Hundred Eighty Seven

of H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. Only

using copper clamp.

241 Providing and erecting open well type horizontal submersible 2.00 Each 25730.00 Rupees Twenty Five Thousand Seven

mono block pump set with cast iron body having following Hundred Thirty Only

specification [E] For 3 phase open well horizontal mono block

pump set suitable for 630 LPM discharge at required head as

per plumbing length and vertical & Horizontal head. Agency

has to submit the details calculation of head to GSPHCL and

get approval of make and model of pump having tender

specification with TDS & GA drawing. Suitable for 65 mm dia

delivery pipe with 10 mtr. necessary Size 3 Core Flat copper

flexible cable. (Body: Cast iron / Winding : Copper / stator :

Copper / rotor : Copper / shaft : SS / Carbon material test

certificate from manufacture shall be submitted). The

model of the pump with respect to head and discharge will be

approved by EIC. Pump should have following specifications:

(1) Minimum 10 mtr. Cu. flat cable of suitable size must be

provided with pump. (2) Pump shall be installed as per

manufacturer foundation/erection drawing or as per IS

specification. (Body full C.I., stator winding- copper, rotor-

copper, shaft- SS / carbon material, motor-Energy efficiency)

242 Lowering of existing submersible motor pump set complete 2.00 Each 1272.00 Rupees One Thousand Two Hundred

with required No. and size of pipes by means of proper chain Seventy Two Only

pulley block and pipe wrenches. Job includes stacking of

pipes cronologically after the checking of threads. For open

well horizontal submercible pump set for sump well. (i) 7.5 HP

243A Providing & erecting ISI make medium duty (B class) 40.00 Mtr. 260.00 Rupees Two Hundred Sixty Only

galvanized MS pipe with coupling, bend, union, reducer, tee,

MS flange etc. with plumbing charges. [d] 50 mm dia

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

243B Providing & erecting ISI make medium duty (B class) 40.00 Mtr. 342.00 Rupees Three Hundred Forty Two

galvanized MS pipe with coupling, bend, union, reducer, tee, Only

MS flange etc. with plumbing charges. [d] 65 mm dia

244A Supplying and erecting C.I. Swing check type non-return 3.00 Each 1010.00 Rupees One Thousand Ten Only

(reflux) valve ISI marked with packing, flange, nuts and bolts

etc.suitable for following pipe size. [B] For 50 mm dia.

244B Supplying and erecting C.I. Swing check type non-return 3.00 Each 1475.00 Rupees One Thousand Four Hundred

(reflux) valve ISI marked with packing, flange, nuts and bolts Seventy Five Only

etc.suitable for following pipe size. [B] For 65 mm dia.

245 Supplying Water tight M.S.Box of size 20 x 15 x 15 cms. to 2.00 Each 232.00 Rupees Two Hundred Thirty Two Only

erect suitable kitkat fuse / MCB to be . erected on polished

wooden board inside the box with hinged/sliding door with

rubber rings and erected on pole with suitable pole clamp, all

duly painted with one coat of red oxide and two coats of

paints. (Cost of Fuse / MCB shall be taken extra) [Provision

for motors cable joints near sump]

246 Providing and erecting ISI marked PVC insulated PVC 40.00 Mtr. 171.00 Rupees One Hundred Seventy One

Sheathed Flat flexible Submersible copper cable approved Only

make of following Size. (A) For 3 Core x 6 Sq. mm.

247 Providing water proof straight joint in PVC insulated flat 2.00 Each 188.00 Rupees One Hundred Eighty Eight

flexible copper cable by using insulated material water Only

proofing material and making the joint complete. UP to

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

248 Supplying and erecting approved make 7.5 HP DOL type 1.00 Each 47338.00 Rupees Forty Seven Thousand Three

motor control cubical panel made from 16 G. CRCA sheet Hundred Thirty Eight Only

duly epoxy powder painted inside and outside with hinged

doors and locking arrangement Floor Mounting On 300 mm

Height with MS Stand Angle & CC Foundation. Size 35 mm

(H) x 35 mm (W) x 05 mm (D). The detail specification &

quantity of material used are as under.

Panel must be with minilec relay for auotmatic change over

for pump 1 & 2 logically without using manually change over

switch (Minimum Panel Size: 1.10 meter (H) x 1.10 meter (W)

x 0.25 meter (D).

INCOMMER SECTION: (1) MCCB-30 KA-FP (DU-100H), Rupees Nil

Rating: 63 Amp., Make: L&T, Qty: 01 No. (2) Digital Ammeter

(SR-65), Rating: 0-60 Amp., Make: Meco, Qty: 01 No. (3)

Salzer, Qty: 01 No. (4) Digital Voltmeter (SR-65), Rating: 0-

Rating: 6 Amp., Rotary, Make: Salzer, Qty: 01 No. (6) C.T.-

Current Transformer, Rating: 60/5 Amp., Make: Virat, Qty:

Nos. (7) Indicating Lamps (R,Y,B), Rating: 22.5 mm LED,

Make: Airon, Qty: 03 Nos. (8) SP MCB , Rating: 20 Amp.,

Make: L&T, Qty: 03 Nos. (9) Control Wiring, Rating:

Sq.mm, Make: Any ISI, Qty: Lot (10) Copper Busbar, Rating:

63A/100 Amp., Qty: Lot (11) Numeric logical relay, Qty: 1 No.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Outgoing Feeder (7.5 HP DOL Feeder): Qty: 02 Nos. (1) MCB-

FP-10 KA, Rating: 32 Amp., Make: L&T, Qty: 02 Nos. (2)

Power Contactor (415 V) Main, Rating: 18 Amp., Make: L&T,

Qty: 02 Nos. (3) Over Load Relay, Rating: 9-15 Amp., Make:

L&T, Qty: 02 Nos. (4) Digital Ameter (SR-65), Rating: 0-30

Amp., Make: Meco, Qty: 02 Nos., (5) Digital Voltmeter (SR-

65), Rating: 0-500 V, Make: Meco, Qty: 02 Nos. (6) Indicating

Lamps (Start,Run,Trip), Rating: 22.5 mm LED, Make: Airon,

Qty: 04 Nos. (7) Push Button (Start,Stop), Rating: 22.5 mm,

Make: Airon, Qty: 04 Nos. (8) SPP, Rating: 415 V, Make:

Space, Qty: 02 Nos. (9) Terminal, Rating: As per Amp., Make:

Airon, Qty: 04 Nos. (10) Control Wiring, Rating: 1.0 Sq.mm.,

Make: Any ISI, Qty: Lot (11) Power Wiring, Rating: As Per

Amp., Make: Any ISI, Qty: Lot

Outgoing Feeder (6 Amp. - 01 No.) For Capacitor (1) MCB-FP-

10 KA, Rating: 6 Amp., Make: L&T, Qty: 01 No. (2) Capacitor-

MPP Type, Rating: 3 KVAr, Make: Concap, Qty: 01 No., (3)

Power wiring, Rating: As Per Amp., Make: Any ISI, Qty:Lot

Outgoing Feeder (32 Amp. - 01 No.) For Lighting (1) MCB-FP-

10 KA, Rating: 32 Amp., Make: L&T, Qty: 01 No. (2) Power

wiring, Rating: As Per Amp. (3) Earthing Strip: 25 x 3; G.I.

Strip, Qty: 01 No. (4) MCB-DP-10KA, Rating: 20 A, Make:

L&T, Qty.:01 Nos.

249 SITC of Vertical Air Termination Solid aluminium with Base- 4.00 Each 9323.00 Rupees Nine Thousand Three

10 mm dia and 1000 mm long. Air Termination Base tested Hundred Twenty Three Only

for conditioning, Ageing Test & Lightning impulse current

withstand test: 100 kA of 10/350µs waveform in an accredited

Third party laboratory as per 6.3 & 6.4 of IEC 62561-1

protocol with MAST 34mm dia 3000 mm long- Cold

Galvanized (DHEN,OBO, JEF, CAPE)

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

250 SITC of 8 mm dia solid Aluminium Conductor for roof top 160.00 Mtr 297.00 Rupees Two Hundred Ninety Seven

mesh grid and tested as per IEC 62561- 2 conducted in the Only

Govt. accredited thirty party laboratory to meet the

requirement of IS/IEC 62305 with Required Accessories -

Aluminium Holding clamp at every 1 mtr distance,

Aluminium/SS/polimide cross splicer at every crossing of Alu.

conductor, Expansion piece with connectors at every 20 mtr

distance, Aluminium straight Splicer to connect conductors.

All Accessories should be tested as per IEC 62561-1

Cl. 6.3 for conditioning & Ageing Test & 6.4 for Lightning

impulse current withstand test: 100 kA of 10/350µs

waveform(Ageing & Electrical test ) conducted in a sequence

manner & tested in the Govt. accredited Third party laboratory

to meet the requirements of IS/IEC

6230JEF,CAPE,OBO,BATTERMAN,DEHN MAKE ONLY]

251 SITC of Galvanized Steel Flat 25x6 mm thickness from earth 80.00 MTR 153.00 Rupees One Hundred Fifty Three

electrode directly in ground as required. Zinc coating: 500 Only

g/m square (Approx:70 micron coating) tested and used

exclusively for lightning protection earthing system and ring

equipotential bonding.

252 SITC of 14.2 mm dia 3 mtr long Earth electrode of High 4.00 Each 5933.00 Rupees Five Thousand Nine Hundred

tensile steel electrode with 250 micron copper bonding & 1 Thirty Three Only

bag of Carbon fill Based environment friendly backfill tested

as per IEC 62561-7 in NABL accredited Laboratory and

suitable stainless Steel double sided clamp. Eco Friendly rust

proof heavy duty weather proof Polyethylene Earth Pit

Chamber with following dimensions :254 mm dia (top),

mm dia (bottom) & 260 mm (height).

253A Providing & Erecting Flexible PVC insulated multistrand 1000.00 Mtr. 46.00 Rupees Forty Six Only

multicore 1.1 kv grade ISI marked copper wires of following

size to be erected as directed. 3 core 1.5 sq.mm. PVC

insulated round copper wire ISI mark.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

253B Providing & Erecting Flexible PVC insulated multistrand 180.00 Mtr. 77.00 Rupees Seventy Seven Only

multicore 1.1 kv grade ISI marked copper wires of following

size to be erected as directed. 3 core 2.5 sq.mm. PVC

insulated round copper wire ISI mark.

254 SITC of Outdoor aesthetically designed LED Street Light 28.00 Each 3512.00 Rupees Three Thousand Five

Luminaire with total consumption of Max. 45 W with single Hundred Twelve Only

piece die cast aluminium housing, high power LED shall be

mounted on high quality metal core PCB with extremely

precison designed heat sink complete with IP66 protection

Class with polycarbonate / thoughened glass cover the fixture

should be suitable for pole/bracket mounting. The fixture to

comply both LM79 and LM 80 guidelines with LED module

min. 130 lumen/watt with toughen Glass L70 at 50,000 hrs,

provided with high quality polycarbonate lenses for better light

distribution. The Fixture Should be able to be Pole Mounted

and also bracket mounted, provided with high quality driver for

protection against high and low Voltage cut Off, opertional for

high amibient and high humid envirnoments, THD of driver

should be less than 10% and P.F > 0.95. Also the Fixture

should meet the following technical criterias Oprating range

Voltage 160 to 270 V, system efficiency >= 110 lm/w, and

total lumens not less then 4950, CCT > 5000K, CRI >

beam angle 120 deg, 4kV integral & non integral surge

immunity level at least 10 KV.The Separate Potted driver

should have over current, over voltage protection, short circuit

protection so that the fixture recovers once the fault is

removed. In addition to the above product should be

operational in the temperature range of 0 deg to 50 deg and

humidity range of 10% to 90% RH.(Note:- The

manufacturer/authorized Channel partner of the manufacturer

has to submit 5 yrs free replcement Guarantee for complete

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

255 SITC of Outdoor aesthetically designed LED Street Light 4.00 Each 6117.00 Rupees Six Thousand One Hundred

Luminaire with total consumption of Max. 90 W with single Seventeen Only

piece die cast aluminium housing, high power LED shall be

mounted on high quality metal core PCB with extremely

precison designed heat sink complete with IP66 protection

Class with polycarbonate / thoughened glass cover the fixture

should be suitable for pole/bracket mounting. The fixture to

comply both LM79 and LM 80 guidelines with LED module

min. 130 lumen/watt with toughen Glass L70 at 50,000 hrs,

provided with high quality polycarbonate lenses for better light

distribution. The Fixture Should be able to be Pole Mounted

and also bracket mounted, provided with high quality driver for

protection against high and low Voltage cut Off, opertional for

high amibient and high humid envirnoments, THD of driver

should be less than 10% and P.F > 0.95. Also the Fixture

should meet the following technical criterias Oprating range

Voltage 160 to 270 V, system efficiency >= 110 lm/w, and

total lumens not less then 9900, CCT > 5000K, CRI >

beam angle 120 deg, 4kV integral & non integral surge

immunity level at least 10 KV.The Separate Potted driver

should have over current, over voltage protection, short circuit

protection so that the fixture recovers once the fault is

removed. In addition to the above product should be

operational in the temperature range of 0 deg to 50 deg and

humidity range of 10% to 90% RH.(Note:- The

manufacturer/authorized Channel partner of the manufacturer

has to submit 5 yrs free replcement Guarantee for complete

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

256 SITC of Outdoor aesthetically designed LED Flood Light 6.00 Each 10911.00 Rupees Ten Thousand Nine Hundred

Luminaire with total consumption of maximum 240 W with Eleven Only

single piece die cast aluminium housing, high power LED

shall be mounted on high quality metal core based PCB with

extremely precison designed heat sink, complete with IP66

protection Class, with polycarbonate / Toughened glass

cover. The fixture should be suitable for pole/bracket

mounting. The fixture to comply both LM79 and LM

guidelines with LED minimum 130 lumen/watt with L70 at

50,000 hrs, provided with high quality polycarbonate lenses

for better light distribution. The Fixture Should be able to be

Pole Mounted and also bracket mounted, provided with high

quality potted driver for protection against, high and low

Voltage cut Off, opertional for high amibient and high humid

envirnoments, THD of driver should be less than 10% and P.F

> 0.95. Also the Fixture should meet the following technical

criterias. Operating range Voltage 160 to 270 V, system

efficiency >= 110 lm/w, CCT > 5000K, CRI >65, beam angle

120 deg, surge immunity level at least 4KV integral & 10 KV

nonintegral. Flood Light lumens shall be not less than

(Note:- The manufacturer / authorized Channel partner of the

manufacturer has to submit 5 yrs free replcement Guarantee

for complete Fixture)

257 Providing , erecting Universal Astro Intelligent streetlight 4.00 Each 12895.00 Rupees Twelve Thousand Eight

control system Insu with weather Proof box for Indoor Hundred Ninety Five Only

application 5 KVA ( As per attached specification )

258A Supplying & erecting approved make SMC press moulded 5.00 Each 890.00 Rupees Eight Hundred Ninety Only

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with bakelite connector strip 4way & hinged doors

having locking arrangements with mounting clamp with nuts,

bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box.For (A) 300mm x

200mm x 100mm [deep]

258B For 140 x 140 x 100mm [deep] 33.00 Each 295.00 Rupees Two Hundred Ninety Five

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

259 Supplying and erecting Fabricating terminal box for street light 2.00 Each 702.00 Rupees Seven Hundred Two Only

pole made from 16 SWG M.S. sheet having following size

complete with fixing arrangement for terminal board, with

necessary hole for wire entry and exit from the box. The box

shall be provided with cover and hinges on one side and

bolting at other end The box shall be fixed by clamps

fabricated from 25mm x 6mm flat.The box shall be painted

with one coat of red oxide and two coats of paint having

following box size 330 mm x 260 mm x 140 mm (depth). And

Providing and fixing Terminal board of size 5.0 x 127 x

mm. bakelite sheet with 15 Amp. kitkat pattern porcelain fuse

unit with suitable brass studs with nuts, washers and clamps

of size 25 mm x 3 mm suitable for pole painted with one coat

of red lead paint. ) (Asian colour must be used)

260 Providing and Fixing of wall and terrace bracket consisting of 32.00 Each 487.00 Rupees Four Hundred Eighty Seven

ISI mark "B" class G.I. Pipe 4.2 cm outside diameter and Only

length suitable for building face for fixing the brackets and

having spread of Upto 0.70 mtr. length with suitable degree

angle as per site situation suggested by EIC. vertical plane

and suitable welded stiffner reducer and nipple with check nut

complete painted with one coat of red oxide and two coats of

alluminium paint with . complete with 150*150*2mm thick G.I

plate with 4no heavy duty galvanized jasti khila of required

size or Single arm bracket (pipe in pipe type) suitable for

terrace as per design given by EIC Considering parfait, height

,width and total height of building and type of led fitting (a)

For single arm bracket. (Jindal / Asian / Tata / Surya Prakash

make Only) (Fabricators:- Impression / Fab / Bajaj /

Impression equipment Only) (Test certificate to be submitted)

( For Wall Mounted Fitting-Bracket )

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

261 Providing and fixing of ABC Type Store Pressure Fire 14.00 Each 1991.00 Rupees One Thousand Nine Hundred

Extinguisher Having capacity 6 kg Filled with Mono Ninety One Only

Ammonium Phosphate Powder 50% confirms to IS

Stored Pressure Type, UGTS Pressure Gauge, Can Height

530 mm, Diameter 150 ± 10mm, Discharge Time 24 Sec,

Controllable discharge mechanism, Jet Range 5 Meters,

Average Discharge is 92%, applicable on Class A,B & C and

electrically started Fire, Fire Rating 4A:144B, Can

Construction : Deep drawn & CO2 Mig welded,

EPDM(Ethylene Propylene Diene Monomer) Rubber Hose

with both end Aluminum clamped, Internal Coating - Epoxy

Powder coating, External Coating - Pure Polyester Powder

coating (UV Resistant),Brass forged CE Marked valves with

NRV & Auto Safety Release with safety Pin is of SS material,

Made up from 1.6mm thick sheet, Extinguishers confirmed to

IS 15683:2018 and ISI marked. Referance Weight:-Gross

Weight 8.9 Kg, Empty Weight 2.9 Kg, 1. Necessary certificate

& and guarantee must be attached, 2. OEM has to provide

wall mounting heavy duty bracket/clamp, screw, hardware

for installation. 3.Following printed marking Manufacturing

Date and Expiry Date must be mention on Extinguisher

Refilling period must be of 3 Years. Following Printed marking

on equipment must be required:- Model No, Capacity, Gross

Weight, Content, Fire Rating, Batch No, Serial no, Mfg Month,

Refilling Due. [with necessary numbering / marking with oil

paint by painter as instructions given by G.S.P.H.C.L

engineer] (Make: KANEX, MINIMAX, CEASEFIRE)

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

262 Providing and fixing of CO2 type High Pressure Portable 4.5 14.00 Each 6526.00 Rupees Six Thousand Five Hundred

kg Fire Extinguisher, filled with Co2 Gas as per IS 15222, Twenty Six Only

Control discharge mechanism fitted with 1 Meter Wire

Braided Hose & Electrical non-conductor Polyethylene Flat

Horn with Diffuser Nozzle for dispersed discharge of CO2,

Discharge Time 12 Sec, Average Discharge is 95%,

Applicable on Class B, C and electrically started Fire, Fire

Rating 55B, Internal coating is not applicable & External

coating is of enamel spray painting, Powder Coated Handle,

Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder

construction: hot spinning by seamless pipes & bearing ISI

mark, Body confirms to IS 7285 and PESO ( Petroleum and

Explosives Safety Organization) APPROVED, Minimum Wall

Thickness 4 to 4.2 mm, Extinguishers confirmed to IS

15683:2018 and ISI marked. Referance Weight:-Gross

Weight 16.4, empty weight 11.9 Kg, 1. Necessary certificate

& and guarantee must be attached, 2. OEM has to provide

wall mounting heavy duty bracket/clamp, screw, hardware