REPAIR TO INTERNAL WATER SUPPLY, CLEANING OF WATER TANKS AND REPAIRS TO JOINERY AT AFS JODHPUR UNDER AGE B/R-I, GE(AF)NO 2 JODHPUR

Amount

Taking down Shutters of any description exc 1 sqm and n exc 2 sqm each and removing from site complete all as directed by engineer-in-charge.

Taking down chowkats or frames exe 1.5 Sqm but n.exc 4 sqm each with shutter (without taking off shutters from the frame) and removing from site complete all as directed by engineer-in-charge.

Taking down chowkhat or frame n exc 1.50 sqm each (with out taking of shutters from the frame) and removing from site complete all as directed by engineer-in-charge.

S&F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc.

Dismantling wrought iron or mild steel work of any description in any possiton not otherwise provided for complete all as directed by engineer-in-charge.

Framed work as in doors or gates, cooler stand of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive or steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing of Fe-290(Gde E-165) complete all as directed by engineer-in-charge.

S&F 1.0 mm thick Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as directed by engineer-in-charge.

S&F, 150mm Mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed including welding, painting etc complete all as directed by engineer-in-charge.

S&F 250 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed including welding, painting etc complete all as directed by engineer-in-charge.

S&F 150mm Mild steel pressed handles, oval type, stove enamelled black fixed including welding, painting etc complete all as directed by engineer-in-charge.

S&F in repairs steel windows with side hungs shutters including projecting type hinges with steel handles, steel peg stay complete with glazing bar, devetailed or welded complete all as directed by engineer-in-charge. Note:Quated rate included any size or shape of window as per drawing provided by Engr-in-charge at the time of execution.

S&F steel windows with side hungs shutters including projecting type hinges with steel handles, steel peg stay complete without glazing bar, devetailed or welded complete all as directed by engineer-in-charge. Note:Quated rate included any size or shape of window as per drawing provided by Engr-in-charge at the time of execution.

S&F frame work such as guard bars ,grills, grating etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors,ladders etc and similar wks conforming to Fe-290 grade E-165 complete all as directed by engineer-in-charge.

M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1stquality) over one coat of red oxide complete all as directed by engineer-in-charge.

S/F Flush shutters,35 mm thick paticle board core construction, with block board core and plywood face panels, commercial type on both sides complete all as directed by engineer-in-charge.

M/L for factory made, Glazed and skeleton shutters for door/window, of thickness 35mm of IInd class hard wood , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as directed by engineer-in-charge. Note: Glazed or cloth etc in panelsor sash square shall be measured seperately

S&F Galvanised MS wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as directed by engineer-in-charge.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as directed by engineer-in-charge.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as directed by engineer-in-charge.

S&F Butt hinges, medium weight, cold rolled mild steel, and fixed steel type C11 of size 100 mm .

S/F floor door stoppers of alluminiun alloy body and toung , anodised with harddrawn steel spring with overall length of cover plate is 140 mm complete all as directed by engineer-in-charge.

S&F Aluminium anodised barrel tower bolt of extruded section 150mm size complete all as directed by engineer-in-charge.

S&F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed size 300mm long complete all as directed by engineer-in-charge.

S&F extructed aluminium alloy handles, fabricated type,anodised of size 150mm complete all as directed by engineer-in-charge.

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1stquality) over one coat of pink primer complete all as directed by engineer-in-charge.

Resecuring or easying and adjusting without taking down shutters of any description(door/window) exe 1 sq.m but n exe 2.0 sqm each complete all as directed by engineer-in-charge.

Welding in repairs exc 2.5 cm & n exc 5 cm in length & thickness of metal n.exc 6 mm complete all as directed by engineer-in-charge.

S&F in repairs, 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane incl glazing clips complete all as directed by engineer-in-charge.

S&F in repairs Galvanised MS wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as directed by engineer-in-charge.

S/F in repair door closer hydraulically regulated,aluminium extruded section body designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35kg and fixed complete all as directed by engineer-in-charge.

S/F in repair floor door stoppers of alluminiun alloy body and toung , anodised with harddrawn steel spring with overall length of cover plate is 140 mm complete all as directed by engineer-in-charge.

S&F in repairs Aluminium anodised barrel tower bolt of extruded section 150mm size complete all as directed by engineer-in-charge.

S&F in repairs Butt hinges, medium weight, cold rolled mild steel, and fixed steel type C11of size 100 mm complete all as directed by engineer-in-charge.

S&F in repairs Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed size 300mm long complete all as directed by engineer-in-charge.

S&F in repairs extructed aluminium alloy handles, fabricated type,anodised of size 150mm

S&F in repairs extructed aluminium alloy handles, fabricated type,anodised of size 100mm.

S&F in repairs 100mm Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as directed by engineer-in-charge.

M&L in repairs for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed to stone/ concrete chowkats with flat iron 40x3mm size 75 cm long with necessary bolts, etc. complete all as directed by engineer-in-charge.

S& F in repairs Prelaminatd particle board, interior grade 18/19 mm thick , prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber work or other place as builtup furniture as complete all as directed by engineer-in-charge.

S & F Plain fillets 2nd class hard wood of sectional area not exe 3 sq cm , square, rectangular or triangular in section, clean sawn, secured with mills or brads complete all as directed by engineer-in-charge.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as directed by engineer-in-charge.

S& F 40 mm dia cupboard knobs fixed with nuts, screw and washer of brass polished bright finished complete all as directed by engineer-in-charge.

Taking down cement plaster on stone masonary walls including racking out joints hecking for key scrubbing down with water etc complete all as directed by engineer-in-charge.

M&L for rendering 15mm thick in CM 1:4 on stone masonry surface including finish even and smooth surfaces without using extra cement complete all as directed by engineer-in-charge.

M&L preparing new plastered surfaces and applying two coat Oil bound distemper on walls complete all as directed by engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing from site and rubbish off the premises complete all as directed by engineer-in-charge.

M&L for non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as directed by engineer-in-charge.

M&L for glazed ceramic tiles, coloured, 350x250x7mm/450x350x7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces complete all as directed by engineer-in-charge.

S&F 9 mm thick plywood in repaire, grade BWR, type BB, fixed with screws/nails to any type of frame work/surface with wooden fillets/frame whereever necessary in any possition complete all as directed by engineer-in-charge.

S/F in repairs steel handles including painting ,welding , boltings in steel windows/ ventilators etc as complete all as directed by engineer-in-charge.

S/F in repairs steel hinges including painting, welding, bolting in steel windows / ventilators ascomplete all as directed by engineer-in-charge.

S/F in repairs peg stays including paiting, welding, bolting in steel windows/ ventilators as complete all as directed by engineer-in-charge.

S&F in repair drapery rod in any length, high strengh MS pipe with corrugated PVC extrusion having outer dia 28 mm with plastic ring of ABS plastic of dia 56 to 58 mm all as complete all as directed by engineer-in-charge.

S&F in repair decorative finals ABS plastic fancy type bracket, fancy type hook in matching colour of steel powder quoted paint of same colour of rod incl all ascomplete all as directed by engineer-in-charge.

S&F in repairs solid rubber beading of 30 to 50 mm wide and 3 to 5 mm thick fixing at bottom to existing doors complete all complete all as directed by engineer-in-charge.

Making opening for desert cooler in existing window any type as per directed by Engr-in-charge, including dismantling and refixing after necessary cutting, welding, painting, of steel/wooden window with or without frame including grill in any possition, and finishing disturbed surface with stone/brick/concrete block masonary and plastering work if required complete all as directed by engineer-in-charge..

Easing of steel/wooden window, ventelator any type, in any possition including welding, re-oiling if required and chiseling, scrapping down, removing of stone/conctere/brick work or plastering work to easily movement of shutter and making smooth surface of wall/ceiling/chajja etc with necessary plastering and colouring, complete all as directed by engineer-in-charge.

S & F in repair anodised aluminium frame section powder coated for door/window/partition with one or more rebates including joining cleat for fixing and including all necessary fitting and fixescomplete all as directed by engineer-in-charge.

S & F in repair anodised aluminium door shutters/window shutter, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as directed by engineer-in-charge.

S & F Sheet glass thicness 5.5 mm,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane includin all necessary fiting and fixture complete all as directed by engineer-in-charge.

S & F in repair plane 12 mm thick PVC sheet/board of required size as partition fixed with aluminium frame including all necessary fitting for fixing complete all as directed by engineer-in-charge.

M&L for cutting shrubs, wild growth / trees and removal of plant growth by grubbing out shrubs / plants / trees or any vegetation growth n.exe 10cm girth including cutting of trunk portion protruding outside the walls / roof, digging out roots and application of chemical Glyphospate solution (4% concentration) as per manufacturer’s instructions by injecting in stem of plants and roots as directed and removing complete vegetation growth from walls including taking out roots from roof / stone / block masonry work and making good the disturbed surface with PCC 1:2:4 type B0 and necessary cement base paint and disposing off the rubbish from the site outside MoD land, for upto four story buildings (incl scaffolding) complete all as directed by engineer-in-charge.

same as item no.62 above but exe 10cm but n.exe 20cm girth.

M&L for repairs to leakage in floors of WC/Bath Room/Kitchen by breaking of existing floor and providing new PVC (SWR) floor trap/nahani trap, suitable for type ‘B’ pipes, 75 mm dia of outlet, plain with grating, including jointing with solvent cement and making good floor to match with existing floor complete all as directed by engineer-in-charge.

M & L for repair to leakage in roofs,terreces by breaking of existing floor/finishes and providing new PVC (SWR) bend/junction suitable for 'B' pipes,110 mm dia of outlet plain with grating including jointing with solvent cement and making good floor to match with existing floor complete all as specified and directed.

S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete.

M & L for taking down and repair to aluminium door exc.1.5 Sqm but n.exc.5 sqm each by providing joint cleat, glazing clips, rubber neoprene packing, handle 02 nos in each door, hinges anodised aluminium snap beading screw etc and refixing the same after repair Note:-Glass, or PVC partition, if any shall be measured and paid seperatly.

M & L for taking down and repaire to aluminium door not exc.1.5 Sqm each by providing joint cleat, glazing clips, rubber neoprene packing, handle 02 nos in each door, hinges anodised aluminium snap beading screw etc and refixing the same after repapir Note:-Glass, or PVC partition, if any shall be measured and paid seperatly.

Taking up or down steel tubing 15 mm bore and connections including cleaning for refixing or removing from site.

Taking up or down steel tubing 20 mm bore and connections including cleaning for refixing or removing from site.

Taking up or down steel tubing 25 mm bore and connections including cleaning for refixing or removing from site.

Refixing old steel tubing, 15 mm bore, and connections with new or old position (Walls, ceiling, floors, etc.) Note :- Steel tubes obtained from item No. 69 above shall be used under this item.

Refixing old steel tubing, 20 mm bore, and connections with new or old position (Walls, ceiling, floors, etc.) Note :- Steel tubes obtained from item No. 70 above shall be used under this item.

Refixing old steel tubing, 25 mm bore, and connections with new or old position (Walls, ceiling, floors, etc.) Note :- Steel tubes obtained from item No. 71 above shall be used under this item.

Supply and laying 15mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed.

Supply and laying 20mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed.

Supply and laying 25mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed.

S&F in repairs 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms.)

Cleaning and removing all scale dirt etc. from water storage tanks by using brush and bleaching powder and from mouth of circulating pipes etc. and writing the date of cleaning and next due date for cleaning of tank using stencil, capacity of tanks exc. 250 liters and not exc. 500 liters complete all as specified and as directed.

Cleaning and removing all scale dirt etc. from water storage tanks by using brush and bleaching powder and from mouth of circulating pipes etc. and writing the date of cleaning and next due date for cleaning of tank using stencil, capacity of tanks exc. 500 liters and not exc. 1000 liters complete all as specified and as directed.

Disconnecting existing tanks and GI tubing of any description exc. 250 ltrs and n.exc. 500 ltrs capacity and removing from site complete all as specified and directed.

Disconnecting existing tanks and steel tubing of any description exc. 500 ltrs and n.exc. 1000 ltrs capacity and removing from site complete all as specified and directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic plastic ball screwed for iron pipe and fixed. (Minimum weight of ball valve - 210 gms)

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic plastic ball screwed for iron pipe and fixed. (Minimum weight of ball valve - 210 gms)

S&F in repairs health faucet ABS Body with 1 Meter Long Easy Flex tube in Chrome finish & wall hook of 15 mm bore complete all as specified and directed.

S&F in repairs 15 mm bore bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F in repairs 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete.

S&F in repairs single lever basin mixer without popup waste with 450 mm long braided hoses for mixing hot & cold water screwed down for 15 mm bore iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bore bib taps with long handle, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repairs 15 mm bore pillar tap with long handle, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs, 15 mm bore Stop Cock concealed type, reduced body with adjustable wall flange,size 20 mm including all necessary fitting and fixture complete all as specified and directed.

S&F in repairs, 15 mm bore stop valve / angle valve, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions.

S&F in repairs, 15 mm bore angular stop cock fancy type with wall flange,screwed both ends for iron pipe or for unions.

S&F in repair brass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union complete all as specified and directed.

S&F in repair overhead shower rose fancy type of 125 mm size round shape singal flow (ABS body chrome plated with gray flat plate) with rubit cleaning system including fixing to steel pipe or union.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm.

S&F in repairs PVC waste pipe of 32 mm bore of suitable length for WHB/urinal/sink complete all as specified and directed.

S&F in repairs stainless steel soap dish made of stainless steel 1.00mm thick, approximate 150x150 mm fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs grating doom 100 mm dia of PTMT (minimum weight 25 gms)

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete.

S&F in repairs 15 mm bore brass chromium plated bib cock two in one including fixing to iron pipe or union complete all as specified and directed.

S& F in repairs stainless steal tubular towel rail 20 mm dia,600 mm long between flanges.

S&F in repairs brass chromium plated health faucet of 15 mm bore 1 Meter long easy flex tube in Chrome finish & wall hook complete all as specified and directed.

M&L for repairs to leakage in existing 15 mm bore pipe line by providing elbow/union/socket/tank nipple/nipple up to 200 mm complete all as specified and directed.

M&L for repairs to leakage in existing 20 mm bore pipe line by cutting the line and providing elbow/union/socket/tank nipple/nipple up to 200 mm complete all as specified and directed.

S&F in repairs waste coupling of PTMT (half or full threaded) 32 mm bore of discharge pipe,(Minimum weight– 45 gms.)

S&F in repair sink with drainage board made of stainless steel 0.75 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410mm x 330 mm x 160 mm and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.

S&F in repairs wash basin with fixing accessories, white, flat back with full padestal, size 555x410X205 mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets.

S&F in repairs PVC valveless, syphonic action type,smart single flushing cistern wall hung cistern with 39 mm drainage L-bend Pipe with gasket & installation kit(Suitable for EWC), low level, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets.

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc, including cleaning or refixing or removal from site all as specified and directed. (measured overall as fixed along the centre line over fittings and accessories)

S&F 110 mm bore UPVC (SWR) pipes type ‘A’, single socketed, in any length with rubber ring joints fixed to walls.

S&F 75 mm bore UPVC (SWR) pipes type ‘A’, single socketed, in any length with rubber ring joints fixed to walls.

S&F PVC (SWR) door bends 110 mm dia with acess door

S&F PVC (SWR) door bends 75 mm diaa with acess door.

S & F in stack clamps out of 50 mm x 5 mm flat iron and 16mm dia round iron stays including bolts and nuts & securing ends of stays to wall or roof for 110 mm bore of pipe complete all as directed by engineer-in-charge.

S&F in repairs lid for polyethylele water storage tank exc. and including 500 litres and n. exc 1000 litres including fixing PTMT nut/binding wire complete all as directed by engineer-in-charge.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, including PVC 'P' trap, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish.

S&F in repairs, EWC vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as directed by engineer-in-charge.

S&F in repairs, EWC bowl coupled WC with PP soft close seat cover, hinges fixing accessories size 400x665x810 mm ,P trap-180 mm with cistern fitting fixed complete all as directed by engineer-in-charge.

M&L cement concrete 1:2:4 B1, 20 mm graded agreagate for staging/plateform over roof slab including formwork for PVC tank complete all as directed by engineer-in-charge.

M&L for rendering 10 mm thick cement plaster in CM 1:6 on stone masonry or concrete surfaces finished even and smooth (without using extra cement) complete all as directed by engineer-in-charge.

S & F in repair steel ventilators with top hung shutter & glazing bars hinges, steel peg stay complete all as directed by engineer-in-charge.

M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding of hold fast etc including desterb surfase of existing position complete all as directed by engineer-in-charge.

S & F 15/20/25 mm UPVC nut including rubber washer both side inside and outside of any tank sealed with M-seal, fixed & ensuring no leakage water from tank complete fixed all as complete all as directed by engineer-in-charge.

M&L providing and injecting chemical amulsion for post construtional Antitrmite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 ltr per sqm of the vertical surface of the substructure to a depth of 300 mm including excavating channel along the wall and rodding etc. complete complete all as directed by engineer-in-charge.

M&L treatment of soil under existing floors using emulsion @ one ltr per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as complete all as directed by engineer-in-charge.

M&L Antitermite treatment at the points of contact of wood work by chemical emulsion (in oil or kerosine based solution) @ 0.5 liter/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre and sealing the same , complete all as directed by engineer-in-charge.

M/S MAJISA CONSTRUCTIONS

psj build solutions and company

JAI VASUDEV ENTERPRISES

Nikhat nirman

Siddhi Vinayak and Co

Siddharth Constructions