S.R. to Electrical Work for LT & HT Panel Cleaning by Liquid Technology & Thermal Scanning at Civil Hospital Asawa, Ahmedabad.

2026-27 Item Description Qty Unit Rate Rate In Words

Servicing, overhauling, cleaning of the panel board LT by

liquid EPNF-065™ technology , after scanning the single

side of panel by thermal scanning technology. Thermal

scanning technology includes measuring temperature

before and after servicing by each & every space of the

One side of panel must be cleaned by Air Compressor

Capacity 2.5 to 3.5 HP Motor, 1 or 3 phase, 230v, Air tank

having capacity approx 50 kg with latest moisture filter,

spray gun having EPNF-065™ liquid. The work having

time constraints of 2 to 5 minutes single side of the panel.

After finishing work agency has to provide 3 photographs Rupees Four Thousand

1 10-3-3(A) or to provide 2 minutes video. Dust or any waste material 202.40 Sq.Mtr.

Eight hundred Sixteen Only

must be collected by agency in the bottom of panel board

by non woven fabrics material or any scientific materiel.

Agency has to carry out work in presence of site in charge

engineer & to complete the work as per site in charge

engineer. ( Consider Measurement MIN. Sq.Mtr. )

Scope Of Work :-a) liquid Cleaning, b) blowing by

compressor & Cleaning, c) Thermal Scanning,d)

Photograph & Videos e) Supervision by authorized

Servicing, overhauling, cleaning of the panel board HT by

technology , after scanning the single side of panel by

thermal scanning technology. Thermal scanning

technology includes measuring temperature before and

after servicing by each & every space of the panel board.

One side of panel must be cleaned by Air Compressor

Capacity 2.5 to 3.5 HP Motor, 1 or 3 phase, 230v, Air tank

having capacity approx 50 kg with latest moisture filter,

spray gun having EPNF-065™ liquid. The work having Rupees Five Thousand

2 10-3-3(B) time constraints of 2 to 5 minutes single side of the panel. 32.33 Sq.Mtr. 5645.00 Six hundred Forty Five

After finishing work agency has to provide 3 photographs Only

or to provide 2 minutes video. Dust or any waste material

must be collected by agency in the bottom of panel board

by non woven fabrics material or any scientific materiel.

Agency has to carry out work in presence of site in charge

engineer & to complete the work as per site in charge

Estimate Amount

Note –1 All work shall be carried out as per specification attached and relevant I.S. standards or as directed.

Note –2 All the columns in schedule should be filled in by ball pan or ink and the total of the entries in the last column should be stated by the

Note –3 Rates quoted include clearance of site (Prior to commencement of work and at its closure) in all respects and held good for the work

Note –4 Tenderer must be Follow make list

Note –5 To be continued on additional sheets, if found necessary.

Asst. Eng ( Elect ) Dy. Executive Engineer ( Elect ) Executive Engineer ( Elect )

Piu, Ahmedabad Piu, Ahmedabad Piu, Ahmedabad