Providibg FHTCs

Supply and delivery of 90 mm HDPE PE-100 6 Kg/Sqcm Pipes as per IS : 4984/2016 including cost and conveyance, excluding taxes etc. complete for 1.00 Rmt. cost of materials

Construction of 90 mm HDPE PE-100 6 Kg/Sqcm Pipe line of various diameter, classes for distribution and pumping mains of water supply including earth work excavation, Including laying and jointing of pipe line etc. complete item of work for 1.00 Rmt.

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. for 80mm DI valves on 90mm Dia HDPE line

Supply delivery and fixing,of DI Scover valve arrangement on pipeline including supply of valve with dismantling joint,DI specials to suite pressure class of main line etc including RCC valve chamber as per requirement with RCC slab cover and RCC manhole cover etc complete as directed by the departmental engineers,site requierments etc .The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of work, but excluding GST and seigniorage chargesbut including overheads and contractor's profit @ 13.615% .(PartB - Volume I). (80 mm on 60 to 125mm dia mm dia HDPE pipe) 80 mm DI Valves DN 80 Scour Valve on DN 60 to 125 Pipe Line 0.90 mts Dia 1.30 mts hight

Provision for Horizontal drilling for road crossing by manual/machinery including labour, machinery and incidental charges etc complete item of work. For Pipelinee

Cost,Supply and fixing of Name Board of size 1.80Mbx1.20Mt with M.S.Squarepipe of 40mmx4Ommx3.2mm for verticals 2No-3.9mt each, Horizontals 2 Nos-1.8mt each and back support with M.S square pipe of 25mmx25mmx2.6mm verticals-2Nos-1.20mm each for 18mm guage GI sheet board of size 1.8mbx1.20mt and painting with enamel paint as per instructions of Engineer incharge and fixing in the ground in concrete including cost,conveyance of all materials, fabrication charges,painting and labour charges etc complete for JJM Name Board of Size 6'x4'

Cost and supply of 175 mm dia PVC blue casing pipe per RN3

Slotting charges for 175mm dia PVC blue casing pipe

Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 350/450 mm hole (for insertion of 175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burled channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebuIlled pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, damps etc.,The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per 1SI specification used for rotary tube well. The pebbled gravel packing should be carried out .

Supply & Fixing of 180 mm dia PVC Bore Cap per 1No

Provision for cost & supply of 175 mm dia MS clamp set

Manufacture, Supply, & Delivery of HDPE pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 75 mm dia. in coil & above 90 mm dia. straight Length)

Supply and Transportation of ……….,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes: As per list of recommended brands as category II. 5.00HP, 12-16 Stage

Fabrication ,transportation and and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using LAURITZ KNUDSEN (FORMERLY L&T) / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Makes: As per list of recommended brands . Upto 7.5 HP with DOL Starter of.

Labor charges for fixing of motors

Supply of ……...ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Makes: As per list of recommended brands as category I 3 core, 2.5 Sq mm (MAT-02773)

(Rupees Seven Lakhs sixty six thousand seven hundred eighty and paise Eighty Only)