Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹41.0 L
EMD Value
₹42,000
Closing Date
16 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, District R and B Division, Vadodara
Additional and Alteration to A, B1, C type Quarters (Paver blocks, Plumbing, Drainage, Gardening & Misc. Civil Works) at Savli Ta. Savli Dist. Vadodara
363202
12 of 2026-2027
Open
Civil - All
Works
Vadodara
9 documents required · 9 mandatory
₹1,500
Executive Engineer, District (R and B) Division, Vadodara
₹42,000
5 Nov 2026
5 Nov 2026
5 Nov 2026
16 Nov 2026
5 Nov 2026
120 days
No. Figure Amount
1 Supplying and filling Window seal joint including cleaning existing joint and 106.80 Sq.m. 251.10
Hardware material hilti screw and rubber silicon sealer and alluminium strip of
size 50 x 3 mm and all labour as per directed by engineer incharge.
2 Providing & fixing Black / Green granite frame for window/door of 16 mm to 18 113.40 Sq.m. 2333.10
mm thickness with outside & inside half round moulding and polishing both
side of stone, fixing with cement mortar and filling joints with necessary
materials like araldite, with necessary fixtures and fastening etc. complete or
as directed by engineer in charge.
3 Repairing and Refixing existing wooden or any type of door shutters & 80.64 Sq.m. 2878.50
providing & fixing necessary all fixtures and fastening cutting edges for smooth
opening, damaged part of Wooden member like bottom rail, style etc. and
closing including fixing the shutter on stone / wooden / MS frame with labour
including cutting bottom edge of door to match with flooring with necessary
repairing to frames including oil painting two coats etc. complete using
Country wood as per directed by engineer incharge.
4 Providing, Supplying, Installing, Testing and Commissioning of Pressure 3.00 Each 18180.00
Booster Pump Set consisting of suitable capacity centrifugal / monoblock
pressure pump (minimum 1.0 HP to 2.0 HP as specified), complete with
pressure tank, pressure switch, pressure gauge, non-return valve, isolation
valves, suction and delivery connections, anti-vibration pads, necessary
foundation bolts, electrical wiring from nearest point, control panel, earthing,
fittings and accessories, including fixing on existing RCC platform, alignment,
trial run, testing and commissioning to maintain constant water pressure in the
water supply system, complete in all respects as directed by Engineer-in-
5 Cleaning and disinfecting of existing RCC / Plastic overhead or underground 8.00 Each 5555.00
water storage tank of capacity up to 10,000 litres by removing sludge, dirt,
algae and other deposits, scrubbing internal surfaces, washing with clean
water, chlorination / disinfection treatment, disposal of waste material including
all labour, tools, equipment, dewatering arrangements, safety measures and
testing complete as directed by the Engineer-in-charge.
6 Providing and carrying out dismantling, alteration, re-leveling and refixing of 923.00 Sq.m. 1143.17
existing interlocking concrete paver blocks on prepared cement concrete
(PCC) base, including careful removal of existing paver blocks, stacking
serviceable blocks, excavation / dressing of uneven portions, repairing and
making good the PCC base wherever required, supplying and replacing
damaged or broken paver blocks with new paver blocks of matching size,
shape, thickness, colour and grade, laying paver blocks to proper line, level
and slope over a layer of coarse sand, filling joints with fine sand, compacting
with plate compactor/vibratory compactor, watering and finishing complete,
including disposal of unserviceable materials and all labour, tools, tackles,
transportation and incidental charges as directed by the Engineer-in-charge.
7 Removing dry oil bound distemper by a washing and scraping and sand 2664.90 Sq.m. 11.26
papering the wall surface smooth including necessary repair to scratches
8 Removing and scraping of old deteriorated plaster of any thickness from wall / 145.54 Sq.m. 19.41
R.C.C member including stacking of serviceable material and disposal of
unserviceable from site of work with all lead and lift.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
9 Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brick 4.00 Each 3427.65
bats with dry masonry work at top for 45cm. height including covering the top
with stone including providing vatas in C.M. 1:3 with finishing curing etc.
complete as directed.
10 Providing and laying 24" x 24" vitrified 8 mm thick tiles flooring over 20mm 225.00 Sq.m. 1451.16
(average) base of cement mortar 1:6 (1 cement : 6 coarse sand) on new
surface or fixing on existing flooring by adhesive material including
dismentaling of existing flooring and jointed with color cement slurry including
finished with flush pointing & cleaning the surface etc. complete for light shade.
11 Providing cement vata (10cm x 10cm size) quarter round in cement mortar 1:1 402.00 Rmt. 24.28
including neat cement finishing watering etc. complete.
12 Water proofing materials silicon base Water repellent compound. 1065.96 Litre 209.71
13 Finishing wall with weather proof exterior emulsion paint on wall surface (two 2664.90 Sq.m. 117.40
coats) to give an required shape even shade after thoroughly brushing surface
to remove all dirt, dust and remains of loose powdered materials etc. complete.
14 Providing, laying and jointing in true line and level I.S.I. mark 50mm dia. 45.00 Rmt. 195.67
U.P.V.C pipe (Sch-40) for cold water including fitting as approved by Engineer
in charge. Pipe shall be fixed on the wall with held of clamp at every two meter
c/c or shall be concealed as directed including necessary fitting etc. including
testing of pipe and joints and fixing the same with adhesive solvent including
cost of all materials.
15 Providing, laying and jointing in true line and level I.S.I. mark 110mm diameter 111.00 Rmt. 856.03
U.P.V.C. SWR Type B pipe confirming to IS 13592 -1992 with one end plain
and other end socketed with rubbering & fitting confirming to ISI 14735-1999 of
approved make for drainage system pipe line, pipe shall be jointed with each
other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of
the size 110mm diameter x 149mm length x 145mm high at every 2000mm
center to center or shall be concealed in wall as directed including necessary
fitting such as bends, shoes etc. including testing of pipe and joints and jointed
with adhesive solvent cement including cost of all materials.
16 Providing and fixing screw down bib taps of following size (A) Brass screw 54.00 No. 186.83
down bib tap polished bright (i) 15mm dia. as approved by Engineer in charge
for all floors.
17 Providing and fixing screw down bib taps of following size (A) Brass screw 54.00 No. 214.81
down bib tap polished bright (ii) 20mm dia. as approved by Engineer in charge
for all floors.
18 Providing and fixing pillar tap, capstan head screw down high pressure with 36.00 No. 354.69
screw, shanks and back nuts (B) 20mm dia. as directed by Engineer in charge.
19 Providing, laying and jointing in true line and level I.S.I. mark 160mm diameter 84.00 Rmt. 834.38
U.P.V.C. (Type B) confirming to IS 13592 -1992 with one end plain and other
end socketed with rubbering & fitting confirming to ISI 14735-1999 of approved
make for drainage system pipe line, pipe shall be jointed with each other with
rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size
160mm diameter x 210mm length x 196mm high at every 2000mm center to
center or shall be concealed in wall as directed including necessary fitting such
as bends, shoes etc. including testing of pipe and joints and jointed with
adhesive solvent cement including cost of all materials.
20 Providing and fixing PVC SWR Nahni Trap IS 14735 for drain with jail of the 20.00 No. 572.32
following nominal diameter of self cleansing design with C.I. screwed down of
hinged grating including the cost of cutting and making good the walls. (i)
100mm dia.
21 Providing, laying, testing and commissioning underground sprinkler irrigation 162.00 No. 505.00
pipe network system for garden using HDPE pipe including all fittings, valves,
pop-up sprinklers, excavation, backfilling and testing complete as directed by
the Engineer-in-charge.
22 Providing erecting and fixing double coated I.S.I. mark water tank of required 6000.00 Litre 3.95
capacity each with all necessary fittings & connection etc. complete on terrace
as directed.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
23 Excavation for foundation upto 1.50 mt depth including sorting out and 145.95 Cum 268.28
stacking of useful materials and disposing the excavated stuff for all lead and
lift for all sorts of soil.
24 Filling available excavated earth (excluding rock) in trenches plinth side of 183.75 Cum 133.65
foundation etc. in layer not exceeding 20 cm in depth consolidation each
deposited layer by ramming and watering etc. complete.
25 Spreading of Sludge Farm Yard Manure or/and good earth (Spreading of 147.00 Cum 33.48
sludge farm yard manure or/ and good earth in required thickness (cost of
sludge, farm- yard manure or/and good earth to be paid for separately)
26 Providing and fixing precast concrete kerb stone of gray cement based 130.90 Rmt. 370.68
concrete block 30cm length, 30cm height and 15cm thick of M-250 grade
concrete as per approved design and including excavation for fixing in proper
line and level, filling the joint with C:M 1:3 (1 cement : 3 fine sand) etc.
27 Grassing with 'Doobs' Grass (Grassing with 'Doobs' grass including watering 735.00 Sq.m. 35.35
and maintenance of the lawn for 30 days or more till the grass forms a thick
lawn free from weeds and fit for moving including supplying good earth if
needed) (ii) In rows 7.5 cm apart in either direction.
28 Maintenance of Lawns with Fine Grassing for the First Year. 735.00 Sq.m. 285.58
29 Providing, supplying and erecting children's outdoor multi-play station 1.00 Each 202000.00
comprising FRP slides, climbing ladder, activity panels, platform, safety
handrails and connecting members made of powder-coated galvanized steel
structure, complete with RCC foundation blocks, nuts, bolts, clamps and all
accessories, conforming to relevant safety standards, including excavation,
concreting, installation, testing and commissioning complete as directed by the
Engineer-in-charge.
30 Providing, supplying and fixing outdoor double-seater swing with heavy-duty 2.00 Each 31815.00
galvanized steel frame, powder-coated finish, anti-rust treatment, high-strength
chains, moulded rubber/plastic seats, complete with RCC foundation,
anchoring arrangements and all necessary fittings, including erection and
testing complete as directed by the Engineer-in-charge.
31 Providing, supplying and fixing single seat spring rider manufactured from 1.00 Each 15150.00
HDPE / FRP body mounted on heavy-duty powder coated spring assembly,
including RCC foundation, anchor bolts and all accessories complete.
32 Providing, supplying and fixing Garden Bench of approved design having 3.00 Each 22220.00
overall size approximately 1800 mm long x 600 mm wide x 850 mm high,
fabricated from MS square / rectangular hollow sections of suitable size and
thickness for frame, seat and backrest consisting of MS flats / perforated
sheets / MS slats as approved, all welded and ground smooth, treated with
rust remover, one coat metal primer and finished with minimum two coats of
outdoor grade polyester powder coating of approved shade and thickness not
less than 60 microns, complete with all nuts, bolts, anchor fasteners, RCC
foundation blocks where required, erection in position, transportation, labour,
tools and tackles and all incidental charges complete as directed by the
Engineer-in-charge.
33 Providing and fixing M.S. grills / Addition and alteration to existing grill of 2494.80 Kg. 164.63
required pattern to wooden / Marble / Granite / Stone frames of windows etc.
with M.S. flats at required spacings and frame alround, square or round bars
with round headed bolts and nuts or by screws (A) Ornamental grill.
34 Providing and fixing Barbed wire for fencing of galvanized steel wire of 64.00 Rmt. 1051.51
predetermine design including all material like angel post fixing in wall etc
TOTAL Rs.
i.e. Rs. Fourty One lacs Six hundred Seventy Seven and Thirty paisa only.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written
in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
Net Rs. ___________________________ Total Rs. ________________________
In words ____________________ In words ____________________
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-
Charge for which no extra payment shall be made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills.
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-
10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there
is a change as per actual mix design the cost of difference of cement consumption have been deducted from the
rate of original item at the rate of input rate mentioned in all the tender.
5. The Contractor will have to submit the all required mix design at his own cost before execution as
directed and to be approved from the Engineer in charge.
Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and
found order.
Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer
Dist. (R & B) Sub Division No. 2, Dist. (R & B) Division, Dist. (R & B) Division,
Vadodara Vadodara Vadodara
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ.pdf
GRs - Buildings.pdf
NIT.pdf
SBD - Tender Form.pdf
Specification Index.pdf
Technical Specifications.pdf
Test Sch.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .