Construction of M.B.A. Block in Govt. Degree College Dharamshala, Distt. Kangra H.P. (Deposit work)

Providing and fixing factory made panel 30mm (thirty milimetre)thick pre laminated of Rajshri Prominance / Supreme PVC door shutter consisting of frame made out of M.S. tubes of 19 (ninteen)gauge thickness and size of 19 mm x 19 mm (ninteen into nineteen milimetre)for styles and 15x15 mm (fifteen in to fifteen milimetre)for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm (thirty milimetre)thickness, 70 mm (seventy milimetre)width out of which 50 mm (fifty milimetre)shall be flat and 20 mm (twenty milimetre)shall be tapered in 45 (forty five milimetre)degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm (twenty milimetre)shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (ten milimetre) (5 mm x 2 ) thick, 20 mm (twenty milimetre)wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm (fifteen milimetre)wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm (five milimetre) thick PVC strip of 20 mm (twenty milimetre)width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing carriage of material within all leads, lifts and other incidental Charges.The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 40 mm (forty milimetre)thick second class deodar wooden penelled shutter having infill panels of 12mm (Twelve millimetre) thick Phenol Bonded (Both Sides) Prelaminated BWP Grade Partical Board in Matt Finish ISI marked is No. 12823 of action Tesa/ Greenlam/ Merinolam/Kitlam/Vista as per ISI and approved shade as per PWD specification, drawing and design. and entire satisfaction of Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 35 mm (thirty five milimetres) thick ISI marked flush door shutters both side commercial phenol bonded of CENTURY/ALPRO/DURO PLY / GREEN PLY No.1S-2202 to be finished with mica lamination of approved shade conforming to ISI marked flush door shutters : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless Steel butt hinges with necessary screws.as per PWD specification, drawing and design. and entire satisfaction of Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive toll tax, GST and any other taxes imposed by the Government.

Providing and fixing float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)(twelve point five zero kilograme per square metre) of Modi Guard / Saint Gobain glazing in door, window, ventilator shutters and partitions etcetra with EPDM rubber / neoprene gasket etcetra complete as per the architectural drawings and the directions of engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The Rate inclusive toll tax, GST and any other taxes imposed by the Government.

Providing and fixig glazing with glass panes of 4mm (four milimertres) thickness of modi guard / Sant gobain (weight not less than 10.00 kg/sqm (ten decimal zero kilograme per square metres) glazing in aluminium door, windows, ventilators\ shutter and partition etcetra; with PVC/Neoprens gasket etcetra; complete including carriage of material within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing 40x5mm (forty into five millimeter) flat iron hold fast 40cm (forty centimeter) long including fixing to frame with 10mm (ten millimeter) diameter bolts and nuts and wooden plugs and embeding in cement concrete block 30x10x15cm (thirty into ten into fifteen centimeter) 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm (twenty millimeter) nominal size complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax,GST and any taxes imposed by the Government.

Providing and fixing the complete box of Cup board shall be made of 25mm (Twenty Five millimetre) thick water proof termite resistant plyof Uniply / Green ply/ Century ply / Kitply / Dura ply / Marino ISI marked including shelves.Back side of board shall have 6 to 8 mm (Six to eight millimetre) thick water proof ply all the cut portion of board shall have 6 mm (Six millimetre) thick hard wood edging. The shutter from all side shall be finished with 1mm (one milimetre)thick lamination ISI Marked of approved shade of Century / Greenlam /Action Tesa and 19 mm (Nineteen millimetre) thick water proof ply board of uniply / Greenply for shelves including hinges, handle,knob megnatic catcher complete the outer face of cupboard shall be measured and paid for as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Chargeincluding carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax,GST and any taxes imposed by the Government.

Providing and fixing factory made PVC door frame single rebate of any clours of size 50x47mm (fifty into forty seven milimetres) with a wall thickness of 5mm (five milimetres)made out of extruded 5mm (five milimetres) rigid PVC foam sheet heat bend & mitred at corners and jointed with 2 Nos. of 150mm (one hundred fifty milimetres)long brackets of 15mmx15mm (fifteen in to fifteen milimetres) M.S. square tube, the vertical door profiles to be reinforced with 19mmx19mm (nineteen in to nineteen milimetres)M.S. square tube of 19 (nineteen) gauge EPDM rubber gasket weather seal to be provided throughout the frame i/c fixing of door frame to wall with M.S. screws 100 (hundred milimetres)long with wooden or rawl plugs emedded in masonry complete as per approved shade within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government..

Providing and fixing 65x35mm (Sixty five into Thirty five millimetres) special quality bright finished brass cup-board locks or ward robe locks with six levers including necessary screws etcetra complete as per approved shade within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government..

Providing and fixing 300x16mm (three hundred into sixteen millimeters) ISI marked oxidised M.S. door aluminioum sliding door bolt I.S.I. marked anodi zed(anodic coating not less than grade AC-10as per IS 1868) transport or dyed to required colour or shade with nuts and screws latches conforming to IS:5930 with screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST and any taxes imposed by the Government.

Providing and fixing 200X10mm (two hundred into ten millimeters) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST and any taxes imposed by the Government.

Providing and fixing 150X10mm (one hundred fifty into ten millimeters) ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST and any taxes imposed by the Government.

Providing and fixing 125mm (one hundred twenty five millimeters)fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium die cast extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body with double speed adjustment with necessary accessories and screws etcetra complete complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government..

Providing and fixing 19 mm (nineteen milimetrea) thick polished Grey / chima pink Granite having semi round nosing gang saw cut, mirror polished, premoulded and prepolished, machine cut for work top of labs of required size of approved shade, colour and texture laid over 20 mm(twenty milimeres) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetra complete as per specification, drawing, design and direction by the Engineer in charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing staircase railing having hand rail of 50 mm (fifty milimeteres)dia SST stainless steel pipe handrail fixed with 35mm (thirty five milimetres) diametre stain less steel pipe as per detail in combination of 35XZ35mm (thirty into thirty five milimetres) stain less steel square pipe and 15/20 stain less steel and baluster stair case complete in all respect as per specification, drawing, design and direction by the Engineer in charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing handrail 50mm (fifty milimetres)dia Stainless steel (SST) hollow pipe handrail slip resistant with round ends at two level at 75cm and 90cm height welded to 25mm diametre stain less steel hollow pipe balusters. It should extend 30cm beyond the top and bottom of the ramp as per detail of approved drawing , design specificationand direction by the Engineer in charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Painting Steel work with Deluxe multi surface paint of Asian/Nerolac Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting wood work with premium enamel of Asian/Nerolac Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 1200x1800 mm (Twelve hundred into eighteen hundred millimetre) Green chalk board/Black board of Landmark / Promark shall be made of steel of thikness 0.3 to 0.4 mm. (zero decimal three to zero decimal four millimetre) It shall have vitreous Enmal coating of 0.095 mm (zero decimal zero nine five millimetre) minimum thickness on top and 0.3 mm (zero decimal three) on the back. top shall be free from waviness and shall show excellient ability. The core material shall be 9mm (Nine millimetre) thick MDF board heaving bulk density of 750kg/cum (Seven hundred

fifty kilogram per cubic metre) and grade-1 as per IS : 212406-203 edition 2.2 the backing material sheet shall be min. 0.25mm (zero decimal two five millimetre) thick electro galvanised steel sheet conforming to is: 277-2003. The board shall be fixed on the wall with specially designed J clamps and Square clamps with help of Nylon sleves and screws as per site requirement complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge. including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and applying white cement (Birla white/JK) /based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing water proofing treatment shall be done in two coats apply First coat of Dr. Fixit Torch SHIELD ( P - 3160- 3mm ) to the clean and saturated surface maintaining a coverage 0.60 sqm (Zero decimal six zero squate meter) per kilogram to achieve 1mm (one millimeter) thickness this coating shall also be executed up to 300mm vertically. The 2nd coat shall be applied in opposite direction after 4 to 6 (Four to six) hours of application of 1st coat then sprinkle sand on top surface of applied Dr. Fixit Fast flex white still tacky and the second coat. Then apply cement mortar 1:4 (one cement ist four sand) and mixed with Pidiproof LW at the rate 200ml (two hundred millimetre) per 50 (Fifty kilogram) of cement over the floor with suitable gradient towords drain water pipe while the second coat of Dr. Fixit is still tacky.complete as per approved drawing, design including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate is including Royality, Malkana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.

Finishing walls with Apex weather proof exterior emulsion paint of Asian / Dulux / Berger / Nerolac Suraksha paints of approved shade having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete as per Architectural drawing ,design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats with Premium Enamel paint of Asian / Dulux / Berger / Nerolac Suraksha paints based water thinnable sealer of approved brand and manufacture for interior shade on undecrated concrete/ stone/ plaster of wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats with acrylic washable Distemper of Asian / Dulux / Berger / Nerolac Suraksha paints based water thinnable sealer of approved brand and manufacture for interior shade on undecrated concrete/ stone/ plaster of wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying two or more coats of Interior emulsion of Asian paints / Berger paints/ Dulux paints/Nerolac paints (above Dado/skirting) of approved shade for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic,/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete as per Architectural drawing ,design and specifications of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing acoustical panels of 600x1200x16 mm( six hundred into twelve hundred intosixteen millimeters) Duro RH 19 Tile of Armstrong and fixed with the power coated G.I.frame work @ 600mm centre to centre in combination with 150X12mm (one hundred fifty into twelve millimetres) thick Rai woodbarder as per pattern and detail fixed with steel screw as per detail drawing and specification as per direction of Engineer-In -Charge .The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 595 X 595 X6 mm (five hundred ninty five into five hundred ninty five into six millimetre) designer board of Everest (E-board) ceiling with pre-panled G.I. Channel framing @ 600mm (six hundred millimetres) centre to centre including of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 12mm (twelve millimetre) thick Unistone / NTC / Atlantic tile cladding on wall surface with 12mm ( twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry to match the stone including scaffolding and cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- In-Charge . The rate is inclusive of toll tax, GST and any other taxes imposed by the Government.

Constructing brick masonry chamber for underground C.I. cast iron inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cast iron cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten milimetres) internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design Inside dimensions 455x610 mm and 45 cm deep for single pipe line : 19.30.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 as per direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Govern