Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.0 LAccepted-AOC D NO 58 20 33 FLAT NO F 2 VAIKUNTAPARVATHI RESIDENCY APSEB COLONY BUTCHIRAJUPALEM VISAKHAPATNAM 530 027 | VISAKHAPATANAM | ANDHRA PRADESH | 530027 | L1 | Accepted-AOC Being Lowest Vendor | |
| 2 | L2₹27.4 L+₹43,133.20 (1.60%)Rejected-Finance | L2 | Rejected-Finance Being not L1 | |
| 3 | L3₹27.8 L+₹80,244 (2.97%)Rejected-Finance ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | NTR | ANDHRA PRADESH | 520001 | L3 | Rejected-Finance Being not L1 | |
| 4 | L4₹28.0 L+₹1.0 L (3.89%)Rejected-Finance | L4 | Rejected-Finance Being not L1 | |
| 5 | L5₹28.2 L+₹1.2 L (4.49%)Rejected-Finance | L5 | Rejected-Finance Being not L1 |
| Sl No | Description | Qty | Unit | RAJASYAMALA INFRA PROJECTS L2 | SATYAMEGHA ENGINEERS L4 | PRATIMA ENGINEERING WORKS L5 | venkata sai constructions L1 | sai ganesh enterprises L3 | SRI SIMHADRI COMPANY L6 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Removing worn out bollard foundation bolts of 63 mm dia on the berth end by following activities all as specified and directed :-
(a) Providing temporary arrangements using 12 mm thick MS plate and angle iron stiffeners of suitable size for holding down core drilling machine system in required position.
(b) Drilling hole in RCC (by using core drilling machine with diamond core bit) of 77 mm dia to a depth of 500 mm at an angle of 23 degrees cut over the existing bolt to a depth of 430 mm. The projectile of the existing inclined bolt shall be marked on the bolt foundation and lateral core cutting in the RCC foundation to facilitate the core bit to cut through the existing bolt at height of 430 mm and there by removing the bolt from the foundation. | 54 | Each Job | 9,000 ₹4,86,000 | 9,750 ₹5,26,500 | 8,550 ₹4,61,700 Lowest | 9,666 ₹5,21,964 | 12,500 ₹6,75,000 | 12,500 ₹6,75,000 |
| 2.00 | Material and labour for cleaning the core as made side item Nos. 1b & 2b herein before and removing the dust using electrically driven hot air blower and filling the entire core with polymer base mortar (micro concrete of grade M-70-non hilti material) FOSROC Renderoc-RG as per manufacturer’s instructions and cured for 72 hours complete all as specified and directed. | 54 | Each Job | 2,400 ₹1,29,600 | 2,450 ₹1,32,300 | 2,700 ₹1,45,800 | 4,499 ₹2,42,946 | 650 ₹35,100 Lowest | 1,800 ₹97,200 |
| 3.00 | Material and labour for cutting core of size 42 mm dia and 360 mm deep in the filling of polymer based mortar, as filled vide item No.3 herein before in exact angle as required, the material surfaces of the core shall be roughened using special bushing bit, clean the core and removing the dust using electrically driven air blower, injecting in the core 400 ml heavy duty adhesive chemical HILT HIT-RE 500, from the bottom of hole in order to avoid air pockets complete all as specified and directed. | 54 | Each Job | 12,986.4 ₹7,01,265.6 | 12,000 ₹6,48,000 | 13,500 ₹7,29,000 | 11,246 ₹6,07,284 | 8,500 ₹4,59,000 Lowest | 12,000 ₹6,48,000 |
| 4.00 | Supply and insert HAS-E ductile steel galvanized threaded rod 39 mm dia and 510 mm long of grade 8.8 of make HILTI India Pvt. Ltd. indicating embedment depth mark with washer and nut of galvanized steel with strength class 8, washer shall be 72 mm dia 1 No. each at base and top and nut shall be of 59 mm dia all as specified and directed.
Note: - The rod shall be inserted in the adhesive chemical as filled vide item No.4 herein before, before it cures. Inclinometer shall be used to maintain the required angle. Nuts and washer shall be fixed on the rod after the rod in set for 42 hours. | 54 | Each Job | 14,486.4 ₹7,82,265.6 | 14,450 ₹7,80,300 | 15,300 ₹8,26,200 | 11,456 ₹6,18,624 Lowest | 17,500 ₹9,45,000 | 12,000 ₹6,48,000 |
| 5.00 | Material and labour for conducting vertical pull test on the new HILTI HAS-E bolt using hydraulic testing machine for recommended pulling capacity of 16.64 tonne per bolt all as directed.
Note: - (i) The test shall be carried out on the selected bolts as decided by accepting officer and the results shall be recorded in the presence of Engineer-in-Charge.
(ii) Failed bolts to be re-fitted by procedure 1 to 5 and retested, no extra payment paid against these jobs. | 14 | Each Job | 2,599 ₹36,386 | 3,000 ₹42,000 | 3,600 ₹50,400 | 5,299 ₹74,186 | 4,500 ₹63,000 | 1,800 ₹25,200 Lowest |
| 6.00 | Material and labour for cleaning and removing all scales and dire from and around the existing bollard bolt by wire brushes for cracking the nut of existing anchor bolt with pressure/ manual operated nut cracker without damaging the existing threads and cleaning the existing anchor bolt using the product of Henkel Adhesive Technologies Pvt. Ltd. – “ Loctite” – Solution with ODC free cleaner and degreaser Product code – 22355 with hot water and leave dry the anchor bolt and fixing new bollard nut of mild steel having inner dia 63 mm and outer dia not less than 72 mm and weight not less than 760 grams with 3 mm thick washers minimum 02 Nos. of outer dia 88 mm along with lock set chemical of “Loctite” solvent base medium strength thread locker Loctite243 in the gap between nut and anchor bolt complete
Make of Anti rust cleaner & Thread locker :- LOCTITE | 14 | Each Job | 648 ₹9,072 | 590 ₹8,260 | 900 ₹12,600 | 1,956 ₹27,384 | 1,000 ₹14,000 | 580 ₹8,120 Lowest |
| 7.00 | Material and labour for complete removal of existing finishes of the bollard base and head and applying two coat of coal tar epoxy paint over two coats of epilux zinc chromate yellow primer on coropex epoxy shop primer, brown in steel surfaces complete all as specified and directed. | 28 | SqM | 300 ₹8,400 | 315 ₹8,820 | 360 ₹10,080 | 456 ₹12,768 | 180 ₹5,040 | 120 ₹3,360 Lowest |
| 8.00 | M&L for buffing of stainless steel railing included all necessary polishing materaial and necessary material to achive the proper polishing of railing in any shape and size height of railing not exceeding 2.00 mtr all as specified and directed. | 40 | RM | 291 ₹11,640 | 220 ₹8,800 | 450 ₹18,000 | 436 ₹17,440 | 140 ₹5,600 Lowest | 450 ₹18,000 |
| 9.00 | Material & Labour for providing and fixing stainless steel (Grade 304) of railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specfied and directed. | 1,100 | Kg | 550 ₹6,05,000 | 615 ₹6,76,500 | 540 ₹5,94,000 Lowest | 549 ₹6,03,900 | 550 ₹6,05,000 | 680 ₹7,48,000 |
Tender Value
₹49.5 L
EMD Value
₹98,980
Closing Date
3 Mar 2026, 6:00 pmClosed
GE (I) DM Visakhapatnam
GE (I) DM Visakhapatnam
REPAIRS AND REPLACEMENT OF RIGGING ARRANGEMENT AT N-4 TO N-26 AT NAVAL DOCKYARD VISAKHAPATNAM UNDER GE (I) DM VISAKHAPATNAM
2026_MES_751952_1
8484/E8
Open Tender
Civil Works
Item Rate
180 days
Naval Dockyard Visakhapatnam
As per tender document
8 documents required · 8 mandatory
₹500
GE (I) DM Visakhapatnam
₹98,980
Yes
3 Jun 2026
10 Feb 2026
5 Mar 2026
10 Feb 2026
3 Mar 2026
24 Feb 2026
11 Feb 2026 - 21 Feb 2026
Removing worn out bollard foundation bolts of 63 mm dia on the berth end by following activities all as specified and directed :- (a) Providing temporary arrangements using 12 mm thick MS plate and angle iron stiffeners of suitable size for holding down core drilling machine system in required position. (b) Drilling hole in RCC (by using core drilling machine with diamond core bit) of 77 mm dia to a depth of 500 mm at an angle of 23 degrees cut over the existing bolt to a depth of 430 mm. The projectile of the existing inclined bolt shall be marked on the bolt foundation and lateral core cutting in the RCC foundation to facilitate the core bit to cut through the existing bolt at height of 430 mm and there by removing the bolt from the foundation.
Material and labour for cleaning the core as made side item Nos. 1b & 2b herein before and removing the dust using electrically driven hot air blower and filling the entire core with polymer base mortar (micro concrete of grade M-70-non hilti material) FOSROC Renderoc-RG as per manufacturer’s instructions and cured for 72 hours complete all as specified and directed.
Material and labour for cutting core of size 42 mm dia and 360 mm deep in the filling of polymer based mortar, as filled vide item No.3 herein before in exact angle as required, the material surfaces of the core shall be roughened using special bushing bit, clean the core and removing the dust using electrically driven air blower, injecting in the core 400 ml heavy duty adhesive chemical HILT HIT-RE 500, from the bottom of hole in order to avoid air pockets complete all as specified and directed.
Supply and insert HAS-E ductile steel galvanized threaded rod 39 mm dia and 510 mm long of grade 8.8 of make HILTI India Pvt. Ltd. indicating embedment depth mark with washer and nut of galvanized steel with strength class 8, washer shall be 72 mm dia 1 No. each at base and top and nut shall be of 59 mm dia all as specified and directed. Note: - The rod shall be inserted in the adhesive chemical as filled vide item No.4 herein before, before it cures. Inclinometer shall be used to maintain the required angle. Nuts and washer shall be fixed on the rod after the rod in set for 42 hours.
Material and labour for cleaning and removing all scales and dire from and around the existing bollard bolt by wire brushes for cracking the nut of existing anchor bolt with pressure/ manual operated nut cracker without damaging the existing threads and cleaning the existing anchor bolt using the product of Henkel Adhesive Technologies Pvt. Ltd. – “ Loctite” – Solution with ODC free cleaner and degreaser Product code – 22355 with hot water and leave dry the anchor bolt and fixing new bollard nut of mild steel having inner dia 63 mm and outer dia not less than 72 mm and weight not less than 760 grams with 3 mm thick washers minimum 02 Nos. of outer dia 88 mm along with lock set chemical of “Loctite” solvent base medium strength thread locker Loctite243 in the gap between nut and anchor bolt complete Make of Anti rust cleaner & Thread locker :- LOCTITE
Material and labour for complete removal of existing finishes of the bollard base and head and applying two coat of coal tar epoxy paint over two coats of epilux zinc chromate yellow primer on coropex epoxy shop primer, brown in steel surfaces complete all as specified and directed.
M&L for buffing of stainless steel railing included all necessary polishing materaial and necessary material to achive the proper polishing of railing in any shape and size height of railing not exceeding 2.00 mtr all as specified and directed.
Material & Labour for providing and fixing stainless steel (Grade 304) of railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specfied and directed.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.32 MB
BOQ_842201.xls
BOQ • 0.32 MB
8484Tender.pdf
Tender Documents • 1.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .