Renovation of Supvrs mess by Providing/fixing/applying of various stores/items/material in OTM accommodation at HQ DGBR Complex (Seema Sadak Bhawan), Ring Road, Delhi Cantt, New Delhi (retender)

Amount

Demolition of brick work built in cement or cement lime mortar of any description including quoins, arches, pillars,etc., all specified and directed by Engineer-in-Charge.

M & L for brick work with Cement Mortar 1:6 using sub class 'B' bricks old size, straight or curved on plan exceeding 6 m mean radius all specified and directed by Engineer-in-Charge.

Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etc. complete all specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick in CM 1:4 on fair faces or other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement with using water proofing compound complete all specified and directed by Engineer-in-Charge.

M&L for rendering 10 mm thick in CM 1:6 on fair faces or other than fair faces of brick work or concrete surfaces of walls finished even and smooth without using extra cement complete all specified and directed by Engineer-in-Charge.

M & L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling, chajja and like surface finished even & smooth without using extra cement incl water based rust remover solution with scaffolding etc, complete all specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of putty complete all specified and directed by Engineer-in-Charge.

M & L for applying two coats of oil bond destember over one coat of Birla white wall care putty on newly plastered surfaces (internal) of walls complete all specified and directed by Engineer-in-Charge.

M&L preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all specified and directed by Engineer-in-Charge.

M&L for old decorated surfaces plastered or unplastered surface of wall and applying two coat of oil bond distemper over one coat of wall care putty on wall complete all specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated plastered surfaces of walls, brooming down,washing with water etc and applying two coat of cement based paint over one coat of putty complete all specified and directed by Engineer-in-Charge.

Dismantling of wall and ceiling board fibre pulp AC boards etc any thickness including cover fillets removing the wiring and refixing the same including fixture as necessary at site including frame work complete all specified and directed by Engineer-in-Charge.

M & L for snap grid ceiling with E- board of size 600 mm x 600 mm x 4 mm thick including aluminium alloy anodised at edges angle 25 x 25 x 1.5 mm and tee section 38 x 38 x 1.5 mm at other than edges both ways fixed with 4 mm dia GI wire complete all specified and directed by Engineer-in-Charge.

Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame) complete all specified and directed by Engineer-in-Charge.

M&L aluminium alloy powder coated windows including aluminium coated frames sliding track, bottom weighing not less than 1.015 kg/Rm ,sides and top not less than 0.826 kg/Rm double revated and 0.55 kg for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series-A (15mm) 3 track of Jindal section number for sliding windows with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clips joint cleats rubber gaskets etc including provision of 5.5 mm thick tinted glass/frosted glass of superior quality and stainless steel jail including all standard fittings complete all specified and directed by Engineer-in-Charge.

M&L for aluminium alloy powder coated door including frame and channel of section (Door frame single grove 101.6 mm x 44.45 mm x 2.1, shutter top section 47.62 mm x 44.45 x 1.95 mm thick shutter bottom vertical section 85 mm x 44045 mm x 1.80 mm thick ,shutter middle section 83.50 mm x 44.45 mm x 1.80mm thick shutter glazing clips weighing not less than 0.097 kg/Rm incl as directed and approved by OC Contract and as per IS specification including provn of 5.5 mm thick tinted glass/12mm thick prelaminated particle board as required incl handle, tower bolt, floor spring heavy duty "SAMRAT" ,looking arrangement "GODREJ" rubber gasket and door stopper complete all specified and directed by Engineer-in-Charge

S&F Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 55 mm x 47 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame and fixing with ancher bolts complete all specified and directed by Engineer-in-Charge.

30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames complete all specified and directed by Engineer-in-Charge.

S&F for Solid PVC wall cliding consisting of 5 mm thick wood grain printed PVC sheet incl of solvent cement and fixing at site with PVC frame as per specifications complete all specified and directed by Engineer-in-Charge.

Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame) complete all specified and directed by Engineer-in-Charge.

M&L Mild steel frame work as in door chowkhats with angle iron welded together ends of angle shouldered and fixed to opening and welding 3 Nos mild steel butt hinges 100 mm size, and 6 nos hold fasts made out of FI 25 x 3 mm 30 cm long for fixing of chowkhats complete all specified and directed by Engineer-in-Charge.

S&F 35 mm thick 2nd class hard wood glazed and skelton shutter divided into square with plain, chamfered or rounded sash bar and fitted with cut and mitred beads for securing glass, size of members as per SSR Part - I Section 8 clause 8.24 (b) complete all specified and directed by Engineer-in-Charge.

S&F 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all specified and directed by Engineer-in-Charge.

M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all specified and directed by Engineer-in-Charge.

S&F MS butt hinges medium weight 100 mm size fixed with MS screws all specified and directed by Engineer-in-Charge.

S&F aluminium anodised barrel tower bolt extruded section 150 mm long and fixed with MS screws all specified and directed by Engineer-in-Charge.

S&F 150 mm extruded aluminium alloy handle anodised fabricated type and fixed with MS screws all specified and directed by Engineer-in-Charge.

S&F 300 mm extruded section aluminium alloy anodised, sliding door bolt with hasp and staple and fixing clip of sheet and fixing bolt and nut all specified and directed by Engineer-in-Charge.

S&F in repair 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete fixed on wooden frame or on wall with wooden plugs and set in cement mortar complete all specified and directed by Engineer-in-Charge.

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all specified and directed by Engineer-in-Charge.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all specified and directed by Engineer-in-Charge.

S&F stainless steel sink with drainage board made out of 0.80 mm thick sheet for kitchen with plug, washers, waste pipe incl fixing cast iron cantilever bracket connecting union over all size 915 x 460 mm with bowl size 410 x 330 x 160 mm complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 15 mm complete all specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 20 mm complete all specified and directed by Engineer-in-Charge.

Supply and fix galvanized steel tubing, 15 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all specified and directed by Engineer-in-Charge.

Supply and fix galvanized steel tubing, 20 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all specified and directed by Engineer-in-Charge.

Cutting chases, pinning in, for brick walls built in cement mortar, making good to facings where required and pointing in cement mortar 1:3 or PCC 1:2:4 type B-O (using 12.5 mm graded aggregate) as required for concealed water tubing etc cutting exceeding 10cm girth but not exc. 20 cm complete all specified and directed by Engineer-in-Charge.

Supply and fix in repairs vitreous china wash hand basin (oven type) white of size 550 x 400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size and waste pipe & waste fittings complete all specified and directed by Engineer-in-Charge.

M & L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, WHB, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all specified and directed by Engineer-in-Charge.

S&F in repairs chromium plated brass central hole WHB mixer 15 mm bore chromium plated, fancy type including joints to hot and cold complete all specified and directed by Engineer-in-Charge.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white incl 'P' or 'S' 100 mm trap and making good the disturbed surface to match with the existing complete all specified and directed by Engineer-in-Charge.

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom end cover and mild steel chromium plated hanging device Make-Cera/Hindustan complete all specified and directed by Engineer-in-Charge.

S&F in repair vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with urinal spreader and union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all specified and directed by Engineer-in-Charge.

S & F in repairs floor mounted EWC one piece incl all necessary fittings complete all as specified and directed by Engr -in-charge. Make- Cera soft close seat cover outlet gasket/inlet gasket or equivalent to Jaquar/Kohler complete all specified and directed by Engineer-in-Charge.

Supply and fix in repairs PVC low level white flushing cistern valve less syphonic action type 10 lts capacity IS marked with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC,(ISI Marked) complete all as specified. Make-Cera/Parryware/Hindustan complete all specified and directed by Engineer-in-Charge.

S&F in repairs PVC waste pipe 32 mm dia for wash hand basin, complete all specified and directed by Engineer-in-Charge.

S & F in repairs 32 mm dia WHB waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all specified and directed by Engineer-in-Charge.

S & F in repair 15 mm dia 600 mm long PVC connections with brass check nut complete Make Polytuff/symet or equivalent complete all specified and directed by Engineer-in-Charge.

S & F in repair Glass Corner Shelf 6 mm thick including CP railing radius 250mm complete all specified and directed by Engineer-in-Charge.

S&F in repairs Glass shelf assembly 5.5 mm thick, 600 mm long 120 mm wide with CP railing complete all as specified and directed by Engineer-in-Charge.

S&F in repair Health faucet, CP brass with 1.50 m long flexible pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule Make-Jaquar/marc/Kohlar, complete all specified and directed by Engineer-in-Charge.

S&F in repairs angle valve, fancy type, chromium plated brass, 15mm, complete all specified and directed by Engineer-in-Charge. (Make:Marc/Kohlar)

Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all specified and directed by Engineer-in-Charge.

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed or bedding layer of CM 1:6 mm thick for laying floor finishes complete all specified and directed by Engineer-in-Charge.

All as per item No 58 but in vertical surface over and incl 10 mm thick backing coat in CM (1:4) complete all specified and directed by Engineer-in-Charge.

M&L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or oloured cement to match incl 15mm thick screed bed or bedding layers in cement mortar ( 1:6) complete all specified and directed by Engineer-in-Charge.

S & F Cequered cement concrete tiles PU coated with grey cement and pigment 30 cm x 30 cm x 22mm thick set jointed and pointed in neat cement slurry in floors and including 75 mm thick cement concrete type D-2 1:4:8 and including 15 mm thick screed bed in CM 1:6 complete all specified and directed by Engineer-in-Charge.

M&L for glazed ceramic colour tiles (600 x 300 x 7 mm) thick, in vertical surface etc set and jointed in neat slurry and pointed in white or coloured cement to match with tiles including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

Demolition of reinforced cement concrete in any position complete all specified and directed by Engineer-in-Charge.

M&L for Reinforced cement concrete 1:1.5:3 Type A-1 (20 mm graded agg) in roof slab, cooking platform, shelves & similar items complete all as specified and as directed by Engineer-in-Charge

M & L cement concrete M-25 desigh mix (using 20 mm graded aggregate) for foundations, including rafts, footings, foundations beams, plinth beams, bases for columns etc complete all specified and directed by Engineer-in-Charge.

M & L cement concrete M-25 design mix (using 20mm graded aggregate) for columns, pillars, piers, post and strut complete all specified and directed by Engineer-in-Charge.

M & L cement concrete M-25 design mix (using 20 mm graded aggregate) for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves and this like complete all specified and directed by Engineer-in-Charge.

M & L cement concrete M-25 design mix (using 20 mm graded aggregate) for beams, cantilevers, beressummers, lintels over 1.5m span complete all specified and directed by Engineer-in-Charge.

M & L cement concrete M-25 design mix (using 20 mm graded aggregate) for staircases (including landings) complete all specified and directed by Engineer-in-Charge.

M & L for formwork to sides of concrete, foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work for rough finished surface complete all specified and directed by Engineer-in-Charge.

M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions etc.for fair finished surface complete all specified and directed by Engineer-in-Charge.

Use and waste of form work to soffits of suspended slabs such as roof slab, Chajja, platforms and landings etc not exc 200 mm thick (horizontal or sloping) for fair finished surfaces of concrete complete all specified and directed by Engineer-in-Charge.

S&F TMT steel bars of 10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to. complete all specified and directed by Engineer-in-Charge.

- ditto- as ser item no above but 5 mm dia and over upto 10 mm dia in stirrups, spacers and binders complete all specified and directed by Engineer-in-Charge.

Material and labour for rotational moulded polyethylene water storage tanks white colour 500 Ltr. capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 25 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description (Make : Sintex/Polywell) (ISI Marked) complete all specified and directed by Engineer-in-Charge.

Material and labour for rotational moulded polyethylene water storage tanks white colour 1000 Ltr. capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 25 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description (Make : Sintex/Polywell) (ISI Marked) complete all specified and directed by Engineer-in-Charge.

S&F 20 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38 gms/20 mm- 45 gms /25 mm- 65 gms) complete all specified and directed by Engineer-in-Charge.

Demolition and breaking up rain water pipes (CI,AC,PVC etc) set in any cement mortar of any diameter incl bends complete all specified and directed by Engineer-in-Charge.

S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110 mm bore complete all specified and directed by Engineer-in-Charge.

S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 75 mm bore complete all specified and directed by Engineer-in-Charge..

S & F 100 mm bore cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all specified and directed by Engineer-in-Charge.

S&F in repair PVC (SWR) bends & tee any radius, 110 mm bore complete all specified and directed by Engineer-in-Charge.

S&F in repair PVC (SWR) bends & tee any radius, 75 mm bore complete all specified and directed by Engineer-in-Charge..

S&F in repair 100 mm bore cast iron bends, traps & tee complete all specified and directed by Engineer-in-Charge.

S&F in repair 75 mm bore cast iron bends, traps & tee complete all specified and directed by Engineer-in-Charge.

S&F in repair aluminium extruded section Door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all specified and directed by Engineer-in-Charge.

Excavation in trenches, n exc 1.5m wide and n exc 1.50 m in depth for foundation etc and getting out in soft/loose soil complete all specified and directed by Engineer-in-Charge.

Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all specified and directed by Engineer-in-Charge.

Removal of surplus soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above starting point complete all specified and directed by Engineer-in-Charge.

M&L for Cement concrete 1:4:8 type D-2 using 40 mm graded stone agg as in foundations, filling and mass concrete complete all specified and directed by Engineer-in-Charge.

M&L PCC (1:2:4) type C-1 using 12.5 mm graded stone aggregate as in coping including necessary form work, including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all specified and directed by Engineer-in-Charge.

S&F stainless steel railing 900 mm high form finished top of stairs/ roof using modular balustrade system with 50 mm dia hand rail and kid rail consisting of 02 Nos 19 mm dia rods made of stainless steel of grade SS-304 with 12 mm thick toughened glass along with all accessories complete all as per manufacturer instruction and as directed Make-Bakyster Cat NO-OZBF_SS-44 DGH and hand rails Cat NO-OZBF-SS-ACC-HR-SS-P-50 and mid rail or Cat part NO_OZBF-SS-ACC-MR-19 of Ozone or equivalent of fabronixd/Godrej glass saint Gobind/Modi Note_ stainless steel railing shall be installed by approved by representative of manufacture complete all specified and directed by Engineer-in-Charge.

S&F 12 mm thick toughened glass door in single/double leaf incl stainless steel handles incl all stainless steel arrangements as floor spring of make ozone, stainless steel fixing arrangement incl any colour froasted glass film and any size of logo if required fixed to ground/existing floor surface in cement concrete 1:2:4 B-1 type incl locking arrangement with 2 sets of duplicate keys incl all required accessories complete all specified and directed by Engineer-in-Charge.

M&L for unitized structural glazing system with 12 mm thick toughed glass using long steel handles, stainless steel spandred, with area of glass exc 6 sqm n.exc 15 sqm each with stainless steel channels frame U not less than 15 x 15 mm to 25 x 15 mm shaped with silicon filling & rubber beading & all necessary fitting, fixgture & SS fastener knob type, sss straps incl froasted glass coloured film and unit logo any size as required on site complete all specified and directed by Engineer-in-Charge.

S & F in aluminium anodised tubular pipe 20 mm dia type 1 m long including side bracket complete all specified and directed by Engineer-in-Charge.

Taking down old unserviceable point wiring form existing conduit/battern type (light, fan, socket or power point ) complete such as switches, ceiling rose, pendent holder. Regulator and socket etc and removing the material from siter and making good the disturbed surface of wall/floor/ceiling etc as original i. e. brick work, plastering while washing complete all specified and directed by Engineer-in-Charge.

M&L for concealed point wring with 3 x 1.5 Sq mm (nominal area) FRLS PVC insulated un sheathed and stranded cooper conductor cable/phase, neutral and earth wire in and including PVC concealed conduit ISI marked of suitable size medium grade with PVC conduit fittings such as tees, bends ,elbow, reducers including cutting chasing and marking good to disturbed surface, earth wire cover plate 3 mm thickness plastic laminated sheet for one light point complete all specified and directed by Engineer-in-Charge.

All as per item No 97 here in before but for one socket outlet point 5 amps on the same board complete all specified and directed by Engineer-in-Charge.

All as per item No 97 here in before but for one socket outlet point 5 amps on the independent board complete all specified and directed by Engineer-in-Charge.

All as per item No 97 here in before but with 3 x 2.50 sqmm (nominal area) FRLS PVC insulated unseathed and stranded copper wire 15 Amp power point complete all specified and directed by Engineer-in-Charge.

S & F Modular switch 6 Amp, 1 way, 1 module size complete all specified and directed by Engineer-in-Charge.

S & F Modular switch 16 Amp, 1 way, 1 module sizecomplete all specified and directed by Engineer-in-Charge.

S & F Modular socket two in one 6 Amp, universal type , 02 module size complete all specified and directed by Engineer-in-Charge.

S & F Modular socket 6/16 Amp, multipurpose shutter type , 02 module size complete all specified and directed by Engineer-in-Charge.

S & F Modular fan regulator step type 120 watt, 2 Module, 5 step complete all as specified and directed by Engineer-in-Charge.

S & F bell push , Modular type 5 Amp complete all specified and directed by Engineer-in-Charge.

S & F ceiling roses, insulated body, 3 terminal, 240 volts, 5 Amp, and making good surface complete all specified and directed by Engineer-in-Charge.

S & F wall mounted LED battern, extruded AL heat sink provided for efficient heat dissipation and integrated 230 W LED after replacement of existing light complete all specified and directed by Engineer-in-Charge.

S & F mirror light 02 Ft Linnet reflection without after replacement of existing light complete all specified and directed by Engineer-in-Charge.

S & F 18 W LED surface mounted downlight after replacement of existing light complete all specified and directed by Engineer-in-Charge.

Supply. Fixing and testing of Wall mounted fan 450 mm including suitable size PVC wire complete all specified and directed by Engineer-in-Charge.

S & F Celing fan type of size 1400 mm sweep 230/245 CFM with service value complete all specified and directed by Engineer-in-Charge.

S & F MCCB 415 volts, four pole of cap 125 Amps, 10 KA ICS = 100% ICU with thermal magnetic release complete all specified and directed by Engineer-in-Charge.

S & F in repair of single pole MCB 6 to 32 Amp 240 volts, 50 Hz AC made form mouleded self complete all specified and directed by Engineer-in-Charge.

M&L for laying of LT underground cable XLPE insulated PVC sheathed galvanised steel strip/wire armoured, aliminium conductor, 1100 Volts complete all specified and directed by Engineer-in-Charge.