CONSTRUCTION AND STRENGTHENING WORK OF SWIMMING POOL IN NILAMBAG FOR BHAVNAGAR MUNICIPALCORPORATION,BHAVNAGAR.

1.00 and disposal of unserviceable materials with all lead and 22.57 CUM 1097.15

lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.(ii) In

Removing and scraping of old deteriorated plaster of

any thickness fromm wall / R.C.C member including

stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift

Dismentaling tiled of stone floors laid in mortar

4.00 including stacking of serviceable materilas and disposal 2970.00 Sqm 49.78

of unserviceable materials with all lead and lift.

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or soft

Excavation for foundation for depth from 1.5 m to 3.0m

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

(ii) Uncoursed Rubble Masonry with hard stone of

approved quality in foundations and plinth in Cement

Mortar 1:5 (1-cement : 5-coarse sand including levelling

up etc. complete

Providing Supplying and laying Filling in foundation, plinth,

trench and uneven area of plot (for levelling and

8.00 maintianing slop) with murrum or selected soil in layers of 374.00 CUM 301.58

20 cm. Thickness. Including levelling, watering, ramming

and consolidating etc.As dirceted by Architect.

Providing and laying ordinary cement concrete M-150

and curing complete including the cost of form work but

9.00 excluding the cost of reinforcement for reinforced 445.50 CUM 4008.81

concrete work in Bases of Flooring and the like and Mass

concrete. For PCC

Providing laying Controled Reinforced cement concrete M-

using minimum Cement content @ 450 kg/Cmt including

curing etc complete including the cost of form work but

excluding cost of reinforcement for reinforced concrete work

in concrete road Coarse and fine aggregate confirming to

IS:383 maximum size of coarse aggregate not exceeding

mm, using mechanical weigh batcher, mixed as per approved

mix design, laid, placed & distributed with sufficient man

power using M.S. Side Rail of road thickness with necessary

10.00 nut bolt plates, fixing as per width, compacted with Poker 15.59 CUM 5500.00

vibrator V.D. system ( Trimix ) & Surface Plate Vibrator,

Troweling to be carried out with the same machine running

on troweling blades, finished in a continuous operation

including provision of contraction, expansion, construction

and longitudinal joints, joint filler separation membrane,

sealant primer, joint sealant debonding strip, dowel bar, tie

rod, Surface Hardner must be spread on final concrete surface

to harden the top surface, admixtures as approved, curing

compound, finishing to lines and grades including form work.

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in :

(a) Foundations, footings Bases of columns and raft slab

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

12.00 the cost of reinforcement for reinforced concrete work in 23.91 CUM 8353.00

Columns, pillars, posts and struts for columns UP TO GROUND

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

Beams, girders and cantilever up to floor For GROUND FLOOR

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

COPING/LINTEL FOR ALL FLOOR ABOVE FLOOR TWO LEVEL

Providing and Laying Controlled Cement Concrete M-250 and

curing etc. Complete including the cost of form work and

15.00 excluding the cost of reinforcement etc complete in 53.61 CUM 7267.00

R.C.C.slabs including stair for all thickness for up to ABOVE

FLOOR TWO LEVEL FOR GF

Providing TMT Bar FE 500 D/500 CRS STEEL reinforcement for

16.00 R.C.C. work including bending, binding and placing in position 17570.34 KG 72.92

complete upto floor two level

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

17.00 and plinth in Cement Mortar 1:6 (1-Cement : 6 -fine sand) (B) 141.44 CUM 4521.82

Conventional for ground floor (BRICK MASONARY) FOR

PLINTH AND GF LEVEL

Half brick masonry in common brunt clay building strength

not less than 35 Kg./Sqcm. In cement mortar 1:3 (1cement :

18.00 coarse sand) with 2 Nos. of 6 mm. Diameter mild steel round 31.68 SQM 697.17

bars after every three coarse embedded in cement mortar for

all floor up to floor two level

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand)finished with trowel

including scaffolding curing etc. comp.For all floor above floor

two level ceilings & soffits of stairs

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1- Cement:3- sand) finished with trowel

including scaffolding curing etc. comp.For all floor above floor

two level walls

20 mm thick sand faced cement plaster for OUT SIDE on walls

up to height 12 metres above ground level consisting of 8 mm

thick backing coat of C.M. 1:1 (1-Cement : 1-sand) etc.

Providing, supplying and fixing Natural Brick Cladding tiles of

size approximately 60 × 215 mm and thickness 15 mm, made

of concrete, in natural finish, on internal or external vertical

wall surfaces, including preparation of base surface by

cleaning, removal of loose particles, dust, oil and grease,

fixing the tiles using approved cementitious / polymer-

modified tile adhesive suitable for vertical applications,

maintaining proper line, level and alignment, providing

uniform joints and pointing the same with matching grout,

including cutting, shaping, finishing at edges, corners,

openings, scaffolding, tools, labour and all incidental works,

complete in all respects as per manufacturer’s specifications,

drawings and directions of Engineer-in-Charge.

Natural Brick Cladding Code 15640 – 60×215 mm, concrete,

mm thick by MyTyles, or equivalent approved make

Providing, supplying and fixing teracota square clay jali 8x8x2

inch thickness, in natural finish, on internal or external

vertical wall surfaces, including preparation of base surface by

cleaning, removal of loose particles, dust, oil and grease,

suitable for vertical applications, maintaining proper line,

23.00 level and alignment, providing uniform joints and, shaping, 46.00 SQM 1700.00

finishing at edges, corners, openings, scaffolding, tools, labour

and all incidental works, complete in all respects as per

manufacturer’s specifications, drawings and directions of

Engineer-in-Charge.

Pro. And fixing single layer water proof gypsum board

mm thick sections using water proof board of size 1220 mmx

1830 mm x 8.0 mm suspended by GI suspender channel of

size 25 mm x 3 mm with intermediate channel og size 18 mm

x 40 mm x 0.8 mm at 1220 mm center to center ceiling section

24.00 of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c and 58.30 SQM 600.94

perimeter channel A of size 20 mm x 27 mm x 30 mm x

mm at edges & drops incl.paper tap sand sofit cleat, anchor

fastener, scoch bolt connecting cleat,joining compound top

coat on ceiling incl.making necy.opening for light

fitting,diffuser etc. comp. as per detail drawing as directed.

Finishing wall with 100% weather proof EXTERIOR paint of

approved make,brand and shade on wall surfaces (two coats),

with 100% damp proof primer one coats , recessed

/embossed panels, pillars etc., give an even shade after

throughly brushing the surface to remove all the dirt and

remains of loose powdered material. The material shall be as

described in list of approved material.shade and pattern as

design by architect and directed by EIC.

Providing and laying 18-20mm average thick river polished

Granite stone slab flooring & stair trade riser with cement

mortar1:3 (1cement:3coarsesand) laid over and jointed with

26.00 grey / white cement slurry with matching color of stone 227.07 SQM 2497.00

including half round nosing, rubbing and polishing etc.

complete. shade and pattern as directed by

Architect/enginner in charge.

Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-cement :

6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand)

laid over and jointed with grey cement slurry mixed with

pigment to match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x

24'' in flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse sand )

finishing with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x

24'' in skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement: 3-coarse sand) and jointed with white

Providing and laying 24" x 24" Antiskid Vitrified 8 mm thick

tiles flooring over over 20 mm (average) base of cement

mortar 1:6(1cement : 6 coarse sand) on new surfrace jointed

with colour cement slurry including finishing with flush

pointing and cleaning the surface etc complete shade and

pattern as approved by Architect and

EIC.Asian,Simpollo,Johanson, Swastik & Rak (Premium First

Quality) FOR ALL FLOOR

Providing and laying Ceramic tiles 6 mm. Thick in

kitchen,toilet and dado on 10 mm. Thick cement plaster 1:3 (1

cement : 3 coarse sand) pointing in white cleaned jointed with

white cement slurry. size, shade and pattern as approved

(matched to flooring) for all floor WALL as design by architect

and directed by EIC

Brick bat waterproofing treatment 100mm average thick in

32.00 CM 1:3 with smooth surface finish and required slop etc, 70.40 SQM 554.00

complete as directed by Architect/Engineer

Providing and laying broken coloured chine mosaic

flooring/Wall Cladding for landscape area fountain

storage using 12 mm to 25 mm broken pieces of colourfull

glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out upto

surface using white/colour cement/grout including

rounding off junctions and extending them upto

wall,clearing with water and oxalic acid etc. as directed.

Providing and Fixing Tensile roof sheets are lightweight,

high-strength fabric membranes (like PVC-coated

polyester, PTFE, or ETFE) stretched over a support structure

34.00 (cables, steel) to create large, often column-free, curved 235.40 SQM 7794.00

roofs, offering dynamic design, natural light, and weather

protection for public spaces,including all fitting labour

etc, complete as directed by Architect/Engineer

Applying two coats of Birla (white cement based) or Asian

(acrylic lapy- putty) or equivalent & two coats of primer of

approved brand and manufacture on new wall/ceiling

surface to give an even shade including thoroughly brushing

the surface free from mortar dropping and other foreign

matter and sand papered smooth.

Wall painting ( three coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth. on walls shade and pattern

as design by architect and directed by EIC.

TOP SOIL: Supplying and spreading in position 150mm thk

layer of good approved redsieved soil including levelling,

watering, consolidation by manually or mechanically(which

37.00 ever convenient at site) at every 50mm thik layers, cost 207.57 CUM 368.00

including of allmaterials, labour and other charges required to

complete and as directed by the

Engineer In charge

Providing, supplying, laying and planting like

champa,kadam etc trees suggested area with necessary

38.00 garden soil required for trees, curing, requiredmanure, for 18.00 EACH 2505.00

soil bed etc. complete at all level, between 7 ft to 9 ft

heights as design and directed by ARCHITECT.

Providing, supplying, laying and planting different kinds of

plants, shrubs and lawnsareain suggested area with necessary

39.00 garden soil required for plants, curing, requiredmanure, 345.95 SQM 793.00

forflower bed etc. complete at all level, heights as design and

directed by ARCHITECT.

Providing and fixing pre-cast concrete kerb stone of gray

cement based concrete block 30cm length,45cm height and

40.00 15cm thick of M250 grade concret as per approved design and 55.00 RMT 264.00

including excavation for fixing in proper line and level,filling

the joint with C:M 1:3 (1cement:3fine sand) etc complete.

Providing and fixing pre-cast Rubber Dye / steel Dye inter

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 : 2006 including

35 mm Sand layer for levelling and filling the joint with sand

in proper line and level as per guidlines of IRC : SP 63-2018

etc. Complete.as Approved & directed by Architect/enginner

Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I.Cover with frame of

mm x 300 mm size (inside) with standard weight. 100 m x

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35 kg. Cm² in C.M. 1:5 C.I. cover with

frame (Light duty) 455 mm x 610 mm internal dimensions,

total weight of cover with frame to be not less than

kg.(Wt. of cover 23 Kg.) and (Wt. of frame 15 Kg.) R.C.C. top

43.00 slab with 1:2:4 mix (1-cement :2-coarse sand : 4- graded stone 5.00 EACH 2903.89

aggregate 20 mm size) foundation concrete 1 :5 :10 inside

plaster 15 mm thick with cement mortar 1 :3 finished smooth

with a floating coat of neat cement on walls and bed concrete

(A) Inside dimensions 500 mm x 700 mm and 450 mm deep

for pipe line with one or two inlets.

Providing and constructing Sewer manholes, scraper

manholes and unit house connection chamber, as per the

type design in brick masonary in C. M. 1:3 ,inside and outside

lastering in C. M. 1:3 necessary coping in R.C.C.M. 200 fixing C.

I. steps and fixing manhole frame and covers (But excluding

supply of manhole frame and covers) over manholes and

house connection chambers and fixing Manhole covers (but

excluding supplying of manhole covers) over scraper manhole

etc. complete, providing and fixing safety chain wherever

necessary as per the stipulations in the type desing complete

(excl. excavation). Manhole type "A" circular type having

inside diameter of minimum 1200 mm and for depth from

M to 1.50 M (for 150 mm to 500 mm dia sewers). Manhole

type "A" as above but up to 1.0 M depth.

Providing and fixing Anodized hollow section alluminium frame

door fully galzed pivoted alluminium dubble shutter door

having alluminium frame section of alluminium frame of 101.60 x

44.50 x 1.42 mm having shutter style 70.00 x 44.45 x 1.55 mm top

and bottom rail 114.00 x 44.45 x 1.55 mm lock rail

45.00 x 44.45 x 1.97 mm.glazing clip 19 x 17.2 x 0.6 mm with 5 mm thick 16.50 SQM 4360.84

transparent float glass copper tinted fixed with transparent

silicon gasket & double action floor spring (Heavy duty) with S.S.

plate having I.S. mark and including all required

accessories fitting fasterning accessories and locking

arrangment etc,complete as directed by engineer in charge.

Provoding and fixing flush door shutters, solid core

construction with frame of first class hardwood with cross

board and face veneer or plywood face panels, including

46.00 anodised alluminium butt hinges with necessary screws. 26.45 SQM 1811.62

(B) Non-decorative type and block board core anodised

alluminium butt hinges in flush door shutters (2) 35 mm

Providing & Fixing Aluminium Fix Louvers panel (Z slope

shape)size of 103.2 mm 1.4 mm, with back Frame 63.x 38 x

1.5 mm thick Aluminium Rectengur tube, Colour Powder

coated section ( Eckzonoble )

CHANGE ROOM LOCKERS:- Providing,

Supplying, and installing Lockers of overall size of each column

contain 4 lockers. Size of column to be 300 mm w x 450 mm d

x 1800 mm ht and 100 mm base and size of each locker to be

300 mm w x 450 mm d x 450 mm ht. fabricated from 3 mm

thick compact laminate for sides and back portion and 9 mm

48.00 thick compact laminate for top, bottom and selves / shutter 50.00 EACH 6678.00

with standard accessories like

(a) Aluminum inter locking, (b) S.S cam lock with D-number

plates, (c) 304 grade S.S hinges, (d) Door stopper Rubber linings,

(e) S.S screw and rubber plugs, etc. complete To be fabricated

as per design of "MERINO" OR "GREENLAM" OR "SUNMICA"

supplies and as per drawings. (Refer attached

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed

with color cement slurry including finised with flush pointing

& cleaning the surface etc. complete for DARK shade

Providing and applying rustic texture finish on prepared

internal/external wall surfaces with approved make and shade,

50.00 including surface preparation, primer, materials, labour, tools, 276.00 SQM 1439.00

scaffolding, and all complete as per directions of Engineer-in-

Charge(look like dholpur to match nilambag palace gate.)

Providing and fixing bakelite sheet door & partition with

aluminium/MS frame, specified thickness backlight sheet/glass,

51.00 approved fittings, hardware and accessories, complete in all 40.66 SQM 1548.00

respects as per drawings and directions of Engineer-in-Charge.

SITC of Starting Platform with Back Stoke Handle and 500mm

FRP Top with 400 mm Heights and support plate that is

fully adjustable. Platform in slip resistance fibreglass.

52.00 Electropolishing Treatment to Gurantee High, long lasting

resistance to corrosion, Adhesive number and SS Screws

Providing, supplying and fixing swimming pool lane rope with anti-

wave plastic discs mounted on nylon/polypropylene core rope,

complete with stainless steel (SS 304/316) stands/anchor posts, fixing

53.00 accessories, tensioning devices and fittings, suitable for chlorinated

water, including installation, alignment, testing and making fully

functional, as directed by Engineer-in-Charge.(110mm)

Providing and fixing window & tofen window frame of

alluminium casement window Z series r40 with 5mm

toufened glass & epdm gasket with all standard accessary

full-height as per drawing from finished floor level up to

false ceiling / slab, aluminium hollow box section

framework (minimum 2.0 mm thick) fixed to floor, ceiling

and walls, corners, junctions and frames, fixing 5 mm thick

toughened glass conforming to IS 2553 of approved make

such as Saint-Gobain / AIS / Modiguard or equivalent in

aluminium glazing channels with EPDM gaskets and

silicone sealant, including provision for window openings,

service , all labour, materials, tools, scaffolding and

incidentals, complete as per drawings and directions of

Engineer-in-Charge.

Providing, supplying, fabricating and placing two-seater

sofa of approved design and finish, having approximate

size 1.20 m length × 0.55 m depth, with seating height

about 0.40 m and overall height about 0.75 m. Internal

frame made of seasoned hardwood members and 18 mm

thick IS 303 grade MR plywood for seat, back and arm

support. Seat and back cushions made of standard

density polyurethane (U-foam). Sofa upholstered with

rexine / artificial leather upholstery fabric of approved

shade and texture, neatly stitched and finished. Sofa

mounted on metal / SS legs, including all materials, foam,

upholstery, stitching, adhesives, labour, transportation and

placing at site, complete as per approved drawings and

directions of Engineer-in-Charge.

Providing, supplying, fabricating and installing office table

with side table (credenza) of approved design and finish,

comprising main table of size 1.80 m × 0.75 m × 0.80 m

height and side table of size 1.20 m × 0.45 m × 0.65 m

height, manufactured from 18 mm thick IS 303 grade MR

plywood. Table top, panels and structural members shall

be made of MR plywood and finished with 1.0 mm thick

decorative laminate of approved shade and make like,

Greenlam, Merino, Centurylam Etc. All exposed edges

56.00 shall be provided with seasoned hardwood edge lipping, 1.00 each 35207.00

neatly rounded and finished with melamine polish. Side

table shall be provided with drawers / storage units

mounted on heavy-duty telescopic drawer channels of

Suzu / Hettich / equivalent approved make. Including all

necessary hardware such as drawer channels, hinges,

handles, locks, screws, adhesives, cutting, assembling,

polishing, finishing, transportation, loading, unloading and

fixing at site, complete in all respects as per approved

drawings and directions of Engineer-in-Charge.

Visitor's Chair (Non-Revolving, back height 17")

fabricated pipe stand CRC powder coated sections,

excell P.P. Cushion Arm , Leatherite fapestry as per

selection of EIC ( Greeken Modal no. 226 A)

Providing and fixing standared extruded of alluminium

section of size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt

with colour anodized alluminium frame as details etc

complete for Fix window/gap/elevation.all fitting material

& labour including fixing as per detail given and as

directed by architect/engineer in charge.

Providing and fixing three-seater sofa made of Stainless

Steel (SS) frame, constructed with heavy-duty SS tubular

sections (Grade SS 202/304), duly welded, buffed and

polished. Seating and backrest made with high-density

foam and upholstered with premium quality

leatherette/fabric as approved. Complete with armrests,

rubber/PVC end caps, proper leveling, fixing, and

finishing, including all materials, labour, tools, and

accessories, as per specification and direction of

Engineer-in-Charge.

Providing & fixing alluminium full length top & bottam rail

support railing with toughened glass panels of height

cm, , including handrail, posts, clamps, base plates,

anchor fasteners, 10–12 mm thick safety glass, fabrication,

polishing, and installation, complete as per approved

drawings and instructions of Engineer-in-Charge.

EXTERIOR SIGNAGE LETTER:- Providing and fixing acrylic

name plate made of high-quality cast acrylic sheet of

minimum 5–8 mm thickness, clear/colored as approved,

duly UV printed / laser engraved / vinyl pasted with name,

61.00 designation, logo, and approved matter. Fixed with 24.00 sqm 4796.00

stainless steel/brass stand-off fittings, screws, and

accessories on wall/door, including inside led light fiting

with all materials, labour, cutting, polishing, finishing, and

installation, complete as directed by Engineer-in-Charge

Providing,Making, Fabricating, Eracting with Fixing M.S.

Fabricated Structure as per design, , m.s flat , M.S.box

pipe, M.S. round dia pipe M.S.Hollow Pipe top cover as per

design (square/round), M.S. polished square and round

shape as per design,MS angle & GI Concertina coil wire

for fencing, M.S Polished flat with making required size

hole at required spacing as design by architect and

directed by EIC.and hold fast with coach bolts & required

fitting including all as per drawing etc. complete.as design

by architect and directed by ARCHITECT.

Applying priming coat over new steel and other metal

surfaces after and including preparing the surface by

thoroughly cleaning, oil grease, dirt and other foreign

matter and scoured with brushes fine steel wool, scrapers,

and sand paper with ready mixed priming paint brushing

Painting two coats (excluding priming coat) on

new steel and other metal surfaces with enamel

64.00 paint, brushing interior to give an even shade including 785.40 SQM 93.46

cleaning the surface of all dirt, dust and other foreign

Providing and fixing C.P.V.C. water supply pipes schedule

pipes confirming to ASTM F-441 for hot as well as cold water

supply with necessary fitting like Tee, Elbows, Union, coupler,

etc. in walls as well as floors concealed in walls and finishing

the wall with cement mortar to give each finish of brands like

Astrl or Finolex. Complete with necessary scaffolding at all

(A) 15 mm Ø C.P.V.C. pipes.

66.00 -Do- (B) 25 mm Ø C.P.V.C. pipes. 200.00 RMT 251.31

67.00 -Do- (C) 32 mm Ø C.P.V.C. pipes. 150.00 RMT 334.89

68.00 -Do- (D) 40 mm Ø C.P.V.C. pipes. 100.00 RMT 443.29

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

69.00 Foundation (NSF) seal for potable water of following dia. 100.00 RMT 654.04

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc.complete. [F] 50mm.

Providing and fixing in position C.P.V.C. Ball valve confirming

70.00 to ASTM F-441 to water supply line. (A) 25mm Ø C.P.V.C. Ball 20.00 EACH 481.00

71.00 -Do- (B) 32 mm Ø C.P.V.C. Ball valve. 5.00 EACH 539.00

72.00 -Do- (C) 40 mm Ø C.P.V.C. Ball valve. 5.00 EACH 597.00

Providing and laying to level and slope` under ground

73.00 drainage/sewerage U.P.V.C. 'Foam Core' pipes with 3 layer 75.00 RMT 390.00

outer and inner solid P.V.C. (A) 110 mm Ø 3.2 mm thick.

Providing and laying to level and slope` under ground

74.00 drainage/sewerage U.P.V.C. 'Foam Core' pipes with 3 layer 50.00 RMT 579.00

outer and inner solid P.V.C. (B) 160 mm Ø 4.7 mm thick.

Providing and laying to level and slope` under ground

75.00 drainage/sewerage U.P.V.C. 'Foam Core' pipes with 3 layer 25.00 RMT 730.00

outer and inner solid P.V.C. (C) 200 mm Ø 4.7 mm thick.

PProviding and fixing washbasin with single hole for pillartap

with C.I. or M.S. brackets painted white includingsutting holes

76.00 and making good the same but excluding fittings.(A) Vitreous 8.00 EACH 1505.90

China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour

Providing and fixing C.P. Pillar cock 15 mm Heavy duty swan

neck with flange and wall flange of make like Jaguar, ESS ESS,

Cera (to be provided for water tubes in no.) C.P. Pillar cock

mm Heavy duty swan neck

Providing and fixing Urinal of approved quality

includingconnection with trap and with integral

longitudinal flush pipe complete set (unit) including

connecting the whole unit with water supply and

drainage.(in nos.) .(A) Squating plate pattern white

earthenware 550mm x 300mm.

Providing and fixing wash down water closet (European type,

W.C. Pan) with integral P or S trap including jointing the trap

with soil pipe in Cement Mortar 1:1 (1-Cement : 1- fine sand)

79.00 (A) vitreous China Pattern :(i) in white colour (all C.P. fitting of 11.00 EACH 1343.38

approved brand like Jaguar, ESS ESS or Cera) complete set

(unit) including connecting the whole unit with water supply

and drainage.(in nos.)

Providing and fixing chromium plated brass half trun

80.00 flushcock of approved quality including fixing in pipe line 18.00 EACH 261.16

etc.complete.(ii) 25mm dia

Providing and fixing self closing press matic bib cock with

81.00 flange and wall flange of make like Jaguar, ESS ESS, Cera (to 18.00 EACH 1584.00

be provided for water tubes in no.)

Providing and fixing C.P. brass shower rose with 15mm or

20mm inlet.(A) 100mm dia. Each

83.00 Concealed cock 15 mm Heavy duty with cap 24.00 EACH 486.44

OVER HEAD PVC WATER TANK : Supplying, lifting and

installing in position, PVC water tank 'EURO' or equivalent

having cross section of tank wall having outer coloured layer,

U.V resistant layer, insulating layer and anti bacterial inner

layer. Cost including transporting, labour and making

necessary connection for inlet, outlet, linkage, overflow, wash-

out, etc.with required platform etc. as directed by engineer in

Providing and fixing cast iron (Spun) Nahni trap of the

following nominal diameter of self cleaning design with C.I.

85.00 screaed down or higned grating including cost of cutting and 27.00 EACH 645.09

making good the walls and floor 100mm inlet and 50mm

outlet.(C) 100mm dia.

Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete. Cat III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

with 6A Modular type switch and hum free EME step

type electronic fan regulator mounted and

accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.(f)

with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete.Cat III

Point wiring for Individual Plug with & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall /

ceiling as per pipe erected with following type of

accessories.[II] For 16A Plug and 16 amp switch with

2-2.5 sq.mm Cu. Wire from mcb db board.(f) with

medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat III.

Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following

type accessories. Cat III.

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

90 metallic/white front plate , modules erected with 21.00 Each 344.00

necessary connections as per site situation directed

by Engineer In charge(13) 6A/10A/16A/20A/25A/32A

Single pole Modular MCB Switch. Cat III.

(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular

Providing & laying approved make ISI marked HDPE 6Kg

/ cm2 (Class-3) as per IS:4984:1995 PE-80 to be erected

92 at road crossing on or floor as directed for laying of cable. 300 Rmt 190.00

The pipes as following size of dia & weight per 6 mtr.(b)

Supplying and erecting Flexible PVC insulated multi strand

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed.(k) 4.00Sq.mm

core round PVC sheathed

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV.

94 to be laid on wall with necessary clamps or in existing 250 Rmt 160.00

trench / pipe of following size of cables(C) 4 core 10 Sq.

Providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed

in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size (A)

With medium class Rigid PVC pipe and

accessories(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed

in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size(A)

With medium class Rigid PVC pipe and

accessories(b) 2 wire 2.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe

to be erected in / on wall / ceiling with 2.5 sq. mm copper

97 conductor FRLS PVC insulated stranded wire of green 300 Rmt 123.00

colour for earth continuity of following size (a) with

medium class Rigid PVC pipe and accessories(a) 2 wire

supplying and erecting sheet steel powdercoated cable

and termination box to be mounted on top or bottom of

98 the m.b.b.distribution box for housin/ covering extra wires 4 each 930.00

and cables suitable for followingsize of m.c.b. db box.

Three phase double 12way double door.

S.I.T.C. submersible pump set suitable for bore of 100 mm.

dia. or more having three phase motor capacity not more

than 5 H.P. with following capacity . Lifting and Lowering

taken extra. (A) (25 stage) 120 to 125 LPM discharge at

to 120 mtrs. head respectively suitable for 50 mm dia.

Supplying and erecting Direct on line starter with 30 Amp.

(resistive @ 230v) power relay and with 2 to 5/ 4 to 10 / 8 to

20 amp. Range C.T. Operated electronic overload relay in

engineering grade plastic enclosure for 3 ph 415v 50 HZ

A.C. motor up to 7.5 HP with high voltage protection

(above 480 v) and under voltage protection (below 330 v)

100 current sensing single phasing protection. Reverse 1.00 each 2532.00

phasing protection, inverse current characteristic

overload protection with indication for On, OL, HV,LV SPP

in a single unit with feather touch start / stop push button,

high temperature with standing Bakelite terminals

complete erected on P.W. Block with necessary

connection. [Cat.II]

Supplying & erecting in earthpit of minimum bore dia.

225mm size ASH or approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS

3043-1987 made of corrosion free G.I.Pipes having Outer

pipe dia of 80 mm having 80-200 Micron galvanising,

Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with

101 constant ohmic value surrounded by highly conductive 1.00 each 12375.00

compound with high charge dissipation suitable for panel

earthing.[A] For electrical installation up to 440 V (c) For

Electrical Installation covering Transformer Neutrals,

Lightning arrester Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA) i.e independent Earthing

in normal soil. Length of Pipe : 2.00 mtrs Back filling

Compound :2 nos Bags of 25 Kg.

Providing one bag of 25 Kg. Additional Back Filling

Compound (BFC) suitable for safe earthing device.

Providing and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

providing and erecting Approved make ELCBs / RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and suitable

for operation on 3 phase and neutral 415V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component

for following Max. rating erected as directed. (ii) 40Amps.

providing and erecting Mains with ISI marked electrolyte

stranded copper conductor, Non PVC Zero Halogen free

fire retardant insulated copper conductor, insulated wire

(HRFR) conforms to IS-694, erected in existing pipe with

1.5sq. mm copper conductor of same specifications for

earth continuity of following size. (a) 3 core 1.5 Sq. mm

106 -Do- 3 core 2.5 Sq. mm 50.00 RMT 101.00

107 -Do- 3 core 4.0 Sq. mm 50.00 RMT 139.00

providing and erecting Approved make ELCBs / RCCBs

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on 3 phase and neutral

108 415V,50Hz. having characteristic of quick action & 1.00 EACH 4272.00

tripping with all advance feature & do not incorporate

any electronic component for following Max. rating

erected as directed. 100 Amps FP (100 mA Sensitivity)

Supply, Installation, Testing and Commissioning of suitable

sweep, BEE 5 Star rated, Ceiling fan with Brush Less

Direct Current (BLDC) permanent ferrite magnet

Motor, class of insulation: B, Rust free

nos.Aluminium blades, 2 nos. canopies, shackle kit with

earthing provision, 22 gauge copper winding, Power

factor not < 0.9, Service Value (CMM/W) minimum

6.85, Air delivery minimum 215 CMM, 350 RPM,230v

109 (tolerance as per IS : 374-2019), THD < 10%, remote 2.00 EACH 3370.00

or electronic regulator unit for Speed Control and all

remaining accessories including safety pin, nut bolts,

washers, temperature rise = 75 degree C (Max.),

suitable for 140 to 285 Voltage and rectifier circuit

with surge, over current and overload protection ,

Hz, Single phase AC Supply, earthing etc. Complete as

required.[ Make shall be approved by Engineer in

Charge] B) 1200 mm Sweep (48")

EDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

110 Luminaire efficacy> 85 lumens/watt , 45.00 EACH 688.00

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Square/ Circular

shaped Surface/Recessed Mount Downlight with provision

for spring loaded mounting clips complete.IP20(iii) 16-20

watts, Surge-2 KV cat.iii

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Tube Light with

integral driver(v) 36-40 Watts, Surge-2 KV, IP-20,

conventional 4 feet cat III

(E) Under Water Light,12V DC including Driver,IP-67 with

die-cast/deep drawn housing with impact resistance

clear toughened glass. (ii) 12 watts cat.iii FOR WALL LIGHT

ON COMPOUND WALL

113 (F) Spot Light 425 Lumens, Surge-2KV(ii) 8 to 11 Watts cat iii 25.00 EACH 1597.00

Supplying & erecting approved make low noise

decorative exhaust fan having square frame ABS body

with inbuilt lowers & square frame.200mm with 1350RPM

Supplying & erecting approved make Four Pole 415V

Motorised Automatic transfer switch including controller

with UV/OV, phase sequence, single phasing and

frequency protection interior for panel mounting with

operating mechanism A.C.23A duty confirming to IS for (F

Providing and erecting busbar chamber confirming to IS-

375 fabricated from 16 G.M.S. sheet, dust & vermin proof

having hinged door with rubber gasket and necessary

busbar supports with Aluminium busbar having current

density not more than 0.8 Amp. / sq.mm (Rated current /

116 cross section area) duly wrapped with colour insulation 1.00 EACH 6720.00

tape for phase sequence, three phase & neutral each

Suitable for following current capacity with necessary

painting mounted on wall or pedestal frame of required

size with necessary connections.(D) Suitable for 400 Amp.

Providing and erecting Sheet Steel powder coated

Vertical MCB distribution board (VTPN) - flush /

surface mounted double door (IP54) fitted with

insulated copper busbar, isolated neutral link, earth

117 bar and DIN rail, confirming to IS 13032 and BS 5486- 1.00 EACH 18480.00

1986,IP-54 suitable for 250 AMP TPN MCCB +

RCCB as incomer and three phase outgoing as per

following .(The DBs should be used of same company

of MCB to be used) (D) 12 way outgoing

Solder less crimping type Copper lugs conforming to IS

suitable for cable of following size evenly crimped with

118 high pressure tool & connected to switchgear terminals 25.00 EACH 8.00

with brass/cadmium plated nut bolts in an approved

manner. (A) 1.5/2.5 to 6 Sq.mm for 2.5sqmm

Supplying and erecting approved make Conical Pole

(Standard ) Made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759 with required base

plate and integral Junction box consist of terminal plate of

min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-

Rail for MCB Mounting, stud type terminal and

arrangement for cable terminationas erected on suitable

foundation (included) with necessary GI nut-bolts/J-Bolts.

as per details given by manufacturer considering site

requirement.The length of poles are as below.(D) 6 Mtr.

Long 65mm Top X155 mm bottom dia, 3mm thickness.

Providing 1:2:4 cement concrete foundation & 70 % PCC

from bottom including excavation for the pole of size 45 x

45 x 100 cm. Deep in below ground level with plinth of

cm x 45 cm (or 45 cm dia x 45 cm) high upper ground

level with necessary curing and finishing in approved

manner. ( for 4 & 6 mtr pole+ flood light)

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Street Light (IP-

65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.(ii)

above 48 to 60 Watts Cat-lll

Supply, Installation, testing and commissioning of

Computer System with UPS system for Surveillance and

Monitoring - Pentium Core i5 with up to 4.70Ghz CPU

speed, minimum of 8 GB RAM, up to 24MB cache,

122 52X32X52X CDRW Drive & 2TB HDD, optical Mouse, 106 1.00 EACH 40000.00

keys keyboard,Mouse, 2 nos. 10/100 Mbps Ethernet card

,USB connection & internal modem, 17" colour graphics TFT

monitor & Original Windows 11 and anti-virus software

loaded. (Dell/Lenovo/HP)

SITC of 4 Megapixel up to 20 meter IR IP66 ,Varifocal

,Water Proof outdoor type Bullet IP netwrok Camera : Up to

4 megapixel high resolution Full HD1080p video Dual

stream with 4mm lens - 3D Digital Noise Reduction3-axis

adjustment DC12V Support H.265+ with all required

Supply, Installation, Testing & Commissioning of 16 port

Supply, Installation, Testing & Commissioning of 24 CH port

Supply, Installation,Testing & Commissioning of 16 TB Hard

Supply, Installation,Testing & Commissioning of 4U Rack

With Required Accessory. Outdoor or Indoor

Supplying & erecting approved make LAN cable of

following size in existing pipe as per direction [C] CAT -

129 Supply and Installation of HDMI CABEL. 15.00 RMT 120.00

130 Junction box for CCTV Camera 10.00 nos 275.00

Add Labor Cess 0.01