Repair to certain wooden furniture at BSO yard under GE Dehradun.

Amount

Chair Dining FD-228, 279 Rear Legs - Taking down old u/s Rear Leg and Material & labour for New leg made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Front Legs - Taking down old u/s Front Leg and Material & labour for New leg made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Side Rail - Taking down old u/s Side Rail and Material & labour for New Side Rail made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Front or Back Rail - Taking down old u/s Front or Back Rail and Material & labour for New Front or Back Rail made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Bottom Stiffener - Taking down old u/s Bottom Stiffener and Material & labour for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Back Strip - Taking down old u/s Back Strip and Material & labour for New back strip made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Bracket - Supply and fix new bracket triangular shape of size 75 mm x 75 mm x 25 mm with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair complete all as shown on drawing and as directed by Engr-in-Charge.

Shoes - Removing old/worn out rubber shoes and Supply & fix new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

Polishing - Material and labour for two coats of french polish after prepartion of old surface for glossy finish complete all as specified & directed by Engr-in-Charge.

Chair Writing FD-202,250, 280

Rear Legs Taking down old u/s Rear Leg and Material & labour for New leg made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Front Legs Taking down old u/s Front Leg and Material and labour for New leg made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Side Rail Taking down old u/s Side Rail and Material & labour for New Side Rail made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Front or Back Rail Taking down old u/s Front or Back Rail and Material & labour for New Front or Back Rail made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Bottom Stiffener Taking down old u/s Bottom Stiffener and Material & labour for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Back Strip Taking down old u/s Back Strip and Material and labour for New back strip made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Bracket : Supply and fix new bracket triangular shape of size 75 mm x 75 mm x 25 mm with 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chair complete all as shown on drawing and as directed by Engr-in-Charge.

Shoes : Removing old/worn out rubber shoes and Supply & fix new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

Arms Rest: Taking down old u/s Arms Rest and Material and labour for New leg made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Polishing: M&L for two coats of french polish after preparation of old surface for glossy finish complete all as specified & directed by Engr-in-Charge.

Chair Easy FD-229, 201

Rear Legs : Taking down old u/s Rear Leg and Material & labour for New leg made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Front Legs: Taking down old u/s Front Leg and Material & labour for New leg made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Side Rails of Seat: Taking down old u/s Side Rails of Seat and Material & labour for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front/ Back Rails of seat : Taking down old u/s Front / back Rail of Seat and Material & labour for New front / back Rail made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Side Rail Back: Taking down old u/s Side Rail of Back and Material & labour for New side rail made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Top/Bottom Rail of Back: Taking down old u/s Top/Bottom rail of Back and Material & labour for New top / bottom rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front Support Rail : Taking down old u/s Front Support Rail and Material & labour for New support rail made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Shoes :- Removing old/worn out rubber shoes and Supply & fix new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

Arms Rest: Taking down old u/s Arms Rest and Material & labour for New arms rest made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Polishing: Material and labour for two coats of french polish after preparation of old surface for glossy finish complete all as specified & directed by Engr-in-Charge.

Chair Dining Officer FD/MAP-ll/04 & FD-357

Rear Legs Taking down old u/s Rear Leg and Material & labour for New leg made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Front Legs Taking down old u/s Front Leg and Material & labour for New leg made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Side Rail Taking down old u/s Side Rail and Material & labour for New Side Rail made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Front or Back Rail Taking down old u/s Front or Back Rail and Material & labour for New Front or Back Rail made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Bottom Stiffener Taking down old u/s Bottom Stiffener and Material & labour for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Back Strip Taking down old u/s Back Strip and Material & labour for back strip made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Bracket : Supply and fix new bracket triangular shape of size 75 mm x 75 mm x 25 mm with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair complete all as shown on drawing and as directed by Engr-in-Charge.

Shoes : Removing old/worn out rubber shoes and Supply and fix new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

Removal of old cushion and Supply & fixing of new seat cusion of 75 mm thick 40 density complete with approved tepestry. Cloth Rate of tapestry should not be less than Rs 350/- per RM. complete all as shown on drawing and as directed by the Engr - in - Charge.

Polishing: Material & labour for two coats of french polish after preparation of old surface for glossy finish complete all as specified & directed by Engr-in-Charge.

Bed Hard FD-246

TOP : Material & labour for replacement of worn out plywood top from Bed Hard/Bed Newar, with New Plywood top of 12 mm thick, BWR grade, ISI Marked confirming to IS-303 Make : Greenply/Archidply/Century in one piece, fixed with suitable screws complete, all as specified on drg and as directed by Engr-in-Charge.

Long Rail : M &L for replacement of old broken long Rail made out of teak wood complete all as per drg complete all as specified and directed.

Short Rail : M &L for replacement of old broken short Rail made out of teak wood complete all as per drg complete all as specified and directed.

Head Board : Taking out all broken worn out component of head board and Material & labour for frame of teak wood and Teak face ply one side and other side commercial ply BWR ISI Marked grade for head board complete all as per drg.and as directed.

Foot Board : Taking out all broken worn out component of head board and material & labour frame of teak wood and Teak face ply one side and other side commercial ply BWR ISI Marked grade for head board complete all as per drg.and as directed.

Middle Stiffner : Material and labour for replacement of old broken stiffener with new one made out 2nd class hard wood, complete all as per Drg and as specified.

Steel bent clamp for corner :S &F MS clamp made out mild steel flat iron size 35 mm x 5 mm including 2 coats of synthetic enemel paint over a coat of redoxide primer, complete all as specified.

Polishing: Material & labour for two coats of french polish after preparation of old/ new surface complete all as specified & directed by Engr-in-Charge.

Chair WBB FD-56/285

Rear Legs Taking down old u/s Rear Leg and Material & labour for New leg made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Front Legs Taking down old u/s Front Leg and Material & labour for New leg made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Side Rail Taking down old u/s Side Rail and Material & labour for New Side Rail made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Removing of old broken Seat and Supply & fix new seat of Existing size with 50mm thick Foam cushion Pasted with suitable adhesive over 12mm thick plywood fixed on IInd Class HW frame & Seat surface covered with best quality tapestry cover & screwed to track rail as directed by Engr-in-Charge.(cloth should not less than@350/-mtr)

Bottom Stiffener Taking down old u/s bottom stiffener and Material & labour for New bottom stiffener made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Back Strip Taking down old u/s back strip and Material & labour for New back strip made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Shoes: Taking out worn out/unserviceable shoes from legs Supply & fix new shoes of hard PVC of superior quality with steel screw to the legs of the item complete all as specified and directed by Engr-in-Charge

Bracket : Supply and fix new bracket triangular shape of size 75 mm x 75 mm x 25 mm with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair complete all as shown on drawing and as directed by Engr-in-Charge.

Polishing: Material & labour for two coats of french polish after preparation of old surface forl glossy finish complete all as specified & directed by Engr-in-Charge.

Sofa Set 4 Seater FD-281 & MAP-ll/02

Front/Rear legs : Taking down old U/S front/ rear leg of sofa set 4 seater and S& F new front/ Rear leg made out of teak wood as per existing shape and size complete all as specified in drawing and as directed by Engr-in-Charge

Side Back/Front Rail : Taking down old U/S Side back/Front Rail of sofa set 4 seater and supply & fix new Side back/Front Rail made out of teak wood as per existing shape and size complete all as specified in drawing and as directed by Engr-in-Charge Back/ Front.

Battens for Seat/Back : Taking down old U/S batterns for seat/back of sofa set 4 seater and S& F new batterns for seat/back made out of teak wood as per existing shape and size complete all as specified in drawing and as directed by Engr-in-Charge

Arms : Taking down old U/S Arms of sofa set 4 seater and supply & fix new Arms made out of teak wood as per existing shape and size complete all as specified in drawing and as directed by Engr-in-Charge

Cushion for Seat : Removing of existing U/S cushion from seat of sofa set 4 seater and Supply & fix new foam cushion 100 mm thick 40 density Make : Kurlon/sleepwel duly stiched with fine standard thread and providing best quality chain with runner on one side of tapestry cloth as approved by GE/Engr-in-Charge complete all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 550.00 Per RM)

Cushion for Back : All as per item No 7.05 here-in-above but Cushion for Back complete all as specified and directed.

Shoes : Taking out worn out/unserviceable shoes from legs and Supply & fix new shoes of hard PVC of superior quality with steel screw to the legs of the item complete all as specified and directed by Engr-in-Charge

Cover Only for Sofa Set 4 Seater : Opening and taking out old unserviceable Cushion Cover size 21"x22"x4" and Supply & fix New Cushion Cover made out of approved Tapestry cloth of best qualy duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. complete all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 550.00 Per Sqmt)

Polishing: Material & labour two coats of french polish after preparation of old new surface, complete all as specified & directed by Engr-in-Charge.

Sofa Set 5 Seater FD-281 & MAP-ll/02

Front/Rear legs : Taking down old U/S front/ rear leg of sofa set 5 seater and S& F new front/ Rear leg of teak wood as per existing shape and size complete all as specified in drawing and as directed by Engr-in-Charge

Back/Front Rail of 3 seater : Taking down old U/S Side back/Front Rail of sofa set 5 seater and S& F new Side back/Front Rail of teak wood as per existing shape and size complete as specified in drawing and as directed by Engr-in-Charge Back/ Front.

Battens for Seat/Back : Taking down old U/S batterns for seat/back of sofa set 5 seater and S& F new batterns for seat/back of teak as per existing shape and size complete as specified in drawing and as directed by Engr-in-Charge

Arms : Taking down old U/S Arms of sofa set 5 seater and S& F new Arms of teak wood as per existing shape and size complete as specified in drawing and as directed by Engr-in-Charge

Cushion for Seat : Removing of existing U/S cushion from seat of sofa set 5 seater and Supply & fix new foam cushion 100 mm thick 40 density Make : Kurlon/sleepwel duly stiched with fine standard thread and providing best quality chain with runner on one side of tapestry cloth as approved by GE/Engr-in-Charge complete all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 550.00 Per RM)

Cushion for Back : All as per ser item No 8.05 here-in-above but Cushion for Back complete all as specified and directed.

Shoes : Taking out worn out/unserviceable shoes from legs Supply & fix new shoes of hard PVC of superior quality with steel screw to the legs of the item complete all as specified and directed by Engr-in-Charge

Cover Only for Sofa Set 5 Seater :- Opening and taking out old unserviceable Cushion Cover size 21"x22"x4" and Supply and fix New Cushion Cover made out of approved Tapestry cloth of best qualy duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge complete all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 550.00 Per Sqmtr.)

Polishing: Material & labour two coats of french polish after preparation of old / new surface complete all as specified & directed by Engr-in-Charge.

Stool Dressing cushion FD/MAP/ 14

Back : Taking down old U/S back side board of stool dressing and S& F new back made of Post Forming top on 18 mm thick plywood as per existing shape and size complete all as specified in drawing and as directed by Engr-in-Charge

Front and sides : Taking down old U/S front/side board of stool dressing and S& F new back made of Post Forming top on 18 mm thick plywood as per existing shape and size complete as specified in drawing and as directed by Engr-in-Charge

Top : Taking down old U/S top of stool dressing and supply & fix new top made of 12 mm thick plywood as per existing shape and size complete all as specified in drawing and as directed by Engr-in-Charge

Bottom : Taking down old U/S bottom of stool dressing and supply & fix bottom back made of 6 mm thick plywood as per existing shape and size complete as specified in drawing and as directed by Engr-in-Charge

Wheel : Taking down old U/S wheel of stool dressing and supply & fix new wheel of size 50 mm as per existing shape and size complete as specified in drawing and as directed by Engr-in-Charge

Polishing : Material & labour for two coats of french polish after preparation of old / new surface complete all as specified & directed by Engr-in-Charge.

Table Dressing Ladies MAP-07

Mirror : Removing of old/worn out U/S mirror and Material and labour for fixing new mirror 5 mm thick mirror ( Make : MODI GUARD/ATUL) as per size shown on drg & directed .

Back ply of mirror :Removing UNSV back from the mirror and Supply & fix new back made out of 6 mm thick ply wood BWR grade complete all as specified in the drg and as directed by Engr in Charge.

Top : Removing UNSV top and Supply & fix new top made out of 18 mm thick pre laminated MDF Board exterior grade complete all as specified in the drg and as directed by Engr in Charge.

Bottom : Removing UNSV bottom and Supply & fix new Bootom made out of 12 mm thick plywood complete all as specified in the drg and as directed by Engr in Charge.

Drawer : Removing old worn out drawer from the table and supply & fix new drawer made out of 18 mm thick perlaminated MDF board complete all as specified in the drg and as directed by Engr in Charge .

Knob : Removing unservicable knob from the table and Supply & fix new CP knob 40mm size to suit to the drawer complete all as specified in the drg and as directed by Engr in Charge.

Cushion : Taking down old U/S cushion and S& F new cushion 32 density and 75 mm thick complete with upholstry ( not less than Rs 550 /- per RM) as per existing shape and size complete all as specified in drawing and as directed by Engr-in-Charge

Shutter : Removing old worn out shutter from the table and Supply & fix new shutter made out of 18 mm thick perlaminated MDF board complete all as specified in the drg and as directed by Engr in Charge .

Polishing: Material & labour two coats of french polish after preparation of old / new surface complete all as specified & directed by Engr-in-Charge.

Table Bed Side FD-213

Top / Shelfs : Removing UNSV top/shelf and Supply & fix new top/shelf made out of 18 mm thick WPC Board (ISI Marked) complete all as specified in the drg and as directed by Engr in Charge.

Side : Removing UNSV side and Supply & fix new side made out of 18 mm thick WPC Board (ISI marked) complete all as specified in the drg and as directed by Engr in Charge.

Back : Removing UNSV back and Supply & fix new back made out of 18 mm thick WPC Board (ISI Marked) complete all as specified in the drg and as directed by Engr in Charge.

Polishing: Material and labour two coats of french polish after preparation of old / new surface complete all as specified & directed by Engr-in-Charge.

Table 3 x 3 FD-223

Top : Removing UNSV top and Supply & fix new top made out of 18 mm thick pre laminated MDF Board exterior grade complete all as specified in the drg and as directed by Engr in Charge.

Leg : Removing UNSV leg and Supply and fix new leg made out of teak wood as per existing shape and size complete all as specified in the drg and as directed by Engr in Charge.

Front/side Rail : Removing UNSV front rail and Supply & fix new front rail made out of teak wood as per existing shape and size complete all as specified in the drg and as directed by Engr in Charge.

Bracket : Supply and fix new bracket triangular shape of size 75 mm x 75 mm x 25 mm with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing table 3×3 complete all as shown on drawing and as directed by Engr-in-Charge.

Shoes : Taking out worn out/unserviceable shoes from legs and Supply & fix new shoes of hard PVC of superior quality with steel screw to the legs of the item complete all as specified and directed by Engr-in-Charge

Polishing:Material and labour for two coats of french polish after preparation of old/ new surface, complete all as specified & directed by Engr-in-Charge.

Table officer FD-84(M)

Top : Removing UNSV top and Supply & fix new top made out of 18 mm thick pre laminated MDF Board exterior grade complete all as specified in the drg and as directed by Engr in Charge.

Leg : Removing UNSV leg and Supply & fix new leg made out of teak wood as per existing shape and size complete all as specified in the drg and as directed by Engr in Charge.

Drawer : Removing old worn out drawer from the table and Supply & fix new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge .

Shutter : Removing old worn out shutter of the table and Supply & fix new shutter made out of 18 mm thick perlaminated MDF board specified in the drg and as directed by Engr in Charge .

Bracket : Supply and fix new bracket triangular shape of size 75 mm x 75 mm x 25 mm with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing table officer complete all as shown on drawing and as directed by Engr-in-Charge.

Bottom Stiffener Taking down old u/s Bottom stiffener and Material & labour for New bottom stiffener made out of teak wood duly polished to match the existing table complete all as specified in drg and as directed by Engr-in-Charge.

Shoes : Taking out worn out/unserviceable shoes from legs and Supply & fix new shoes of hard PVC of superior quality with steel screw to the legs of the item, complete all as specified and directed by Engr-in-Charge

Polishing: Material & labour for two coats of french polish after preparation of old / new surface, complete all as specified & directed by Engr-in-Charge.

Side Board FD-241, FD-371, FD/MAP/09

Top : Taking down old u/s Top and Material & labour for New Top made out of 18/19mm pre laminated MDF Board exterior grade Exterior grade, complete all as specified in drg and as directed by Engr-in-Charge.

Legs : Taking down old u/s Leg and Material & labour for New leg made out of teak wood complete all as specified in drg and as directed by Engr-in-Charge.

Long Rail : Taking down old u/s Long Rail and Material & labour for New Long Rail made out of teak wood complete all as specified in drg and as directed by Engr-in-Charge..

Short Rail : Taking down old u/s Short Rail and Material & labour for New Short Rail made out of teak wood all as specified in drg and as directed by Engr-in-Charge.

Shutter : - Removing old worn out shutter and supply & fixing new shutter made out of 18/19 mm Prelaminated Particle board exterior grade duly edging 5 mm thick teak wood beading after removing old UNSV edging complete all as specified and directed as per drg .

Drawer : Removing old worn out drawer from the table and supply & fix new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge .

Side LT/RT Taking down old u/s Side LT/RT and Material & labour for New Side LT/RT made out of 18/19mm pre laminated MDF Board exterior grade complete all as specified in drg and as directed by Engr-in-Charge.

Back :- Removing old worn out Back from the Side Board and supply & fix new Back made out of 6mm Plywood commercial BWR grade complete all as specified in the drg and as directed by Engr in Charge.

Knob : Taking out old worn out knob from the drawer of the table and Supply & fix new knob of best quality approved by GE/Engr-in-Charge complete all as specified or as directed by Engr in Charge.

Shoes : Taking out worn out/unserviceable shoes from legs and Supply & fix new shoes of hard PVC of superior quality with steel screw to the legs of the item complet all as specified and directed by Engr-in-Charge

Polishing: Material & labour for two coats of french polish after preparation of old/ new surface , complete all as specified & directed by Engr-in-Charge.

Bin Soiled Linen FD-244,15 (M) FD-212

Top : Removing old worn out top and supply & fix new top made out of 18/19 mm pre laminated MDF Board exterior grade duly edging 5 MM thick teak wood beading after removing old UNSV edging. complete as specified in drg and as directed by Engr-in-Charge.

Bottom : Removing old worn out bottom from bins, and Supply & fix new Bottom made out of second class, Hard wood, complete all as specified in drg and as directed by Engr - in -Charge.

Back : Removing old worn out back of the bins and supply & fix new back made out of 6 mm thick commercial plywood BWR Grade complete all as specified in drg and as directed by Engr - in -Charge.

Hinges : Taking down old u/s Hinges and Material & labour for New Hinges ISI Marked size 75mm, complete all as specified in drg and as directed by Engr-in-Charge

Polishing : Material & labour for with two coats of french polish after preparation of old / new surface , complete all as specified & directed by Engr-in-Charge.

Table Dressing Gents FD-230/31, 378

Mirror :- Removing of old/worn out U/S mirror and Material & labour for new mirror 5 mm thick glass ( Make : MODI GUARD/ATUL) as per size shown on drg & as directed.

Back ply of mirror : Removing UNSV back from the mirror and Supply & fix new back made out of 6 mm thick ply wood BWR grade complete all as specified in the drg and as directed by Engr in Charge.

Top : Removing UNSV top from the mirror and supply & fix new top made out of 18 mm thick pre laminated MDF Board exterior grade complete all as specified in the drg and as directed by Engr in Charge.

Bottom : Removing UNSV bottom from the mirror andsupply & fix new Bottom made out of 18 mm thick pre laminated MDF Board exterior grade complete all as specified in the drg and as directed by Engr in Charge.

Drawer : Removing old worn out drawer from the table and new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge .

Knob : Removing unservicable knob from the table and Supply & fix new CP knob 40mm to suit to the drawer complete all as specified in the drg and as directed by Engr in Charge.

Polishing: Material & labour for two coats of french polish after preparation of old / newsurface complete all as specified & directed by Engr-in-Charge.

Table Writing FD-249, FD-275,FD-33(M)

Top : Removing U/S top from the table and supply & fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete all as per specfication in drg and directed by Engr in Charge.

Legs : Removing U/S legs from the table and supply & fixing new legs made out of 2nd class HW complete all as per specfication and directed by Engr in Charge.

Long Rail : Removing U/S long rail from the table and supply & fixing new long rail made out of 2nd class HW, complete all as per specfication and directed by Engr in Charge.

Short Rail : Removing U/S short rail from the table and supply & fixing new short rail made out of 2nd class HW complete all as per specfication and directed by Engr in Charge.

Central Stiffener : Removing U/S stiffener from the table and supply & fixing new stiffener made out of 2nd class HW complete all as per specfication and directed by Engr in Charge.

Drawer : Removing U/S old broken drawer and Supply & fix new drawer ,made out of teak wood well seasoned complete all as shown on drawing as directed by Engr-in-Charge.

Store Box (Back) : Removing old u/s back side box and supply & fix new box (back) with 6mm thick (BWR) commercial ply complete all as specified and directed.

Store Box (Side) : Removing old u/s side box and supply & fix new box with 19mm thick block board teak veneer finish (One side) complete all as specified and directed.

Small legs : Removing U/S legs from the table and supply & fixing new legs made out of 2nd class HW complete all as per specfication and directed by Engr in Charge.

Shutter : Removing U/S shutter from the table and supply & fixing new shutter made out of 18/19 mm thick prelaminated particle board exterior grade duly edging with 5 mm teak wood beading all around the top complete all as per specfication in drg and directed by Engr in Charge.

Shoes : Removing old/worn out rubber shoes and Supply & fix new rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge

Polishing: Material and labour for two coats of french polish after preparation of old/ new surface complete all as specified & directed by Engr-in-Charge.

Bracket - Supply and fix new bracket triangular shape of size 75 mm x 75 mm x 25 mm with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing table complete all as shown on drawing and as directed by Engr-in-Charge.

Teapoy FD-34, FD-232 & FD-278 , 382

Top : Removing U/S top from the table and supply & fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete all as specfication in drg and directed by Engr in Charge

Long Rail : Removing U/S long rail and Supply & fix New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Short Rail : Removing U/S short rail and Supply & fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Stiffener : Removing U/S stiffener and Supply & fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Legs : Removing U/S Leg and Supply & fix New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Shoes : Taking out worn out/unserviceable shoes from legs and supply & fix new shoes of hard PVC of superior quality with steel screw to the legs of the item complete all as specified and directed by Engr-in-Charge

Polishing: Material and labour for two coats of french polish after preparation of old/ new surface complete all as specified & directed by Engr-in-Charge.

Bracket - Supply and fix new bracket triangular shape of size 75 mm x 75 mm x 25 mm with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Table complete all as shown on drawing and as directed by Engr-in-Charge.

Table centre FD235& FD-274

Top : Removing U/S top from the table and supply & fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete all as specfication in drg and directed by Engr in Charge

Long Rail : Removing U/S long rail and Supply & fix New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Short Rail : Removing U/S short rail and Supply & fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Stiffener : Removing U/S stiffener and Supply & fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Legs : Removing U/S Leg and Supply & fix New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Shoes : Taking out worn out/unserviceable shoes from legs Supply and fix new shoes of hard PVC of superior quality with steel screw to the legs of the item complete all as specified and directed by Engr-in-Charge

Polishing: Material and labour for two coats of french polish after preparation of old / new surface complete all as specified & directed by Engr-in-Charge.

Bracket - Supply and fix new bracket triangular shape of size 75mm×75mm×25mm with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing table complete all as shown on drawing and as directed by Engr-in-Charge.

Peg Table FD-226 & FD-384

Top : Removing U/S top from the table and supply & fixing new top made out of 18/19 mm thick prelaminated MFD board exterior grade duly edging with 5 mm teak wood beading all around the top complete. All as specfication in drg and directed by Engr in Charge

Long Rail : Removing U/S long rail and Supply & fix New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Short Rail : Removing U/S short rail and Supply and fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Stiffener : Removing U/S stiffener and Supply & fix New stiffener made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Legs : Removing U/S Leg and Supply & fix New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Shoes : Taking out worn out/unserviceable shoes from legs and Supply & fix new shoes of hard PVC ofo superior quality with steel screw to the legs of the item complete all as specified and directed by Engr-in-Charge

Polishing: Material and labour for two coats of french polish after preparation of old / new surface , complete all as specified & directed by Engr-in-Charge.

Bracket - Supply and fix new bracket triangular shape of size 75 mm x 75 mm x 25 mm with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing peg table complete all as shown on drawing and as directed by Engr-in-Charge.

Table dining 6 persons FD-273& FD-329 , MAP-03

Top : Removing U/S top from the table and supply & fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete all as specfication in drg and directed by Engr in Charge

Long Rail : Removing U/S long rail and Supply & fix New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Short Rail : Removing U/S short rail and Supply & fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Legs : Removing U/S Leg and Supply & fix New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Shoes : Taking out worn out/unserviceable shoes from legs and Supply & fix new shoes of hard PVC of superior quality with steel screw to the legs of the item complete all as specified and directed by Engr-in-Charge

Polishing: Material and labour with two coats of french polish after preparation of old/ new surface complete all as specified & directed by Engr-in-Charge.

Bracket - Supply and fix new bracket triangular shape of size 75 mm x 75 mm x 25 mm with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing table dining complete all as shown on drawing and as directed by Engr-in-Charge.

Table dining 8 perosns FD-273 & FD-329

Top : Removing U/S top from the table and supply & fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete all as specfication in drg and directed by Engr in Charge

Long Rail : Removing U/S long rail and Supply & fix New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Short Rail : Removing U/S short rail and Supply & fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Legs : Removing U/S Leg and Supply & fix New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Shoes : Taking out worn out/unserviceable shoes from legs and Supply & fix new shoes of hard PVC of superior quality with steel screw to the legs of the item complete all as specified and directed by Engr-in-Charge

Polishing: Material and labour two coats of french polish after preparation of old / new surface complete all as specified & directed by Engr-in-Charge.

Bracket - Supply and fix new bracket triangular shape of size 75 mm x 75 mm x 25 mm with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing table dining complete all as shown on drawing and as directed by Engr-in-Charge.

Table 3'X2' W/O Drawer FD-231& FD-284

Top : Removing U/S top from the table and supply & fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete all as specfication in drg and directed by Engr in Charge

Long Rail : Removing U/S long rail and Supply & fix New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Short Rail : Removing U/S short rail and Supply & fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Stiffener : Removing U/S Stiffener and Supply & fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Legs : Material and labour for removing U/S Leg and Supply & fix New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Shoes : Taking out worn out/unserviceable shoes from legs and Supply & fix new shoes of hard PVC of superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Polishing: Material and labour for two coats of french polish after preparation of old / new surface, complete all as specified & directed by Engr-in-Charge.

Bracket - Supply and fix new bracket triangular shape of size 75 mm x 75 mm x 25 mm with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing table complete all as shown on drawing and as directed by Engr-in-Charge.

Table 3'X2' With Drawer FD-231/ 223/283/284

Top : Removing U/S top from the table and supply & fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete all as specfication in drg and directed by Engr in Charge

Long Rail : Removing U/S long rail and Supply & fix New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Short Rail : Removing U/S short rail and Supply & fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Stiffener : Removing U/S stiffener and Supply & fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Legs : Removing U/S Leg and Supply & fix New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Shoes : Taking out worn out/unserviceable shoes from legs and Supply & fix new shoes of hard PVC of superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Drawer : Removing U/S old broken drawer and S/F new made out of 6mm plywood commercial BWR grade complete all as per specification given in the drawing and directed by Engr in Charge.

Polishing: Material and labour for two coats of french polish after preparation of old/new surface, complete all as specified & directed by Engr-in-Charge.

Bracket - Supply and fix new bracket triangular shape of size 75 mm x 75 mm x 25 mm with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing table 3'×2' with drawer complete all as shown on drawing and as directed by Engr-in-Charge.

Table dining 1200x 900 FD/MAP-II/03

Top : Removing U/S top from the table and supply & fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete all as specfication in drg and directed by Engr in Charge

Long Rail : Removing U/S long rail and Supply & fix New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Short Rail : Removing U/S short rail and Supply & fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Stiffener : Removing U/S stiffener and Supply & fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Legs : Removing U/S Leg and Supply & fix New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Shoes : Taking out worn out/unserviceable shoes from legs and Supply & fix new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Polishing: Material and labour two coats of french polish after preparation of old/ new surface complete all as specified & directed by Engr-in-Charge.

Bracket - Supply and fix new bracket triangular shape of size 75 mm x 75 mm x 25 mm with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing table dining 1200×900mm complete all as shown on drawing and as directed by Engr-in-Charge.

CHAIR EASY CUSHIONED (WOODEN) FD-271,FD-358

Removing of old broken seat with cushion and Supply & fix new seat of existing shape and size with 50mm thick Foam cushion 40 density covered with best quality tapestry cloth (not less than Rs 350/-) duly stitched and fixed with suitable adhesive over 12mm thick BWR plywood surface covered & screwed to track rail as directed by Engr-in-Charge.

Removing of old broken back with cushion and Supply & fix new back of existing shape and size with 50mm thick Foam cushion 40 density covered with best quality tapestry cloth (not less than Rs 350/-) duly stitched and fixed with suitable adhesive over 12mm thick BWR plywood surface covered & screwed to track rail as Drg & directed by Engr-in-Charge.

Material and labour for two coat of french polishing with high class finish complete as per drawing to match the existing and all as per directed by engr-in-charge.

Removing of old unserviceable arms rest and Supply and ix new arms rest of existing shape and size (65x25mm) made out of seasoned hard wood (Shisham) duly painted with synthetic enamel black paint and fixed with steel screws complete all as specified & directed

RE-CANNING OF VARIOUS TYPES OF FURNITURE

Material and labour for removing of old/broken/ unservisable plastic cane & re-canning of chair dinnig, chair CB without arms/chair writing,chairs CB with arms, chair CB office, chair easy FD/NF, chair, stool dressing CB, Couch set & bin solied linen with 2 to 2.5mm semi round cane plastic of white colour and border with 3 to 4mm semi round cane plastic of white colour complete all as specified and directed asper drawingss. The canning work shall be done in Godraj pattern. Cane should be in White colour (Non recycled) & make as approved.

NAVEEN TRADERS

L BHIMSEN

avtarsinghchaddha