Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.7 CrAccepted-AOC | ₹3.7 Cr | L1 | Accepted-AOC AWARDED |
| 2 | L2₹4.0 Cr+₹37.8 L (10.3%)Rejected-AOC | ₹4.0 Cr+₹37.8 L (10.3%) | L2 | Rejected-AOC REJECTED |
| 3 | L3₹4.3 Cr+₹67.1 L (18.3%)Rejected-AOC VILL BHOL PO MAKRAHAN TEHSIL JAWALI DISTT KANGRA HP | ₹4.3 Cr+₹67.1 L (18.3%) | L3 | Rejected-AOC REJECTED |
Tender Value
₹2.8 Cr
EMD Value
₹5.7 L
Closing Date
18 Nov 2021, 5:00 pmClosed
EXECUTIVE ENGINEER
HPPWD DIVISION INDORA
Construction of portion including approaches.
2021_PWD_53481_1
PWI/CB/II-C/TP/2021-5856-86 Dt 05-11-2021
Open Tender
Civil Works - Bridges
Item Rate
700 days
INDORA
Please refer Tender documents.
11 documents required · 11 mandatory
₹5,000
Yes
₹5.7 L
Yes
18 Feb 2022
12 Nov 2021
19 Nov 2021
12 Nov 2021
18 Nov 2021
12 Nov 2021
Amount
Earth work in excavation for all type of bridge structure in all type of classification of soil comprising for ordinary soil, ordinary rock,hard rock, Chieseling/ wedging out rocks (Where blasting is prohibbited) as per drawing and MORTH technical specification section 300( three hundred) and as per the direction of Engineer-in-Charge including setting out, shoring and bracing , removal of stumps and other deleterious materials and disposal of materials upto all lead and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm ( one hundred fifty millimeter) compacted thickness including shoring and strutting and pumping and bailing out water (Surface and sub soil water) upto any depth any quantam of water including cleaning of slush which may arrise out during dewatering as directed by the Engineer-in-Charge Including carriage of materials within all leads lifts and other incidental .The rate is including octroi , Royality , Malkana , Toll Tax , GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated concrete for plain/ reinforced Cement concrete in open foundation for all type of structure complete of plain cement concrete grade M-10 (M-Ten) nominal mix 1: 3: 6 ( One cement : three sand : six graded crushed stone aggregate 40mm ( forty millimeter nominal size) on ground or under water and curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arrise at the time of laying concrete complete for all heights / depths including the cost of form work complete in all respect as per drawing and MORTH technical specification section 1500,1700and 2100 as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated Plain/reinforced cement concrete in Sub structure as per drawing and MORTH technical specification section 1500, 1700, 2200 RCC Grade M-25 (M- twenty five) designed mix with cement contents not less than 399 kg. (Three hundred Ninety Nine ) Kilogramme per cubic meter with 40mm (Forty millimeter) nominal size graded crushed stone aggregate and curing complete including cost of form work in abutment etcetra complete as per the direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated plain cement concrete design mix to obtain the minimum compressive strength of grade M-15 (M-Fifteen) with cement content not less than 275 kg (Two hundred Seventy Five ) Kilogramme per cubic meter in levelling course below approach slab and curing complete as per drawing and technical specification section 1700 and 2700 including cost of form work complete including carriage of materials within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated reinforced cement concrete in Sub structure complete as per drawing and MORTH technical specification section 1500, 1700, 2200 RCC Grade M-30 (M- thirty) designed mix with cement contents not less than 407 kg. (Four hundred seven) Kilogramme per cubic meter including curing complete using crushed stone aggregate 20mm (Twenty millimeter) nominal size including form work but excluding the cost of reinforcement in bed block and dirt wall etcetra as per the direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Supplying fitting and placing HYSD bar reinforcement for bridge work in Sub structure complete as per drawing and MORTH technical specifications section 1600, 2200 including cutting, bending, binding strenghthning and placing in position complete in all respect including cost of binding wire upto any depth and height as per the direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is including of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and Laying mechanically mixed and vibrated reinforced cement concrete in super structure complete as per drawing and MORTH technical specification 1500, 1700 and 2300 with M-30 (M-Thirty) grade design mix using crushed stone aggregate 20 mm (Twenty Milimeters) nominal size with cement contents not less than 407 kg (Four hundred Seven) kilogramme as per cubic meter including curing complete including the cost of form work but excluding reinforcement in deck slab and wheel guard etcetra complete as per the direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Supplying fitting and placing HYSD bar reinforcement in super structure complete as per drawing and MORTH technical specifications section 1600, 2300 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire as per the direction of Engineer-in-charge including carriage of material with in all leads, lifts and other incidental. The rate is including of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated reinforcement concrete grade M-30 (M-thirty) mix design having cement contents not less than 407kg (Four hundred seven) Kilograme per cubic meter with 20 mm (twenty milimeters) nominal size crushed stone aggregate and curing complete in wearing coat including cost of form work and reinforcement as per drawing and MORTH technical specification section 1500,1600,1700 and 2700 as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rates is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing M.S drainage spouts complete with 100mm ( one hundred millimeter) dia galvanised mild steel down pipe corrosion resistant structural steel grating complete as per drawing and MORTH technical specification section 2700 and as per the direction of Engineer-in- Charge including carriage of materials within all leads , lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government
Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-30 (M-thirty) design mix with cement contents not less than 407 kg (four hundred seven) kilograme per cubic meter with 20mm (Twenty milimeters) nominal size aggregate and curing complete in approach slab including the cost of form work and reinforcement complete as per drawings and MORTH technical specification section 1500,1600,1700 and 2700, including carriage of materials within all leads, lifts and other incidental as per the direction of Engineer-in-Charge. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing in position 20mm (Twenty millimeter) thick compressible fibre board in expansion joint complete as per drawing and MORTH technical specifications section 2600 or as per direction and entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, Toll Tax, GST or other Taxes imposed by the Government.
Providing and laying expansion joint catering maximum horizontal movement upto 40 mm (Forty milimeter)complete as per approved drawing No. PW-CE-N-Bridge (standard) 90/107-2-R1 and MORTH technical specification section 2600 or as per direction and entire satisfection of the Engineer-in-Charge including carriage of materials within all leads , lifts and other incidental . The rates is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and filling joint sealing compound as per drawing and technical specifications with coarse sand and 6% (six percent) bitumen by weight as per MORTH technical specification section 2600 and as per direction of the Engineer- in charge including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.
Providing weep holes in brick masonry, plain/reinforced concrete abutment, wing wall, return wall with 100mm ( One Hundred millimeter) diameters AC pipe extending through the full width of the structure with slope of 1(V): 20(H)(one vertical: twenty horizontal) towards drainage face complete as per drawing and MORTH technical specifications section 2700 including carriage of materials within all leads, lifts and other incidental as per approved drawing design and as directed by the Engineer-in-Charge. The rate is including octroi , Royality , Malkana , Toll Tax , GST or any other taxes imposed by the Government.
Back filling with granular materials behind abutment, wing wall and return wall complete as per drawings & MORTH technical specification section 2200 and Clauses 710.1.4 of IRC 78 and as per entire satisfaction/ direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Supplying, fitting and fixing in position true to line and level cast steel rocker bearing, conforming to IRC:83 (Pt.-1) section IX and section 2000 of MORTH technical specifications complete including all accessories as per drawing and technical specifications, including hauling of materials with in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rates is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Supplying, fitting and fixing in position true to line and level forged steel roller bearing, conforming to IRC:83 (Pt.-1) section IX and section 2000 of MORTH technical specifications complete including all accessories as per drawing and technical specifications, including hauling of materials with in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rates is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Construction of precast reinforced cement concrete railing of cement concrete grade M-30 (M-thirty) design mix with minimum cement contents not less than 407 kg (four hundred seven) kilograme per cubic meter with aggregate size not exceeding 12mm (twelve milimeters) true to line and grade tollerence of vertical reinforcement cement concrete post not to exceed 1 in 500 ( one in five hundred) centre to centre spacing between vertical post not to exceed 2000mm ( two thousand millimeter) leaving adequate space between vertical post for expansion, complete as per drawing and MORTH technical specification section 1500,1600,1700 and 2700 including the cost of reinforcement and form work and curing complete as per direction of Engineer-in-Charge including carraige of materials within all leads , lifts and other incidential. The rates is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Provision and laying Reinforced Cement Concrete crash barrier at the edges of the road approaches to bridge structure and medians constructed with M-40 (M-Forty) grade concrete with HYSD reinforcement conforming to IRC-112 and dowel bars 25mm (Twenty Five millimeters) dia, 450 mm (four Hundred Fifty millimeters) long at expainsion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to most circular No. RW/NH-33022/1/94-DO III dated 24 june 1994 as per dimensions in the approved drawing and at locations direct by the Engineer, all as specified as per drawing and MORTH technical specifications section 800 or as directed by the Engineer-in-Charge including carraige of material within all leads, lift and other incidental. The rates is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Earthwork in excavation for all type of roads structure such as retaining walls, breast walls, culverts, drain and parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock,hard rock chieseling/wedging out of rock (where blasting is prohibbited) as per drawing and MORD technical specifications section 300 and 1600 including setting out ,shoring and bracing, removal of stumps and other deleterious material and disposal of materials upto any lead and lift, including dressing of sides and bottom and backfilling in trenches with excavated suitable approved material to the original surfaces in layer not exceeding 150 mm (One hundred Fifty milimeters) compacted thickness including shoring and strutting and pumping and bailing out of water (surface and sub soil water) upto any depth and any quantam of water including cleaning of slush which may arrise out during dewatering as directed by the Engineer-in Charge including carriage of material within all leads, lifts and other incidentals.The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated plain cement concrete in Retaining wall for all type of structure complete of nominal mix 1:4:8 (One cement : four sand : Eight graded crushed/broken stone aggregate 40mm (Forty millimeter) nominal size including curing complete and pumping or bailing out of water,dewatering,removal of slush as required at site which may arise at the time of laying concrete complete for all heights/depths including the cost of form work complete in all respect as per drawing and M.O.R.D technical specification section 800, 900, 1200 and 1600 as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is including Octroi , Royality , Malkana , Toll Tax , GST or any other taxes imposed by the Government.
Back filling with granular materials behind abutment, wing wall and return wall complete as per drawings & MORD technical specification section 1200 and 1600 and as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Construction of embankment for roadway with approved material obtained from borrow pits and laid in layers of suitable thickness not exceeding 200mm ( two hundred millimetres) spreading to required slope and compacted with three wheel 80-100 (Eighty to One Hundred) kN static/ vibratory road roller to meet the requirements of table 300.1 and 300.2 of MORD specifications to lines, grades, level and cross sections as per drawings or directions of the Engineer-in-charge including preparation of foundation for embankment in all kinds and classification of soils including saturated soil and dewatering/ bailing out of water wherever required as per direction of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate is includes octroi, royalty, Malkana, toll tax, GST or other taxes imposed by the Government.
Construction of embankment with approved material deposited at site obtained from roadway cutting and excavation from drain and foundation of all other structures graded and compacted to meet requirement of table 300.1 and 300.2 as per technical specification clause 301.5. The rate shall include carriage of machineries, equipment, tools and materials and safety measures, payment of all taxes and other incidentals necessary to complete the work in all respects as per direction of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate is includes octroi, royalty, Malkana, toll tax, GST, labour cess or other taxes imposed by the Government.
Providing and laying 100mm dia ( One Hundred millimeter) diameter P.V.C. pipe weep holes in brick masonry/ stone masonry, plain/reinforced concrete abutment, wing wall, return wall and retaining/breast walls through the full width of the structures with slope of 1(V): 20(H)(one vertical: twenty horizontal) towards drainage face complete as per drawing and M.O.R.D. technical specifications section 700 and 1200 as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi , Royality , Malkana , Toll Tax , GST or any other taxes imposed by the Government.
Construction of granular sub base 150mm ( One hundred Fifty milimeter) compacted thickness by providing well graded materials as per table 400.1 spreading in uniform layer with motor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with three wheel 80-100 ( eighty-hundred) K.N static roller to achieve the desired density complete as per MORD technical specification section 400 for grading-I material and as per the entire satisfaction and direction of Engineer in -Charge including carraige of material within all leads, lifts and other incidental.The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing ,laying, spreading and compacting by mechanical means graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/ base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100KN (Eighty to one hundred kilo newton) weight to achieve the desired density including lighting barricading and maintenance of diversion etcetra as per tables 400.11 & 400.12 and MORD technical specification section 400 including carriage of material with in all leads and lifts and other incidentals .The rate is includes octori, royality,malkhana ,toll tax,GST, or other taxes imposed by the Government.
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer with bitumen emulsion pressure distributer at the rate of 0.85 kg (zero point eighty five kilogram) per square metre using mechanical means as per MORD technical specification section 500 and as per direction of Engineer-in-charge including carriage of material with in all leads and lifts and other incidentals .The rate is includes octori, royality,malkana ,toll tax,GST,l or other taxes imposed by the Government..
Providing and applying tack coat with bitumen emulsion (RS-I) using emulsion pressure distributor at the rate of 0.275 kg.per sqm (Zero point two hundred seventy five kilogram) per square metre.on the prepared granular surfaces treated with primer and cleaned with Hydraulic broom as per MORD technical specification section 500 including carriage of material with in all leads and lifts and other incidentals .The rate includes octori, royality,malkana ,toll tax,GST, or other taxes imposed by the Government..
Providing laying and rolling of open graded premix carpet of 20mm ( twenty millimetre) compacted thickness composed of 13.2mm ( thirteen decimal two millimetre) to 5.6mm ( five decimal six millimetre) size aggregate for wearing coarse including loading of aggregate with front end loader heating binder and aggregate in hot mix plant 30/40 (Thirty / Forty) Tonne per hour capacity transporting mixed material with tipper to site of work and laying with paver finisher to the required grade and camber rolling with power road roller 8/10 (Eight/Ten) tonne using 0.27 cum (zero point two seven cubic metre) of graded stone aggregate mixed with 14.60 kg.(Fourteen point Sixty Kilogramme) of bitumen binder using VG-10 (Viscosity grade-ten) per ten square metre of road surface to required line grade and level to but excluding the cost of tack coat and seal coat inclusive of all corrective measures such as laying of profile corrective coarse of all depth filling of depression for all depth and construction of super elevation and camber, where required as per MORD technical specification section 500 by mechanical means or as directed by the Engineer – in- Charge including carriage of material with in all leads and lifts and other incidentals .The rate is including of octori, royality,malkana ,toll tax,GST or other taxes imposed by the Government.
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels ,grade and cross fall using type B at the rate of 6.8 kg (six point eight kilogram) premixed with 0.06 cum (zero decimal zero six cubic metre) of fine aggregate spread uniformally per ten square metre including heated in mini hot mix plant and laying of mixed material and rolling with power road roller 80-100 (Eighty-Hundred) KN static road roller as per MORD technical specification section 500 and as per the direction of Engineer – in- Charge including carriage of material with in all leads and lifts and other incidentals .The rate is including octori, royality, malkana ,toll tax,GST or other taxes imposed by the Government.
ANIL MAHAJAN
rajat thakur govt contractor
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .