Development of fulnath Mahadev Temple Premises work,Ta– Jamjodhpur, Dist. Jamnagar.

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling and trees girth up to

1 3,064.10 Sqmt. 11.50 Rupees Eleven and Fifty Paise

mm removal of stumps of trees cut earlier and disposal of unserviceable materials (B) By manual in area of thorny jungle

Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling and trees girth up to

2 1,898.50 mm removal of stumps of trees cut earlier and disposal of unserviceable materials (C) By mechanical means in area of light Sqmt. 3.49 Rupees Three and Forty Eight Paise

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable Rupees Five Hundred Seventy Six

materials with all lead and lift. (ii) In Cement Mortar and Twenty Nine Paise

4 384.50 Demolition and disposal of unserviceable materials with all lead and lift.(i) Lime concrete. cu.m 637.86 Rupees Six Hundred Thirty Seven

5 1,000.00 Dismentling steel work including distempering and stacking the materials with all lead and lift. Kg 3.94 Rupees Three and Ninety Three

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, hold fasts and other Rupees One Hundred Ninety Six

attachment etc. complete and stacking them within all lead and lift.(i) Not exceeding 3 Sq.M. in area. and Sixty Five Paise

Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) R.C.C. Rupees One Thousand One

work Hundred Eight and Twelve Paise

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable Rupees Fifty and Twenty Seven

materials with all lead and lift. Paise

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, hold fasts and other Rupees Two Hundred Sixty Three

attachment etc. complete and stacking them within all lead and lift.(ii) Exceeding 3 Sq.M. in area. and Thirty Four Paise

Filling of Earth work including compacted of earth with not less than 95 %(refer MoRTH 300-2) including breaking clods,

dressing with all lead and lift and including watering, rolling and consolidation of subgrade in layers at O.M.C. to required Rupees Two Hundred Sixty and

dry density, including filling the depressing, which occurs during the process using power roller of 8 ton to 10 ton all as per Fifty Four Paise

specification. From borrow area any

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off Rupees Two Hundred Seventy

the excavated stuff upto 50 Meter lead. (C) Hard Murrum Three and Forty Four Paise

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials Rupees Two Hundred Ninety Four

and disposing off the excavated stuff upto 50 Meter lead. (C) Hard Murrum and Five Paise

Excavation in hard rock by dry-wet blasting and chiselling including dewatering preparing foundation base by proper Rupees Eight Hundred Eighty Two

benching and stepping and disposing of the excavated stuff as directed.(A) General blasting and Thirty Eight Paise

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not Rupees One Hundred Thirty Seven

exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering. and Forty Seven Paise

Rupees Four Hundred Eighty Nine

15 122.00 Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete cu.m 489.28

and Twenty Eight Paise

Providing and laying cement concrete 1:2:4 (1-Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) Rupees Three Thousand Eight

and curing complete Including cost of formwork in (A) Foundation and Plinth Hundred Three and Six Paise

Providing and laying controlled cement concrete M.250 and curing complete Including the cost of formwork but excluding Rupees Five Thousand Five

17 83.60 cost of reinforcement for reinforced concrete work in n (B) Walls, from top of foundation level upto floor two level - cu.m 5,544.31 Hundred Forty Four and Thirty One

Retaining Wall upto Plinth Level Paise

Providing and laying controlled cement concrete M.250 and curing complete Including the cost of formwork but excluding Rupees Four Thousand Nine

18 283.50 cost of reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete.. - cu.m 4,987.38 Hundred Eighty Seven and Thirty

Foundation Work Seven Paise

Providing and laying controlled cement concrete M.250 and curing complete Including the cost of formwork but excluding Rupees Eight Thousand Five

cost of reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts (i) upto Plinth Level Hundred Thirty One and One Paisa

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Rupees Seven Thousand Six

Providing and laying controlled cement concrete M.250 and curing complete Including the cost of formwork but excluding

20 15.40 cu.m 7,652.45 Hundred Fifty Two and Forty Five

cost of reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts, (ii) upto floor two level.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork but excluding Rupees Six Thousand Seven

21 24.00 the cost of reinforcement for reinforced concrete work in (C) Slabs, landing, shelves, Balconies Lintels, Beams, Girders and cu.m 6,735.28 Hundred Thirty Five and Twenty

Cantilever upto floor two level - Plinth Beam Seven Paise

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork but excluding Rupees Six Thousand Seven

22 10.40 the cost of reinforcement for reinforced concrete work in (C) Slabs, landing, shelves, Balconies Lintels, Beams, Girders and cu.m 6,777.49 Hundred Seventy Seven and Forty

Cantilever upto floor two level - Beam Nine Paise

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork but excluding

Rupees Six Thousand Seventy Six

23 1.40 the cost of reinforcement for reinforced concrete work in (C) Slabs, landing, shelves, Balconies Lintels, Beams, Girders and cu.m 6,076.35

and Thirty Five Paise

Cantilever upto floor two level - Lintle & Sill

Providing and laying controlled cement concrete M.200 and curing complete Including the cost of formwork but excluding

Rupees Six Thousand Four Hundred

24 17.50 the cost of reinforcement for reinforced concrete work in (C) Slabs, landing, shelves, Balconies Lintels, Beams, Girders and cu.m 6,435.50

Thirty Five and Forty Nine Paise

Cantilever upto floor two level - Slab

Providing and laying cement concrete 1:2:4 (1- Cement :2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) for

reinforced concrete Chhajjas not exceeding 10cm. thickness upto floor two level including finishing the exposed surfaces Rupees Six Thousand Six Hundred

with cement mortar 1:3 (1- cement, 3 Fine sand) to give a smooth and even surface centering and formwork and curing Ninety One and Five Paise

complete excluding cost of reinforcement.

Providing and laying controlled cement concrete M.150 for curing complete excluding cost of formwork and reinforcement Rupees Four Thousand Twenty Five

for reinforced concrete work in (A) Foundations, footings,Base of columns and Mass concrete - Grade Slab and Seventy Five Paise

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, binding and placing in position complete Rupees Seventy Seven and Twenty

upto floor two level (upto 10 ton) Eight Paise

Rupees Three Thousand Six

Coursed rubble masonry with stone of approved quality in foundations and plinth in Cement Mortar 1:4 (1-Cement : 4-

28 43.50 cu.m 3,634.15 Hundred Thirty Four and Fifteen

coarse sand) etc. complete. Below Plinth

White Stone Bela mesonry block in course in superstructure with stone of approved quality in Lime Mortar 1:5 (1-Cement :5- Rupees Six Thousand Six Hundred

course sand) including packing the joints etc. complete. Above Plinth Nine and Twenty Six Paise

Rupees Six Hundred Ninety Six and

30 97.50 White Stone Bela mesonry work in partition walls upto 15 cm thickness in cement Mortar 1:4 ( 1- Cement : 4- course sand) Sqmt. 696.51

Providing 15mm thick cement plaster in single coat on Rough (Similar) side of single or half brick walls for interior plastering Rupees One Hundred Sixty Four

upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement : 4-sand) and Sixty Nine Paise

Providing and applying 25mm thick texture plaster with finishing with Purlina / Rustic texture material providing

coats of 10 mm thick cement plaster in single coat on rough (similar) side of single or half brick walls for interior plastering

Rupees One Thousand One

upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) with extra over for finishing

32 1,858.60 Sqmt. 1,124.27 Hundred Twenty Four and Twenty

with a floating coat of neat cement slurry and (A) for providing and mixing water proofing materials in cement mortar in

proportion recommended by the manufacturer. Providing and supplying final coat of heritage plaster as directed by site

incharge and approved by architect.

33 38.70 Providing & laying throating or plaster drip and moulding to R.C.C. chhajja Rmt 44.07 Rupees Forty Four and Six Paise

Providing & Fixing the Chikenmesh - 20 guage(Crimp Jali) of approved size applying between the RCC and masonry junction

Rupees Two Hundred Thirty Five

34 233.20 in proper line, level and plumb with all material, labour, tools, tackles and equipment. Including providing and fixing the jali Rmt 235.85

and Eighty Four Paise

with nails, etc complete

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Providing and laying Flamed finish Light grey / Cera grey Granite stone flooring / Coping in required size, design and

patterns, in linear as well as curvilinear portions all complete as per the architectural drawings with 30 mm thick stone slab

over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 Coarse sand), portions butt jointed or with 5-8 mm gap

as per design and drawing in 1:2 (cement : fine sand) and pointing full depth (flushed) or struck pointed as per design and Rupees Two Thousand Six Hundred

drawing with white cement slurry admixed with pigment of matching shade including rubbing, pointing, curing, polishing, Fifty Seven and Nine Paise

moulding/ champhering at edges and final scrubbing using mechanical/ manual means to achieve clean surface etc. all

complete as specified and as directed by the Engineer-in-Charge. Including Minimum 2 mockups for approval, complete for

finished item of work. Wax polishing is strictly not allowed. (B) 30 mm thick

Providing and laying Riverwash Red and Brown mandana Sand stone flooring / Coping in required size, design and patterns,

in linear as well as curvilinear portions all complete as per the architectural drawings with 30 mm thick stone slab over

mm (average) thick base of cement mortar 1:4 (1 cement : 4 Coarse sand), portions butt jointed or with 5-8 mm gap as per

Rupees Two Thousand Five

design and drawing in 1:2 (cement : fine sand) and pointing full depth (flushed) or struck pointed as per design and drawing

36 405.00 Sqmt. 2,517.71 Hundred Seventeen and Seventy

with white cement slurry admixed with pigment of matching shade including rubbing, pointing, curing, polishing, moulding/

champhering at edges and final scrubbing using mechanical/ manual means to achieve clean surface etc. all complete as

specified and as directed by the Engineer-in-Charge. Including Minimum 2 mockups for approval, complete for finished item

of work. Wax polishing is strictly not allowed. (B) 30 mm thick

Providing and fixing Eliptical Pebble stones of size between 30mm to 100mm of Black & Grey & White colors as approved by

Rupees Twelve Thousand One

37 69.90 Landscape Architect, in approved pattern, laid on 20mm thick Cement mortar bed of proportion 1:6 as directed by EIC. Cum 12,120.00

Hundred Twenty Only

Including Supply and spreading complete.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6- Rupees One Thousand Five

38 145.60 coarse sand) In combination with laid over and jointed 100mm Rough Granite Strips at 4m interval grey cement slurry mixed Sqmt. 1,586.71 Hundred Eighty Six and Seventy

with pigment to match the shade of slab including rubbing and semi mirror polishing etc. complete. (A) 25mm thick One Paise

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) Rupees One Thousand Four

39 123.50 on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with Sqmt. 1,472.91 Hundred Seventy Two and Ninety

color cement slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit One Paise

Providing and laying 18 mm thick polished granite stone machine cut in single piece (Max. available) in sill and jambs of

Rupees Two Thousand Six Hundred

Door, window, Ventilation frame and also risers of steps,trade, dedo laid over 10 mm thick cement mortar 1 : 3 (1 cement :

40 47.20 Sqmt 2,623.77 Twenty Three and Seventy Seven

coarse sand) and jointed with grey cement slurry with matching pigment including rubbing and polishing half rounding edge

including fastning of hilty anchor if require etc. complete colour and shed as approved by architect engineer in charge.

Providing and laying polished Mandana Stone stone slab 18mm thick in risers of steps,skirting Dedo and pillars laid on 10mm Rupees One Thousand Five

41 2,324.60 thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the Sqmt. 1,585.45 Hundred Eighty Five and Forty Four

shade of slab including rubbing and polishing etc. complete. Paise

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of steps and dedo on 10mm thick cement Rupees One Thousand One

plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry Hundred Ninety Five and Two Paise

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of concrete M300

pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 mm Rupees Seven Hundred Seven and

Sand layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Fifty Four Paise

Providing and fixing Kadappa kerb stone of 30cm length,30cm height and 15cm thick on M250 grade concret as per

Rupees Six Hundred Fifty Six and

44 116.00 approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine Rmt 656.50

sand) etc complete. with Lead for Trek

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Providing and laying of Solid Concrete Cobble Square, in Shotblasted finish, colours specified by the architects, using UV

Rupees One Thousand Four

45 625.00 resistant colour pigments from Lanxess, wear resistant colour coordinated aggregates, water and oil repellence, reduction of Sqmt 1,400.13

Hundred and Twelve Paise

algae, moss and efflorescence formation. Size 97*97*80 mm thick. Nominal size of 100mm *100mm.

Stone Cladding Work 35mm Carved Dholpur Sand Stone on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and

jointed with gray cement slury mixed with pigment to match the shade of slab including All lead and lift up to 2 floors, Rupees Four Thousand Two

46 1,456.60 additional fixitive chemical of approved make to be added to mortar. etc. complete including cutting as per provided design. Sqmt. 4,228.91 Hundred Twenty Eight and Ninety

Use of Stone adhesives to retain water for self-curing and have high bonding strength, allowing the natural stones to directly Paise

fix to the substrate. Bonding Chemical of External grade approved by EIC, PMC. - Colour to be approved by architect.

Supply and fixing at site of work carved fine ornamental grill from HERITAGE STYLE chisel dressed ornamental

BANSIPAHADPUR GOOD QUIALITY STONE in required size for temple work in 1:3 cement sand mortar and jointed in white

cement to match the colour of the stone. Joints of stone to be not more than 1/8 inches and depth up to stone size, all

visible angles and edges to be straight and free from chipping work shall be strictly in plumb line and level including Rupees Twelve Thousand Six

providing doweling and jointed by copper metal clamps of suitable size and design including all scaffolding and lead and lift. Hundred Twenty Five Only

Work to be carried out as per approved Drawing -Carving up to 10mm - stone thickness not less than 50 . Providing Vertical

Supports from 60mm X 60mm Stone of same quality and erecting it at the distance provided in drawing. complete as

directed by site incharge

Supply and fixing at site of work carved carved fine upto 8mm depth HERITAGE STYLE chisel dressed ornamental

BANSIPAHADPUR GOOD QUIALITY STONE in required size for temple work in 1:3 cement sand mortar and jointed in white

cement to match the colour of the stone. Joints of stone to be not more than 1/8 inches and depth up to stone size, all Rupees Seventy Seven Thousand

48 93.60 visible angles and edges to be straight and free from chipping work shall be strictly in plumb line and level including Cum 77,704.53 Seven Hundred Four and Fifty Two

providing doweling and jointed by copper metal damps of suitable size and as per drawing and design including all Paise

scaffolding and lead and lift. Work to be carried out as per approved Drawing which is displayed in full scale at Temple site

Supply and fixing at site of work carved carved fine upto 8mm depth HERITAGE STYLE chisel dressed ornamental

BANSIPAHADPUR GOOD QUIALITY STONE in required size for temple work in 1:3 cement sand mortar and jointed in white

cement to match the colour of the stone. Joints of stone to be not more than 1/8 inches and depth up to stone size, all Rupees Sixty Seven Thousand Nine

49 4.40 visible angles and edges to be straight and free from chipping work shall be strictly in plumb line and level including Cum 67,970.32 Hundred Seventy and Thirty Two

providing doweling and jointed by copper metal damps of suitable size and as per drawing and design including all Paise

scaffolding and lead and lift. Work to be carried out as per approved Drawing which is displayed in full scale at Temple site

Supply and fixing at site of work carved carved fine upto 8mm depth HERITAGE STYLE chisel dressed ornamental

BANSIPAHADPUR GOOD QUIALITY STONE in required size for temple work in 1:3 cement sand mortar and jointed in white

cement to match the colour of the stone. Joints of stone to be not more than 1/8 inches and depth up to stone size, all

Rupees Seventy Three Thousand Six

50 7.80 visible angles and edges to be straight and free from chipping work shall be strictly in plumb line and level including Cum 73,620.05

Hundred Twenty and Four Paise

providing doweling and jointed by copper metal damps of suitable size and as per drawing and design including all

scaffolding and lead and lift. Work to be carried out as per approved Drawing which is displayed in full scale at Temple site

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Designing ,Supply and Installing of Cladding material for Columns, Arch (Toran), Bam, Exterior Cornise, - made of - GRC / FRP

having Height and thickness as per schematic drawings, including Designing, Submitting shop drawing and two mock ups

Rupees Eleven Thousand Four

and getting it approved by EIC/Architet/PMC.The cost also includes hand crafting and installation of Components in Group

51 121.40 Sqmt 11,440.78 Hundred Forty and Seventy Seven

as per size. The Design has to be hand crafted by expert artisans giving all shapes, expressions, polishing and color as

approved by EIC/Architect. Lifting, Placement and Fixing with all required civil work, welding DG set, tools,etc at the site as

per requirement directed by EIC

Designing ,Supply and Installing of Cladding material for Existing Stone Temple Kangra - made of - GRC / FRP having Height

and thickness as per schematic drawings, including Designing, Submitting shop drawing and two mock ups and getting it

approved by EIC/Architet/PMC.The cost also includes hand crafting and installation of Components in Group as per size. Rupees Ten Thousand Six Hundred

The Design has to be hand crafted by expert artisans and that to match existing style and pattern, giving all shapes, Ninety and Eighty Five Paise

expressions, polishing and color as approved by EIC/Architect. Lifting, Placement and Fixing with all required civil work,

welding DG set, tools,etc at the site as per requirement directed by EIC

Mural Design : Design, develop, supply ,installation of mural with size

10ft.*8ft. ,featuring the ancient story or culture of Harsiddhimata can be created using FRP with a require steel structure.

The mural's design will showcase intricate details and vibrant colors, with a finish that enhances its visual appeal. The actual

detail work will include hand-painted or coated colors to bring out the story's essence. Civil work will involve RCC foundation

Rupees Seven Thousand Seventy

53 714.00 and pillars to support the structure, ensuring stability and durability. The steel framework will be treated for corrosion Sqmt 7,070.00

resistance, and the FRP material will be molded to depict the story's intricate scenes. The mural's base color will be chosen

to blend with the surroundings, while the story's elements will be depicted in vivid colors. The RCC work will be designed to

withstand environmental conditions, and the steel structure will be fabricated to support the mural's design and weight. The

final finish will be a durable coat to protect the mural from the elements.

Sculpture Design : A 10 FT. sculpture of Lord Shiva standing /sitting can

be created using FRP with a steel structure. The sculpture will feature intricate details, with actual detail work including hand-

painted or coated colors to capture the vibrant essence of Garba. The steel framework will provide support and stability,

Rupees Twelve Lac Twelve

54 1.00 while the FRP material will be molded to depict the dynamic pose of the sculpture . Civil work will involve RCC foundation to Nos 12,12,000.00

ensure the structure's stability and durability. The finish will include a durable coat to protect the sculpture from the

elements. Colors will be chosen to reflect the traditional and cultural significance . The RCC work will be designed to

withstand environmental conditions, and the steel structure will be fabricated to support the sculpture's design and weight.

55 3,700.00 Supply of Standard Cast Iron Fabrication with Detail as per Architecture details kg 214.52 Rupees Two Hundred Fourteen and

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Metal Work - Providing, fabricating, assembling, hoisting/ erecting and fixing in position at all heights/ all levels/ all floors/ all shapes &

sizes with all leads & lifts using Hot dip Galvanised with min. 140 micron thk after sand blasting over MS Rolled Steel Sections, Hollow

sections, Tubular Sections, MS Plates, Chequered Plates, MS Pipes, Perforated Sheet, Flats, Bright Bars, Angles, MS Sheet, Girder,

Beam, cattle trap. deep threaded MS bolts, threaded J bolts, insert plate, support plate etc as per drawing. all confirming to latest

relevant IS codes for the work of steel structures like gratings over drain channel, I beams, staircases, railings, handrail, jali, gates,

grills, bracings, platforms, brackets, monkey ladder, cattle trap, windows, pipe rack, rungs, false ceiling frame work, Roof canopy,

fencing posts, M.S. Screen & fencing jali frame work etc. including straightening, cutting, bending, bolting and welding the members all

as per structural drawings and as per detailed specifications (for materials & workmanship) including necessary scaffolding/ staging etc.

complete in the situations described hereinafter and comprising of : i) Profile Cutting of components to required length/ width and

shape/ profile; ii) Smooth grinding/ machining of edges/ faces/ all welding joints; iii) Necessary welding (electric arc welding) for

required weld lengths and sizes. iv) Machine drilling of holes for joining/ anchoring (Standard measurements will be paid for as actual

cut length used at site). The rate shall include dry sandblasting, degreasing & preparation of rustfree surface manually or mechanically,

applying chemical pre-treatment to the prepared surface to improve adhesion of subsequent coat, 2 coat of Epoxy paint (total min

micron thick) and 1 coat of PU Paint (min 60 micron thick) of approved shade of paint over all the surfaces of the steel sections or as

56 17,648.50 specified in the drawing. Note: The contractor shall submit fabrication drawings based on construction drawings (that may be issued Kg 91.08 Rupees Ninety One and Eight Paise

during construction period with at least one mock up approved by architecture ) for approval by the Architect/ Engineer. The

fabrication work shall start only after approval of the fabrication drawings submitted by contractor. Any change required in the

fabrication drawings shall be carried out at No extra cost. Fabrication shall be in a perfect architectural workmanship manner and as

provided in section V & VI of IS 800 & IS 7215. Welding shall be carried out by qualified welders/ fabricators. It should also include the

cost of necessary scaffolding/ staging, zinc coated nut-bolt as required for safety, structural stability of all works at site. Any change

required in the fabrication drawings shall be carried out at No extra cost. Fabrication shall be in a perfect architectural workmanship

manner and as provided in section V & VI of IS 800 & IS 7215. Welding shall be carried out by qualified welders/ fabricators. The

procedure, selection, test and inspection shall confirm to provisions in IS 816, IS 818, IS 822, & IS 823. Erection/ hoisting shall

commence only after passing of fabricated parts by Architect/ Engineer. Rate shall be inclusive of cutting, wastage, welding, bending

(shop at site/factory), bolting wherever necessary, in position welding of required length, grinding, finishing edges, filling & finishing the

welded spots & gaps with grout/ sealent/ applying chemical pre-treatment to the prepared surface to improve adhesion of subsequent

coat, 2 coat of Epoxy paint (total min 100 micron thick) and 1 coat of PU Paint (min 50 micron thick) of approved shade etc. complete.

with zinc coated nut-bolt as required for safety, structural stability of all works at site. Breaking of floor for anchoring and its repair

shall also be included for this work.

Providing and fixing in position collapsible steel shutters with vertical channels 20 x 10 x 2 mm braced with flat iron

Rupees Sixty Two and Seventeen

57 206.30 diagonals 20 x 5 mm size with top and bottom rails of T_rin 40x 40 x 6 mm with 38mm dia, steel pulleys complete with Kg 62.18

bolts, nuts, locking arrangements, stoppers handles including applying a priming coat of red lead paint.

Providing and fixing PUF Insulated continueous sandwich panels for walls of total thickness not less than 40 mm and width

1.0 m made out from continue line method on automatic plant.Panel shall have 0.35 mm thick pre coated GI sheet on both

side of Polyurethane Foam confirming to IS 12436:1988.The Precoated sheet shall be of minimum 240 mpa steel grade

confirming to IS 14246:1995 and shall have zinc coating of minimum 120 gsm as per IS:277:1992 , 5-7 microns epoxy primer

Rupees Two Hundred Eighty Seven

58 334.90 on both side of the sheet and polyester top coat 15-18 micron.The PPGI Sheet shall have plastic protective guard film of Sqmt. 287.31

and Thirty One Paise

minimum 25 microns to avoid scratches during trasportation.The panels shall be vertically joined together by tongue and

groove joints. The PU Foam shall be self-extinguishing, fire retardant type having minimum density of 40 Kg/Cu.mt.( +, -

Kgs) including 0.25 mm thick craft paper edging on both edges. The panels shall be fixed to the steel frame structure with

minimum 5mm thick self tapping GI screws of required length and nos. with minimum spacing of 300 mm c/c.

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Providing and fixing of Bottom and top U track for closing of end joints for cut PUF panels of size of 52mm x 30mm with

5mm lipping on Both edges. The U track shall be made out of 0.5 mm thick pre coated GI sheet.The Precoated sheet shall be

of minimum 240 mpa steel grade confirming to IS 14246:1995 and shall have zinc coating of minimum 120 gsm as per

Rupees Five Hundred Eighty and

59 600.00 IS:277:1992 , 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micron. The PPGI Sheet shall Rmt 580.29

Twenty Eight Paise

have plastic protective guard film of minimum 25 microns to avoid scratches during transportation. The U track shall be

fixed with suitable POP rivet with wall roof panels and plinth with Expandable fastners with minimum spacing of 450 mm c/c.

The Utrack shall be fixed

Providing and fixing of Ridge flashing for roof panel shall be made out of 0.5 mm thick pre coated GI sheet . The Precoated

sheet shall be of minimum 240 mpa steel grade confirming to IS 14246:1995 and shall have zinc coating of minimum

gsm as per IS:277:1992 , 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micron. The PPGI Rupees Five Hundred Twenty and

Sheet shall have plastic protective guard film of minimum 25 microns to avoid scratches during transportation. The ridge Forty Three Paise

shall be fixed to the steel members by pop rivet or self drilling/self stitching fastners @ maximum 450 mm c/c along length

of capping/flashing etc complete .

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm Thick Densified

edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have , light reflection 85%

non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal connductivity 0.043 degree for

best thermal Insulation . The Light weight calcium Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos

having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on true

horizontal level suspended inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams per sqm

including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and size of 24X38mm made

from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm

(Minimum) sheet spaced 1200mm along spaced between main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm

and secondary cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at

middle of the 1200X600mm panel to form grid of size 600X600mm resting on periphery walls/partitions on a perimeter wall Rupees One Thousand Six Hundred

angle pre-coated steel of size (24X24X3000mm made of 0.46pok dry wall screws @ 230mm interval and laying 15mm thick Seventy Four and Fourteen Paise

Densified edges light weight calcium silicate ceiling tiles of approved texture (Fine Fissured/Cosmos/Spintone) in the grid

including, cutting /making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever

required, Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with

12.5mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel level clips of size 85X30X0.8mm,

spaced at 1200mm centre to centre long main ‘T’ bottom exposed with 24mm of all T-sections shall be pre-painted with

polyester baked paint, for all heights, as per specifications, drawings and as directed by engineer-in-charge.Note:- Only

calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed

frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tiles shall have NRC. Value of

(Minimum) for Fine fissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85% non-combustible as per B.S.

part IV, 100% humidity resistance and also having thermal conductivity. 0.043° w/m KC.for the best thermal Insulation

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Providing and fixing five courses water profing treatment with bitumen felt consisting of second and fourth course of blown

/ bitumen or/ and residual bitumen applied hot at 1.2 kg.per Sq.M.of area for each course and first course with fibre base

bitunen saturated under lay type land third course with fibre base self finished felt type 2 grade 1 and fifth and final course

of stone grit 6mm and down size or pea sizes gravel spread at 0.008 Cu. Metre / Sq. metre including preparation of surface Rupees Five Hundred Twenty Four

excluding grading complete with Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 and Eighty Nine Paise

mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar

creme out upto surface using white cement including rounding off junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as directed.

Providing & laying cement vata (10 cm x 10 cm size) quartar round in cement mortar 1:1 including neat cement finishing Rupees Twenty Four and Twenty

watering etc. complete. For all floor Eight Paise

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 127mm x 38.10mm x

1.35mm @wt. 1.384kg/m, horizontal Four track member size 122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical

Rupees Two Thousand One

member of size 122.20mm x 31.75mm x 1.50mm @1.398 kg/mt with sliding shutters of horizontal member size 40mm x

64 12.40 Sqmt. 2,140.33 Hundred Forty and Thirty Three

18mm x 1.29mm@ 0.456kg/mt ,vertical member of size 40mm x 18mm x 1.29mm @ 0.456 kg/mt with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc complete for window.

Providing and fixing 35 mm thick water proof flush door solid core double shutter with 1mm thick laminated sheet on

both side of the shutter having teakwood lipping edge patti of 38 mm x 25.4 mm on all edges, including Indian teak wood

frames 12 cm x 7 cm with Melamine Polish matching shade of laminate with Magnetic catcher triple strip vertical type(2

Rupees Four Thousand Forty Nine

65 33.00 Nos), S.S. 304 tower bolt (barrel type) 300x10 mm (2 Nos) (Make : Define, Kich : TBF312S), Main door set handle 19mm dia x Sqmt. 4,049.07

150 mm SS 304 MATT 10 x 150 mm connector (2 Nos), MAKE: DEFINE: DF-PH-02, kich:PRDH1906S and SS matt Hinges of

100mm X 75mm X 3.2mm (8 Nos) (Make : Kich Item No.PRBHT2B34 and Define Make - Item No. DF-BBH-04) with

necessary SS fixtures and fastenings etc. complete all SS fittings to be of SS304 matt finish as directed by Engineer-in-charge.

Providing and fixing wash down water closet wall hung (European type, W.C. Pan) with integral P or S trap including jointing

the trap with soil pipe in Cement Mortar 1:1 (1- Cement : 1-fine sand) (A) vitreous China Pattern :(i) in white colour, including

plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers, Providing and fixing G.I. inlet

Rupees Nine Thousand Six Hundred

66 8.00 connection for flush pipe with W.C. Pan, Providing and fixing 32mm dual flow metropole valve including concealed body Nos 9,659.54

Fifty Nine and Fifty Three Paise

with exposed shutoff provision and round flange of approved quality including fixing in pipe line etc. complete and

providing and fixing Health Faucet Heavy duty having pipe length of 1 rmt with hook with fitting etc. complete as

directed by engineer in-charge. (Make Hindware, Model as specified)

Providing and fixing Urinal of approved quality including connection with 15 mm dia brass screw down stop tap and with

Rupees Four Thousand Six Hundred

67 3.00 integral longitudinal flush pipe. (A) Squating plate pattern white earthenware 550mm x 300mm. (Make Hindware, Nos 4,671.86

Seventy One and Eighty Five Paise

Model as specified)

Providing and fixing raised toilet seat with cover for handicap toilet (Model R-35: Presalit – Commander or equivalent) as Rupees One Thousand Six Hundred

recommended by the etc completed as directed by E.T.C/PMC Thirty Eight and Seventy Two Paise

Rupees One Thousand Three

Providing and fixing 2 Nos. support arms and backrest to mount at fixed height (Model R 1100 -Commander or equivalent)

69 1.00 Nos 1,349.12 Hundred Forty Nine and Eleven

for handicap toilet complete as recommended by the etc completed as directed by E.T.C/PMC

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Providing and fixing table top Wash Basin single hole for piller tap and making good the same but including fitting (A)

Vitreous chaina : (II) Flat back wash basin 550mm x 400mm size in white colour including provinding and fixing C.P. brass

Rupees Five Thousand Six Hundred

70 8.00 waste coupling of 32mm dia., chromium plated bottle trap with necessary couplings of approved quality, M. I. fisher union of Nos 5,601.46

One and Forty Six Paise

32mm dia., C.P brass pillar tap of 15mm dia., PVC connection pipe from stop cock to pillar tap etc. complete. (Hindware,

Cera, Varmora,Johnson make)

Providing 18mm thick (400mm X 1100mm) Granite partition for urinals fixed with Chemical and Cement Grout from wall as Rupees Seven Hundred Eighty

directed by Architect / engineer incharge Seven and Seventy Seven Paise

Rupees Two Thousand Three

72 8.00 Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap. (i) 15mm dia. Nos 2,324.01 Hundred Twenty Four and One

Rupees Two Thousand Six Hundred

73 8.00 Providing and fixing two way bib taps of following size.(B) Brass chromium plated screws down Bib Tap. (i) 15mm dia. Nos 2,681.55

Eighty One and Fifty Five Paise

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following nominal diameter of Rupees Six Hundred and Twenty

self cleansing design with C.I screed down or hinged grating including the cost of cutting and making good the walls. Three Paise

Rupees One Thousand Two

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of

75 8.00 Nos 1,246.92 Hundred Forty Six and Ninety One

300mm x 300mm size (inside) with standard weight.(i) Square mouth traps.(B) 150mm x 100mm size P or R type

Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. Rupees Two Hundred Fifty Four and

complete.(i) 20mm dia Seventy Eight Paise

77 8.00 Providing and fixing C.P. Angle stop cock 15 mm Heavy duty with cap Nos 407.42 Rupees Four Hundred Seven and

Providing & fixing of wall diverter 2 in 1 system with provision for both spout and overhead shower complete with bend Rupees Eight Thousand Five

pipe. OVERHEAD SHOWER Hundred Eighty Five Only

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood Rupees Eight Hundred Fifty Nine

sheet and fixing to wooden pluge with C.P. brass screws and washers. and Forty Paise

Providing laying and jointing in true line and level 50 mm dia. U.P.V.C. Pipe (SCH- 80) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of Rupees Four Hundred Fifty Seven

clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and and Twenty Four Paise

joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe (SCH- 40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of Rupees One Hundred Ninety Five

clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and and Sixty Six Paise

joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with Rupees One Hundred Nineteen and

the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing Fourteen Paise

of pipe and joints and fixing the same with adhesive solvent, including cost of all materials

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe (SCH- 40) for cold water including fittings make

PRINCE / UPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with Rupees Ninety One and Eighty

the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing Three Paise

of pipe and joints and fixing the same with adhesive solvent, including cost of all materials

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe (SCH- 40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with Rupees Seventy Two and Sixty Four

the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing Paise

of pipe and joints and fixing the same with adhesive solvent, including cost of all materials

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of Rupees Eight Hundred Thirty Four

the size 160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be Concealed in and Thirty Eight Paise

walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp Rupees Eight Hundred Ninety Seven

of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in and Seventy Eight Paise

walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total

Rupees Two Thousand Nine

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

87 3.00 Nos 2,932.93 Hundred Thirty Two and Ninety

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc.

complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line.

88 4.00 Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (i) 25mm dia. Nos 132.89 Rupees One Hundred Thirty Two

89 8.00 Providing and fixing ball cock of approved. quality as directed.(B) Abonite (i) 25mm dia. Nos 102.91 Rupees One Hundred Two and

90 25.00 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg. Nos 958.17 Rupees Nine Hundred Fifty Eight

Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and painting with two coats of Anti-corrosive paint Rupees Two Hundred Seven and

etc. complete. Sixty Five Paise

Providing and fixing Gun metal check or non-return Rupees Six Hundred Sixty Three and

fullway wheel valve.(E) 40mm dia. Forty Two Paise

Providing erecting and fixing Triple coated ISI water tank of required capacity each with all necessary fittings and connection

93 6,000.00 Ltr 9.50 Rupees Nine and Forty Nine Paise

etc. complete on terrace

Rupees Fifty Seven Thousand One

Construction of a septic tank of size 3.60 m X 1.15 m X 1.50 m. as per the approved drawing & design etc.in all sort of soil

94 3.00 Nos 57,182.16 Hundred Eighty Two and Sixteen

complete as directed and approved by engineer incharge.

Paise Eighteen Thousand Two

Construction of a soak well of size 1.5 m Diameter and 2.4 m Deep. as per the approved drawing & design etc.in all sort of

95 2.00 Nos 18,229.49 Hundred Twenty Nine and Forty

soil complete as directed and approved by engineer incharge.

Rupees Two Thousand Seven

Providing and Fixing the S.S. 304 Letters of given size as per Architect's drawings (Approx Height of each letter 10 to

96 150.00 Nos 2,750.43 Hundred Fifty and Forty Three

inches) along with all necessary hardwares and accessories

Supply and Installation of Stone CNC embosed takti as per drawings by consultant - Making 150mm thick, 1m X 2.5m Stone

Rupees Nine Thousand Eight

97 2.00 Mural erected upon Brick and Concrete structure. Chiselled and carved to embose give n matter and provide lower part with Nos 9,898.00

Hundred Ninety Eight Only

texture of upto 5mm tippani.

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Signage : Stainless Steel Plate of grade 304 having size 500x300x1mm /as required thick (brush finish) shall be used as base /

Rupees Fifty Thousand Four

98 4.00 background.The height of the front shall be 75 mm to 100 for name pasting including it will be hanged by s.s. steel rod by Sqmt. 50,409.10

Hundred Nine and Ten Paise

chain item should be executed as per drawing and after aproval of client/consultant.ething

Supply and Installation of Pole mounted perforated stainsless steel dustbin. Fixed with rivet on both sides for 100 degree

Rupees Six Thousand Five Hundred

99 10.00 axial movement. Open from top. Bin Height 900mm Radius 600mm. Mounted on set of 30mm dia SS pole at Height of Nos 6,565.00

Sixty Five Only

1150mm from existing ground level. Weight Baring Capacity : 40KG. Material: SS-202

Providing and Fixing Indian CP teak wood furniture work for various decks like benches, sittings, table, chairs, etc... All wood

work framing such as sitting stands, foot rest, legs, etc.. shall fabricate fromwooden batterns with any shape and size

treated with Anti-Termite and Painted with Exterior Marine grade Spar Varnish respectively under related line item

specification under approved make list and manufacturer specifications. Table and benches shall have with clear top,

comprising of 50mm thick best quality Indian CP teak wood, of size 2000mmx700mm ( Clear Plank Size: 2000mmx233mm )

& 2000mmx450mm ( Clear Plank length not less than 2000mm ) respectively fixed on Wooden frame work clear top area of

any component. It allows: i) All wooden members shall be of seasoned teak wood treated with anti-termite chemical ii )

wood plank top shall be treated with exterior marine grade Spar varnish of MRF/ASIAN or approved per manufacturer

specification. Bottom of wood plank floor shall be treated with 2-coats of Black Japan paint with respective primer and

Rupees Eight Thousand Five

100 25.00 application methodology as directed by EIC iii) All supporting post at any interval shall be interlocked and fixed rigidly with Nos 8,585.00

Hundred Eighty Five Only

planks/metal cleats, screws, nuts & bolts-check nuts ( 60microne Hot deep Galv./ SS-316 ) and heavy duty virgin nylon

buffers rigidly fixed to post etc.. complete in true line level and alignment to avoid rattle during usage and per details

approved. All Wooden frame structures shall be treated with exterior marine grade Spar varnish under relevant tender item

and mfg. spacs. iv ) Various types of molding, grooves, kholiya etc.. shall be dressed with machine and finished in lucrative

manner with proper joinery & jointed by inserting z-clips & pins on joints as approved per shop drawing. v) All necessary

fittings, fixtures, nut bolts, washer, plates, customize detail for fixing and fittings, exterior grade glues & adhesive, etc. comp.

all SS316 shall be with matt / brush finish as desired by architect to complete the entire product with satisfactory level. vi) it

shall be wrapped with fixed chapda at specified interval per approved shop drawing with SS-316 patti having min. size

25mmx1mm with SS nails. vii) It shall be touched up for pin holes, hair cracks with wood saw and adhesive & smoothen.

Sign board per Squate Meter :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP (Aluminum

composite Panel); size 1meter x1 meter as per design of IRC-67-2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiective sheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T. Specifications; 4 mtr long stand post (2 Nos.) of

75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 50 x 50 x 5mm; Rupees Twelve Thousand Three

painted with bestquality epoxy coatings in black and white bends. the details of symbol or inscription / numerals for each Hundred Ten and Eighty Nine Paise

board shall be as per the instruction of engineer in charge.The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms.

for each leg.including excavation, curing etc.complete under the supervision of engineer in charge. A warranty for 10 years

for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from

third party test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Supply & Fixing of Multi Fun Play System: All products must be tested and certified to meet EN 1176 safety standards. The

EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS

only. The EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 100 public park

projects in India either by themselves or through their dealers or contractors. Multi fun Play system consisting of Platform -

3nos, Triangle deck - 1nos, 7 step stair case with railing - 2nos, Connector for railings and guard rails - 8 nos, 114mm &

89mm hot dip galvanized poles with 3.2mm thick - 17nos, Metal closed panel Small - 1nos, Top rail for monkey bar loops -

1nos, Butterfly climber 3 step - 1nos, Safty guard rail for metal climber - 2nos, Multi color step bridge frame - 2nos, Climbing

rail - 1nos, Round clamps with bearing system - 5nos, Double slide exit panel - 2nos, Double wave slide - 2nos, Double wave

Rupees Six Lac Ninety Six Thousand

102 1.00 round panel - 2nos, T - Pipe bridge - 1nos, Castle spinner panel - 1nos, Sun flower - 1nos, Straight tunnel slide - 1nos, Bend Nos 6,96,900.00

Nine Hundred Only

slide - 1nos, Multi color steps Top & Bottom - 20nos, Castle roof - 3nos, Delta shape handels - 5nos, Bowl - 4nos. For Dect &

Stairs 2mm solid steel punched sheet (for making of platform & stairs) powder coated of 100 micron for perfection should

be used. Material should be hot dip galvanized pipes & further powder coated to make a structure & LLDPE plastic granuels,

which are further Roto Moulded to form plastic component in shape. These high grade plastic components are non-toxic,

antistatic, fire retardant and the colors are U.V Stabilized. No sharp corners & rough surface in Metal Parts which are used as

per indian standard to make this funstation. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel

316 of tamper resistant stainless steel. Equipment should be approved with client/architect before procurement.PLAY

EQUIPMENT DIMENSIONS: 11m X 8.5m X 5.8m

Supply & Fixing of Zig Zag - E: All products must be tested and certified to meet EN 1176 safety standards. The EN

certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The

EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 20 public park projects in

India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on

Rupees One Lac Twenty Six

103 3.00 the notified certifying bodies websites as online verification is mandatory. The equipment comprises of two parallel wavey Nos 1,26,250.00

Thousand Two Hundred Fifty Only

support bars of height 3.0 m. Handrail of height Dia 32 mm. Exposed hardware shall be covered with ultra violet stabilized

plastic safety caps as per EN1176 standards as a safety feature against protruding hardware. Equipment should be approved

with client/architect before procurement.

PLAY EQUIPMENT DIMENSIONS: 4.54 m x 0.72 m x 3.0 m..

Supply & Fixing of Monkey Bars VFM - E: All products must be tested and certified to meet EN 1176 safety standards. The

EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS

only. The EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 20 public park

projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly

displayed on the notified certifying bodies websites as online verification is mandatory. Support posts of height 2.5 m are to Rupees Fifteen Thousand One

be schedule hot dipped Galvanized steel with a 114 mm OD {Outer Diameter} and 3.2mm thick. All the posts are to be Hundred Fifty Only

finished with a baked on powder coat finish. Top rail and Railing - 89mm with 3.2mm thickness, 31.8mm CRC pipe with 2mm

thickness, 25mm CRC pipe with 2mm thickness hot dipped galvanized steel pipes with a baked on powder coating finish of

100 micron. Equipment should be approved with client/architect before procurement. PLAY EQUIPMENT DIMENSIONS:

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Supply & Fixing of Spider Web - E:All products must be tested and certified to meet EN 1176 safety standards. The EN

certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The

EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 20 public park projects in

India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on

the notified certifying bodies websites as online verification is mandatory. The length of the equipment is 3.5m, the width of

Rupees Sixty Five Thousand Six

105 1.00 the equipment is 2.5 m and the height of the equipment is 2.6m. The equipment comprises of 6 numbers of Upright Nos 65,650.00

Hundred Fifty Only

structural posts of height 2.6 m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 3.2mm (wall) thickness

of the tubing. Middle pipe of Dia 75 mm and 3.2 mm thick.Other pipes of Dia 31.8mm & 25mm With Wal thickness 2mm

should be used. Net Climber of size 2.6 m. The poles are welded on to a base plate made from steel with 114mm inner

diameter. Equipment should be approved with client/architect before procurement. PLAY EQUIPMENT DIMENSIONS: 3.5 m

Supply & Fixing of Merry Go Round Dx: All products must be tested and certified to meet EN 1176 safety standards. The EN

1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only.

The EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 20 public park projects in

India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on

the notified certifying bodies websites as online verification is mandatory. The Merry go round consists of a round platform Rupees Twenty Five Thousand Two

which is made of hot dipped galvanized steel and has a thickness of 2.0 mm. It is of Dia 1210 mm. It has handrails which is Hundred Fifty Only

made of hot dipped Galvanized steel and of dimensions as 31.8mm and 2mm thick Pipe. All the handrails are connected to

the Centre with the help of a rod which is also made of Galvanized steel and of Dia 75 mm with 3.2 mm wall thickness .

Equipment should be approved with client/architect before procurement.PLAY EQUIPMENT DIMENSIONS: 1.2m Dia and

Supply & Fixing of See Saw Four Seater - E: All products must be tested and certified to meet EN 1176 safety standards. The

EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS

only. The EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 20 public park

Rupees Twelve Thousand Six

107 2.00 projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly Nos 12,625.00

Hundred Twenty Five Only

displayed on the notified certifying bodies websites as online verification is mandatory. The See Saw consists of 2 poles of

Dia 114mm and thickness of 2.5mm which balances the horizontal rod at the center which is of size 3110 mm length and Dia

114 mm. It consists of 4 seats which is made of LLDPE virgin plastic of size 305mm X 213 mm X 125 mm.

Supply & Fixing of swing: All products must be tested and certified to meet EN 1176 safety standards. The EN

certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The

EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 20 public park projects in

India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on Rupees Thirty Five Thousand Three

the notified certifying bodies websites as online verification is mandatory. Shaped structural posts of height 2.8 m are to be Hundred Fifty Only

schedule HOT DIP Galvanized steel with a 75mm & 60mm OD and 3.2mm (wall) thickness of the tubing. 2 nos Swing seats

attached with PVC Coated SS (316)Chains.Equipment should be approved with client/architect before procurement. PLAY

EQUIPMENT DIMENSIONS: 3.3 m x 1.3 m x 2.8 m.

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Supply & Fixing of Wavey Slide - E: POLE of height 2.80 m, are to be schedule Galvanized steel with a 60mm OD. Deck of size

1.14 x 1.14 m and Staircase of size 1.84 m x 0.68 m are fabricated from 2mm perforated solid punched steel. Deck

perimeter is precision pre punched for attachments. Decks are pressed, punched, and welded sand blasted and vinyl plastic

coated to a thickness of 4mm. Handrail of height 2.5 m and Dia 32 mm shall be an all-robotic welded unit, fabricated from

Rupees Fifty Three Thousand

109 3.00 O.D. galvanized steel pipes. Piped walls panels of size 1 m are all robotic welded fabricated from 32 O.D. galvanized steel Nos 53,025.00

Twenty Five Only

pipes for the outer pipes and 25mm O.D. galvanized steel for the inner parallel bars. Straight slide of size 2.72 m x 0.92 m x

1.50m. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 of tamper resistant stainless steel.

Exposed hardware shall be covered with plastic safety caps as per EN1176 standards. PLAY EQUIPMENT DIMENSIONS:

Applying two coats of Birla or Asian acrylic lappy (putty) and two coats of primer of approved brand and manufacture on

110 4,875.70 new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other Sqmt. 40.59 Rupees Forty and Fifty Nine Paise

foreign matter and sand papered smooth

Wall painting (three coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface

Rupees One Hundred Twenty Nine

111 4,875.70 to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and Sqmt. 129.94

and Ninety Three Paise

sand papered smooth

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade Rupees One Hundred Twenty Two

after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete and Thirteen Paise

Applying priming coat over new steel and other metel surface after and including preparing the surface by throughly

Rupees Thirty Seven and Twenty

113 315.10 cleaning, oil,grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper Sqmt. 37.29

with ready mixed priming paint brushing red lead

Painting two coats (excluding priming coat) on new steel and other metal surface with synthetic enamel paint, brushing to

114 315.10 Sqmt. 69.15 Rupees Sixty Nine and Fifteen Paise

give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

Road marking with hot applied thermoplastic paints with reflectorising glass beads on bitumin surface providing and laying a

hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250gms per Sq.mt. area, thickness

of 2.5mm is excluding of surface applied glass beds as per IRC:35-2015. The finished surface to be level, uniform and free

from streaks and holes. zebra patta /bump patta lane/center line/ edge line/cut patta. The white color marking should Rupees Three Hundred Sixty Seven

provide liminance coefficinet on cemend road shalll be min 130 mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux and Seventy Two Paise

during the service life during the day time. The marking should meet the performance criteria for night time reflectivity, wet

reflectivity and skid resistance as mentioned in the section-15 of IRC 35-2015. Warranty for the Retro reflectivity should be

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting Rupees Four Hundred Sixty Seven

base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with and Sixty Three Paise

necessary Lamp holder/ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete Cat. III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box,

Rupees Two Hundred Sixty Eight

117 20.00 single mounting base frame covered with textured / metallic / white front plate modules erected on / in wall / ceiling with Nos 268.66

and Sixty Six Paise

following type accessories

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch &

Rupees Five Hundred Twenty Eight

118 15.00 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling Nos 528.23

and Twenty Three Paise

as per pipe erected with following type of accessories. [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete

with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected Rupees Eight Hundred Eighty Three

on / in wall / ceiling as per pipe erected with following type of accessories. [II] For 16A Plug and 16 amp switch with 2-2.5 and Seventy Five Paise

sq.mm Cu. Wire from mcb db board., (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete Cat. III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of Rupees Twenty Six and Twenty Six

pipes, in approved manner as directed. Paise

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or

Rupees Thirty Six and Thirty Six

121 500.00 ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of Rmt 36.36

pipes, in approved manner as directed. (b) 25 mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or

122 200.00 ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of Rmt 60.60 Rupees Sixty and Sixty Paise

pipes, in approved manner as directed. (c) 32 mm

Providing & laying approved make ISI marked HDPE 6Kg / cm2 (Class-3) as per IS:4984:1995 PE-80 to be erected at road Rupees One Hundred Ninety One

crossing on or floor as directed for laying of cable. The pipes as following size of dia & weight per 6 mtr. (B) 50 mm dia. and Ninety Paise

Providing & laying approved make ISI marked HDPE 6Kg / cm2 (Class-3) as per IS:4984:1995 PE-80 to be erected at road

Rupees Eight Hundred Sixty Two

124 200.00 crossing on or floor as directed for laying of cable. The pipes as following size of dia & weight per 6 mtr. (F) 110 mm inner Rmt 862.54

and Fifty Four Paise

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to

be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

125 600.00 Rmt 90.90 Rupees Ninety and Ninety Paise

green colour for earth continuity of following size (a) with medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq.

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to

Rupees One Hundred Twenty Four

126 300.00 be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for Rmt 124.23

and Twenty Three Paise

earth continuity of following size (a) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm.

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to

be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for Rupees Two Hundred Ninety One

earth continuity of following size. (a) with medium class Rigid PVC pipe and accessories. (h) 4 wire 6 sq. mm. (Main Panel to and Eighty Nine Paise

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following

Rupees One Hundred Fifty Nine and

Fifty Eight Paise

(E) 3 core 2.5 Sq. mm

Supply, installation, testing and commissioning of XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be Rupees Two Hundred Nineteen and

erected as directed of following size. (F) 3 core 4 Sq. mm Seventeen Paise

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Supply, installation, testing and commissioning of XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor

with water swellable coating which should protect against saline water & for 1.1 KV. to be laid on wall with necessary Rupees Two Hundred Eleven and

clamps or in existing trench / pipe of following size of cables Nine Paise

(A) 3 1/2 core 25 Sq. mm ( 16 Sq.1/2 mm core)

Supply, installation, testing and commissioning of XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor

with water swellable coating which should protect against saline water & for 1.1 KV. to be laid on wall with necessary Rupees Five Hundred Seventy and

clamps or in existing trench / pipe of following size of cables Sixty Five Paise

(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)

Supply, installation, testing and commissioning of XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor

with water swellable coating which should protect against saline water & for 1.1 KV. to be laid on wall with necessary Rupees Eight Hundred Fifty Five

clamps or in existing trench / pipe of following size of cables and Forty Seven Paise

(G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core)

Supply, installation, testing and commissioning of XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor

with water swellable coating which should protect against saline water & for 1.1 KV. to be laid on wall with necessary Rupees One Thousand Sixty and

clamps or in existing trench / pipe of following size of cables Fifty Paise

(H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor with water swellable coating

Rupees One Hundred Thirty Four

134 50.00 which should protect against saline water & 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at Rmt 134.33

and Thirty Three Paise

road crossing or floor of following size of cable. (C) 4 core 6 Sq. mm

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity

Rupees Three Hundred Fifty Three

135 250.00 & confirms to IS : 8828 in existing box having following capacity. Nos 353.50

and Fifty Paise

(A) 6 to 32 Amp. cat III.

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity

Rupees Three Hundred Eighty Eight

136 120.00 & confirms to IS : 8828 in existing box having following capacity. Nos 388.85

and Eighty Five Paise

(B) 40 Amp. cat III

Miniature circuit breaker single pole 1A to 32A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA Rupees Three Hundred Eighteen

to be erected in existing box. confirming to IS 8828/1996 with ISI Mark . cat III. and Fifteen Paise

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 6 KA and suitable for operation on single phase 240 V. having characteristic of quick action & tripping with all Rupees Two Thousand Three

advance feature & do not incorporate any electronic component. for following Max. rating erected as directed Hundred Twenty Three Only

(i) 25 Amps.DP. cat III.

139 5.00 (iii) 63 Amps. DP. cat III. Nos 3,131.00 Rupees Three Thousand One

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar,

Rupees One Thousand Three

neutral link, earth bar and DIN rail, Conforms to IS8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

140 3.00 Nos 1,359.46 Hundred Fifty Nine and Forty Six

MCBs.(The DBs should be used of same company of MCB to be used) suitable for (b) sheet steel double door (IP-43).

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar,

Rupees One Thousand Seven

neutral link, earth bar and DIN rail, Conforms to IS8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

141 2.00 Nos 1,759.42 Hundred Fifty Nine and Forty Two

MCBs.(The DBs should be used of same company of MCB to be used) suitable for (b) sheet steel double door (IP-43). (iv)12

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of Rupees One Thousand Forty Four

MCBs.(The DBs should be used of same company of MCB to be used) suitable for (b) sheet steel double door (IP-43). (ii)6 and Thirty Four Paise

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar,

Rupees Seven Hundred Forty One

143 10.00 neutral link, earth bar and DIN rail, Conforms to IS8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of Nos 741.34

and Thirty Four Paise

MCBs.(The DBs should be used of same company of MCB to be used) suitable for (b) sheet steel double door (IP-43). (i)4 way

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board

having necessary IP-42 protection & above as per requirements made from 14 SWG thick CRC M.S. sheet for outer body &

doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary supporting angles, flats including cutting, bending,

drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge

with erection of supplied switch gears, BUSBARS, with suitable size of inter connecting PVC copper wire / copper-aluminium

Rupees Seventeen Thousand Seven

144 2.00 strips, rubber grommets, rib, bakelite control fuses for measuring instruments, earth bus & earth bolts, foundation flange - Nos 17,760.85

Hundred Sixty and Eighty Five Paise

bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket, heavy duty end

terminal connections complete. The Panel shall be painted with epoxy powder coating. (The rates excludes the cost of

switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall be supplied with following approved manufacturers with following size.

(B) locally fabricated panel board

Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC -

Rupees Eighteen and Eighteen

145 1,200.00 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control Rmt 18.18

wiring) with required size of copper lugs, nuts and bolts if required.

(b) One wire 1.50 sq. mm.

Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC -

146 850.00 Rmt 40.40 Rupees Forty and Forty Paise

erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if required. (d) One wire 4.00 sq. mm.

Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Rupees Sixty Two and Sixty Two

erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control Paise

wiring) with required size of copper lugs, nuts and bolts if required. (e) One wire 6.00 sq. mm

Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Rupees One Hundred Two and One

erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control Paisa

wiring) with required size of copper lugs, nuts and bolts if required. (f) One wire 10.00 sq. mm

Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Rupees One Hundred Fifty Eight

erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control and Fifty Seven Paise

wiring) with required size of copper lugs, nuts and bolts if required. (g) One wire 16.00 sq. mm.

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Rupees Two Hundred Sixty Four

erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control and Sixty Two Paise

wiring) with required size of copper lugs, nuts and bolts if required. (h) One wire 25.00 sq. mm.

providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at

Rupees Nineteen Thousand One

151 1.00 V. having Normal current rating 200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with Nos 19,139.50

Hundred Thirty Nine and Fifty Paise

all internal connections & complete erected in existing 16 G.M.S.housing. ICS=100% of ICU only Cat III

Approved make Earth fault Relay suitable to mount with inter connection to moulded case circuit breaker having CT Rupees Five Thousand Eight

152 1.00 ratio & MCCB rating as following along with shunt trip 220V AC. with all internal connections & complete erected in existing Nos 5,878.20 Hundred Seventy Eight and Twenty

M.S.housing. (2) 125 A -200 A , CT Ratio 1/200 Paise

Supplying & erecting approved make Four Pole 415V change over switch interior for panel mounting with operating Rupees Twenty One Thousand One

153 1.00 mechanism A.C.23 duty confirming to IS for Nos 21,139.30 Hundred Thirty Nine and Thirty

(D)200A Cat-lll Paise

Supplying and erecting approved make panel mounting type Digital Ammeter having 3 digits LED display, external CT

Rupees One Thousand Eight

154 1.00 operated, calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC , erected on existing panel board with all Nos 1,868.50

Hundred Sixty Eight and Fifty Paise

connection, wiring etc .with manufacturers calibration certificate.

Supplying & erecting in earthpit of minimum

bore dia. 225mm size ASH or approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of

Rupees Eight Thousand Three

40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by

155 1.00 Nos 8,370.88 Hundred Seventy and Eighty Eight

highly conductive compound with high charge dissipation suitable for following type of applications. [B] For Electrical

installation up to 11 KV located in other than normal soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg.

Supplying & erecting in earthpit of minimum

bore dia. 225mm size ASH or approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free G.I.Pipes having Outer pipe dia of 80 mm having 80- 200 Micron galvanising, Inner pipe dia of

40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by Rupees Twelve Thousand Four

156 2.00 highly conductive compound with high charge dissipation suitable for following type of applications [C] For Electrical Nos 12,498.75 Hundred Ninety Eight and Seventy

Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System (like Five Paise

Automation, SCADA)i.e. independent Earthing located in other than normal soil i.e. Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Providing and erecting Annealed bare Rupees Nine Hundred Thirty Seven

Copper wire 8 to 16 SWG. and Twenty Eight Paise

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel Rupees Ninety One and Eighty

board, Motors etc. using proper clamp. Paise

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid Rupees One Hundred Sixty One and

on wall with necessary clamps or in existing trench / pipe of following size of cables (C) 4 core 10 Sq. mm [4-3-4] Sixty Paise

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on Rupees Two Hundred Twenty One

wall with necessary clamps or in existing trench / pipe of following size of cables (B) 4 core 25 Sq. mm [4-3-5] and Nineteen Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall

Rupees Four Hundred Thirty Eight

161 300.00 with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (D) 3 1/2 core 70 Sq. Rmt 438.34

and Thirty Four Paise

mm ( 35 Sq. mm 1/2 core)[4-4-3]

Providing & erecting Switch board for Computer or electric apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single mounting base frame covered with textured/metallic /white

front plate,modules erected with necessary connections as directed Rupees One Thousand Two

162 60.00 1 no. 6A/16A universal plug-switch combined. Nos 1,274.62 Hundred Seventy Four and Sixty

3 nos. 6A Switch Two Paise

3 nos. 6A 5 pin Plug

For Modular Type accessories Cat. II

SITC of following type of Modular Type accessories mounted with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation Rupees Four Hundred Forty Eight

directed by Engineer In charge. and Forty Four Paise

(5) Electronic hum Free four or more steps EME Fan regulator (cat III)

Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling fan with Brush Less Direct

Current (BLDC) permanent ferrite magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies,

shackle kit with earthing provision, copper winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air Rupees Three Thousand Nine

164 30.00 delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with remote unit for Speed Control Nos 3,959.20 Hundred Fifty Nine and Twenty

and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (Max.), suitable for Paise

140 to 285 Voltage and rectifier circuit with surge, over current and overload protection , 50 Hz, Single phase AC Supply,

earthing etc. Complete as required.[ Make shall be approved by Engineer in Charge] (B) 1200 mm Sweep (48")

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete Rupees One Hundred Twenty Six

with proper insulation without leckage and earthing. and Twenty Five Paise

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm length each side and Rupees One Hundred Twenty Six

pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing. and Twenty Five Paise

Rupees One Thousand Nine

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers &

167 6.00 Nos 1,949.30 Hundred Forty Nine and Thirty

square frame. 200mm with 1350RPM Cat.II

Supplying and Installing IP64 Rated WarmWhite Surface Light for indoor fittings with high power LEDs wattage of 0.2 to

watt and above asembled on single MCPCB, efficiency more than 130 lm/w and corrosion free high pressure die cast

aluminium housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and polycarbonate

optics / lenses conforming to IS : 513 with company mark / name engroved or embossed 120 to 300 V, power factor more

Rupees Seven Hundred Ninety

168 42.00 than 0.95 , THD < 10% , CCT 4000K to 6500K, uniformity ratio > 0.7, luminaire efficiency > 85 lumens / watt, LED driver Nos 797.90

Seven and Ninety Paise

efficiency > 85 % , CREE / OSRAM / PHILIPS LUMILEDS / NICHIA / SEOUL / BRIDGE LUX (USA) make LED used for luminaire.

Each fitting required LM 79 & LM - 80 certificates. @ Square/ Circular Su rface/Recessed

Mounted Downlight with Provision for spring loaded mounting cliPs complete. (B) LED Panel Light with provision for Plane

front frame with translucent cover fixed to housing complete.IP20 (iv) 18 to 20 watts, 8" x 8", Surge- 2 KV cat III.

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Supplying and Installing IP64 Rated WarmWhite Surface Light for indoor fittings with high power LEDs wattage of 0.2 to

watt and above asembled on single MCPCB, efficiency more than 130 lm/w and corrosion free high pressure die cast

aluminium housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and polycarbonate

optics / lenses conforming to IS : 513 with company mark / name engroved or embossed 120 to 300 V, power factor more

Rupees Three Hundred Eighty

169 35.00 than 0.95 , THD < 10% , CCT 4000K to 6500K, uniformity ratio > 0.7, luminaire efficiency > 85 lumens / watt, LED driver Nos 383.80

Three and Eighty Paise

efficiency > 85 % , CREE / OSRAM / PHILIPS LUMILEDS / NICHIA / SEOUL / BRIDGE LUX (USA) make LED used for luminaire.

Each fitting required LM 79 & LM - 80 certificates. @ Square/ Circular Su rface/Recessed

Mounted Downlight with Provision for spring loaded mounting cliPs complete. (A) Tube Light with integral driver, (iii) 18-20

Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-III

Supply, installation, testing and commissioning of approved make Perforated C type cable tray. Made from pre- galvanized

sheet steel. The cable tray should be bended as per IS 2062/1079 . with max 17.5% perforation with coupler plate / Fish

plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction Rupees Four Hundred Ninety Nine

of engineer in charge. and Ninety Five Paise

(3) 150 X 50 X 1.5 mm Thick

Supply, installation, testing and commissioning ofapproved make Perforated C type cable tray. Made from pre- galvanized

sheet steel. The cable tray should be bended as per IS 2062/1079 . with max 17.5% perforation with coupler plate / Fish

plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction Rupees Seven Hundred Thirty Two

of engineer in charge. and Twenty Five Paise

(5) 300 X 50 X 1.5 mm Thick

Providing and fixing approved make 'T' Junction for Perforated C type cable tray. Made from pre galvanized sheet steel. The

Junction should be bended as per IS 2062/1079. with max 17.5% perforation with coupler plate / Fish plate and GI

hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer Rupees Two Hundred Seventeen

in charge. and Fifteen Paise

(3) 150 X 50 X 1.6 mm Thick ' T' Junction

Supply, installation, testing and commissioning of approved make 'T' Junction for Perforated C type cable tray. Made from

pre galvanized sheet steel. The Junction should be bended as per IS 2062/1079. with max 17.5% perforation with coupler

plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per Rupees Three Hundred Forty Three

instruction of engineer in charge. and Forty Paise

(5) 300 X 50 X 2 mm Thick ' T' Junction

Supply, installation, testing and commissioning of approved make '90° Elbow' for Perforated C type cable tray. Made from

pre galvanized sheet steel. The Junction should be bended as per IS 2062/1079. with coupler plate / Fish plate and GI

hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer Rupees One Hundred Ninety One

in charge. and Ninety Paise

(3) 150 X 50 X 1.6 mm Thick 90° Elbow

Supply, installation, testing and commissioning of approved make '90° Elbow' for Perforated C type cable tray. Made from

pre galvanized sheet steel. The Junction should be bended as per IS 2062/1079. with coupler plate / Fish plate and GI

hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer Rupees Two Hundred Eighty Seven

in charge. and Eighty Five Paise

(5)300 X 50 X 2 mm Thick 90° Elbow

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Supply, installation, testing and commissioning of approved make '90° Elbow' for Perforated C type cable tray. Made from

pre galvanized sheet steel. The Junction should be bended as per IS 2062/1079. with coupler plate / Fish plate and GI

hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer Rupees Two Hundred Eighty Seven

in charge. and Eighty Five Paise

(5)300 X 50 X 2 mm Thick 90° Elbow

Supply, installation, testing and commissioning of approved make 'Cross over Junction' for Perforated C type cable tray.

Made from pre galvanized sheet steel. The Junction should be bended as per IS 2062/1079 with max 17.5% perforation and

shall be coated with hot dip galvanizing as per IS 2629/4759. with coupler plate / Fish plate and GI hardware like nut - bolt Rupees Two Hundred Twenty Seven

and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge.. and Twenty Five Paise

(3) 150 X 50 X 1.6 mm Thick Cross Junction

Supply, installation, testing and commissioning of approved make 'Cross over Junction' for Perforated C type cable tray.

Made from pre galvanized sheet steel. The Junction should be bended as per IS 2062/1079 with max 17.5% perforation and

shall be coated with hot dip galvanizing as per IS 2629/4759. with coupler plate / Fish plate and GI hardware like nut - bolt Rupees Four Hundred Thirty Nine

and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge.. and Thirty Five Paise

(5) 300 X 50 X 2 mm Thick Cross Junction

Supply, installation, testing and commissioning of approved make Ladder type cable tray. Made from M.S sheet. The cable

tray should be bended as per IS 2062/1079 shall be fabricated of double bended channel section longitudinal members with

single bended Channel section. Rungs of members welded to the base of tha longitudinal members at 250 mm c/c spacing .

Rupees Seven Hundred Ninety Two

179 5.00 as per IS and shall be coated with hot dip galvanizing as per IS 2629/4759. with coupler plate / Fish plate and GI hardware Nos 792.85

and Eighty Five Paise

like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge..

(4) 450/400 X 50 X 2 mm Thick

180 120.00 Supplying and Installing Philips- 31385 7W Anthracite COB Garden Spike 300 7W, Aluminium, Grey, IP 65 Nos 1,565.50 Rupees One Thousand Five

System Wattage: 6W LED, Driver Integral: Constant Current

Input Voltage: 230-240Vac, Frequency: 50-60Hz

Operating Voltage: 100-277Vac, Operating Temperature: -15°C~+50°C

Light Source: NICHIA,cree,osram, LED Lumens: 500 lm

CRI (Ra): ≥80, LED Colour Temperature: 3000K / 4000K / 5700K Rupees One Thousand Two

181 150.00 Power Supply: Integral, Power Factor: ≥0.95, THD: <10%, Surge Protection: 2.5KV, Efficiency: >85% Colour Temperature: Nos 1,292.80 Hundred Ninety Two and Eighty

3000K,4000K, Luminous flux: 656 lm, Light Distribution: Asymmetrical Body: Die-Cast Aluminium, Diffuser: Clear Paise

Polycarbonate, Gasket: EPDM, UV stabilized engineering plastic reflector, IP65, Life: 50,000 hrs , Weight: 1.5 kg. Dimension:

162 dia x 115 x (mounting) 93 mm. IP67, IK04, Life: 50,000 hrs Finish: Graphite Grey/Anthracite Grey/Jet Black The

luminaire is BIS & CE certifications (NOTE: Final wattage capacity, light fixture colour, light Colour Coding

Temperature,Fixture sample is to be done and approved by the architect and Engineer incharge after sampling and mock-up

before finalization.)

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

UP & DOWN LIGHT : 18W LED ,IP:IP 65, IK:07, Driver Integral : Constant Current, Input Voltage : 230-240Vac , Frequency :

50-60 Hz , Operating Voltage : 100-277Vac , Operating Temperature : -15°C~+50°C, DIMENSION ; 145 X 100 x 150mm with

Body : Extruded & die-cast aluminium , Reflector : Mirror finish pure AL , Diffuser : Clear toughened glass , Mounting :

Surface - wall Rupees Two Thousand Twenty

Finish : Graphite Grey Only

Light Source : COB LED , Lumens : 1800 lm , CRI (Ra) : >80 , LED Colour Temperature : 3000K / 4000K

Power Supply : Integral , Power Factor : ≥0.95 , THD : 85% Luminous flux : 1219 / 1186 lm for 25° Beam Angle : 15° / 25° / 40°

(NOTE: Final wattage capacity, light fixture colour, light Colour Coding Temperature,Fixture sample is to be done and

approved by the architect and Engineer incharge after sampling and mock-up before finalization.)

Supplying & erecting IP 55 grade following size section pillar fabricated from joint less M.S. Sheet with angle iron legs made

from jointless M.S. Angle with cable clamps to be buried in ground to have appropriate erection to work uniform until

Rupees Two Thousand Two

183 10.00 erected with cement concrete foundation and 45 cm high bricks work finishing with plaster etc. hinged double door Nos 2,222.00

Hundred Twenty Two Only

internally supported on both side, (C) 60 X 30 X 45 cm section pillar fabricated from 16 Gauge MS Sheet with angle iron legs

45 cm long made from 35 X 35 X 5 mm thick MS angle. [6-6-1]

Supplying & erecting approved make IP 55 grade Company fabricated Timer Panel of following capacity for switch On-Off

street lights on time scheduling basis made from 16G CRCA sheet duly epoxy power painted inside and outside with hinged Rupees Fifteen Thousand Seven

184 10.00 doors and locking arrangement consisting of suitable size of 4 Pole MCB and 4 pole contactor (cat-III)with analog time Nos 15,752.97 Hundred Fifty Two and Ninety

switch, auto manual switch of same make and suitable input and output Bakelite terminals and with door earthing Seven Paise

approved by Engineer in charge. (B) 40 Amp [6-7-6]

Providing cement concrete.for foundation or for concrete filling in 1:2:4 ratio with 20 to 25 mm stone metal duly plastered Rupees Six Thousand Forty Nine

with necessary curing for pole muffing or any other purpose. [6-3-8/b] and Ninety Paise

3 Phase Borewell Submersible Pump Sets

Electric motor driven Borewell submersible pump set conforming to I.S. 8034 and motor conforms to IS-9283 working at

phase Rupees Seventeen Thousand Three

400/440 volt 50 C/S A.C. supply & 2900 Hundred Eleven and Forty Paise

R.P.M. Cat no-4.0, LPM-240, HP-1.5, Head-

PVC insulated flat submersible cable as per

detailed technical specifications of R/C of Rupees Three Hundred Twenty

GWSSB conforming to IS 694, IEC 60227 / Eight and Twenty Five Paise

Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with 40 psi Rupees Fifteen Thousand Four

inline type post carbon filter auto low & high pressure switches with following size of storage tank & LPH capacity & erected Hundred Two and Fifty Paise

as directed [B] 25 Ltr / Hr with 30 Ltr. Storage Tank

Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of

45˚ C. The outlet temp. of the water should drop by 15˚ C within a hour, The water cooler should be comprising of Rupees Forty Eight Thousand Seven

hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats, relay Hundred Eighty Three Only

etc. complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel.

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Supply, Installation, Testing & Commissioning of following size of Grid Tied Solar Power Plant with

Solar Panels (ALMM approved): Frame Material : Anodized Aluminum alloy Frame With Twin Wall Profile, Front Cover : High

Transmission Low-Iron Tempered Glass (AR Coated), High efficency and positive power tolerance Pmax: 0/+5, Module

Efficiency should be approx. 18%-21%, Normal operating temperature 45'C, Junction Box with Waterproof IP67 & MC4

Compatible and Enclosed with Bypass diodes, 100% Electroluminescence test to ensure error free Modules, Thep. temp. co-

Rupees Fifty Thousand Ninety Six

190 20.00 efficient of the PV module shall equal or better than -0.45%/degree C. Solar PV modules of minimum fill factor 75% to be KV 50,096.00

used. Unit Production:- 4 to 5 Unit /kw /day (Actual)(1Year Avg) With 10 year Product warranty and 25 year Linear Power

Solar Inverter: MPPT Range: 80-1000 V, Max efficiency: 97.5% - 98.9%, O/p Frequency: 50/60Hz, Operating Altitude (m)

≤4000, O/p Power Factor: ~1, O/P THDi: <3%, Operating Tempreture Range: -25~60°C, Anti-islanding Protection: (C ) Grid

Tied Solar Power System: 11 - 25 kW (3 - phase)

Supplying, erecting, testing, commissioning approved make M.S. Polygonal High Mast Pole having following general

(a) Polygonal Section fabricated from M.S. Plate confirms BSEN 10025 & Hot deep galvanized minimum 65/86 micron (as per

IS 2629 /1985) Lantern carriage with ring and rubber lines for erection of luminaries of suitable site. (b) Maximum telescopic

section not more than four

(c) Double drum gear pipe motorized winch with 6mm dia S.S. Rod (For 16 mtr and above size) (d) Approved make L.E.D.

Rupees One Lac Sixty Seven

aviation light = 1 No. Lightening arrestor = 1 No. with necessary wiring of 2.5 sq.mm 5 core ISI copper cable Unarmoured. (e)

191 5.00 Nos 1,67,104.50 Thousand One Hundred Four and

Bottom most section suitable for mounting reversible motor and switchgears having door not more than 1400mm x 300mm

with waterproof gasket & hinges & locking arrangement. (f) Pole structure comprises suitable size of reversible motor, cable

and necessary switchgears with control panel. (g) bottom section shall have suitable size of thickness supports ribs

foundation bolts nuts etc. (h) Item not comprises the cost of lanterns. (i) Necessary Cement Concrete foundation as per IS

including testing & commissioning of the entire structure for following size of High Mast poles [1] High Mast 12 Mtr. TOP A/F

105 mm, BOTTOM A/F 360mm, No. of Sec. No. - 1, Bottom Thickness - 3 mm, Size of Base Plate - Dia 520 mm x 20 mm thick,

Foundation Bolt Size M24 x 850 mm, Qty - 6 Nos., Suitable for mounting Fitting of Light - 6 Nos.

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with

Rupees Seven Thousand Three

toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

192 30.00 Nos 7,322.50 Hundred Twenty Two and Fifty

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown.) (B) Flood Light (IP-65), Surge protection -

4KV integral and ,Light must have 440VAC line supply with over-voltage protection. (ii) above 48 to 60 Watts Cat-III

Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type Rupees Six Thousand Five Hundred

terminal and arrangement for cable termination to be erected With Suitable foundation (Included) as per details given by Fifty Four and Ninety Paise

manufacturer considering site requirement. (B) 4 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M16 Bolts and 450mm long J-Bolt.Approx weight 37 kg [6-1-4]

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

Rupees Six Thousand Three

194 20.00 CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings Nos 6,307.45

Hundred Seven and Forty Five Paise

required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown.)(C) Post Top Lantern LED fitting comprises of

finish cast aluminum spigot and spun aluminum canopy fixed with opal polycarbonate, pipe arrangement for vertical

mounting driver and accessories wired upto terminal block.IP 65 (II) 40W Cat-III [2-17-2]

Designing, providing, making and erection of theme based Selfie Points model/ sculpture with internal MS fabricated

structure, using high grade FRP ISO resin, matting, cobalt, catalyst, wax polish and natural look painting. Lifting, Placement &

Fixing with all required welding, equipments, DG set, tools, crane, scaffolding at site as per the requirement Work complete

including all type of material, fittings , fixtures, Finish, loading , unloading , transportation, , all leads ,accessories, all floor

all levels, all heights , etc complete as per drawings ,specifications & instruction of Client. The Details of the Theme, Design,

Drawing, Subject of Art , Sculpture , etc whatever in the scope of the project has to be proposed by the Bidders in the form

of Drawing , Rendered Image etc in Soft Copy as Well as Colour Printed Format , Prototype model for the approval of Client.

And the same shall be executed as per final selection and decision of the client. B. PROCESS OF WORK Rupees One Lac Thirty Thousand

Modeling: Clay and pop Modeling of the different components of the theme based model/ sculpture Material specifications: Five Hundred Thirty Only

Metal Armeture, Clay, Pop etc.. resin –Ruia make c) Fiberglass woven roving – density 610gm/cc d) Hardener Catalyst 2%

conc. and accelerator for setting FRP Casting : FRP Casting : Fiber glass casting of the theme based model/ sculpture a) Fibre

glass chopped strand (matt) -450gm/m2 of Benani/Vetrotex make b) General purpose (G.P) polyester resin –Ruia make c)

Fiberglass woven roving – density610gm/cc d) Hardener Catalyst 2% conc. and accelerator for setting Colouring and PU

coating: Colouring and PU coating: Applying out door colours with spray painting to give realistic look of the theme based

model/ sculpture and also PU coating to protect from weather effect

• Material specifications: Thinner based automotive out door paints with matt finishing UV coating with PU.

Information Panel - Providing and fixing of Wooden made Informative panel boards having 20-25 mm thk wooden plank of

different sizes and shape as per Experts deatiled information and drawing, coated with Spar Varnish of approved make and

Text written with approved colour of Epoxy paint with arrangement of necessary holes, Rod, angle, joinery etc. complete. It

Rupees Twelve Thousand Six

196 30.00 allows to fix on holes, as a stand alone component in cast in site RCC pedestal with necessary respective provisions of sqm 12,625.00

Hundred Twenty Five Only

hanging and fixing materials. It allows for enough sturdy arrangements during fabrication and fixing. It shall be neatly

cleaned and decorative as per detailed architectural drawing and up to the level of satisfaction of Architect / Engineer in

charge. Contractor shall provide font size with approved colour as per architect satisfactor in .cdr files

Providing and fixing of Wooden made DIRECTIONAL SIGNAGE boards having 20-25 mm thk wooden plank of different sizes

and shape as per Architectural deatiled drawing, coated with Spar Varnish of approved make and Text written with

approved colour of Epoxy paint with arrangement of necessary holes, Rod, angle, joinery etc. complete. It allows to fix on

Rupees Eighteen Thousand Six

197 27.80 holes, as a stand alone component in cast in site RCC pedestal with necessary respective provisions of hanging and fixing Sqm 18,685.00

Hundred Eighty Five Only

materials. It allows for enough sturdy arrangements during fabrication and fixing. It shall be neatly cleaned and decorative as

per detailed architectural drawing and up to the level of satisfaction of Architect / Engineer in charge. Contractor shall

provide font size with approved colour as per architect satisfactor in .cdr files

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

SIGNAGES:- Providing and fixing Wall Mounted Signage Panel - mounting frame system of bellow mentioned sizes, as per

artwork design intent made of 5 mm thick Aluminium plate sign panel with chamfering / bevelling / edge finish as per final

detail. The sheet sides turned to secure the frame as mounting surface as shown in the fixing detail drawing. Mounting

frame fixed to sub surface (panelled wood / dry wall / dry clad stone / masonry) with 3 (mm) SS (grade 304) keyhole hook

plates, with SS (grade 304) Allen bolts and VHB tape/silicon adhesive as shown in the drawing. Sign facia and mounting

frame to be PVDF coated in specified colour. Sticker graphics printed with UV cured ink on Optically Clear Vinyl or equivalent Rupees Twelve Thousand Six

to be pasted on the sign panel, as specified by the manufacturer of the vinyl and by a team certified by the vinyl Hundred Twenty Five Only

manufacturer. All dimensions and values mentioned below are in millimetres, unless otherwise specified. All welded joints

have to be continuous, levelled by grinding and buffed to make it appear seamless before the surfaces are coated with

PVDF. Signages to be as per design intent drawings shared by Architect and engineer in charge. The signage shall have

provisions for backlit illumination as per requirement mentioned below. Signage S3A Location: Corridor way finding, Height

in mm: 200mm, Width in mm: 610mm, Material: Aluminium, Wall Mounted, backlit illumination: No

Development of flower beds, Tree Plntation, Exotic Trees, Etc. at the location as per drawing including required excavation

of area up to 150 to 200 mm depth as per requirement & disposal of the same out side premises, removing of weeds,

cleaning, spreading garden soil, manure, fertilizer & mixing the same, applying antitermite insecticides, planting plants, Rupees One Hundred Ninety Five

saplings as required, watering and maintaining the flower beds for a period of 24 months. ( 2 years) This includes watering, and Sixty Eight Paise

fertilizer, spraying pesticides and replacing dead plants (if any) with new ones, etc. complete as per instruction of engineer

incharge 1) Areca palm - 1.5 to 1.8m

200 50.00 2) Bottle palm ht. 210-240 cm bottom girth 30-35 cm well developed in big HDPE bag Nos 353.50 Rupees Three Hundred Fifty Three

201 30.00 3) Polyalthia longifolia (Ashok) of height 180-195 Nos 101.00 Rupees One Hundred One Only

202 1,000.00 5) Dracaena Marginata -30cm Nos 47.62 Rupees Forty Seven and Sixty Two

203 1,000.00 6) Fountain Grass Nos 25.25 Rupees Twenty Five and Twenty

204 100.00 7) Ficus bengalensis krishna of height 75-90 cm Nos 121.20 Rupees One Hundred Twenty One

205 60.00 8) Euphorbia caracasana (bronze colour leaves) of height 60-75 cm Nos 40.40 Rupees Forty and Forty Paise

206 1,000.00 9) Hibiscus rosasinensis of height 45-60 cm Nos 35.35 Rupees Thirty Five and Thirty Five

207 1,000.00 10) Tecoma gaudichaudi of height 45-60 cm Nos 35.35 Rupees Thirty Five and Thirty Five

208 10.00 11) Golden Bottle brush Topairy - 115 to 180 cm Nos 983.49 Rupees Nine Hundred Eighty Three

209 12.00 12) Mascarena palm - 150-180 cm Nos 1,863.45 Rupees One Thousand Eight

210 12.00 13) Bismarckia Palm - 115 to 180 cm Nos 1,956.62 Rupees One Thousand Nine

211 15.00 14) Ficus Nuda Topairy 180 to 210 cm Nos 2,619.18 Rupees Two Thousand Six Hundred

212 125.00 Supplying and Filling landscape area site with select soil as directed by architect for Lawns and Plantation Cum 1,136.25 Rupees One Thousand One

Providing, and laying of good Garden earth and manure (composition of 50% ORGANIC MANURE + 50% LOCAL SOIL ) (AS PER

SPECIFICATIONS), all of good quality, and laying in slope/ mound as per site condition & as directed. Soil shall be provided by

the contractor from an approved location. The contractor has to insure that the soil should be fine in texture, free from

stones, gravels, plant roots, branches and any other unwanted material, if any. Transportation of soil upto the desired Rupees One Hundred Fifty One and

location/ locations at site shall be under contractor’s scope. Other required tools & tackles to be arranged by contractor. Fifty Paise

Spreading shall be done as desired level as per the drawing given. Consider an even fill of depth as per

specification/Drawing.

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Providing, and laying of good Garden earth and manure (composition of 50% ORGANIC MANURE + 50% LOCAL SOIL ) (AS PER

SPECIFICATIONS), all of good quality, and laying in slope/ mound as per site condition & as directed. Soil shall be provided by

the contractor from an approved location. The contractor has to insure that the soil should be fine in texture, free from

stones, gravels, plant roots, branches and any other unwanted material, if any. Transportation of soil upto the desired

214 500.00 Cu.m 202.00 Rupees Two Hundred Two Only

location/ locations at site shall be under contractor’s scope. Other required tools & tackles to be arranged by contractor.

Spreading shall be done as desired level as per the drawing given. Consider an even fill of depth as per

specification/Drawing.

SWEET GARDEN SOIL

Construction of ELECTRICAL & ELV chamber of size 1200x1200x1800mm (1600x1600x2200) mm including excavation,

backfilling, watering, soling, compaction, Reinforcement, Rungs etc. complete. It includes R.C.C work of M-30 for walls, top

and bottom slabs, also having 100mm thick PCC in M-15 at bottom level. It shall be plastered with 15mm thick Plaster with Rupees Five Thousand Two

215 5.00 neat coat in CM 1:3 on internal including water proofing and outside of chamber with 20mm thick sand faced cement plaster Nos 5,282.30 Hundred Eighty Two and Thirty

in two coat at all sides. Top shall be covered with Pre-Cast SFRC Solid MH cover with clear opening of 900x900mm with Paise

frame and cover bearing load min. 25t and size as Mentioned in Drawing. It shall be completed with all respect in ture line

level, plumb with neat & clean surface as per coordinated infrastructure detail drawing up to the level of satisfaction.

NAME OF WORK: Funath Mahadev, Bardo- Eco Circuit

Qty. Description Unit Total Rate Rate in words Total Amount

Qty. Description Unit Total Rate Rate in words Total Amount

Construction of ELECTRICAL & ELV chamber of size 600x900x1200 (1000x1300x1450)mm including excavation, backfilling,

watering, soling, compaction, Reinforcement, Rungs etc. complete. It includes R.C.C work of M-30 for walls, top and bottom

slabs, also having 100mm thick PCC in M-15 at bottom level. It shall be plastered with 15mm thick Plaster with neat coat in

Rupees Three Thousand Six

216 5.00 CM 1:3 on internal including water proofing and outside of chamber with 20mm thick sand faced cement plaster in two coat Nos 3,666.30

Hundred Sixty Six and Thirty Paise

at all sides. Top shall be covered with Pre-Cast SFRC Solid MH cover with clear opening of 900x900mm with frame and cover

bearing load min. 25t and size as Mentioned in Drawing. It shall be completed with all respect in ture line level, plumb with

neat & clean surface as per coordinated infrastructure detail drawing up to the level of satisfaction.

I/ We am/ are willing to carry out the work at …………………% above/ below percent (should be written in figures)

Estimated Cost Amount: 7,18,68,265.22 Estimated Cost Amount:

Note - 1 All work shall be carried out as per Public Works Department Handbook and other specifications of Division or as directed.

Note - 2 All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor

Note - 3 Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and hold good for work under

Note - 4 To be continued on additional sheets, if found necessary