Pdg. Electrical work in HSDC in New Haryana Sectt. Bldg., Sec.-17, Chandigarh.

Amount

(Upgradation of SNMC iNOC) Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 1.50 Sqmm(1/1.40mm) HSR No. 23.5.6.1

1 run of Size 2.50 Sqmm(1.1.80mm) HSR No. 23.5.6.2

1 run of Size 4 Sqmm(1/2.24mm) HSR No. 23.5.6.3

Supply and erection of MS conduit pipe 1.6 mm thick , ISI marked surface/recessed in slab/wall/ceiling etc. including cost of MS bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. MS Pipe of 20 mm dia. HSR No. 23.6.6.1

MS pipe of 25 mm dia. HSR No. 23.6.6.2

Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia. HSR No. 23.7.6.2

Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. TRIPLE POLE MCCB 125 to 160 Amp HSR No. 23.22.1.4

TRIPLE POLE MCCB 200 to 250 Amp HSR No. 23.22.1.5

4 pole MCCB 6 amp to 100 amp HSR No. 23.22.1.9

4 pole MCCB 200 to 250 amp HSR No. 23.22.1.11

Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 100 X 50 X 2 mm3 HSR No. 23.23.6.1

MS perforated cable tray painted with powder coating 200 X 50 X 2 mm3 HSR No. 23.23.6.2

Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 3 Modules HSR No. 23.8.10.2

6 Modules HSR No. 23.8.10.4

8 Modules HSR No. 23.8.10.5

12 Modules HSR No. 23.8.10.6

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 5 amp 1 way switch HSR No. 23.8.11.1

15 amp 1 way switch HSR No. 23.8.11.3

5 amp Socket HSR No. 23.8.11.4

15 amp 6 pin Socket HSR No. 23.8.11.5

Step type Fan Regulator 2 modules 300 watt HSR No. 23.8.11.7

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 8 way ( 8 incoming 3phase*8 outgoing) HSR No. 23.22.4.7

Supply and erection of miniature circuit Breaker/isolator 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole HSR No. 23.22.5.1

40 amp to 63 amp. MCB's FOUR POLE HSR No. 23.22.5.8

Supply and erection of suitable compression type brass cable glands for underground Cable :- 25 sqmm to 50 sqmm Cable 2 to 4 Core HSR No. 24.2.7.3

Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 35 sqmm HSR No. 24.2.8.6

Supplying and drawing of 1 no UTP 4 pair CAT 6a LAN Cable in the existing surface/recess MS/PVC conduit as required HSR No. 23.23.10

EARTHING AND LIGHTENING ARRESTOR Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required. HSR No. 24.1.4

Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. HSR No. 24.1.5

Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required. HSR No. 24.1.9

Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material. HSR No. 24.1.10

(Upgradation of BMS System in SDC Area as well as in SNMC Area) SITC of Intelligent 2 Reader TCP I/P Controller In proper housing on-board buffer memory of up to 50000 transaction and should have cardholder database of 2,00,000 per controller, with Secured OSDP, IPv4 & IPv6, with on board support for the storage of biometric templates. The controller should be intelligent to take decision in offline mode when communication link is not available, CPU with 32 Bit Micro controller, On-board Ethernet 10/100Base-T port, Firmware stored in 8 GB flash memory, Support protocols like TCP/IP IPv4 & IPv6, SNMP, HTTP, FTP, NTP, SSL, support seamless integration with Building management system and shall generate trap alarm by utilizing the Simple Network Management Protocol (SNMP) or MODBUS protocol, 30 time zones, 250 time zone access groups. LED indications to monitor reader & lock activity status, optically isolated inputs for 2 Door Sensors, 2 Exit Switch, 4 General Purpose Digital inputs, 4 general-purpose relay outputs.Enhanced anti-pass back capabilities, Advanced Encryption Standard (AES) 128-bit algorithm for communications, 30 week off groups of access and 10 holiday groups with minimum of 30 holidays per group. CE certified. MS powder coated enclosure and power supply with 13.8V DC/ 5 amp rating with provision to connect a 12V/7.2 AH battery for operational battery backup. The Access control software shall be server client base and shall be able to support concurrent users simultaneously and system compatible with Mifare and Proximity. Make:- Spectra / RBH / Gallagher NS-1

SITC of PC, 8 GB RAM, 160 GB HDD with Keyboard & Monitor & CD -ROM Drive (Vendor to consider better Specs if required as per their Solution) Make:- Dell /HP/ Lenovo NS-2

SITC of Contactless Smart card reader (OSDP) support 125KHz, ASK, 13.56MHz, IS0/IEC 14443A reader range upto 5cm with Tri Color LED indication, BLE supported, UL94 Polycarbonate and IP65 rating. Make:- Spectra / RBH / Gallagher NS-3

SITC of IP and proximity based Biometric finger scan print reader, shall have a CPU with 32 Bit Microcontroller, 8 GB data flash memory, RAM of 2MB capacity, fingerprint module with 1.0 GHz CPU, 32 bit, Dedicated ARM based DSP processor with 256 bit AES fingerprint data encryption, verification time of less than 0.33 sec for 1:1 match, and less than 0.4 sec for 1:1000 match, capacity to handle 250,000 users database, store up to 25,00,000 finger print templates (10 fingerprint templates per user), storage of 500,000 time stamped events, LAN, inbuilt WiFi, Supports TLS 1.2 Encryption, inbuilt atleast more than 3.5” Color capacitive touchscreen, support displaying of the company Logo a screen saver files, Inbuilt VGA camera to capture user photograph on user specified events, inbuilt speaker with live audio prompt messages, CE certified. Make:- Spectra / RBH / Gallagher NS-4

SITC of NTS (Non Touch Switch) Exit Push Button (infrared detect) for Door Release, SS Finish. The NTS housing shall be fabricated from 304 Stainless steel. Make:- Spectra / RBH / Gallagher NS-5

SITC of Electromagentic Lock ( 600 LBS - Single Leaf) with Magnetic Contacts and necessary accessories. NS-6

SITC of Power Supply Unit (For Above Lock) NS-7

SITC of Emergency door switch Release Box NS-8

SITC of Copper Cables of following sizes 8 Core 1 Sq. mm ATC Shielded Un -Armoured FRLS Cable NS-10 i)

4 Core 1 Sq. mm ATC Shielded Un-Armoured FRLS Cable NS-10 ii)

3 Core 1.5 Sq. mm ATC Shielded Un-Armoured FRLS Cable NS-10 iii)

Providing and fixing fire rated air flow Aluminium Grill of following sizes complete in all respect 600mm X 600mm NS-11

SITC of DCIM to control common alarms, monitoring of Temperatures, humidity, UPS, Raw Power, Generator and diesel Software Inventory / Asset Manager Capacity ManagerThermal Systems Manager / Cooling Management Site Manager Power System Manager / SLD Vie Energy Insight. IMage recognition with iPAD App. 100% web based with no client installation at user end including CFD features. Procotol support of SNMP, Bacnet/IP, Velocity/IP, Modbus /IP.Data Collection Engine should be Dual Power and Dual Ethernet with managing 40 KVM sessions managing Servers and Network Console Server : 40 X 2Nos =80 Points or as per site NS-12 i)

Servers Back Machine Requirements: CPU: Quad-Core Intel® Xeon®, 2.6 GHz Memory: 32 GB, DDR3 ECC SDRAM Memory 1333 MHz Storage: 1TB 10K RPM Hard Drives Disk Throughput: >150 MB/s (Sequential) [Uncached] Network: Gigabit Ethernet

Operating System Window 2016 Enterprise with SP2 NS-12 iii)

Collection Engine Data Collection Appliance alongwith required cabling NS-12 iv)

(Pdg. CCTV System) Supply, installation, Testing & Commissioning of Fixed Dome Indoor 1080p True Day/Night Switching IP camera. Complete in all respect upto entire satisfaction Engineer in charge of works. Specification :- Image device/ Sensor - 1/3" Progressive Scan CCD/ Progressive Scan CMOS or Better Resolution - 2 Megapixel (1920x1080) or better Frame Rate upto 30 Fps or better Lens type - 3 to 9 mm auto varifocal lens motorized IR Light & Distance - Ir Range upto 30 mtrs or better Signal to Noise Ratio ->50db Minimum Illumination - 0.3Lx Color, IR LED ON 0 .0 Lux or better Day Night - Auto Day/ Night with switchable IR cut filter Video Compression - H.265, H.264, M-JPEG Camera Should have multiple Streaming- Min. Triple Edge Based Analytics like Motion Detection, Camera Tampering & Audio Detection Storage- SD card slot should be expandable upto 256 GB System Compatibility- ONVIF profile S&G Privacy Masking- Minimum 4 Privacy zones or Higher Protocols - IPv4/ IPv6, HTTP, HTTPS, TCP/IP, UDP, UPnP, ICMP, RTSP, RTP, SMTP, NTP, DHCP, DNS, DDNS Additional Features Noise Reduction - Digital Noise reduction on/off. WDR- 120dB WDR Alarm Input/ Output - 1 Alarm Input, 1 Alarm Output Audio Input/ Output - 1 Audio Input, 1 Audio Output Environment Operating Environment - Indoor/ Outdoor Operating Temperature -0C to 60C Ingress protection & Vandal resident Standards - IP66 or Better IK10 or better Certificates: UL, FCC, EN NS-1

SITC of Layer -2 Switch with Power on Ethernet (PoE) enabled, with 24 nos. 10/100 base Tx PoE port, 1 no. dual personality Gbe Port for copper/fiber uplink, 3.7 Gbps switching capacity, 2.7 MPPS forwarding rate, maximum power consumption 185 watt. (For All Floors) Make: Cisco / Extreme Networks / Juniper NS-4

SITC of 9U rack for switch Mounting with Fan and power Strip, PDU, Hardware Mounting Kit Make: Comrack /HCL /Valrack NS-5

Supply of CAT6 UTP 24 AWG Patch Cord - 1 mtr with cross separator , Manufactured from stranded wires for longer flex-life , Minimum length of 1m, and maximum length of 5m onforming to the following standards like EN 50173, ISO/IEC 60603-7 & 11801/IEC 60332-1, UL VW-1 Make R&M/Siemon/Corning NS-6

Supply of 24-port 19" 1 U jack panel which Should Be made of sheet steel 1.5 mm, Should be 19" 1U straight Patch Panel, 24-port,Should have integral cable management Metal shelf,Should accept Shielded as well as Unshielded jacks, Should have rear cable management shelf metallic powder coated Make R&M/Seimon/Corning NS-7

SITC of surveillance 4 TB Hard Drive for NVR of Seagate /WD NS-8

SITC of 5 mtr HDMI Cable NS-9

Supply of 55" LED Display, Resolution 3840 x 2160 )UHD), brightness (cd/m2) - 360, Digital-ATSC / Clear QAM, HDR 910 Pro / HLG), Audio Output - 10W + 10W, Speaker-2.0 Channel, HDMI in 2 (2.0), USB (2.0) with suitable controller for single view. Make- Sony / LG / Samsung NS-10

NOVEC FIRE SUPPRESSION SYSTEM SITC of Gas release panel-2 zone, 1 gas release circuits NS-1

SITC of Manual release switch for Gas Release NS-2

SITC of Abort switch for Gas Release NS-3

P/F of Placarts for information/instructions signs NS-4

SITC of 34 Litres Capacity Seamless Cylinder CCOE Approved, complete with valve assembly and pressure gauge with a safety burst disc and a safety cap. NS-5

SITC of 80 Litres Capacity Seamless Cylinder CCOE Approved, complete with valve assembly and pressure gauge with a safety burst disc and a safety cap. NS-6

SITC of 140 Litres Capacity Seamless Cylinder CCOE Approved, complete with valve assembly and pressure gauge with a safety burst disc and a safety cap. NS-7

SITC of NOVEC-1230(FK-5-1-12) for existing system and proposed system NS-8

SITC of Electric Control Head operated electrically from the Detection & Control System or locally with a manual lever on the control head. NS-9

SITC of Pressure Operated Control Head which allows for pressure actuation slave cylinders and is mounted directly on top of the slave cylinders valve. NS-10

SITC of Discharge Nozzles are designed to provide the proper flow rate and distribution of Novec-1230 to total flood a hazard area : 360 deg. NS-11

SITC of Master Cylinder Adapter Kit used to actuate the Slave Cylinder. NS-12

P/F of Discharge Hose, 1.5” (use with 34 Ltr. Cylinders) NS-13

P/F of Discharge Hose, 2” (use with 80 & 140 Ltr. Cylinders) NS-14

SITC of 2" Manifold Check Valve installed at the discharge manifold to allow removal of any NOVEC-1230 cylinder from the manifold while still retaining a closed system. NS-15

SITC of Flexible Actuation Hose (Pilot pressure is directed to a pressure operated control head on each cylinder valve using 1/4 inch actuation hose) NS-16

P/F of Manifold Supervisory Switch for indication of discharge of system NS-17

P/F of Cylinder Strap for 140 Ltr. Cylinder NS-18

P/F of Cylinder Strap for 80 Ltr. Cylinder NS-19

P/F of Cylinder Strap for 34 Ltr. Cylinder NS-20

P/F of Brass Male Tee NS-21

P/F of Brass Male Elbow NS-22

SITC of Schedule 40 Seamless ASTM 106 gr B, piping with fittings, rigid supports with angles,2 coats of Zinc primer & 3 coats of red Paint. NS-23

SITC of Manifold fabricated from seamless pipe Pipe (S) : M.S. Seamless To ASTM A-106, SCH. 80 Piping, fittings & supports, etc.2 coats of Zinc primer & 3 coats of red Paint. NS-24

FIRE ALARM SYSTEM SITC of Microprocessor based 2 wire fault tolerant, networkable type Fire Alarm / Detection Control Panel (having nos. of loops to suit minimum 20% extra over the nos. of fire detectors. The panel shall be able to give location of all fire / fault conditions of addressable units via the address codes. Further, the panel must be able to automatically switch ON/OFF respective control module when ever any alarm is triggered. The panel shall have rectifier, loop cards, minimum 160 characters LCD unit/ 5.7’’TFT to indicate Fire / Fault Signal with address and analog output, external/inbuilt printer to log all fire or fault events complete in all respects. The Panel Shall be sheet Steel power coated, sealed to IP30. The Panel shall have 20 Zones with individual LED Indicators, expandable to 80 LED Indicators. The Panel shall have 2 Serial Ports. The panel shall have a built in power supply, battery charger maintenance free battery capable of running for a minimum 24 hours operation complete as required. And conforming to BS5839 standards and Duly Approved by EN 54/UL/VDS as per specifications complete in all respect up to the entire satisfaction of Engineer-in – charge of work. Makes: Bosch FPA 4000 Series / Cerberus by Siemens, Honeywell Morley Zxe Series. NS-25

SITC of addressable multisensor detector with a combination of optical and thermal including base, auto addressing features as required. Detectors should have 2 as per NFPA 72 style 7 wiring requirements (one for incoming and one for outgoing line) for maintaining operational availability of all elemnets in the loop in the event of a short circuit and to meet style 7 requirements. High resistance to electromagnetic effects in accordance wiht EFSG agreement EFSG/F/97/005. EMC safety for detector shall be 50 V/m. shall be EN54/VDS/UL certification. (Detectors without inbuilt isolators may be considered with an additional isolator module after 20 devices) Make: Bosch FAP-440+T+FAA-440, Siemens Cerberus OH921+DB-11, Honeywell Morley HM-PTSE+B501. NS-26

SITC of addressable Heat Detector with fixed and rate of raise feature including mounting base with LED etc complete as required. Each detector should have 2 as per NFPA 72 style 7 wiring requirement (one for incoming and one for outgoing line) for maintaining operational availability of all elements in the loop in the event of a short circuit and to meet style 7 requirements. High resistance to eletrmagnetic effects in accordance with EFSG agreement EFSG/F/97/005. Detector should monitor electromagnetic interfarence and report to the panelcurrent and average values, EMC safety for detector shall be 50 V/m. shall be EN54/VDS/U: certification. (Detectors without inbuilt isoaltors may be considered with an additional isolator module per detector. (Make: Bosch FAH-440+FAA-440, Siemens Cerberus HI921+DB-11, Honeywell Morley HM-RHSE+B501, NS-27

Supply, installation, testing & commissioning of intelligent Analog Addressable type Manual Call Point having Surface or flush mounting option fully compliat to EN 54 having Rotary Decade switches for addressing with back box for mounting as required conforming to BS5839 standards and duly approved by EN54/UL/VDS required to complete the job in all respect up to the entire satisfaction of Engineer – in Charge of work. Makes : (Makes: Bosch FMM-325A-D, Siemens Cerberus HMS-S, Morley MI-MCP) NS-28

Supply, installation, testing & commissioning of Addressable Control Relay Module with flexible network structures with a maximum switching current of 1A @ 30V DC. Shall be EN54/UL/VDS Certification Makes :Bosch/ Siemens Cerberus / Morley NS-29

Supply, installation, testing & commissioning of Addressable Monitor Module for monitoring of a line with EOL resistor/ Potential free contact/voltage monitoring shall be EN54/UL/VDS approved. (In case of 2 monitoring features in one module (points) each point shall be consider separately for payment). Makes : Makes: (Bosch FLM-325-2I4, Siemens Cerberus HTRI-M, Morley MI-DMMI) NS-30

Supply, installation, testing & commissioning of Addressable Loop powered sounder with strobe/flasher complete with mounting base as required conforming to BS5839 standards and duly approved by EN54/UL/VDS required to complete the job in all respect up to the entire satisfaction of Engineer - in Charge of work. Makes: Bosch /Siemens Cerberus / Morley NS-31

SITC of Intelligent Analog Addressable type Response Indicator with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work Make: Bosch/ Siemens Cerberus/ Morley. NS-32

Supply Installation, Testing & Commissioning of Glow Type Exit Sign Board photo luminescent of size 300 mm x 250 mm x 1.5 mm rigid sheet signage containing Zink Sulphate as bare chemical class - I material PSPA fixed on 3 mm acrylic sheet on both side showing marking (running man, Arrow and Exit) and hanged with the ceiling with chain and fastener including cost of labour and material required to complete the job in all respect up to entire satisfaction of Engineer-in-Charge of work. Make: Bosch/ Siemens Cerberus/ Morley. NS-33

Wiring for Fire Alarm system with the following sizes 2 x 1.5 sq.mm of FRLS aroumred insulated copper conductor single core 1100 volts grade cables in existing surface as complete as required. Make Finolex/Havel/Polycab NS-34

Supply, installation, testing & commissioning of Power amplifier 260 watts Frequency response: 60 Hz to 15 khz (+1/3db), Inputs :XLR & phone jack , Input 1, Input 2-4, Impendence :20kΩ, Sensitivity : 1 V balanced , S/N >: >85 dB complete in all respect Make Honeywell/BOSCH/ Heinrich NS-36

Supply, Installation, Testing & Commissioning of 6W ceiling speaker 5inch with metal enclosure with Line Matching Transformer and tapping of 1.5 W / 3W and 6W. Make: Bosch / Honeywell / Heinrich NS-38

Supply, installation, testing & commissioning of 19 U Standard rack to place all Av equipment Make Valrack, Comrack,Hive Networks NS-39

SITC of Wiring for Fire Alarm system with the following sizes 2 x 1.5 sq.mm of FRLS insulated copper conductor single core 1100 volts grade cables in existing surface/recessed M.S. conduit etc. as complete as required. Make Finolex/Havel/Polycab NS-40

VESDA System SITC of Laser-Based Absolute Smoke Detection system with 1 pipe inlet, 500 m2 coverage; Wide sensitivity range - 0.025%–20% obs/m; 4 alarm levels ; High efficiency aspirator; Clean air barrier optics protection; Easy to replace dual stage filter; 3Nos of inbuilt potential free relay outputs;supports linear pipe length of 50m per pipe; supports 20 Nos of EN54 Class A sampling points, AutoLearn for automatic setup of alarm threshold, Referencing & Event log (min 18000 events); Approvals-UL, ULC, FM, ActivFire, VdS, CE , EN54-20 NS-42

SITC of Laser-Based Absolute Smoke Detection system with 1 pipe inlet, 250 m2 coverage; Wide sensitivity range - 0.025%–20% obs/m; 4 alarm levels ; High efficiency aspirator; Clean air barrier optics protection; Easy to replace dual stage filter; 3Nos of inbuilt potential free relay outputs;supports linear pipe length of 50m per pipe; supports 20 Nos of EN54 Class A sampling points, AutoLearn for automatic setup of alarm threshold, Referencing & Event log (min 18000 events); Approvals-UL, ULC, FM, ActivFire, VdS, CE , EN54-20 NS-43

VESDA ACCESSORIES SITC of EN approved power supply unit with 110/230VAC input and 18 to 29VDC output. The power supply unit has the following indications: OK - Green LED and Fault - Yellow LED NS-44

SITC of End Cap for large bore pipes, 25 mm NS-45

OTHER ACCESSORIES SITC of Sampling Pipe - 25mm OD, 18 to 21mm ID smooth bore PVC/UPVC/CVPC/ABS Plastc Pipe,(bidder to refer layout for calculation of pipe, cable and sensors) NS-46

SITC of 24AWG, 2 core twisted pair shielded cable (for connecting all VESDA detectors in loop for monitoring using VSM4 or integration with BMS/other third party system using MODBUS) with 25mm PVC Conduit. NS-47

SITC of 24VDC operated conventional Type alarm sounder with built in strobe light for alarm NS-48

SITC of Water Leakage & Detection System complete in all respect SITC of 2 Zone Water Leak Detection LCD Conventional Panel With Inbuilt Buzzer & Individual Zone ,Potential Free Contact for Connecting to the BMS System Panel has Battery Backup Facility , Common Hooter ,Common Relay out for Alram & Falut Relay output Extra. Make: Agni NS-49

P/F of WLD(Water Leak Detection) Cable. NS-50

SITC of 24VDC operated conventional Type alarm sounder with built in strobe light for alarm. Make: System Sensor NS-51

SITC of 24AWG, 2 core twisted pair shielded cable with 25mm PVC Conduit. Make: KEI/ Polycab/ Havells NS-52

Providing and fixing of Rodent Repellent system SITC of Ultrasonic Rodent Repellent Controller NS-53

SITC of Ultrasonic Rodent Repellent Transducers NS-54

Supply & laying of 25mm PVC FRLS conduit = 200 Mtr. NS-55

(Pdg. LAN System) Supplying and drawing of UTP 4 pair CAT 6A LAN Cable in the existing surface/ recessed steel/PVC conduit as required. 4 Pair CAT6 Unshielded, Twisted Pair (U/UTP) Cable 305 mtr per Box. Blue/Yellow in colour conforming to the following standards like ANSI/TIA 568 C.2, EN50173, IEC 11801 2nd ED, 700Mhz etc. in Cat 6 U/UTP LCS2 cable with 23AWG. Make : CORNING/ R&M /PANDUIT / SIEMON NS-1

Supplying, installing, testing and commissioning of 24 port Cat 6A patch panels available with block of four equipped with tool less IO, Rack Mountable. 19" Modular Patch Panel, loaded CAT6A U/UTP 24 port LCS2 rack mountable to be compatible in 4nos of 6 X RJ 45 Tool less connector U/UTP unit in a block complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer -in-charge of work. Make : CORNING/ R&M /PANDUIT / SIEMON NS-2

Supplying, installing, testing and commissioning of Cat 6A , Tool less Information outlet for Voice/Data. Cat6A U/UTP built in crimping hands-free, minimum 5 times reconnection possibilities. LCS2 Toolless RJ45 Information outlet where insertion test (in & out) must be 2500 times (I/O) along with front side Label holded and transparent shutter for category white in colour, including front plate and anodised GI box in concealed manner of adequate sizes,including all fixing accessories complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer -in-charge of work. Make : CORNING/ R&M /PANDUIT / SIEMON

Supplying, installing, testing and commissioning of following length of Cat - 6 patch cord. 10 Feet : CAT6A UTP 23 AWG Patch Cord - 3 mtr - Rack End. Factory crimped LCS2 Patch cord in Blue colour. Make : CORNING/ R&M /PANDUIT / SIEMON NS-3

Supplying, installing, testing and commissioning of following length of Cat - 6 patch cord. 16 Feet : CAT6A UTP 23 AWG Patch Cord - 5 mtr - Rack End. Factory crimped LCS2 Patch cord in Blue colour. Make : CORNING/ R&M /PANDUIT / SIEMON NS-4

Supply , Installation , testing & commissioning of UPVC Trunking 150X50mm Make MK/Legrand With Mouting Accessories NS-5

Supply Installation Testing & Commissioning of 6 core sm fibre cable (per meter) complete with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer - in - charge of work. Make : CORNING/ R&M /PANDUIT / SIEMON NS-6

Supply Installation Testing & Commissioning of 12 core sm fibre cable (per meter) complete with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer - in - charge of work. Make : CORNING/ R&M /PANDUIT / SIEMON NS-7

Supply Installation Testing & Commissioning of 24 port fibre LIU Loaded complete with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer - in - charge of work. Make : CORNING/ R&M /PANDUIT / SIEMON NS-8

Supply Installation Testing & Commissioning of 12 port fibre LIU Loaded complete with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer - in - charge of work. Make : CORNING/ R&M /PANDUIT / SIEMON NS-9

Supply Installation Testing & Commissioning of 3 Mtr fibre Patch Cord complete with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer - in - charge of work. Make : CORNING/ R&M /PANDUIT / SIEMON NS-10

Supply and erection of underground cable, loose in existing pipe or trenches complete with necessary connections. 35 Sq. mm 3.5 Core Cable NS-11

ParknSecure India Pvt ltd