Repairing work of WTP at Kothariya HW & Makhavad SHW under Lodhika Group M & R Programme.

Gujarat Water Supply & Sewerage Board

Name of Work: Repairing work of WTP at Kothariya HW & Makhavad SHW under Lodhika Group M & R Programme.

Ta.:- Lodhika Dist.:- Rajkot

Sr. No. Particulars Quantity Rate / Unit Place of Delivery

Nill Gujarat Water Supply & Sewerage Board

C O N D I T I O N S

[ 1 ] Contractor shall have to buy & bring ordinary Portland Cement as per I.S. 12269 - 1967 or its latest revision with I S I Mark from open market and produce the bill of purchase along with necessary test certificate at the time of claiming Running Account Bills. The Cement shall be tested in the Departmental Laboratory at the cost of the Contractor whenever instructed by Engineer-in-charge. No extra cost should be claimed by the Contractor for the same Ta.:- Lodhika Dist.:- Rajkot

[ 2 ] All materials except shown in Schedule-"A" and required for the work shall be provided by the Contractor

[ 3 ] The Contractor shall arrange lifting and carting of materials from Departmental Store to site of work which includes loading, unloading and proper stacking of materials

[ 4 ] The Contractor has to provide safe store before taking delivery of materials.

[ 5 ] The materials not shown in Schedule-"A" will be issued at issue rate or market rate which is on higher side if the same is available with the Departmental and if found in the interest of work.

[ 6 ] Any material remaining un-used at the time of completion of work or termination of contract shall be returned to departmental store in perfectly good condition at Contractor's cost. When materials are supplied free of cost for use in work and surplus and unaccounted balance thereof are not returned to the Department. Recovery in respect of such balances will be effected at double the applicable issue rate of the material or the market rate whichever is higher.

Signature of Contractor Deputy Executive Engineer

P.H.S.Sub.Dn.No.2

I/we am/are willing to carry out the work at ………..% above /below…………………………………………………………………………..

percentage above /below (Should be written in figures and words) tendered the Rate mentioned above.

Amount of my/our tender works out as under.

Estimated Amount put to tender Estimated Amount put to tender

Add………………… % Deduct……………………… %

Above Rs………………………… Below Rs………………………

Total Rs………………………………….. Total Rs…………………………..

( Rs. in words ……………………….. ( Rs. in words ………………………..

Gujarat Water Supply & Sewerage Board

M&R to Lodhika Group RWSS

Ta.:- Lodhika Dist.:- Rajkot

Name of Work: Repairing work of WTP at Kothariya HW & Makhavad SHW under Lodhika Group M & R Programme.

Qty Item Rate Per Amount

Item No.1 Removing of existing pipeline incl. removal of specials, valves, jointing material including carting and stacking of removed material from site of work to the departement store as direcated excl.excavation and refilling.

Item No.2 Manufacture, Supply & Delivery of Electric Resistance Welded (Up to 400mm)/Submerged Arc Welded(Above 400mm) M.S.Pipe having beveled ends plate or coil conforming to IS- 3589-2001 or its latest revision/ ammendment for following thickness outside diameter at GWSSB store or site anywhere in Gujarat State including all taxes, insurance,transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to Departmental stores,stacking etc. all complete. (Rate for MS Pipe based on the ex. works price of HR Coil as Rs.58500.00 per MT-without GST (Above 3.15mm to 10 mm) & Rs.59000.00 per MTwithout GST (Above 10 mm) as on Jan-23.( WP I Index of H. R Coil of Dec-22 is 144)

Item No.3 Lowering, laying, Jointing & welding in position to correct line & level M.S. Pipe with outer gunniting & inside lining/Epoxy painting on pedestal or chairs upon prepared formation or prepared bedding in trenches the rates include conveyance from store to site of work loading, unloading, joint plastering, hydrotesting etc.complete.

Item No. 4 Providing and casting in situ C.C. in grade M-15 (approx. corresp. to prop. 1:2:4) (proportions as per mix design or as per Table 9 of IS456 2000 in masses by weigh batching ) using granite, quartzite trap metal of size 6 mm to 20 mm for RCC work, including scaffolding centering, form work, needle vibrated consolidation, curing comp. up to 6 meter depth or height (excluding cost of reinforcement and neat finishing) with centering and shuttering/deshuttering etc. comp. for structure for other than water retaining.

10.25 Footing for column or foundation (with form work) 4906.00 Cum 50299.28

240.00 Item No.5 :C.I. Gates: providing fabricating and fixing /installing C.I. gates of size as per design with operating handle etc.for by pass arrangement with ISI Mark 82.00 Kg 19680.00

Item No.6 :Providing, supplying & fixing Sluice valve PN 1.6 instead of filter gate including cost of valves/specials/nut bolts/rubber packing / key to operate valves incl. all labour, equipments, materials required.

1.00 Item No. 7 :Chemical Dosing Pump: incl. Tank: Providing and installing chemical dosing metering pump model V-12 with PP head and flow of suitable size For PAC Dosing 12090.00 No 12090.00

Item No. 8 : M. S. Specials flanged ends Above 300 mm. dia.

200.00 for fixing of 350 MM Sluice valve 98.00 Kg. 19600.00

1.00 Item No. 9 : Air Blower : Providing,installing & commissioning Air agitation system including blowers(40 HP), piping and valve arrangement Etc, As per design for all beds 345963.00 Set 345963.00

Item No. 10 : Providing, Supplying & installing Vacuum Control Direct wall mounted gas chlorinator including necessary fittings, installation and commissioning of plant incl. Clamp, copper pipe, ferule filter & control valve with injector.(Kothariya HW and Makhavad SHW

150.00 Item No. 11 : Providing laying and Jointing in true line and level 25 mm dia UPVC PIIPE(SCH 40) for cold water including fittings make PRINCE/SUPREME/ASTRAL/FINOLEX or equivalents as approved by EIC,Pipe shall be concelled as directed including necessary fittings etc.including testing of pipe and joints and fixing the same with adhesive solvant,including cost of all materials. 90.93 Rmt 13639.50

Item No.12 :Laboratory Instruments:

(1) Jar Test Apparatus

Providing, Supply and installation of laboratory Jar Test Apparatus suitable for simulating coagulation and flocculation processes in water and wastewater treatment. The apparatus shall consist of 4 stirring units, each with 1-liter capacity beakers, variable speed control, digital RPM display, and built-in timer. Each paddle shall be made of stainless steel with adjustable depth and shall provide uniform mixing. The base shall have illumination for clear observation of floc formation. The unit shall be supplied with a powder-coated mild steel or stainless-steel body, along with standard accessories and calibration certificate traceable to national standards. The equipment shall be suitable for use in NABL-compliant laboratories or government water testing labs.With testing, and demonstration at site. The work shall be carried out as per manufacturer’s specification and as directed by the Engineer-in-Charge.(With NABL Certificate)

1.00 Glass ware Item : 1000 mL Glass Beakers, Graduated Cylinders: Both 200 mL and 1-Liter graduated cylinders ( plastic for durability) , Syringes: Various sizes of syringes (e.g., 1 mL, 5 mL, 20 mL - disposable) without needles , Stirring Rod 115700.00 No 115700.00

(2) Laboratory Instruments

1.00 (A) Providing and supplying microprocessor based digital pocket PH tester. 7217 No 7217.00

1.00 (B) Providing and supplying microprocessor based digital pocket TDS tester. 7506 No 7506.00

3.00 [C] Providing & supplying Chloroscope 0.5 ppm including testing materials. 1443 No 4329.00

1.00 (D) Providing & Supplying Safety Kit for chlorine cylinder - 900 kg toner. 46191 No 46191.00

2.00 (E) Providing & Supplying Safety Kit for chlorine cylinder - 100 kg toner. 40418 No 80836.00

Item No.13 : Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.

21.00 (i) Not exceeding 3 Sq.M. in area. 199.24 Each 4184.04

7.80 Item No. 14: Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window 1696.73 Sqm 13234.49

5.34 Item No. 15: Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium frame for ventilation 1163.92 Sqm 6215.33

32.22 Item No. 16:- Providing and fixing hard drawn steel wire fabric 75mm x 25mm mesh or weight not less than 7.75 kg. per Sq.M. to window frames etc. including 60 x 20mm beading of teak wood. 770.07 Sqm 24811.66

5.67 Item No. 17:- Providing and fixing 30mm thick factory made moulded door shutter wood free consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails, M.S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick High Density EPS conforming to IS 4671-1984 bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC sheet with 2,4,6 raised panel design in different plain and/or prelim colours after routing the moulded design on one side and 2mm plain and/or prelim PVC sheet on other side of the EPS. The edges of panel to be sealed with lipping of 10mm wide PVC sheet batton (made by sticking 2 PVC rigid foam sheets of 5mm thickness using PVC solvent cement) and stiles 25mm (5mm x 5) thick and 30mm width PVC sheet fitted along M.S. tube for lock provision and for lock height 5mm thick PVC sheet of size 150mm x 100mm fixed with upper and lower face of inner side of EPS panel etc. complete as per direction of Engineer in charge manufacture's specification and drawing 1960.00 Sqm 11113.20

Item No. 18:- Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt, LED LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates) (NOTE: Below description have shown ranges of Wattage capacity of LED fittings. The Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver 138+26

25.00 (i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet Cat-III 164.00 Each 4100.00

Item No. 19:-Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K, Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %).CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( fittings required LM-79 & LM-80 certificates)(NOTE:Below description have shown ranges of Wattage capacity of LED fittings. The Engineer incharge may select any wattage capacity between the ranges shown.) (2052+128)

17.00 (A)steet Light (IP-65), Surge protection -4KV,integrak and Light must have 440VAC line supply protection. above 24 to 36 Watts, Cat-III 2180.00 Each 37060.00

1.00 Item No. 20:-Providing and fixing wash basin with single hole pillar tap with tap with C.I. or M.S. brackets painted white / colour including cutting holes and making good the holes including piller tap bottole tap stop code. PVC connection and PVC wash pipe complete(A) Vitreous China (ii) Flat back wash basin 550 x 440 mm size.(i) In white colour 1640.68 Each 1640.68

4.83 Item No. 21:-Providing and fixing standard steel doors inwalls with 16 x3.15 mm longs 10 cm. lomg embeded in cement concrete block 15 x 10 x 10 of 1:3:6 (1- cement : 3- coarse sand: 6- graded stone aggregate of 20mm size) including cost of door and including cutting, hoisting,fixing in position with s.s stopper 20cm long ,SS Aldrop 25cm long, SS tadi, two SS handle 15cm long, SSdoor stopper, Three SS hinges and applying apriming coat of red lead paint. 3983.98 Sqm 19242.62

Item No. 22:- Providing Supplying and Installing Rotationally moulded HDPE storage tank of approved make including all taxes transportation octroi etc. Complete.But Exculding of GST.(With ISI Mark)

50.00 Item No.23 :-Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-sand) 140.51 Sqm 7025.50

(ii) with a floating coat of neat cement slurry. 52.50 Sqm 2625.00

Total Rs. 2,365,807.31

I/We am/are willing to carry out the work at % above/below percentage (should be written in figure & words) above/below the estimated rates mentioned above. Amount of my/our tender worked out as under :- Rs. Add.% Rs. Deduct% Above Rs.____________ Below Rs. __________________ Total Rs.______________ Total Rs. ___________________ (In words Rupees__________ (In words Rupees ________

Signature of Contractor Deputy Executive Engieer Executive Engineer

P.H.S.Sub.Dn.No.2 P.H.W. DIV