Loading
Loading…
Loading…
Tender Value
₹46,500
Closing Date
3 Aug 2026, 6:55 pm
Executive Engineer
Executive Engineer Mechanical and Hospital Division Baramulla
Routine / Corrective maintenance to DRR No. 185 W/S pertaining to Mechanical and Hospitals Sub Division 1st Baramulla
2026_PWDJK_317480_1
MHDB/TS/2026-27/42
Open Tender
Repair and Maintenance Works
Percentage
10 days
M and H Sub-Division 1st Baramulla
Please refer Tender documents.
9 documents required · 9 mandatory
₹200
Accounts Officer, M and HED Kashmir
23 Jul 2026
23 Jul 2026
4 Aug 2026
23 Jul 2026
3 Aug 2026
23 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Repairs to steering worm wheel by way of remetaling , turning and finishing it to required size , repairs to key washer for proper fitment of worm wheel and fabrication of lock bolt for steering pinion. | - | Job | - | - |
| 2 | P/F of choke cable as per sample | - | Job | - | - |
| 3 | P/F of fan belt- A51 | - | No | - | - |
| 4 | Providing and fitting of Hose pipe set complete with suitable clamps, including removal of the damaged hose pipes, tightening of all connections, leak testing and satisfactory commissioning. | - | Job | - | - |
| 5 | Repairs to Self starter and Alternator assembly by way of dismantling from the machine, cleaning of internal components, rectification of electrical faults, replacement of damaged bushes, carbon brushes, worn-out wiring and electrical connections wherever required. The job also includes providing and fitting of battery connection cables complete with thimbles and terminals, reassembly, testing for satisfactory performance and refitting to the machine. | - | Job | - | - |
| 6 | Repair, Calibration and performance testing of Fuel Injection Pump by dismantling the pump from the machine and shifting it to an authorized/local workshop. The job includes replacement of 04 Nos Nozzle elements, delivery valve, fuel pump repair kit, seals and other consumables as required, calibration on a fuel injection test bench, injector pressure testing, refitting of the pump assembly to the machine and satisfactory trial run. | - | Job | - | - |
| 7 | Repairs inside the Gearbox casing by way of removal of damaged studs on the sides of gearbox casing and providing and fitting the same with new ones along with drain plug and joint gasket on the top of the casing of gearbo and refitting the gearbox casing with rest of transmission system for perfect alignment, complete in all respects. | - | Job | - | - |
| 8 | Providing and replacing Engine Oil by draining out the old/stale engine oil and filling 18 litres of fresh Engine Oil (20W40) of approved make, including supply and fitting of Engine Oil Filter, cleaning of filter housing, checking for oil leakage and testing of the engine after completion, complete in all respects as directed by the Engineer-in-charge. | - | Job | - | - |
| 9 | Providing and replacing Gear Oil by draining out the old/stale gear oil and filling 16 litres of fresh Gear Oil (EP90, API GL-4) of approved make, complete in all respects. | - | Job | - | - |
| 10 | Providing and fitting of complete Diesel Filter Set, including removal of old filter, cleaning of filter housing, complete in all respects. | - | Job | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.61 MB
NIT42.pdf
Tender Documents • 0.59 MB
BOQ_1040528.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].