Constructing 11 KV line from VLC to Pranavam using covered conductor under Electrical Section Perumbuzha of Electrical Division Kundara

Fitting and providing one HT stay for 11kV pole, including digging and back filling pit in ordinary soil.

Transporting LT ABC by hired vehicle to a distance up to 5 km and carring up to 2 drum including loading and un loading using crane.

Transferring LT Three phase 4/5 wire OH line to newly erected HT/LT pole including dismantling existing cross arm and insulators, refitting the same on the new pole, binding etc. complete.

Disconnecting and lowering down the single phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work.

Additional rate for refitting/redoing one Shackle Set, including reschacling ene span, while renewing any type of LT pole.

Disconnecting and lowering down the three phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work.

Re-joining one snapped LT conductor after removing damaged portion including Reshackling and conveyance of all materials complete.

Fitting and providing one strut using HT PSC pole including digging and back filling pit in ordinary soil.

Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle)

Pole numbering using printed Aluminium sheets of 22 SWG having size 20 x 12 cm or painting the surface of line supports where numbers are to be inscribed, pole numbers shall be painted in circular / rectangular background, using approved quality anti algal yellow paint in two coat after scraping and cleaning the surface at a height of 2.5 metre above ground level. The numbers and letters should be in black synthetic enamel paint. The size of the number should be at least 2cm in height x 1.5 cm in width. including cost of paint.