REPAIR TO FLOOR, WALL, JOINERY ETC IN CENTRAL INSTITUTES IN DOMESTIC AREA AT AF STN PHALODI

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) not exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) exc. 1.5 sqm but n. exc 4 sqm each complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors laid, bedded and pointed in any mortar complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section any position as in framed work complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of unreinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and disposed off from site complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry type C1 (1:3:6) using 20mm graded stone aggregate with solid blocks, exc. 10 cm in width and setting in cement mortar (1:6) complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 20 mm thick cement screed bed in CM (1:6) complete all as specified and directed.

M&L for machine cut kota stone slab 20-25mm thick in skirting, risers of steps, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 15 mm thick cement plaster in CM (1:4) complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B-1, using 20 mm graded stone aggregate as in leveling course complete all as specified and directed.

M&L for non-skid ceramic coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

M&L for Virified Ceramic dark shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

All as per item No.15.00 (here-in*bfore) but in vertical surfaces as in skirtings, incl backing coat 10 mm thick in CM (1:3) complete all as specified and directed.

M&L for glazed ceramic coloured joint free tiles in vertical surfaces 600x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement, incl backing coat of 10 mm thick in CM (1:3) complete all as specified and directed.

S&F for Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Second class hardwood 35mm thick glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc., with sash bars, divided into squares edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and supplied and fitted to chowkats complete all as specified and directed.

M&L for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F for anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.

S&F for anodised aluminium window and ventilator shutters, side hung/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F in repair anodised aluminium partition fixed type made from 101.60x44.45x1.5mm thick section fully glazed incl all necessary jointing cleat, glazing plate and clips, rubber, gasket packing, snap beading with 5.50mm thick glass tinted complete all as specified and directed.

S&F for printed 12mm thick toughened glass door with all necessary hydraulic floor spring incl top patch, bottom patch and 30cm long stainless steel handle set and central stainless steel lock including taking out old broken/ unservicable glass complete all as specified and directed.

S&F for SS-304 grade of Stainless steel railing of type A as per Drg No. CEAG/AR/TD-13R fixed including dismantling old railing complete all as specified and directed. Note: Length of SS railing shall be measured in RM for the payment purpose.

M&L for heritage finish of approved shade on walls / pillars and including 10 mm thick plaster in CM (1:4) finished even and smooth flat to receive heritage finish complete all as specified and directed.

S&F solar control film 50 micron reflective type exc 1.50 sqm, sticked to glass panes as per instruction of manufactures complete all as specified and directed.

S&F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer complete all as specified and directed.

S&F to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and complete all as specified and directed.

S&F 100mm size of mild steel butt hinges, medium weight, cold rolled complete all as specified and directed.

S&F Alumininum anodised, barrel tower bolts of extruded section 200 mm size complete all as specified and directed.

S&F Extruded aluminium alloy handles, fabricated type, anodised 150 mm long complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed Length of bolt 300mm complete all as specified and directed.

S&F in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple, beads on any type of door/windows complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty/wdn beads in square n.exc 0.5 sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description) from any type of frames complete all as specified and directed.

S&F Sheet glass 4mm thick, ordinary quality and glazing with oil putty/wdn beads in square exc 0.5 sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description) from any type of frames complete all as specified and directed.

S&F Sheet glass 5.5mm thick, ordinary quality and glazing with oil putty/ beads in square exc 0.5 sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description) from any type of frames complete all as specified and directed.

S&F Sheet glass 4mm thick ordinary quality and glazing with beading in squares n.exc 0.5 Sq.m in each pane complete all as specified and directed.

S&F Sheet glass 5.5mm thick ordinary quality and glazing with beading in squares exc 0.5 Sq.m in each pane complete all as specified and directed.

M&L for 18-20 mm thick white makrana marble work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble including cement screed 15 mm thick in CM (1:4) complete all as specified and directed.

M&L for green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cement screed 15 mm thick in CM (1:4) complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs,pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cement screed 15 mm thick in CM (1:4) complete all as specified and directed.

M&L for Rounding to edges of granite/stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8), type D2 (using 40mm graded agg) as in sub base complete all as specified and directed.

M&L for sand filling under floors including spearding and levelling in layers n exc. 25 cm thick complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade of cement concrete with grey cement and pigment complete all as specified and directed.

S&F 605X605mm anodised aluminium snap grid frame work for false ceiling using main tee of size 25x35x1.5mm & cross tee of size 25x35x1.5mm, aluminium anodised angle section 25x25x1.5mm including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

S&F PVC false ceiling consisting of 600mmx600mmx5mm thick prelaminated PVC sheet as panel fixed on 605X605mm anodised aluminium snap grid as frame work for false ceiling using main tee of size 25x35x1.5mm & cross tee of size 25x35x1.5mm, aluminium anodised angle section 25x25x1.5mm including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

S&F WPC fluted wall panelling of 15mm thick with and including frame work for fixing fluted wall panelling to wall complete as per manufacturers instructions and complete all as specified and directed. Note: Pattern/colour of fluted wall panel to be approved by GE.

S&F in repairs cast iron door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repairs double action Floor Spring Hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing poivet made of brass, other parts made of brass, other part made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repairs stainless steel curtain rod 25mm dia (minimum weight 0.36 Kg/RM) with brackets, fancy knobs and stand etc complete all as specified and directed.

M&L for preparing surfaces of new wood or wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying sealer wherever required to fill and smooth the surface including applying two coats of melamine polish with spray machine uniformingly upto glossy mirror finish complete all as specified and directed.

M&L for preparing surfaces of new wood or wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L rendering 10mm thick in CM (1:6) on fair faces of brick or concrete surfaces finished even & smooth w/o using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in CM (1:3) on fair faces of concrete surfaces as in ceiling and finished even and smooth with out using extra cement complete all as specified and directed.

M&L for Preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of primer with 3mm thick wall care putty to achieve smooth finish on internal surfaces of walls complete all as specified and directed.

Complete removal of existing treatment on walls and applying two coats of oil bound distemper over a coat of primer with 3mm thick wall putty to achieve smooth finish on internal surfaces of walls complete all as specified and directed.

M&L for Preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of primer with 1mm thick putty to achieve smooth finish on ceiling surfaces complete all as specified and directed.

Complete removal of existing treatment on ceiling and applying two coats of oil bound distemper over a coat of primer with 1mm thick putty to achieve smooth finish complete all as specified and directed.

S&F floor mounted coupled closets (EWC with flushing cistern, seat cover) fixed in repair complete all as specified and directed.

S&F in repair vitreous china table top wash basin, white, flat back, size 550 X 400mm including waste fitting and brackets but excluding tapes, chain and plug etc complete all as specified and directed.

S&F vitreous china urinal, full stall type, white incl flush pipe, waste pipe, brackets, CP sprader fixed in repair complete all as specified and directed.

S&F towel rack with lower hanger of stainless steel fixed in repair complete all as specified and directed.

S&F 3 in 1 wall mixer with provision of both hand shower and over head shower fixed in repair complete all as specified and directed.

S&F stainless steel Soap Dish fixed in repair complete all as specified and directed.

S&F toilet paper holder brass chromium plated fixed in repair complete all as specified and directed.

S&F Corner glass Shelves (with brackets) for bath room fixed in repair complete all as specified and directed.

S&F Brass chromium plated wash basin Mixer fixed in repair complete all as specified and directed.

S&F brass chromium plated Swan neck fancy type pillar taps of 15 mm bore fixed in repair complete all as specified and directed.

S&F 15mm Bib taps, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fixed in repairs complete all as specified and directed.

S&F in repairs 15mm bore angle valves, fancy type chromium plated cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

M/S SOLANKI GENERAL SUPPLIERS (BID ID -3328959)

KRISHNA CONSTRUCTION COMPANY (BID ID -3324107)

YOG INFRA (BID ID -3326883)

DEVARAM CONSTRUCTION COMPANY (BID ID -3329387)

M/S BHERA RAM & SONS (BID ID -3329154)

Narender Constrution Company (BID ID -3329002)

Lalit and Brothers (BID ID -3326702)